Loading
Loading…
Loading…
Tender Value
₹31.8 L
EMD Value
₹63,500
Closing Date
30 Mar 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
GENERAL
12 conditions · 1 needing a document upload
Special Eligibility Criteria:- Tenderers should possess a valid electrical contractor license at the time of opening of tender, issued by any state government & same should be submitted along with tender documents by all bidders including working contractors of this unit otherwise offer shall be SUMMARILY REJECTED
I/we the tenderer (s) am/are signing this document after carefully reading the contents.
I/We the tenderer(s) also accept all the conditions of the tender and have signed all the pages in confirmation thereof.
I/we hereby declare that I/we have downloaded the tender documents from Indian Railway website www.ireps.gov.in . I/we have verified the content of the document from the website and there is no addition, no deletion or no alteration to the content of the tender document. In case of any discrepancy noticed at any stage i.e. evaluation of tenders, execution of work or final payment of the contract, the master copy available with the railway Administration shall be final and binding upon me/us.
I/we declare and certify that I/we have not made any misleading or false representation in the forms, statements and attachments in proof of the qualification requirements.
I/We also understand that my/our offer will be evaluated based on the documents/credentials submitted along with the offer and same shall be binding upon me/us.
I/We declare that the information and documents submitted along with the tender by me/us are correct and I/we are fully responsible for the correctness of the information and documents, submitted by us.
I/we certify that I/we the tenderer(s) is/are not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of submission of bids, either in individual capacity or as a HUF/ member of the partnership firm/LLP/JV/Society/Trust.
I/we understand that if the contents of the certificate submitted by us are found to be forged/false at any time during process for evaluation of tenders, it shall lead to forfeiture of the Bid Security and may also lead to any other action provided in the contract including banning of business for a period of upto two year. Further, I/we and all my/our constituents understand that my/our offer shall be summarily rejected.
I/we also understand that if the contents of the certificate submitted by us are found to be false/forged at any time after the award of the contract, it will lead to termination of the contract, along with forfeiture of Bid Security/Security Deposit and Performance guarantee and may also lead to any other action provided in the contract including banning of business for a period of upto two year.
I/We have read the clause regarding restriction on procurement from a bidder of a country which shares a land border with India and certify that I am/We are not from such a country or, if from such a country, have been registered with the competent Authority. I/We hereby certify that I/we fulfil all the requirements in this regard and am/are eligible to be considered (evidence of valid registration by the competent authority is enclosed)
28 conditions · 4 needing a document upload
Tenderer Shall submit COVER LETTER (TENDER FORM-1) as per Section 4.2 of PART-I of Tender Document duly filled. The Cover Letter must be submitted by the Tenderer on its letter head. Please refer Section 4.2 COVER LETTER , TENDER FORM-1 of PART-I of Tender Document.
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be.Tenderer shall submit the documents as mentioned in Clause 3.7 of of PART-I of Tender Document. The tenderer whether sole proprietor / a company or a partnership firm / joint venture (JV) / registered society / registered trust / HUF/ LLP etc. if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association /Board resolution, failing which tender shall be summarily rejected . Format of POA is given in TENDER FORM-3 of PART-I of Tender Document. A separate power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, shall be submitted after award of work, specifically authorizing him/them to deal with all other contractual activities subsequent to signing of agreement, if required. Note: A Power of Attorney executed and issued overseas, the document will also have to be legalized by the Indian Embassy and notarized in the jurisdiction where the Power of Attorney is being issued. However, the Power of Attorney provided by Bidders from countries that have signed the Hague Legislation Convention 1961 are not required to be legalized by the Indian Embassy if it carries a conforming Appostille certificate. The tenderer shall submit all the relevant documents mandatorily as mentioned in Clause 3.7 of PART-I of Tender Document.
Necessary information about Employment/Partnership etc. of Retired Railway Employee as per details mentioned in Clause 3.12 of PART-I of Tender Document should be given by tenderer . If no Retired Railway Employee is employed by tenderer then the tenderer shall submit an Undertaking as in Annexure-XXVI of PART-V of Tender Document that no railway employee is employed. Note:- If information as required as per above clause has not been furnished, contract is liable to be dealt in accordance with provision of clause 62 of PART-II of GCC-2022.
