Supply, Installation, Testing and Commissioning of Fire Fighting System with wet Riser System for 28 Nos. Govt. Estates Flats

Amount

SITC of over ground M.S Pipes (B class) including cutting holes & chases in bricks or RCC wall/slab & Making good the same. Painting with one coat of primer and two coats of synthetic enamel of approved shade of following sizes:a) 150 mm dia

b) 100 mm dia

c) 80 mm dia

SITC of single headed oblique pattern hydrant Landing valve with 80mm dia flanged inlet and 63mm dia Instantaneous type female outlet complete with cap and all Accessories ISI marked.

Supply of non-percolated flexible hose RRL 63mm dia x 15 mtr long complete with instantaneous type 63mm dia male and female ISI marked coupling and Riverted to hose pipe with riverts and copper wire.& ISI marked

Supply & installation of gunmetal 63mm dia short branch pipe with 20mm dia nozzle.

S/f of First Aid Hose Reel complete with 30 mtr 20 mm hose with shut off nozzle complete as required.

SITC of cast iron double flanged ISI marked Butterfly valve complete with rubber insertion, nuts, bolts, washers etc. of following sizes:a) 150 mm dia

b) 100 mm dia

c) 80 mm dia

SITC of other allied accessories:a) 25mm dia spring loaded air release valve with isolation cork.

b) Pressure Guage.

c) Pressure Switch

d) 25 mm dia ball valve

SITC of cast iron double flanged ISI marked NRV complete with rubber insertion, nuts, bolts, washers etc. of following sizes:a) 150 mm dia

b) 100 mm dia

SITC of gunmetal Fire Brigade connection with collecting head 63mm,4 way instantaneous type male couplings with flanged outlet complete with blank caps nuts, bolts & rubber insertions, conforming IS:904-1983

SITC of gunmetal suction coupling for Fire Brigade drawal of water from fire tank of 100 mm dia.

SITC of the AUTOMISATION CONTROL PANEL consist of a control cubicle of fabricated sheet steel suitable for floor mount and for 3 phase, 4 wire, 50 hz system incorporating suitable isolating main switches, bus bars, relays, contactors, indication lamps, fuses, instruments automatic isolator and auxiliary switch including connectors complete as required for 1 main electric pump, 1 jockey pump and 1 Diesel Pumpetc as required for the system.

Supplying & lying of 3.5 core 10 sqmm Aluminum cable from motor to electrical panel for automation of the system.

Supplying & lying of 3.5 core 50 sqmm Aluminum cable from motor to electrical panel for automation of the system

Supplying & lying of 2 core 2.5 sqmm Aluminum cable from motor to electrical panel for automation of the system.

SITC of Pump set with bronze impeller capacity 1650 LPM with 55mtr head with Kirloskar Diesel Engine 40 HP 12V water cooled with 125 mm suction and 100 mm delivery; with Base frame, coupling, battery fuel tank, AVM pads etc. complete as required. The pump shall be provided with mechanical seal complete as req.

SITC of horizontally centrifugal end suction pump complete for delivery 1650 ltr/ min against a total head of 55mtrs. With 40 HP three phase motor with speed of 2900 rpm with bronze impeller and coupling, base frame and AVM pads complete as required. The pump shall be provided with mechanical seal.

SITC of horizontally mounted centrifugal pump complete for delivery 180 ltr/ min against a total head of 55 mtrs. With 10 HP three phase motor with speed of 2900 rpm with bronze impeller and coupling, base frame and AVM pads complete as required. The pump shall be provided with mechanical seal.

Earthwork excavation in trenches including backfilling and leveling the top after laying of MS pipe.

Supply & installation of weather proof hose cabinets fabricated from 18 swg MS sheet/section with full front glass door and suitable to accommodate 2 nos 15 mtr long hoses and 1 no branch pipes as req.

SITC of Air vessel 250mm dia and 1.5 mtr high with dished top, made of 6mm thick MS pipe complete with provision for 25 NB dia gun metal air release valve, 20mm dia stop valve,25Nb gun metal pressure release valve,25NB drain valve , pressure guage& all accessories as req and painted.

S.I.T.C of Photo smoke detector.

S.I.T.C of Manual call box fabricated from 16 gauge MS sheet with hammer complete as req.

S.I.T.C of electronic hooter with audible range of 25-30mtr with suitable output wattage as req.

SITC of 04 zones solid-state main addressable control panel suitable for wall mounting confirming to IS-2189 fabricated out of 16 guage CRCA sheet incorporating audio visual indication for each zones & 2x12V sealed dry maint. Free battery not less than 07AH capacity & battery charger complete.

S/l of 2 x 1.5 sqmmdia PVC insulated copper conductor armoured cable directly on the surface complete as req.

S/l of 4 x 1.5 sqmmdia PVC insulated copper conductor armoured cable directly on the surface complete as req.

Providing & fixing ABC type fire extinguishers 6 Kg cap. Complete with discharge arrangement, high-pressure hose pipe complete as req.

Providing & fixing CO2 type fire extinguishers 4.5 Kg cap. Complete with wheel valve arrangement, high-pressure wire Braided hose pipe as req. conf. to IS 2878.

Bucket stand with 4 nos 9 ltr Buckets

Earthing with G.I earth plate (600 x 600 6) mm thick including accessories & providing masonry enclosure with M.S cover plate & Watering pipe of 40 mm dia etc. as required with charcoal and Salt including excavation and back filling complete as required.

Providing and laying underground 75mm GI pipe (100m) from tube well to the water storage tank for fire hydrant system.

Fabrication of signage board made out of flex board of dimension 3ft x 5ft for providing information regarding important telephone numbers of nearest fire stations and other allied agencies to be displayed in every block as well as on Main Entrance Gate.

Providing and fixing of fire auto glow signage with printed “IN CASE OF FIRE, USE STAIR UNLESS INSTRUCTED OTHERWISE” in sticker/acrylic sheet from on boards made out of 3mm thick PVC foam board of 1.5cm height letters in red with white back ground for old building block and new building block. The size of the board shall be 25cm x 30cm and shall fixed at a height of 2m from finished floor near manual call points.

Providing and Fixing of fire Notice, Fire Order, Exit Sign, Floor Nos to be displayed at conspicuous places as per requirements of NBC Part IV.

Comprehensive Annual Maintenance for one year Note: 1. CAMC includes checking inspection, maintenance and testing of the system in quarterly basis and changing of the damaged parts if any. 2. The contractor shall be imparting training to the security personals in handling/operational and procedure for all the firefighting systems.

M/S NISHAT FIRE AND SAFETY SYSTEMS (BID ID -2320833)