Repair to fencing, path, kerb and certain misc B/R works related items to CGP in Adm and technical area at AFA under GE (AFA) Hyderabad

Amount

M & L for preparing old painted concrete surfaces of road side kerb stone including aeroplane bases, and applying one coat of synthetic enamel paint all as specified and directed by Engineer-in-Charge.

M & L for preparing old plastered or unplastered surfaces on walls including cornices and applying one coat of cement based paint all as specified and directed by Engineer-in-Charge.

M & L for preparing old plastered or unplastered surfaces on walls including cornices and applying one coat of white wash all as specified and directed by Engineer-in-Charge.

Preparation of old chequered/lnterlocking path surfaces/concrete surfaces, plastered surfaces of walls/floors etc including and applying one coat of exterior emulsion paint (wheather coat) complete all as specified.

M & L for preparing old painted steel and iron surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed by Engineer-in-Charge.

Demolition of brick work or stone boulder masonry, built in cement mortar including all quoins, arches, pillars, etc and removing unservicble debris to a distance exc 1.5 Km and not exc. 5 Km and depositing where directed at a leval n exc 1.5 M above the starting point complete all as directed by Engr-in-Charge.

Demolition of Plain cement concrete of any description and in any position not otherwise specifically provided and removing unservicble debris to a distance exc 1.5 Km and not exc. 5 Km and depositing where directed at a leval n exc 1.5 M above the starting point complete all as directed by Engr-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided all as specified and directed by Engr-in-Charge.

Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key ,scrubbing down with water , etc and removing unservicble debris to a distance exc 1.5 Km and not exc. 5 Km and depositing where directed at a leval n exc 1.5 M above the starting point complete all as directed by Engr-in-Charge.

M & L Plain Cement Concrete (1:3:6) type C 1 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed by Engr-in-Charge.

M&L for pre-cast cement concrete block masonry of Type C1 1:3:6 (using 20mm graded stone aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge.

M&L rendering 15 mm thick in cement mortorr1:4 on fair faces of brickwork or concrete surfaces finished even and smooth without using extra cement all as specified and directed by Engr-in-Charge.

M&L for 75mm thick PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as plinth protection, paving/hardstanding etc finished fair and even including joint cutting, at every 3.0m interval and joint shall be filled with mastic filling compraising of 01 part of heated bitumen blown grade any penetration and 3 parts of sand (all by Weight) complete all as specified and directed.

M&L for precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in kerbs set in cement mortar 1:4 including necessary earthwork etc and making good the existing distrubed surfaces complete all as specified and directed.

M & L for 75mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in sub base floor, pavements etc , and finishing surfaces of concrete fair and even without using extra cement all as specified and directed by Engr-in-Charge.

M&L for Chequered cementconcrete tiles 30cm x30cm x 25mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors laid over and including 15 mm thick screed bed in cement mortar 1:6 including demolition of old tiles all as specified and directed by Engr-in-Charge.

M & L for preparing new plastered or unplastered surfaces of walls including cornices and applying two coats of cement base paint over a coat of primer complete all as specified and as directed .

M&L for cement concrete (1:2:4) type B1 (using 20 mm graded stone aggregates), in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including necessary formwork, weathering, slightly rounded or chamfered angles and throating as directed

S & F Mild Steel works of gates, doors, flat iron fillets, angle iron for post strut in fencing , wind tie etc including all necessary drilling, bolting or riveting ., and similar work conforming to Fe 410-0 or Fe 310-0 all as specified and directed by Engr-in-Charge.

M& L Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with attachment Fe 410 -W (GdeE- 250) quality B complete all as specified and as directed.

M&L for Preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

Deepika Enterprises

GUTHIKONDA BROTHERS

M/S NAVEEN BUILDERS

S J REDDY