Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.5 LAdmitted-Finance NO 2C THANGAVEL VAITHIYAR STREET TRIPLICANE CHENNAI 600 005 | CHENNAI | CHENNAI | TAMIL NADU | 600005 | L1 | Admitted-Finance | |
| 2 | L2₹34.9 L+₹3.4 L (10.9%)Admitted-Finance NO 5 3 JJ KHAN ROAD 1ST LANE ROYAPETTAH CHENNAI 600 014 | CHENNAI | TAMIL NADU | 600014 | L2 | Admitted-Finance | |
| 3 | L3₹35.1 L+₹3.6 L (11.5%)Admitted-Finance NO 3 JAMI JAM KHAN ROAD 1ST LANE ROYAPETTAH CHENNAI 600 014 | CHENNAI | CHENNAI | TAMIL NADU | 600014 | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | G.L.THIRUMALAI NAIDU AND COMPANY L3 | M/SJAYAM CONSTRUCTIONS L1 | G.JANAKIRAMAN CO L2 |
|---|---|---|---|---|---|---|
| 1.00 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exe 25 cm, in soft/ loose /soil. complete all as specified and directed. | 111 | Each | 90 ₹9,990 | 160 ₹17,760 | 50 ₹5,550 Lowest |
| 2.00 | M&L for Plain cement concrete 1:2:4, type B2 (using 40mm graded aggregate) as in foundation, filling & mass concrete | 24 | Cum | 7,200 ₹1,72,800 | 7,000 ₹1,68,000 | 6,500 ₹1,56,000 Lowest |
| 3.00 | S&F concertina coil of 610mm diameter made out of 2.6mm dia spring steel wire 230 G/m 2 (min) dipped with corrosion preventive fluid (rusilo 901) of Castrol make in white colour Each coil having a minimum 50 turns(circles) and an average weight not less than 8.57Kg including handle and spike at both end of coil| erected in position on top of mild steel angle by fixing with GI clip for securing including necessary welding to the MS Section and as per manufactures instruction complete all as specified | 220 | RM | 1,440 ₹3,16,800 | 700 ₹1,54,000 Lowest | 1,200 ₹2,64,000 |
| 4.00 | M&L for Rolled section of Fe-410- W(Gde E-250) quality B mild steel angles frame including inserting in PCC foundation cutting tops to shape as directed, drilling holes, notching for wire, etc. complete all as specified | 2,400 | Kg | 144 ₹3,45,600 | 142 ₹3,40,800 Lowest | 145 ₹3,48,000 |
| 5.00 | S&F galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails, straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc complete all as specified (each line wire to be measured) | 36 | 100Rm | 1,530 ₹55,080 Lowest | 1,800 ₹64,800 | 2,500 ₹90,000 |
| 6.00 | M&t for preparation of new steel surfaces and applying two coats of anti corrosive paint over a coat of approprite primer complete all as specified | 300 | Sqm | 90 ₹27,000 | 70 ₹21,000 Lowest | 105 ₹31,500 |
| 7.00 | Removing building materials (other than spoil payable under item no 03028 to 03031 in section 3 earthwork) to a distance of 1km or under beyond the lead Included in the rates, including loading, unloading and stacking at the destination | 300 | Load | 1,260 ₹3,78,000 | 430 ₹1,29,000 Lowest | 1,200 ₹3,60,000 |
| 8.00 | Surface dressing not exceeding 15 cm deep in soft/loose soil all as specified and directed. | 150 | Sqm | 90 ₹13,500 | 70 ₹10,500 Lowest | 150 ₹22,500 |
| 9.00 | Demolition of reinforced concrete in roofs, floors, (other than ground floors) beams, stair cases, landing chajjas and similar suspended works all as spd. | 2.4 | Cum | 540 ₹1,296 Lowest | 700 ₹1,680 | 650 ₹1,560 |
| 10.00 | M&L RCC 1:2:4 type B 1 (using 20 mm graded stone aggregaate) as in cooking platform slab | 0.8 | Cum | 7,200 ₹5,760 | 7,000 ₹5,600 Lowest | 7,500 ₹6,000 |
Tender Value
₹32.0 L
EMD Value
₹64,000
Closing Date
17 Sept 2026, 6:55 pmClosed
GE Chennai
GARRISON ENGINEER FORT SAINT GEORGE CHENNAI - 600009
PROVN OF SECURITY FENCE ON BOUNDARY LINE BETWEEN SEVEN WELLS AND TN STATE URBAN HOUSING AND SPECIAL REPAIRS TO BLDG NO P-20 DEFENCE CIVILIAN MD ACCN AT SEVEN WELLS UNDER GE CHENNAI
2026_MES_782744_2
8994/E8
Open Tender
Civil Works
Item Rate
180 days
GE Chennai
As per NIT
7 documents required · 7 mandatory
₹500
GE Chennai
₹64,000
Yes
24 Sept 2026
21 Aug 2026
19 Sept 2026
21 Aug 2026
17 Sept 2026
28 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 9 | Demolition of reinforced concrete in roofs, floors, (other than ground floors) beams, stair cases, landing chajjas and similar suspended works all as spd. | 2.4 | Cum | - | - |
| 10 | M&L RCC 1:2:4 type B 1 (using 20 mm graded stone aggregaate) as in cooking platform slab | 0.8 | Cum | - | - |
| 11 | M&L RCC M-30 design mix using 20 mm graded stone aggregate in Chajja's all as specified | 0.8 | Cum | - | - |
| 12 | M&L RCC M-30 design mix using 20 mm graded aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span | 0.8 | Cum | - | - |
| 13 | Formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. Rough finished surfaces of concrete flat all as specified. | 18 | Sqm | - | - |
| 14 | Formwork to soffits of suspended slabs to fair finish the surfaces such as roof slab floor slab n. exc 200mm thickness all as specified and as directed by the Engineer -in - Charge. | 15 | Sqm | - | - |
| 15 | Form work to chullah hoods, chajja's, trough and similar item including edges(rough finished flat surfaces of concrete ) all as specified. | 15 | Sqm | - | - |
| 16 | Form work to edges of concrete flat, treads, breaks in floors, window cills, concrete railings, openings in concrere walls, floors and roofs not exceedings 20cm wide and sides of RCC/PCC bands in walls, horizontal or slopping and similar work exc 10cm but not exc 20cm wide(rough finished surface of concrete) all as specified. | 10 | RM | - | - |
| 17 | M&L Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality | 200 | Kg | - | - |
| 18 | M&L Mild steel TMT bars 6mm to 8mm dia,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality | 200 | Kg | - | - |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.61 MB
Tender8994secondcall.pdf
Tender Documents • 1.07 MB
BOQ_880508.xls
BOQ • 0.39 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .