Re-organization of 440 V OH line from Raja Bunglow sub station to Kasturba Vidyalaya including replacement of damaged poles and conductors and cradling arrangement at G.M colony under G M Unit Dhori Area.

Amount

Erection of steel tublor pole of length exceeding 10 mtrs but not exceeding 12 mtr in cement concrete 1:3:6 ( 1 cement :3 coarse sand :6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc as required ( pole supply by department )

Erection of All aluminium conductor 7/1.96mm to 7/3.10 mm diameter including binding etc as required 320 mtr x 5 wire = 1600 mtr = 1.6 km x 394 kg/km = 630.40 kg

Supply and erection of Stay set complete ( galvanised ) with 19/20 mm dia x 1.8 mtr long stay rod, anchor plate of size 45 cm x 7.5mm, thimble, stay clamps, turn buckle ( 20mm x 60 cm ) 7/3.15 mm dia GI stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement :3 coarse sand :6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc as required.

Supply and erection of 100 mm x 80 mm volt pin insulator complete with GI spindle and nuts etc as required.

Supply and erection of galvanised D iron clamps complete with shackle insulators 75 mm x 90 mm, GI bolts, nuts and washers, coach screw etc as required

Supply of 8 SWG GI wire for cradling & Earthing. 380 lacing x 5.5 mtr = 2090 mtr x 0.131 kg/mtr = 273.79 kg

Supply of channel 75 mm x 40 mm x 6 mm (7.14 kg / mtr) cross arm for 4 wire OH Line complete with clamps bolts and nuts etc including drilling of holes of insulators pins and painting with primer and finish paint as required.

Supply of channel 75 mm x 40 mm x 6 mm (7.14 kg / mtr) cross arm for 2 wire OH Line complete with clamps bolts and nuts etc including drilling of holes of insulators pins and painting with primer and finish paint as required.

Erection of angle channel iron cross arm on RCC/PCC steel tubular / pole etc.

Dismantling of conductor (6 span X 40 mtr X 8 wire = 1920 mtr = 1.92 km x 394 kg/km = 756.48 kg)

Dismantling of pole embedded in cement concrete foundation etc.

Transportation of pole (old and new)

Erection of cradle guard

Providing and making of steel pole collar in cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 stone aggregate 20 mm ) of specified size and shape including form work, plastering if required, curing etc. 0.65 cum x 11 nos = 7.15 cum

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared.

Applying priming coat with primer of approved brand and manufacture having low VOC (Volatile organic Compound ) content. with ready mixed red oxide zinc chromatic on steel/ iron works having VOC content less than 250 grams/ litre.

Painting of pole with cross arm from aluminium paint of approved brand and manufacturer to give as even shade.

Laying of one no PVC insulated and PVC Sheathed/XLPE power cable of 1.1 KV grade upto 35 sq mm cable direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

Supply of two length of channel iron 75 mm x 40 mm x 7.14 kg per mtr. bracket cross arm for double pole cross arm for three wire 11 kv OH line conductor complete with through bolt and nuts for clamping to the poles 50 mm x 6 mm flat iron clamps welded on one side to the channel iron and with bolts and nuts on other side for tying the cross arm together including drilling holes for insulators pins bolt and nut etc and painting with primer and finish paint as required.

Erection of Double Pole cross arm for over head lines as required.

Earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/coke and salt as required.

Providing and fixing following rating and breaking capacity and pole MCCB in existing cubical panel board including drilling holes in cubical panel, making connections, etc. 360Amp, 50KA, FPMCCB.

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring / cable as required.

Dismantling of service connection for re – organization of OH line and re-fixing the same after re–organization of OH line

Connection of cable leads in switchgears etc as required

Dismantling of street light fitting from old poles and refixing on new pole

Aluminum lugs for 300 sq mm cable.

Supply and providing of MS clamps with bolt and nut for street light

Total impact of GST for the purpose of CTC

M/S KUMAR ENTERPRISES

M/S SHIV PARBATI ENTERPRISES