RENOVATION OF DSC OTM BUILDING NO P509 AT PXE CHANDIPUR

Amount

PART-I (B/R PORTION) Rughening surfaces of old concrete floor by picking,sweeping clean and washing down with water to remove dust and brushing neat cement sluury with 3.0 kg of cement per sqm

Dismantling stone slabs of any description laid, bedded and pointed in any mortar.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing ) and rubbish off the premises.

M&L for 15 mm thick screed bed or bedding layer of mortar in CM 1:6 for laying floor finishes for non skid ceramic and grinaite tiles .

M&L Rendering 10 mm thick cement plaster in CM 1:3 on fair faces of brick Work for fixing of wall tiling.

M&L granite slab 20(+/-2mm) mm thick machine cut bedded and jointed with greay cement slurry and pointed with white cement with admixture of pigments to match the shade of granite stone including cutting and polishing complete.

M&L 20(+/-2) mm thick machine cut white marble tiles as in boarder of size 100mm wide in kota stone flooring laid over screed bed laid jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed

M&L for joint free Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles

All as per item No 8 above but on skirting

M&L Non Skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exc 0.11 sqm ( 300 x 300 mm ) in floors etc set & jointed in neat cement slurry and pointed in coloured cement.Make-Kajaria/Somani/Orient

M&L 20(+/-2) mm thick machine cut kota stone slab flooring over screed bed laid jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

All as per item no 11 here and above but on skirting

M&L Glazed ceramic coloured tiles 450 x 350 X 7 thick white or coloured tiles as in dado, skirting and vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles. (Kajaria/Somany/Orient)

M&L PCC 25 mm thick PCC 1:2:4 type B-0 ( Using 12.5 mm graded aggregates), for laying floor finishes such as tiles etc

M&L 40 mm thick PCC 1:2:4 type B-1 ( Using 20 mm graded aggregates), in floor and steps, landing etc incl finishing the surface even and smooth without using extra cement.

Dismantling boarding, any description, fixed in any position with nails .

S&F 12 mm thick prelaminated particle board , interior garde , prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screw to timber frame work for cup board shutters/writting table all as specified and directed. .Make-Kitply/Greenply/National

M&L plain fillets square rectangular or triangular in section clean sawn secured with nails or brads (2nd class hard wood) sectional area exc 3 sqm n exc 6 sqcm all as specified.

Ditto as item no. 18 above here-in-before but exc 13 n exc 25 sqcm

S&F 100 mm long aluminium,anodised barrel tower bolts of extruded section.

S&F 40 mm size continous(piano) stainless steel hinges medium weight , cold rolled and fixed.

S&F bands,straps,supports or stays for wall hanging collapsible/folding writing table including bolts,if required chains,clamps,hold fast,wall ties conforming to Fe-290 Gde-E-165 complete all as specified and directed

Demolition of cement concrete (un reinforced) in floor and paving n exc 15 cm thick (above or below GL) complete all as specified and directed

M&L PCC 1:3:6 type C-2 for surface channel and drain .

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms,moulds,mitred/ stop ends

M&L for PCC avg 75 mm thick type C2 1:3:6 (40mm stone aggregate) as in plinth protection, finished even and smooth without using extra cement.

Demolition of cement concrete (reinforced) in floor and paving n exc 15 cm thick (above or below GL) complete all as specified and directed

M&L RCC 1:2:4, type B-1 (using 20 mm graded aggregates) as in shelves.

M&L RCC 1:2:4, type B-1 (using 20 mm graded aggregates) as in chajjas and similar suspended work in any situation.

Form work to chajja, weather shades, cooking platform, shelves incl fair finish surface of the concrete slab.etc

M&L mild steel TMT bar 10 mm dia and over cut to length bent to shape includingbbending & binding with MS wire (annealed) not less than 0.90 mm dia complete all as specified and directed

All as per item No 31 above but 6 to 8 mm dia bar.

M&L running welding for new reinf with old reinf for binding exc 6mm but not exc 9 mm thickness

M&L One coat Nito bond EP applied on old concrete surface by brushing or spraying before placing new concrete .(it is required for bonding new concrete & old concrete).

M&L two coat "Pidifin 2K " (Dr. Fixit) applied on external surface of brick wall before plastering as per manufactureres instruction.

Demolition of brick work built in cement mortar incl quoin, arches etc complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan exc 6 mtr mean radius, built in CM 1:6 all as specified and directed

Taking up or down steel water tubing and connecting incl cleaning for refixing or removal to stores for 15 mm bore.

Taking up or down steel water tubing and connecting incl cleaning for refixing or removal to stores for 20 mm bore.

Cutting chases in walls cor concealed water tubing and making good in CM 1:3 exc 10 cm but n.exc 20cm girth.

S&F 25mm bore PPR polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stabilised & antimicrobial welded having thermal stability for hot & cold water supply including all PPR plain & brass threaded polypropylene random fittings fixed complete to walls,ceiling or in floor etc

S&F 20mm bore PPR polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stabilised & antimicrobial welded having thermal stability for hot & cold water supply including all PPR plain & brass threaded polypropylene random fittings fixed complete to walls,ceiling or in floor etc

S&F GI pipe medium grade 50 mm dia bore as in walls for spout including taking down .

Dismantling water tanks exc 500 litres and n exc 1000 litres.

S&F 1000 litre capacity rotational moulded polythylene water storage tank ( cylindrical vertical with closed top) hoisted and fixed in position all as per specified in SSR part-I.Make-Sintex/Polycon/Polyfoam

S&F PVC ball valves high pressure with polythene float and fly nut complete, screwed for iron pipe of 20mm bore in repair ( PRAYAG).

M&L PCC (1:5 :10 ) type E2 using 40mm graded aggregate as in sunken floor filling

Taking down shutter of any description exc 1.00 sqm but n exc 2sqm complete all as specified and directed.

Taking down chowkath or frame exc 1.5 sqm n exc 4 sqm with shutter ( without taking of shutters from frames ) complete all as specified and directed.

Taking down chowkath or frame n exc 1.5 sqm with shutter ( without taking of shutters from frames ) complete all as specified and directed.

S&F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, frame rabated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S&F 35mm thick 2nd class HW gauzed and Skelton shutter open rebated and prepared and to receive gauze etc sash bar.

S&F 35 mm thick factory made panell shutter 12 mm commercial ply klin seasoned and chemically pressure treated.

S&F factory made solid panel PVC door shutter prelaminated one side 30 mm thick(style) conisiting of frame made out of M S tubes for top and bottomrails. MS frame shall be covered with heat moulded bothside prelaminated PVC sheet ;C; channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for top rail, lock rail and bottom rail. Pannelling of plain colour but both side Prelam PVC sheet used instead of Plain colour PVC sheet. Stile and rails feathered at edges ®/sealed to the stile and rail with suitable PVC sheet bedding and jointed with solvent cement as per specification and drawing.

S&F solid PVC door frame of size 50 mm x 50 mm made out of 5 mm sheet reinforced with MS Square tube, suppling & fixing in opening as per specification & drawing.

Supply and Fixing powder coated aluminium frame for doors, windows & ventilator with one or more rebates including joining cleat for fixing etc. complete all as specified.Make- Jindal/Hinadalco

Supply and Fixing powder coated aluminium window and ventilator shutter , aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, ruber packing, to recieve glass/wiremesh , screws , anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) in each shutter complete all as specified & as directed ( Make- Jindal/ Hinadalco)

Supply and Fixing powder coated aluminium door shutter of aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, ruber packing, anodised aluminium snap beading, screws etc including necessary fittings and fixes of handles,hinges,tower bolt and aldress complete all as specified & directed (Make - Jindal/Hindalco)

S&F 19 mm thick veneered block board interior garde , solid core , general purpose type, with face veneers of type BB fixed with screw to timber frame work.

S&F 75 x 75 mm aluminium anodised grill of DG -916, 10 mm thick to aluminium window (Make - Deco grill)

M&L Plain cement concrete 1:3:6,type C1 ( Using 20 mm graded aggregates ) in bed blocks for fixing hold fasts etc including necessary form work.

M&L MS flat iron for hold fast and similar item conforming to Fe-290-0 .

M&L for aluminium anodised barrel tower bolt 150 mm long.

S&F 125mm long extruded Aluminium anodized barrel tower bolt of extruded section and fixed.

S&F 300 mm long Aluminium alloy anodised sliding door bolts with hasp,staple (bolt type).

S&F 100 mm size stainless steel butt hinges medium weight , cold rolled and fixed.

Butt hinges, extruded aluminium alloy with galvanised 100 mm long mild steel hinge pin, anodised and fixed, type B-21

S&F 125 mm size alumunium handle, cast type, anodised.

S&F 100 mm size alumunium handle, cast type, anodised.

S&F 125 mm hasp & staple , safety type aluminium anodised including bolt to hinge plate and fixed with screw.

S&F 140 mm floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring , fixed in floor.

S&F galvanised stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire stapple .

S&F 20 mm dia stainless steel curtain rod fixed in repair

S&F fancy curtain rod bracket fixed in repair all as specified and directed

Taking down cement plaster on wall; ceiling,etc incl racking out joints hacking for keys, scrubbing with etc complete all as specified and directed

M&L Rendering 15 mm thick cement plaster with WPC @ 3% of wt of cement on external surfaces of brick work in CM 1:4 andn surface to be finished even & smooth without using extra cement. (WPC will be measured and paid separately).

Supply only WPC

M&L Rendering 5 mm thick cement plaster in CM 1:3 on fair faces ceiling , Chajja, shelves and surface to be even and fair .

M&L Rendering 15 mm thick cement plaster on internal surfaces of brick work in CM 1:6 andn surface to be finished even & smooth without using extra cement.

M&L Preparation of old plastered surfaces of ceiling and applying one coats of white wash .

M&L Preparation of new plastered surfaces of ceiling and applying three coats of white wash .

M&L Preparation of old plastered surfaces of walls and applying one coats of white wash.

M&L Preparation of new plastered surfaces of walls and applying three coats of white wash.

M&L applying two coats of acrylic distemper (oil bound distemper) over a coat of alkali resistant primer , rubbing, with sand paper finish smooth incl preparation of surfaces in new plaster surface.

Removing completely existing treatement applying two coats of acrylic distemper (oil bound distemper) over a coat of alkali resistant primer , rubbing, with sand paper finish smooth incl preparation of surfacesd surface including preparation of surfaces.

Complete removal of existing treatment and applying two coat of exterior emulsion paint on external wall surface over a coat of primer over a coat of thin layer of ready made wall putty as directed by Engr-in-charge

Preparation of new plaster surface of wall and apply two coat of exterior emulsion paint over a coat of primer over a coat of thin layer of ready made wall putty on external surface.

Supply & Fixed 5.50 mm thick plain sheet glass exc 0.5 sqm in each pane fixed to aluminium door,window & ventilator complete all as specified and directed.Make-Saintgobin/Modi guard/Atul

M&L Preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer.

Preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint .

Treating backs of chowkats etc area tarred exc 0.1 sq.mtr but not exc.0.5 sq.mtr and treated with coal tar or tar.

All as per item No. 84 here-in-before but small articles such as hold fasts etc area n.exc. 0.1 sq.mtr each including sanding tarred surfaces.

Writing letters or figures (Block, Roman, Italic or Indian) n exc 30 cm high.

S&F in repair 15 mm dia fancy type CP bib taps, cast copper alloy with crutch or butterfly handle, screwed down fixed in repairs.(Prayag/ Jaquar/ Mark/Jainko)

S&F in repairs 15 mm dia CP pillar taps, cast copper alloy with capstan head, chromium plated screwed down fixed high pressure, long screwed shanks and fly nuts, screwed for iron pipe in repairs.(Prayag/ Jaquar/ Mark/Jainko)

S&F in repairs 15 mm dia CP concealed type stop valves/ angular stop valves , cast copper alloy, screwed down,high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or unions in repairs.(Prayag/ Jaquar/ Mark/Jainko)

S&F PVC grating doom 100 mm dia .

S&F PVC connection pipe 15mm size with PTMT nuts 450mm long

Taking down rainwater pipes including all fittings .

S&F PVC (SWR & RWP) pipes single socketed in any length with rubber ring joints of dia 110mm fixed (SUPRME/PRINCE/ ORIPLAST)

S&F PVC (SWR & RWP) bends any radius of bore 110 mm incl. With access door fixed in repair.(SUPRME/PRINCE/ ORIPLAST)

S&F PVC (SWR & RWP) junction double (double 'T') equal or un equal of bore 110 mm incl. With access door fixed in repair.(SUPRME/PRINCE/ ORIPLAST)

S&F PVC (SWR & RWP) floor trap plain with grating inclu. Jointing with solvent cement of out let dia 75mm fixed in repair. (SUPRME/PRINCE/ ORIPLAST)

M&L for vitreous china squatting pan of Orissa pattern size 580 X 440 mm white 'P'trap with intregal foot rest (excluding flushing cystern and flush pipe) in repairs . make: Paryware/Hindware

M&L PVC valve less syphonic action type flushing cistern 10 ltr capacity low leve white with inlet ball valve , float flush pipe and handle including bracket ( Hindware/Parryware) fixed in repair.

S&F vitreous china wash hand basin white, flat back, size 550x400 mm with brackets including cutting for and pinning in end of brackets and waste coupling,waste pipe etc in repairs ( make: Paryware/Hindware ).

M&L for vitreous china urinal half stall type white(excluding flushing cistern including waste pipe and flush pipe) in repairs . make: Paryware/Hindware

S&F HDPE pipe of pressure 6 Kgf / sqcm fixed complete to walls/floor 50 mm dia

S&F glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard railing 60 cm long in repairs.

S&F brass chromium plated shower rose 125 mm size fixed in repair. (Prayag/ Jaquar/ Mark)

S&F stainless steel sink, 1.00 mm thick for kitchen with plug, waste pipe, washer including cantilever cast iron bracket, connecting union overall size 915 mm x 460 mm with bowl size 410 mm x 330 mm x 160 mm fixed in repair Make-Nirali/Blue star/Jainko

S&F stainless steel kitchen plate rack of 0.85 mm thick of approved make with plugs, washers, over all size 750mm x 600m complete all as directed by Engr-in-Charge complete all as specified and ad directed fixed in epair .(Prayag Cat No P-330))

Demolition of cement concrete of any description and in any position not otherwise specifically provided for

M&L roof treatment using APP based polymeric membrane minimum weight 3.5 kg/sqm and 3 mm thick reinforced with polyster non woven fabric (weight not less than 150 gms/sqm) over a coat of primed and bonding surface by forced application, including taking down old felt complete all as specified and directed by Eng-in-charge.

M&L avg 25 mm thick PCC (1:2:4) type B-0 (using 12.5 mm graded crushed stone aggregate) as in roof paddding complete all as specified

M&L Rendering 10 mm thick cement plaster in CM 1:4 on roof surface finished even and fair .

S&F MS hat pegs,solid body,125mm to 175mm as specified and directed

S&F in repair CP tubular towel ring of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats(minimum weight 90gms).(Make-Prayag/Jaquar/Jainko)

S&F aluminium anodised tubular towel rail 20mm dia "D" type 60 cm long between flange fixed in repair.(Make-Prayag/Jaquar/Jainko)

S&F CP soap case in repair ( Make-PrayagCat No BA-45)

PART-II E/M PORTION Taking down unserviceable LT cable of any size.

S&L of cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 volt grade with stranded aluminium conductor of size 50 Sqmm 3.5 Core make:- PLAZA/POLYCAB/GLOSTER or equivalent.

S&L of cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 volt grade with stranded aluminium conductor of size 35 Sqmm 3.5 Core make:- PLAZA/POLYCAB/GLOSTER or equivalent.

Excavation in trenches not exc 1.5m deep and n.exc 1.5m wide and getting out in soft/loose soil for foundation etc or for shafts, wells cess pits, manholes etc n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft/loose soil. laying of cable line etc complete.

Supply and laying approved quality sand underneath and all around the U/G cable in trenches for cable cushioning all as specified and directed

M&L Sub class ‘B’ bricks laid flat, transversely along the length of cable with width equal to the length of bricks over sand cushioning as protection cover of cable.

Returning, filling in, including spreading, leveling watering and well ramming in layer not exceeding 25 Cm.

Removing of excavated material not exceeding 50 mtr and depositing where directed at level not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point.

M&L for GI pipe 40mm dia light grade with all fittings and complete to walls and ceilings or laid in trenches/ for cable protection.

M&L for earthing with galvanized steel earth plate electrode of size 600 mm x 600 mm x 6.0 mm buried directly in ground (earth pit not less than 2.25 Mtr below normal ground level ) connected to galvanized earth lead 4 mm dia wire as Earthing lead by means of bolts, nuts, check nuts and washers of galvanized iron or steel including 20 mm dia medium grade GI tubing for protection of earth lead, MS sheet metal funnel with wire mesh, watering pipe medium grade 20 mm dia, charcoal or coke and common salt in alternative layer of 15 Cm compacted thickness all around the electrode with concrete earth pit of PCC 1:3:6 type C1, 50 mm thick precast RCC (1:2:4) type B1 pit cover reinforced with 8 mm dia deformed bar and suitable handle made of 10 mm dia round bar including galvanised lead wire of size 4 mm for extension of earth lead and necessary excavation, earth work, in soft/loose soil and disposal of spoils to a disance not exc 50 mtr and necessary connection and testing complete all as shown in electrical plate No. 3 of SSR Pt-I, and all as directed and specified

PART-III E/M PORTION Taking down carefully copper/aluminium point wiring (Light, Fan, lamp holder,socket or power) complete including taking out unserviceable fitting fixture removing materials to store for keeping in safe custody for reuse at site or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

M&L for point wiring with PVC insulated unsheathed FRLS stranded copper conductor cable of size 1.5 Sqmm, with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm for earth continuity wire, to be drawn in and including PVC conduit heavy duty with concealed wiring, MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick or PVC moulded switch board and brass screws with cap washers for one light/Fan point controlled by one single way switch including all necessary wall cutting and making good disturbed surface all as directed and specified.

All as per item No. 133 above but for Same board 5 Amps switch socket out let using 1.5 Sq mm wire with 1.5 Sqmm wire for earth continuity conductor.

All as per item No. 133 above but for independent 5 Amps switch socket out let using 1.5 Sq mm wire with 1.5 Sqmm wire for earth continuity conductor.

All as per item No. 133 above but for 5/15 Amps switch socket out let using 2.5 Sqmm wire with 2.5 Sqmm wire for earth continuity conductor on independent board.

Supply and fixing including connection of switch piano flush button type single pole one way 5 Amps,230 volts. Make- Anchor/Cona/Roma

Supply and fixing including connection of switch socket combination 2 in1 ,5 Amps ,230 volts, 2/3 pin flush type. Make- Anchor/Cona/Roma

Supply and fixing including connection of switch socket combination,5 in 1,5 pin 5 and 15 amps,230 volts, flush type universal. Make- Anchor/Cona/Roma

Supply and fixing including connection of socket outlet 5 in 1,5 pin 5 and 15 amps,230 volts, flush type universal. Make- Anchor/Cona/Roma

Supply and fixing including connection of switch piano flush button type single pole one way 15 Amps,230 volts. Make- Anchor/Cona/Roma

Supply and fixing of ceilings rose, surface bakelite 65 mm x 50 mm three terminal, 230 volts Make- Anchor/Cona/Roma

Supply and fixing of Step type electronic Fan regulator,230 volts,50 Hz, flush type on the existing phonolic laminated sheet etc. as required. Make- Anchor/Cona/Roma

Taking down old serviceable Ceiling fan/ Exhaust fan including carrying out servicing,cleaning of all dust and painting with one coat of synthetic enamel paint by spraying including filling cavities with filler, by replacing necessary worn out nuts,bolts,washers,split pins,groomets etc & writing necessary MES No at two places on the fan with replacing the twin twisted PVC flexible cable from ceiling rose to fan connector and two Nos PVC canopy to be replaced and refixing fan in its own position after completion of necessary ceiling work

Taking down unserviceable sub main /Sub circuit wiring of any type and size including conduit, batten wiring for necessary repair/replacement.

M&L for sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable of size 2 x 4.0 Sqmm and earth continuity conductor of size 1 x 4.0 Sqmm to be drawn into PVC conduit conceald wiring.

M&L for sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable of size 4 x 4.0 Sqmm and earth continuity conductor of size 2 x 4.0 Sqmm to be drawn into PVC conduit conceald wiring.

Supply and fixing Highly robust industrial Box type LED extruded Batten type indoor decorative type luminaire suitable for LED Tube 1 x 16/20 watt (4ft ) complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable including taking down old light fittings complete all as specified and directed. ( Make /Model No :-IGP161LT8-16( ECO-I )of Crompton or equivalent of Bajaj/JaguarPhillips/Magik)

S&F LED Polycarbonate T8 Tube with in built driver with metal heat sink double sided connection of capacity 1x 20 watts all as specified and directed,Make/Model No:-LT8-20-865-(2) ULTRON of Crompton or equivalent of Bajaj/ Phillips/ Jaquar/Magik

Taking down serviceable / unserviceable switch fuse unit/MCB DB with MCB etc for necessary repair/replacement and reuse all as directed by Engineer in Charge.

Supply and fixing of VTPN DB double door,IK 09,IP43-Metal door, 4 way, made of CRCA sheet steel ,RAL 9003,powder coated with bus bar, neutral link, earth bar withprovision for DU125A MCCB,4 pole as incomer and SP/TP MCBs as Outgoings, including taking down old one.( Make/Model- DBVTL004DD of L&T or Equivalent of HPL/LEGRAND.

S&F MCCB 4 pole, 125 Amps, for Incomer of VTPN with fixed thermal & magnetic release of breaking capacity 30kA,DU125H , 415 Volts.(Make: L&T,Cat No.CM90679OOLO or Legrand / HPL)

Supply and fixing of MCB DB double door made of sheet steel phosphates power painted with bus bae neutral link, earth bar and din rail TPN 4 way with 200 Amps rated bus bar 415 Volts all as specified & directed.

Supply and fixing of MCB DB double door, made of sheet steel phosphates, powder painted with bus bar, neutral link, earth bar and din rail SPN 8 way with 200 Amps rated bus bar 230 Volts complete all as specified & directed.

M&L for lamp holder PVC/polycarbonate type with back plate suitable for batten fitting. Make- Anchor/Cona/Roma

S&F in repair LED Lamp 9 watt Energey savers type cool day light for batten holder. (Make/ Model-LED 9W-B22-CDL of Crompton or equivalent of Bajaj/Jaguar/ Century Magik )

S&F MCB 06 to 32 Amps SP 'C' Series,Make/Model :-BB10320C of L&T or Standard / Legrand

S&F MCB 40 Amps SP 'C' Series,Make/Model :-BB10400C of L&T or Standard / Legrand

Supply and fixing MCB 06 to 32 Amps SPN.,'C' Series,Make/Model :-BB20320C of L&T or Standard / Legrand.

Supply and fixing Isolator 100 Amps TPN 415 volt,Make/Model :-BF410000 of L&T or Standard / Legrand

Supply and fixing Air Circulator Fans 230 Volts single phase oscillating 450mm sweep suitable for wall mounting, with taking down old U/S A.C.Fan and depositing at MES Store Yard..Make/Model- Crompton,ACVORTEX18WM (NEW) or Usha/Bajaj/Phillips

Supply and fixing Storage type, electric Water Heater, capacity 50 litres, Copper tank , Single Phase,230 volts,50Hz,BEE 5 Star rating including 02 Nos Hot and Cold inner wiremeshed type PVC water connection pipes with both end copper flare nuts with all fittings and fixtures complete all as specified and directed.Make/Model - Bajaj/Usha/Phillips

Supply and fixing Stop valves,cast copper alloys,screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or unions of 15mm dia and fixed of fancy type,Chromium plated with taking down old one all as specified and directed. (Make- Jaquar/Prayag or equivalent.)

RANA ENTERPRISES

DS ENTERPRISES

jlenterprise

R.B.Construction