Tenderer should submit documents related to registration Details, PAN, GSTIN, Registered Address, Bank Details etc.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The tenderer shall submit along with the tender document, documents in support of his/their claim to fulfill the eligibility criteria as mentioned in the tender document. Each page of the copy of documents/certificates in support of credentials, submitted by the tenderer, shall be self-attested/digitally signed by the tenderer or authorized representative of the tendering firm. Self attestation shall include signature, stamp and date (on each page). Only those documents which are declared explicitly by the tenderer as "documents supporting the claim of qualifying the laid down eligibility criteria", will be considered for evaluating his/their tender.
The Railway reserves the right to verify all statements, information and documents submitted by the bidder in his tender offer, and the bidder shall, when so required by the Railway, make available all such information, evidence and documents as may be necessary for such verification. Any such verification or lack of such verification, by the railway shall not relieve the bidder of its obligations or liabilities hereunder nor will it affect any rights of the railway there under.
In case of any wrong information submitted by tenderer, the contract shall be terminated, Bid security, Performance Guarantee (PG) and Security Deposit (SD) of contract forfeited and agency barred for doing business on entire Indian Railways for 5 (five) years.
The GST Act 2017 will be applicable as per extant policy as notified by Central/State Govt. and as amended from time to time. All the bidders/tenderers should ensure that they are GST compliant and their quoted rates are inclusive of taxes and GST @ 18%.
No Post Tender correspondence for submission of additional documents shall be entertained after opening of the Technical & Commercial offers. Even suo-moto post tender letters of the tenderers shall be treated as NULL & VOID. (Authority HQ Letter No. 74-W/O/Pt.XXV/WA/Loose dated 07.04.15).
The contract will be governed by Indian Railways Standard General Conditions of Contract updated with correction slips issued up to date of inviting tender or as otherwise specified in the tender documents.
Conditional offer and Alternative proposal by Tenderer: Tenderers shall submit offers that fully comply with the requirements of the Tender documents including the conditions of contract, design and specification requirements if any. Conditional offer or alternative offers will not be considered in tender evaluation and will be summarily rejected. The Tenderer shall have no claims in this regard whatsoever. "Any unconditional rebate offered by the tenderer should be mentioned on of 'Schedule of Quantities' specifically. To attract the rebate mentioned each page of schedule may refer the note for the conditional rebate mentioned in the end. Any rebate mentioned at any other place in tender document shall not be considered. The unconditional rebate mentioned in "Scheduled of Quantities" shall be considered while evaluation of bid." mentioned in the end. Any rebate mentioned at any other place in tender document shall not be considered. The unconditional rebate mentioned in "Scheduled of Quantities" shall be considered while evaluation of bid."
Electrical work for Balamau-Upgradation of Running Room BLM.
06_SrDEE_G_MB_2026
06_SrDEE_G_MB_2026
Open
Works - General
6 Months
Moradabad, Uttar Pradesh
₹0
₹63,500
30 Mar 2026
6 Mar 2026
16 Mar 2026
67 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 31,75,825.89 | ||
| — | — | — | Above/ 94515.00 Below/P | ||
| "Supply and recessing/fixing of PVC conduit pipe with accessories, junction box etc. including making chase, and plastering/clamping etc.as per technical specifications. PVC conduit pipe conforming to IS: 9537 Part-III. 1987 (Latest version) Size:25 mm dia (Medium). Note:- On ceiling/locations where provision of recess conduit is not possible then conduit will be provided on surface as per site condition and as per instruction by Rly. Representative. " | — | 1500.00 | — | — | |
| — | — | — | Above/ 343014.00 Below/P | ||
