Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.6 LAccepted-Finance | L1 | Accepted-Finance BELOW RATE QUOTD | |
| 2 | L2₹17.6 L+₹1,356.64 (0.08%)Rejected-Finance | L2 | Rejected-Finance ABOVE RATE QUOTED |
Tender Value
₹18 L
EMD Value
₹18,000
Closing Date
28 Jul 2025, 3:00 pmClosed
THE BLOCK DEVELOPMENT OFFICER , KILPENNATHUR,B.PT
BLOCK DEVELOPMENT OFFICE, KILPENNATHUR
CONSTRUCTION OF NEW ONE CLASS ROOM BUILDING ADW MIDDLE SCHOOL IN KARNAMPOONDI HABITATION IN NARIYAMANGALAM PANCHAYAT
2025_RDTN_584237_1
ROC .NO.A6/4483/2025
Open Tender
Civil Works
Item Wise
KILPENNATHUR
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹18,000
Yes
29 Jul 2025
22 Jul 2025
28 Jul 2025
22 Jul 2025
28 Jul 2025
22 Jul 2025
Amount
Construction of New One Class Room Building ADW Middle school in karnampoondi Habitation in Nariyamangalam panchayat
Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compou
Supplying and filling in foundations and basement with filling M- sand in layers not exceeding 15 cm.thick,well watered,rammed and consolidated etc. complete complying with standard specifications.
CEMENT CONCRETE 1:4:8 mix using 40mm gauge hand broken hard granite stone jelly for FOUNDATION including dewatering if found necessary and laid in layers of not more than 15cm thick, well rammed etc., complete complying with standard specification.
Supplying, fabricating and placing in position mild steel/Ribbed tor steel rods for all RCC works including cost of steel and binding wire also in all floors, complete complying with standard specfication.
Supplying and erecting CENTERING for sides and soffits including supports and strutting upto 3.29 m high for plane surfaces such as RCC SLABS, RECTANGULAR BEAMS, TEE or ELL BEAMS, LINTELS, canopy etc., in all floors with all cross bracings using mild steel sheets of size 90cm x 60cm and BG 10 stiffened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding laid over countrywood joists of size 10cm x 6.50cm spaced at about 90cm centre to centre and supported by casuarian props of 10cm to 13cm dia spaced at 75cm centre to centre etc., complete
Sunshade
Roof slab ,lintel & beam
Column
Corewall
REINFORCED CEMENT CONCRETE 1:1.5:3 mix using 20mm gauge hand broken hard granite stone jelly for FOUNDATION FOOTINGS including dewatering if found necessary and laid in layers of not more than 15cm thick, well rammed etc., complete complying with standard specification.
BRICK WORK in cement mortar 1:5 (One cement and five sand) using second class country bricks of size 23cm x 11cm x 7cm for the following including curing etc., complete complying with standard specifications.
Supply and filling of good gritty gravel from approved quarry to work site including cost and conveyance of all charges etc complete.
Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete). The Putty should be got approved by the Executive Engineer (Based on SOR 2024- 2025
PLASTERING with cement mortar 1:5 (one cement and five sand)12mm thick in all floors complying with standard specifications.
CEMENT CONCRETE 1:2:4 mix using 20mm gauge hand broken hard granite stone jelly including dewatering if found necessary and well rammed etc., complete complying with standard specification.
WEATHERING COURSE CONCRETE using best quality broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be added) over the RCC roof slabs in the proportion of brick jelly to lime being 32:12.5 by volume and laid in a single layer and consolidated to the required designed and finished thickness by beating the concrete with wooden beaters if approved pattern keeping the surface constantly wet by sprinkling lime jaggery water as per standard specification etc., complete as directed by the departmental officers.
Finishing the top of roof with one course of Vitrified tiles of size 0.60m x0.60m of approved quality laid in cement mortar 1:3 (One cement and three sand) 12mm thick mixed with water proofing compound conforming to I.S. at 2% by weight of cement used and the top pointed with same mortar mixed with redoxide
Finishing the top of roof with best quality of Pressed tiles of size 230mm x 230mm x 6mm including cost and conveyance of all materials charges etc complete
Supply ,Fabrication of Mild steel Door including of all charges etc complete as per standard specification.
Supply ,Fabrication of Mild steel Window including of all charges etc complete as per standard specification.
Oil bound distemper painting over priming coat including cost and conveyance of all materials and labour charges etc complete.
Exterior Emulsion Two coats over priming coat including cost and conveyance of all materials and labour charges etc complete.
Painting two coats over New iron works using ready mixed enamel paint including cost and conveyance of paint and all labour charges etc complete
Supply and fixing of TNEB Meter board suitable for 32A single phase service connection with 32A fuse unit and neutral(side handle) on suitable of wall with earth connection only.SD NO 125
Supply and run of 2 of 4 sq.mm polythene insulated PVC sheathed heavy duty SC.Copper conductorof 1100 V grade on 7/20 GI bearer wire for service connection mains SD NO 65
Supply and run of 2X4 sq.mm (56/0.3) polythene insulatedPVC sheathed heavy duty SC.Copper conductor of 1100 V grade in 25mm dia GI pipe(Clss B) suitably bent on both ends with necessary Angle iron upright and end supportes for Mains SD NO 69
Supply and fixing of 40W flu.fitting complete with copper choke and condensor of 500 V with fuse and neutral(side handle ) on suitable T.W.box with earth connection only.SD NO 88
Supply and fixing of 1400mm AC ceiling fan complete of 300 V with fuse and neutral(side handle ) on suitable with earth connection only. SD NO 110
Wiring with 2x1.5(22/0.3) sqmm PVC unsheathed SC Copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with T.W. switch box with 5amps F.T. switch in flush with wall covered with hylum sheet of 3mm thick with painting of suitable colour with continuous earth wireconnection of 14 SWG wire for cocealed Light point/fan point (5 points per coil) SD NO 25
Wiring with 2x1.5(22/0.3) sqmm PVC unsheathed SC Copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with T.W. switch box with 5amps F.T. switch in flush with wall covered with hylum sheet of 3mm thick with painting of suitable colour with continuous earth wireconnection of 14 SWG wire for cocealed PVC Plug point SD NO 38
Provision for Rainwater down fall pipe of 110mm dia Including of all materials and labour charges etc complete.
Providing Bala Painting
Providing Cup Board Shutter with frame using water Proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter (Sl.No 124)
Providing and Laying of Interlocking Concrete Block (Surface Textured) Pavements having thickness 80mm and compacted over a thin bedding M.Sand layer of 30 mm thickness and joints shall be filled by fine M.Sand of specified grading as per table 1500.6 of Specification of Rural roads-2014 and Technical specification clause 1504.
Supplying and Fixing of Using 20/30mm thick cuddappah slab Cost of materials laying and Labour charges etc.,
GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}
M/S.VRH CONSTRUCTIONS (BID ID -1411797)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .