MISC B/R WORKS AT HQ CWE (U), GE (U) W/S, GE (U)E/S, AGE (I) (U) B/R AND JCO/OR SINGLE LIVING ACCN/MESS OF HQ CEDZ AREA UNDER AGE (I) (U) B/R DELHI CANTT-10

Amount

Repair to existing in built steel/wooden/PVC cup board, locks, hinges incl necessary welding and making the lock/steel, PVC cup boards complete serviceable all as per existing pattern and incl provision of duplicate keys as required as directed by Engineer-in-Charge

Resecuring or easing and adjusting shutters of any description not exceeding 1 sqm each without taking down shutter of any desciption complete all as specified and directed by Engineer-in-Charge.

Taking down shutter of any description exc 1.0 sq.m but n exc 2 sq.m each and after repair the shutter refixing in same opening complete all as specified and directed by Engineer-in-Charge.

Taking down shutter of any description exc 2 sq.m each and after repair the shutter refixing in same opening complete all as specified and directed by Engineer-in-Charge.

Taking down old aluminum door and refixing in same opening after reparing to damaged/loosened rail sections, tightening of scerws,reparing/replacment of locking arragment, repair and replacemnt of glass beading and repairing to existing door closer etc making door in servicealbe condition complete all as specified and directed by Engineer-in-Charge.

S&F in repair hasp & staple 150mm aluminium anodised complete all as specified and directed by Engineer-in-Charge.

S&F in repair 150mm aluminium handles, cast type anodised complete all as specified and directed by Engineer-in-Charge.

S&F in repair 125mm aluminium handles, cast type anodised complete all as specified and directed by Engineer-in-Charge.

S&F in repair 200mm aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed by Engineer-in-Charge.

S&F in repair 150 mm aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed by Engineer-in-Charge.

S&F in repair 300mm aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy fixed complete all as specified and directed by Engineer-in-Charge.

S&F of 3 mm thick , sheet glass ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 sqm in each pane including hacking out glass old broken (any thickness), quailty or description from wooden/steel frames, stone brick, concrete surrounding, glazed with oil putty or fixed with beads etc. complete all as specified and directed by Engineer-in-Charge.

S&F in repair for 4.8mm thick sheet glass/frosted ordinary quality in square exc 0.50 sqm in each pane including hacking out glass old broken (any thickness), quality or description from wooden/steel/aluminium frame, stone brick, concrete surrounding, glazed with oil putty or fixed with beads etc complete all as specified and directed by Engineer-in-Charge.

S&F as in repair floor door stopper 140mm of aluminium alloy body and tongue anodised, with hard drawn steel spring fixed and complete all as specified and directed by Engineer-in-Charge.

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed by Engineer-in-Charge.

Taking down chowkats exc 1.5sqm and n.exc 4 sqm each with shutters (without taking off shutters from the chowkats or frames)

---ditto--- same as above item No-16 but n.exc 1.5 sqm

Taking down shutters exe 1sqm and n exe 2 sqm each.

S&F of 2nd class HW plain, solid, straight chowkats and frames,wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed by Engineer-in-Charge.

S&F of 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type of both side complete all as specified and directed by Engineer-in-Charge.

M&L for 35mm thick 2nd Class Hard Wood as glazed and skelton shutters open rebated and prepared to receive glass, gauze etc, edges of forming plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters with sash bars all as specified in SSR Pt-I and directed by Engineer-in-Charge.

M&L for solid PVC moulded door shutter 28 to 30 mm thick with wood free EPS (Stiles) with 2,4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the both face, supplying and fixing in frame at site as per specification and aporved by AGE(I) etc complete all as specified and directed by Engineer-in-Charge.

S&F of solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube fixing in existing opening including single side prelam PVC Sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet necessary hold fast and concerte complete all as specified and directed by Engineer-in-Charge.

S&F of hold fasts and similar small articles conforming to Fe 410-0or 310-3.

S&F of 4mm thick glass sheet ordinary quality plain/frosted on one side, n exc 0.5Sqm in each pane,fixed to Aluminium windows complete all as specified and directed by Engineer-in-Charge.

S&F in 100mm long butt hinges medium weight stainless steel with ISI mark.

S&F of Aluminum alloy anodized Aldrop bolt 300mm long with hasp and staple and fixing bolts.

S&F of Aluminum anodized barrel tower bolt of extruded section 200mm long complete all as specified and directed by Engineer-in-Charge.

S&F in extruded aluminium alloy handles 150mm long fabricted type, anodised complete all as specified and directed by Engineer-in-Charge.

S&F of aluminium alloy wire cloth, 0.45 nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staple complete all as specified and directed by Engineer-in-Charge.

S&F of steel window with side hung shutters including projecting type hinges, steel handle and steel pegstay, complete with glazing baar, dovetailed or welded.

---Ditto--- item No 31 above but without glazing bar

M&L for 18mm thick Marine plywood, shutter grade BWP, type BB with both side 0.9mm thk decorative choice laminate type 1 of surface finish, colour and pattern as approved i, fixed with approved adhesive as per manufacturer's instruction,fixed with screws to timber frame work including 1st class HW lipping alround the shutter/edges and polishing etc complete all as specified and directed by Engineer-in-Charge.

S&F of continuous (piano) hinges, mild steel, bright finish or electrogalvanised fixed in repair.

Dismantling boarding any description fixed in any position with screws complete all as specified and directed by Engineer-in-Charge.

M&L for two coat of synthetic enamel paint( finishng coat) over one coat of pink primer to new wood surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified and as directed by Engineer-in-Charge.

S&F of anodised aluminium powder coated window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws aluminum poder coated tower bolt 02 Nos/ Each shutter etc. complete all as specified (Note: Colour coating shall be approved by Engineer-in-Charge)

Dismantling floor, hearth or wall tiling (fixed at any portion but not backing) including cement mortar bedding and removing and removing rubbish off the premises (outside MD land) complete all as specified and directed by Engineer-in-Charge.

M&L for coloured glazed ceramic wall tiles 450x300x7mm thick as in vertical surface set and jointed in neat cement slurry & pointed in coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge.

M&L for non skid cereamic coloured tiles 7 to 8mm thick (square/ rectangle) area of each tiles exceeding 0.11 sqm but n. exc.0.18sqm, in floor etc set and joined in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.

M&L for light shade Vitrified ceramic coloured tiles 10mm thick(Square / rectangular ) polished area of each tile not exc 0.36 sqm in floors etc. set & jointed in neat cement slurry and pointed in white cement to match over 15mm thick screed bed in cement mortar (1:6), complete all as specified and directed by Engineer-in-Charge.

M&L for light shade Vitrified ceramic coloured tiles 10mm thick(Square / rectangular ) polished area of each tile not exc 0.36 sqm in skirting or dado etc. set & jointed in neat cement slurry and pointed in white cement to match over 10mm thick rendering in cement mortar (1:4), complete all as specified and directed by Engineer-in-Charge.

Dismantled of brick masonry work built in Cement mortar or cement lime mortar complete all as specified and directed by Engr-in-Charge.

M&L for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of Pre-painted galvalume aluminum zinc coated GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with screw including dismantaling old sheeting complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of Pre-painted galvalume aluminum zinc coated GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with screw including dismantaling old sheeting complete all as specified and directed by Engineer-in-Charge.

S&F in repairs, Aluminium (extructed section) body door Closer hydraulically regulated, designation No 3, universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 Kg complete all as specified and directed by Engineer-in-Charge.

S&F in repair aluminium mortice lock 2 or 4 levers vertical type of size 100mm complete all as specified and directed by Engineer-in-Charge.

Dismantling old Non gear/gear operated MS/Steel rolling shutter/MS Shutter of any size any position complete all as specified and directed by Engr-in-Chrage.

S&F for 1.25mm steel rolling shutters, with gear opreated type with bevel gear box and crank handle without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated complete push or manual type complete all as specified and directed by Engineer-in-Charge.

M&L for PCC (1:2:4) type B-1 (20mm graded aggregate) as in kerbs/coping and the like including weathering, slightly rounded or chamfered angles and throating, including formwork complete all as specified and directed by Engineer-in-Charge.

Dismantaling stone slabs or tiles of any description or thickness in floor complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness ( below or above ground level) and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas complete all as specified and directed by Engineer-in-Charge.

M&L for 75mm thick cement concrete type D-2 1:4:8 ( 40mm graded aggregate) as in sub base for interlocking complete all as specified and directed by Engineer-in-Charge.

M&L for machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 Grade fixed with grey cement and no pigment including 30mm thick sand filling under floors, watering and consolidation complete all as specified and directed by Engr-in-Charge.

----ditto----as per item No.55 above but except tile.

M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick,set, jointed and pointed in neat cement slurry in floors laid over 15mm thick screed in CM 1:6, including dismantlig complete all as specified and directed by Engineer-in-Charge.

Dismantaling kerb stone for any descripition and any size complete all as specified and directed by Engineer-in-Charge.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortat 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage open whereever required complete all as specified and directed by Engineer-in-Charge.

S&F in repair framed work such as grills,gratings, Mild steel in flat, round or square bars etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; rallings; framework of watertanks and similar work conforming to Fe 290 Gde-E-165.for Servant balcony portion and including existing wooden frame with wire mesh etc complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster, any description from brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 10 mm thick on brick or concrete surfaces in cement mortar 1:6, finished even & smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of newly untreated plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer with alkali resistant priming paint complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work on concrete surfaces finished even and smooth without using extra cement including water proofing compound complete all as specified and directed by Engineer-in-Charge.

M&L for applying two coats of weather proof exterior emulsion paint over priming coat of exterior primer on new or untreated plastered surfaces using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 5 mm thick in cement mortar (1:3) on ceilling finish even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of newly plastered surfaces on ceiling and applying three coats white wash complete all as specified and directed by Engineer-in-Charge.

SAGAR ENTERPRISES (BID ID -3439320)

LAIQ RAM VERMA (BID ID -3446116)

STAR CONSTRUCTION CO (BID ID -3440562)

B. S BUILDERS (BID ID -3439948)