| Supply of FRLSH, PVC insulated multi stranded copper conductor single core cable conforming to IS:694(latest version), and drawing in laid (recessed/surface) MS/PVC conduit pipe for wiring of point wiring/circuit wiring/sub main/Main as required as per technical specification including connections, testing and commissioning of following sizes: | for details. | Breakup | — | — | |
| — | — | — | Above/ 2576.80 Below/P | ||
| Supply, fixing, testing commissioning of MS switch boxes of the following size made out of 16 SWG MS sheet duly painted / coated with red oxide primer with egg white hylem sheet 3 mm. thick as per tech. specification, ISS / IE Rules and site requirement. Hylem sheet shall be larger than MS Boxes of following sizes:- ( NOTE :- The MS Boxes shall be with earthing bolts and hylem sheet shall be fixed with 04 Nos. brass machine screws and washers etc.) | for details. | Breakup | — | — | |
| — | — | — | Above/ 2981.84 Below/P | ||
| Supply of Piano type switch as per IS:3854-2023 (latest version)/Bell push as per IS:4794(Part-2)-1986(latest version)/Flush type socket outlet as per IS:1293-1988(latest version) & installation on the recessed switch box including cutting of phenolic laminated sheet, connection, testing & commissioning as per technical specifications. | for details. | Breakup | — | — | |
| — | — | — | Above/ 1827.00 Below/P | ||
| Supply of Batten/Angle Holder/Ceiling rose & installation with 3mm thick white Phenolic laminated sheet on the Junction Box/ Fan Box etc of laid conduit including connections, Testing & commissioning as per relevant IS and Tech. Specification and as per site requirement. | — | 100.00 | — | — | |
| — | — | — | Above/ 42238.40 Below/P | ||
| Supply & fixing of complete 18-20 watt LED, tube light fitting 1200 mm Integrated with Aluminium Extrusion Base with LED & Driver, decorative pin type end caps & copper contacts with Diffuser made of transparent polycarbonate with tube light, operating voltage single phase 230 volt AC, 50 Hz conforming to CEE/NR specification No. -CEE/NR/121-Elect./PS/2018(Rev. 3) ,dated. 28.06.2018 and PCEE/NR/121-Elect/PS/2019 (Rev-4), dated 04.11.2019 or Latest. | — | 80.00 | — | — | |
| — | — | — | Above/ 111022.32 Below/P | ||
| Supply, fixing, testing & commissioning of LED light luminaries 595 X 595 mm size, Tile type, having system wattage 36-45 Watt , CRCA body powder coated , high efficiency milky white PMMA diffuser with no bright spot visible, complete with all mounting arrangement accessories conforming to CEE/NR specification no. CEE/NR/121-Elect/PS/2018 (REV-3), dt. 28.06.2018 & PCEE/NR/121-Elect/PS/2019 (REV.-'4'), dt:04.11.2019 (Attached) or latest. | — | 24.00 | — | — | |
| — | — | — | Above/ 62266.08 Below/P | ||
| Supply, erection, fixing, testing & commissioning of BLDC Ceiling Fan of sweep 1200 mm, Air delivery range from 210 cubic metre per minute to 220 cubic metre per minute and input power consumption range from 26W to 35W ( Star Rating - 5 Star, Service Value - 6 & above cubic metre per minute per watt ) with remote for speed control of fan suitable for operation on 1 Ph, 50Hz, 240V power supply system (conform to all the performance requirements laid down in IS 374:2019 including all amendments, as applicable ) | — | 24.00 | — | — | |
| — | — | — | Above/ 18922.50 Below/P | ||
| Supply, erection, fixing, testing & commissioning of Fresh air Fan size 12'' 220 V.AC.,50 Hz, ISI marked, to be approved by SrDEE/G/MB complete in all respect as per tech. specification / site requirement. | — | 10.00 | — | — | |
| — | — | — | Above/ 12962.30 Below/P | ||
| Supply, fixing, testing & commissioning of Main TPN Distribution Board Double Door 4 way complete with 01 No. MCCB 63/100 Amps.( 4 pole, 35 KA ) and 12 Nos. SP MCB 6-32 Amps. of 10 KA complete in all respect & as per IS technical specification & site requirement. | — | 1.00 | — | — | |
| — | — | — | Above/ 17397.96 Below/P | ||
| Design & Manufacture, Supply, Installation, fixing, testing & commissioning of 8 way MCB Distribution Board , dust & vermin proof, 3 phase, 4 wire 415 volt, AC supply system. The switch board shall be complete with inter connections, instrument connections with copper conductor cable as per IS 13032, Phosphatised & Painted with epoxy polyester based powder paints. Three phase Double Door Sheet steel Enclosure detachable gland plates, flush/surface mounting for MCB's fitted with Bus bars, Earth bars & Neutral links etc.of suitable capacity, comprising of following ie .Double door 8 way Distribution Board 1 No, 1x 40 A.MCB DP 10 KA, 240/415 V., 50 Hz.& 6x16-32 A.MCB SP 10 KA, 240/415 V., 50 Hz (IP55) complete in all respect as per site requirement/IE Rule & tech. specification. | — | 4.00 | — | — | |
