REPAIR/REPLACEMENT OF BARBED WIRE, FENCING, CHAIN LINK FENCING GATES AND OTHER MISC WORKS IN TECH AREA AT AF STN UTARLAI

Amount

Dismantling fencing posts or struts ( wood, steel or RCC) any section , including taking out embedded portion as in concrete and making good distrubed ground and removal away to store complete all as directed

Refixing old MS steel /RCC fencing post or struts in any section or size including welding and cutting ,complete all as directed

Dismantling barbed wire fencing of any description complete all as directed

Excavating in post holes (or similar holes) each n.exc 0.5 Cum getting out hard dense soil and removing surplus soil to a distance n exc 50m and making good surfaces in hard/dense soil

M & L for cement concrete 1:4:8 type D2 using (40mm graded stone aggregate) as in foundation filling mass concrete complete all as specified

S&F mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc; flate iron fillets (for securing chain link fencing) including all necessary drilling, bolting or riveting etc, and similar work conforming to Fe-290 Gde E-165

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed

Supply only Chain link MS galvanisd fencing, any size or type of best quaility conforming to IS all as specified.

S & F 10 mm dia & over mild steel round or square bars fixed behind fencing as guard bars etc and similar articles complete

S & F of mild steel screw bolt (machine made with hexagonal or square head at one end and screwed the other or screwed both ends each screw and to be fitted with washer and one hexagonal or square nut length of but exc 5cm not exc 10cm and dia of shank 11 to 15mm complete

S & F in galvanised two strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts incl securing or laying at crossing with and provision of mild steel wire stapploes or steel pins etc complete all as specified and directed. ( each line wire to be measured)

M&L for two coats of synthetic enamel paint over a coat of red oxide on new steel surfaces of any description, not otherwise described over 10cm width or girth, complete all as specified and as directed.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removal from site exc. 50 m complete all as specified and directed.

M&L 75mm thick for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base , floor and paving etc complete all as specified and directed.

Dismantling of stone stabs, tiles of any description or thickness in floors, aprons etc laid dry or laid dry and pointed complete all as and directed.

M&L for 60 mm thick, M-35 Machine pressed precast interlocking paver block any shape and size confirming to IS 15658-2006 fixed with cement and no pigment glossy finish coloured as approved by GE fixed on sand cushion 40 mm thick & ends to be closed with PCC 1:2:4 type B-2 (Using 40mm graded stone aggregate) as site reqd to filing the gaps between tiles and road edgs complete all as specified and directed.

Taking down mild steel gate shutter of area not exceeding 5 sqm each shutter and re-fixing in the same opening after repair complete all as specified.

Taking down mild steel gate shutter of area exceeding 5 sqm but not exceeding 10 Sqm each shutter and re-fixing in the same opening after repair complete all as specified.

M & L Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset lates, riveting, etc. conforming to Fe.290.Gde-E-165 all as specified.

M & L for mild steel works in band, straps, supports or stage for rain waters , ventilating pipes incl bolts if required hooks (stay) having for large gates , hook and pintle hinges, large hasp and staples , chains, hand made sliding bolts clamps, hold fasts , wall ties hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters , knee piece inserts , two and three ways straps , plate washers and similar small articles conforming to grade E-165 (Fe-290) all as specified.

M & L for welding in repair n exc 6 mm thickness of metal weld all as specified.

M & L for welding in repair n exc 2.5 mm in length of metal weld and n exc 6 mm thickness of metal weld all as specified.

M & L for welding in repair n exc 2.5 mm in length of metal weld and exc 6 mm to 9 mm thickness of metal weld all as specified.

M & L for cutting holes in to stone walls built in cement or lime mortar for inserting pipe channel etc and making good in CM 1:3 or cement concrete 1:2:4 type B-1 as required & superficial area exc 150 sq cm but n exc 400 sq cm all as specified.

S & Fin repair 100mm Mild steel roller wheel suitable for iron gate of standard quality and welded to iron gate as directed by Engineer-in-Charge

M/S Tanisha Traders

Rasam Engg Co.

M.D. CONSTRUCTION CO.

AMBEY MAA CONSTRUCTION COMPANY

M/s Malinath Electricals