REPAIR/REPLACEMENT OF PLASTERING, PLUMBING, JOINERY, ROOF SHEET AND MISC WORKS TO E/M INSTALLATION UNDER AREA AGE B/R-I OF GE BENGDUBI

Amount

SCHEDULE 'A'

Demolition of cement concrete unreinforced in Ground floor & paving n.exc 15cm thickness and removal of debris from site all as specified and directed

M&L for 75mm thick PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate in plinth protection finished even and smooth without using extra cement.

M&L for 40mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) in flooring complete all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutter from the frame) area not exc. 1.5 sqm complete all as specified and directed.

S&F steel windows with side hung shutters including projection type hinges with steel handle, and steel pag stay, complete with bars, dovetailed or welder all as specified.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specification and drawing

S&F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes at top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC sheet channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling plain colour PVC sheet to be fitted in the MS frame welded / sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and directed.

Taking down chowkats of any description without taking of shutter from the frame exceeding 1.5 sqm but not exc. 4.0 sqm each all as specified and directed.

S&F Pressed steel door frame of size 165 x 60mm for doorswith one or more rebates including necessary fixing lugs, hings, lock strike plate, etc, complete all as specified.

S&F of 30 mm thick flush shutter solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 2nd class HW glazed and skeleton 30 mm thick window shutters open rebated and prepared to receive glass, gauze etc with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sites of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (b).

S & F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of apertune 1.40 mm and fixed with tinned tacks or galvanised wire staples including necessary beading all as directed.

Hacking out old broken glass (any thickness size quality and discription) for metal frame including punching, drilling out old glazing pins / spring clips and providing new ones complete all as specified and directed.

S&F sheet glass plain head type 3mm thick and glazing with oil putty in squares exc 0.5 Sqm in each pane complete all as specified and directed.

M&L for preparation of new wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed

M&L preparation of new steel surface and applying two coats of synthetic enamel paint over a coat of primer red oxide primer including preperation of surfacescomplete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing and rubbish off the premises.

M&L for glazed ceramic white wall tiles 300x450x7 mm including bedded and jointed in neat cement slurry and pointed with white cement with pigment to match the shade of tile over and including10 mm thick rendering in cement mortar 1:4 all as specified and directed.

Demolition / breaking up damaged SGSW pipe of any position of internal dia of pipe 150 mm including demolition of PCC, and removing dismantled material at a distance n exc 50 m all as directed.

M&L for concrete bed PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate to SWG drain pipe 150mm bore including packing under and haunching against the sides of pipes after they are laid and tested including removal of debris outside MD land all as specified and directed.

M&L for salt glazed stone ware drain pipe grade 'A' 150mm bore laid on concrete bed and jointed complete all as specified and directed.

M&L for non skid ceramic tiles joint free coloured tiles 7mm to 8mm area exceeding 0.11sqm but n.exc 0.18 sqm on floors over and including 15mm thick screed bed in cement mortar (1:6) set jointed in neat cement slurry and pointed with colour cement to match the tiles complete all as specified and directed.

M&L for providing Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed.

M&L for Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

M&L for PCC 100mm thick 1:3:6 type C2 using 40mm graded crushed stone aggregate as in floor, path dtc finishing the surface rough to receive tilies complete all as specified and directed.

M&L for pre polished coloured cement concrete chequered tile of approved quality size 300X300X 25mm thick on floors over and including 20 mm thick screed bed cement mortar 1:6 set and jointed in neat cement slurry and pointed with colour to match the tiles complete all as specified and directed.

Taking down cement plaster of any description in any position incl racking out joints hacking for key, scrubbing down with water etc and removal of debris from site all as specified and directed.

M&L rendering in cement mortar 1:4 on walls 15mm thick on fair faces of brick work finished the surface even and smooth with out using extra cement complete all as specified and directed.

M&L Rendering 15mm thick on other than fair faces in cement mortar 1:6 finished the surface even and fair complete all as specified and directed.

M&L Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper preparing surface of wall even and smooth over and smoothappying with 1mm thick wall care putty complete all as specified and directed.

M&L for Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of white cement primer including preparing surface of cement base even and smooth appying with 1mm thick wall care putty complete all as specified and directed.

M&L Preparation of old plastered surfaces of walls with complete removal existing treatement and applying two coats of oil bound distemper over a coat of 1mm thick putty including preparing surface of wall even and smooth appying with cement base wall care putty complete all as specified and directed.

M&L for washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of cement based paint (any tint) on walls complete all as specified and directed.

Dismantling of existing AC sheet ceiling board complete all as directed.

S&F anodised aluminium snap grid frame work size of grid 605x605 for false ceiling all as specifed hangers 4mm dia GI (up to 1200mm length) adujsting level fixed to roof slab/ rafter/purlins by means of GI flat 40x3 mm size 60mm long and exception hold fasteners 12.5mm dia 40 mm long complete all as specified.

M&L for non asbestos, fiber reinforced cement board ceiling, 4mm thick (610 mm x 610mm) all as per manufacturars instructions complete all as specified and directed.

M&L for two coats of oil bound distemper over a coat of primer on new ceiling board surfaces including surfaces preparation complete all as specified and directed.

Desmantling of AC corrugated sheet from roof including ridges complete all as specified and directed.

S&F Pre painted galvalume aluminium Zinc coating GI based trapezoidal profile (pitch 200mm and profile 30mm) steel sheet thickness in between 0.4mm to 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering / Cladding to wall / ridges etc fixed with self tapping screws complete all as specified and directed.

S&F of thickness 0.56mm Plain, Aluminium sheeting, alloy as in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed)

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F for trusses (framed), trussed, purlins, crene grantries, rails and fastenings and heavy bracket framing (beam, tee, angles, channel or flat sections) including distance pieces, cleats etc confirming to Fe 410-W (Gde E -250) quality-A complete all as specified and directed.

Demolition of brick works built in cement mortar including all quins, arches, pillar etc complete all as specified and directed.

M&L for old size fly ash brick work with sub class 'B' bricks, straight for curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

Dismantling mild steel work of any description as in gates, doors or otherwise fixed in any position complete all as specified

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings complete all as specified

Taking down steel tubing and connection 15mm bore complete all as specified and directed.

Taking down steel tubing and connection 25 bore complete all as specified and directed.

S&F tubes 15mm bore medium grade (ISI marked) galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified.

S&F tubes 25mm bore medium grade (ISI marked) galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified.

M&L for cutting, chases, pinning in block masonry wall for concealed water tubing and making good to facing and pointing in CM 1:3, cutting n. exc. 10 cm girth complete all as specified and directed.

S&F in repairs Bib tap 15 mm fancy type CP with crutch or butterfly handle screwed down srewed for iron pipe or for brass ferrule and fixed all as specified

S&F brass cromium plated tubular towel rail, 20mm dia, D type 60Cm long between flanges complete all as specified and directed.

S&F sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 mm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repairs 10 lits capacity PVC flushing cistern low level, white, with inlet, ball valve, float and handle flush pipe including brackets etc complete all as specified and directed.

Overhauling of rolling shutters by oiling/greasing of all moveable parts of rolloing shutter including minor repair, adjustment of CI pulleys to make the shutter in working condtion, size of opening upto 11.00 sqm including all necessary dismantling of shutter and refixing the same in position complete as directed. (New items fixed to be measured and paid seperately)

Supply only Safety lever locks mild steel with 4 leavers for rolling shutters

Supply only Ball bearing for rolling shutters

Supply and fixed in repair steel rolling shutters, with 1mm thick laths without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated, complete push pull or manual type complete all as specified and directed.

S&F mild steel sliding door bolts liding door bolts plate type 300mm bolt not less than 16mm dia with and including a minimum of 6 bolts and nuts all as specified and directed

S & F aluminium anodised barrel tower bolt 150 mm for PVC doors complete all as specified and directed.

S & F 150 mm aluminium handles cast type anodised complete all as specified and directed.

S&F mild steel barrel tower bolts of extruded section and fixed 200 mm size all as specified and directed.

S&F mild steel pressed handle oval type stove enamelled black 125 mm size all as specified and directed.

S&F butt hinges medium weight, cold rolled mild steel 100 mm size complete all as specified and directed.

S&F in repair vitreous China wash basin including CI bracket white, flat back size 550 x 400mm with 32 mm dia CP brass waste coupling, PVC waste pipe, CP pillar tap etc complete all as specified and directed.

S&F 1 5mm dia PVC connector with PTMT nuts of length 450mm complete all as specified.

S&F in repairs water closet (Squat Pattern) complete incl provn of lime concrete bedding Orissa pattern size 580 x 440mm white integral foot rests (excluding flush pipe or flushing cisterns) including connection to trap and flushing pipe anti syphonage pipe etc complete and making good to floor.

S&F PVC floor trap in floors with grating including jionting solvent cement for 75mm dia fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F 75mm dia PVC (SWR ) pipe bends any radius complete all as specified and directed.

S&F 75mm dia PVC (SWR )junction single,(Single T) equal or unequal complete all as specified and directed.

S&F angle stop valves, 15mm bore fancy type, chromium plated with long shank and cup concealed type, cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for iron pipe or for unions all as specified and directed.

Supply, hoisting and fixing ratational moulded PVC water storage tank, 500 litres capacity conforming to IS-12701 (1989) cylindrical vertical type multi-layered with closed top including inlet, PVC float valve and necessory fittings outlet and wash out holes of approved make including dismantling of existing tank of any description and removing from site of work complete all as specified and as directed.

S & F in repairs Kitchen Sink with drain board made of stainless steel 1mm thick with plugs washers and waste pipe incl bedding in CM to dwarf wall incl fitting cantilever brackets and connecting union to pipe over all size 915mm x 460 mm and bowl size 410 mm x 330mm x160mm complete all as specified and directed.

Dismantling of RCC posts or struts of any section including taking out embedded portion and making good of disturbed ground (posts embedded in natural ground) etc complete all as specified.

Dismantling of RCC posts or struts of any section incl. taking out embedded portion and making good of disturbed ground (posts embedded in PCC ground) etc complete all as specified.

Dismantling of fencing wire of any description and in any position complete all as directed.

Excavation in post holes each n.exc. 0.50 cum getting out, returing filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm watering and removing surplus soil to a distance n. exc 50m and making good surface in hard/dense soil etc complete all as specified.

M&L PCC (1:4:8) type D-2 (using 40 mm graded crushed stone aggregate) as in filling and mass concrete etc omplete all as specified and directed.

S&F mild steel angle sections, (Fe-290 Gde E-165) fixed independetly, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire with out connecting plates etc (cut to ordinary length) all as specified and directed.

S& F galvanised 2 strand barbed wire 2.24mm dia of wire with 2mm dia barbs at 75mm to 100mm spacings staining and fixing to any type of standard rails strainings bolts incl securing or trying at crossings with and provn of galvanised MS wire staples or steel pins etc all as specified and directed.

Ditto all as per item No 82 above but fixing only (Qty obtained from Sl No 78)

M&L for two coat of synthetic enamel paint over a coat of red oxide primer on steel surfaces exc 10 cm width or girth not otherwise described including necessary preparation on new surfaces complete all as specified.

Dismantling chain link fencing of any type fixed in any situation including flat iron MS round bars, mounted on nuts & bolts etc complete all as specified.

Supply only galvanised chain link fencing of size 100mm x100mm mesh made out of 10guage mild steel ganvanised wire complete all as specified and directed.

Fixing only chain link fencing including line wires any mesh size and type to any type of standards rails, straining bolts, etc including provision of binding wire etc complete all as specified.

M&L 10mm dia mild steel round bars as straining bars to secure chain link fencing with fencing posts incl running welding to the ends of bars with overlapping not less than 10cm etc complete all as specified.

(Note : The Scope of Work contained in 'Sch of Credit' amounting to Rs. 34565.00 (refer Tender Srl Page No 30). The Quoted sum shall be arrived at after deducting the amount of “Sch of Credit” from the total amount of the ‘BoQ’

NAYAK BROTHERS

AMULYA KUMAR ROY

M/S KAR CONSTRUCTION

PRADIP KUMAR BOSE

M/S LOKENATH ENTERPRISE

MUKHERJEE ENTERPRISE