| — | — | — | Above/ 27554.94 Below/P | ||
| Earthing with 40mm dia. GI pipe class 'B' , 3 meter long, earth electrode as per IS:3043 (latest version) to achieve earth resistances less than 5 ohms including construction of masonry enclosures with hinged cover plate of cast iron/RCC(Heavy Duty with lifting arrangement) with locking arrangement as required (Outer hole size: 450XmmX450mm and Cover plate(CI/RCC) size:300mmX300mm) on top, provision of earth plate, connections from earth electrode to switch gear/pole as per technical Specification/I.E. Rule. | — | 9.00 | — | — | |
| — | — | — | Above/ 16027.52 Below/P | ||
| Design, Fabrication, Supply, Fixing and commissioning of double door IP 65 Feeder Pillar ( Size- 0.4 m.x0.4 m.x0.5 m.) made of Angle Iron size - 40x40x6 mm.covered from all sides with MS Sheet 20 SWG including door with hinge, locking arrangement, nut & bolts, Aluminum Bus Bar ( Size-35x5x400 mm.), Bakelite Gutka, cable glands, Earthing points, Cement, sand, interconnections etc. and grouting with sand & cement and painting with two coats of enamel grey paint over a coat of red oxide primer for antirust complete in all respect & as per site requirement. | — | 4.00 | — | — | |
| — | — | — | Above/ 220746.00 Below/P | ||
| Supply, installation, testing & commissioning of complete 60 watt LED Street light fitting, operating voltage single phase 230 volt AC, 50 Hz with suitable Pressure Die Cast Aluminium Housing and LED Driver conforming to CEE/NR specification no. CEE/NR/121-Elect/PS/2018 (REV-3), dt. 28.06.2018 & PCEE/NR/121-Elect/PS/2019 (REV.-'4'), dt:04.11.2019 (Attached) or latest. | — | 50.00 | — | — | |
| — | — | — | Above/ 246540.40 Below/P | ||
| Supply and fixing of 5 meter long Hot dip galvanized octagonal pole with foundation, base plate, fixing of 01/02 nos. arm 1000 mm. for the fittings including smart pack junction box with 06 Amps. MCB DP (10 KA) and terminals as per technical specification & complete in all respect/as per site requirement. | — | 20.00 | — | — | |
| — | — | — | Above/ 665676.00 Below/P | ||
| Laying, underground/road/Railway track, recessing in platform/ wall along with Rly. Track/in laid RCC/GI pipe as required 1.1KV grade LT XLPE insulated armored, aluminum conductor cable including making chase & plastering after laying of cable/digging of cable trench, sand cushioning, protective covering with second class bricks width wise, provision of cable route marker as per Tech. Specification including end terminations with aluminum clamping socket/lugs lugs testing & commissioningand shall be in conformity to IS 1255 /1983 (Latest Version). Excavation shall be done complying with code of safety as per IS 3764/1992. Cable route plan should be submitted by firm for approval of C.A. before execution. Cable route marker should be attached with the laid cable through 'J' hook and display board should be above the ground.) Note: Cable will be supplied by Railway. | for details. | Breakup | — | — | |
| — | — | — | Above/ 549450.00 Below/P | ||
| "Provision, supply and laying by Horizontal Boring Trench less method 2.5 meter deep as per relevant IS suitable for laying HDPE Pipe of 140 mm inner dia and 160 mm outer dia. & shall be in conformity to IS 1255 /1983 (Latest Version). Excavation shall be done complying with code of safety as per IS 3764/1992 and as per site requirement. (Supply of HDPE pipe as per IS:4984-1995 (latest version) included)." | — | 600.00 | — | — | |
| — | — | — | Above/ 99750.00 Below/P | ||
| "Supply, fixing, testing & commissioning of GI Cable Tray Steel - Pre Galvanised, Non- Flame propagating system component, conforming to IEC:61537:2006 or latest (Length 3000 mm, Width 200mm,Cable tray system height 35mm and Wall thickness 2mm) complete in all respect asper technical specification & site requirement." | — | 120.00 | — | — | |
| — | — | — | Above/ 168155.04 Below/P | ||
| Design & manufacture LT switch board as per IS 8623(Latest version), Supply, Installation, fixing, testing & commissioning of cubicle , floor /wall mounted type, dust & vermin proof LT Switch Board, 3 phase, 4 wire 415 volt, AC supply system. The LT Switch Board shall be powder coated. The incoming feeder shall be provided with three phase KW meter ( Range 0 to 100 KW). The switch board shall be complete with inter connections, instrument connections with copper conductor cable, 400 Amps. Copper bus bar & front operated switchgears, Digital Voltmeter(0 to 500 Volts), Digital Ampere meter (0- 200 Amps) with Selector switch I/C with Indication lights ( lamp set.) earthing studs etc. comprising of following i.e. I/C -MCCB 400 Amps(36 KA) 4 Pole-1 No. (DN 3 type), O/G- 125 Amps MCCB(36 KA) 4 Pole-05 Nos. (DN 2 type) with 200 Amp COS , complete in all respect. The work also includes masonry work along with formation of platform for erection of new panel. The Incoming / Outgoing cable in new panel to be terminated with suitable size cable gland and terminating lugs as per site requirement. | — | 1.00 | — | — | |
| — | — | — | Above/ 53522.00 Below/P | ||
| "SITC of sign panel side-single side illuminated ,""1 mm aluminium sheet with laser cut graphics ,painted to required colour , fixed to aluminium extrusion type SOLIS SB-01 made out of aluminium alloy 6063.0(HE9WP) as per IS63400 or latest with max tensile strenght 130 MPa and BHN of 25 made from virgin aluminium using Hot casting technique to produce close grained and oxide free product,JINDAL,HINDALCO,BALCO or similar ,pasted to structure using Acrylic VHB tape - 3M ,4941 or Avery Dennision AFB 8680 or similar.Letter fascia to be laser cut out from opel perplex sheet of 4 mm thickness with LT % value of 70 ,certified as such by an accredited Lab,fixed in graphite space from inside make - LUCITE,MITSUBISHI,PERPEX,ARKEMA or similar. Illumination provided by LED modules fron inside 6500K certified by accredited Lab ,Beam characteristics : 155 c colour consistency (Mac Ad au 5) integrated current source to stablize luminous flux .Ambient temp.25c to 50c . Max surface temp. 65c protection rating IP 68. Luminous flux per module 70 lm. CRI>80. Lum efficiency 97 lm/w voltage = 072 w/ 60 mA per module .En 62031 ,LED to be NICHEA/Samsung or similar ,DC current with LUM maintenance of 89.7% over hours with supporting certificate. To use as per sign Size :- 20 w, 40 w, 60 w, 100 w, 150 w, constant current mode power supply , Universal AC input/Full range ,Fully encapsulated with IP 67 range, Withstand 300 V AC surge input for 5 seconds ,100 % full load burn in test , 5 years guarantee ,Class C as per EN61000- 3-2 ,suitable for central battery system ,Auto shut and restart in case of overload, Auto power modulation & restart outside range bound temperature ,Hiccup mode and auto recovery in case of short circuit on secondary side (LED) make TALEX,MEANWELL,ST MICRO electronics PHILIPS or similar.Sizes as per site requirement." | — | 20.00 | — | — | |
| — | — | — | Above/ 18663.80 Below/P | ||
| Supply, erection, fixing, testing & commissioning of Modular AC box with 32 Amps plug socket and 32 Amps. DP MCB (10 KA) complete in all respect & as per site requirement. | — | 10.00 | — | — | |
| — | — | — | Above/ 25278.10 Below/P | ||
| Supply, installation, testing & Commissioning of light weight wall mounted type Voltage Stabilizer confirming to IS : 8448 suitable with toroidal care transformer having capacity 4 KVA, input voltage 135 - 290 Volt and output voltage 220 - 240 Volt, MCB 32 Amps, time delay relay ( 2 - 4 min ) with soft touch type instant and start switch, under voltage and over voltage cut off with indicators. Digital Voltmeter and Ammeter with soft type selector switch for measuring input & output voltage, indicator for power ON and timer ON. | — | 10.00 | — | — | |
| — | — | — | Above/ 18900.90 Below/P | ||
| Installation, fixing, testing and commissioning of 1 to 2 ton capacity Split type AC including suction / discharge copper tubing charges & ducting arrangement for waste water discharge complete in all respect & as per site requirement. (Air conditioners will be supplied by Railways). | — | 10.00 | — | — | |
| — | — | — | Above/ 23398.72 Below/P | ||
| Supply,Fixing, testing & commissioning of LED based Reading light/Bed lights, system wattage 1 W, cool white with compatible inbuilt LED driver. | — | 16.00 | — | — | |
| — | — | — | Above/ 41722.02 Below/P | ||
| Supply, erection, testing & commissioning of ISI marked Stationary storage Vertical vented type electric water heater conforming to IS: 2082/1993 with latest amendments , material of inner container copper Capacity 25 Ltrs., 1500 watt, pressure 60N/SQM, Class-I complete with element, thermostat etc and suitable for operation on 240 volts single phase AC50 Hz supply BEE 5 Star rating complete in all respect as per site requirement. | — | 6.00 | — | — | |
| — | — | — | Above/ 52856.07 Below/P | ||
| Supply,installation,testing & commissioning of Storage water cooler 150 litres,ISI marked with IS 1475(latest),Non-CFC refrigerant. | — | 1.00 | — | — | |
| — | — | — | Above/ 77550.00 Below/P | ||
| "Supply, installation, testing & commissioning of Solar water Heater system direct tube type, 500 LPD capacity consisting of suitable no. of tubes with mounting structure ,cold water tank of 500 Ltr. capacity with float valve & stand and 45 mtr. plumbing system including CPVC pipe and valves and hot water taps on suitable places . ( Warranty Period : 5 Years)""" | — | 1.00 | — | — | |
| — | — | — | Above/ 48000.00 Below/P | ||
| Supply, erection, testing & commissioning of Synthetic Honeycomb pads Steel Body Evaporative Coolers-Desert Cooler. | — | 6.00 | — | — | |
| — | — | — | Above/ 24715.70 Below/P | ||
| Supply, Installation, Testing and Commissioning of 10 watt LED Garden Light (SMD LED Chip) operating voltage single phase 230 volt AC, 50 Hz conforming to CEE/NR specification no. CEE/NR/121Elect/PS/2018(REV-3), dt. 28.06.2018 & PCEE/NR/121-Elect/PS/2019 (REV.-'4'), dt:04.11.2019 (Attached) or latest including protection of the entire housing as per IS:10322(Part 1):1982 latest-IP66, Luminaires casing/housing shall beTop Spun Aluminium /Die cast Aluminium and Bottom Die CastAluminium with higherthermal conductivity, Mounting Fixture size- 150mmx100mmx600mm, Suitable connector shall be provided for LEDconnection between driver output and LED, extruded silicon loop gasket shall be provided in the lantern body to ensure a weather proof seal between the UV Glass cover and the metal housing to exclude the entry of the dust, water, insects etc., corrosion resistant powder coated, Thickness and Ik rating Diffuser-3mm, IK-08, Mounting Pipe size-70 mm, Length of ISI marked three core wire shall be provided along with supply of material50 cm complete in all respect and as per site requirement. | — | 10.00 | — | — | |
| — | — | — | Above/ 17421.60 Below/P | ||
| Supply, fixing, testing and commissioning of LED down lighter, housing aluminum die cast, white powder coated and PMMA diffuser having system wattage less than or equal to 15 Watt complete with all mounting arrangement, complete with accessories conforming to CEE/NR's spec. No. CEE/NR/121-Elect/PS/2018 (Rev- '3') or latest & PCEE/NR's spec. No. PCEE/NR/121-Elect/PS/2019 (Rev- '4') or latest. | — | 24.00 | — | — | |
| — | — | — | Above/ 3201.84 Below/P | ||
| Supply, Installation, testing & commissioning of Conealed MS box size 4 Inch for Downlighter as per site rquirement. | — | 24.00 | — | — | |
| — | — | — | Above/ 47500.00 Below/P | ||
| "Supply and recessing/fixing of PVC conduit pipe with accessories, junction box etc.as per technical specifications.PVC conduit pipe conforming to IS:9597 Part-III.1987 (Latest version)Size:25mm dia (Heavy) for roof. Note:- On ceiling/locations where provision of recess conduit is not possible then conduit will be provided on surface as per site condition and as per instruction by Rly. Representative. " | — | 500.00 | — | — | |
| — | — | — | Above/ 19471.04 Below/P | ||
| Supply,Installation,Testing & Commissioning of RCCB 2P 25A 30mA with metal enclosure. RCCB and metal enclosure should be of same make of reputed manufacturer and as per specification. | — | 8.00 | — | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Tenderdocument-06-20261.pdf
ATTACHMENT
LEDRev.3spec.clear_compressed.pdf LED Specification
ATTACHMENT
PCEE LED SPEC
ATTACHMENT
ACSGCCmerged.pdf
ATTACHMENT
JPODigging.pdf
ATTACHMENT
I.R.GCC_April-2022.pdf
ATTACHMENT
Annexure-U.pdf
ATTACHMENT
letterofcredit.pdf
ATTACHMENT
LEDRev.3spec.clear_compressed.pdf
ATTACHMENT
CorrectionLetterforpitlight-121-Rev-4.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .