REPAIRS TO FLOORING WALL PLASTER PLINTH PROTECTION FOR OTM AND MD ACCN OF AUNDH MIL STATION UNDER GE MH AND RH KIRKEE

Amount

Taking down cement or cement lime plaster of any description all as specified and directed .

M& L for rendering of external surface 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces finishsed including injecting chemical to the roof for uprooting/cutting of vegetation growth (maximum height upto three stories) using WPC @ 3% by weight of cement all as specified and directed (Note: WPC will be measured and paid seperately)

M&L for rendering of internal surfaces 15mm thick in CM (1:6) on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement ) all as specified and directed

Supply only intergral water proofing compound.

M&L for of preparation of newly plastered surfaces of wall and applying two coats fof oil bound distemper over a coat of alkali resistant primer over 3mm thick Birla wall care putty finished even and smooth, all as speciified and directed

M&L for preparation of new plastered surface and applying two coats of weather proof exterior paint (Apex Ultima or equivalent) over a coat of primer complete all as specified and directed

M & L for complete removal of existing finishes by scraping down old decorative surface of walls with steel wire brushes of smoke spots, moulds, efflorescent salts and applying 3mm thick, Birla putty and making smooth surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer all as specified and directed.

M&L for complete removal of existing finishes by scraping down old decorative surface of walls with steel wire brushes of smoke spots, moulds, efflorescent salts including filling of spots with POP and applying two coats of white wash on old surfaces of walls all as specified and directed.

M&L preparation of old surfaces applying of two coats of white wash on ceiling all as specified and directed.

M&L for applying one coat of weather proof exterior emulsion paint (Apex Ultima or equivalent) upto any height with approved colour and pattern on old surfaces including removing/ uprooting vegetation growths etc complete all as specified and directed.

M & L for complete removal of existing finishes, upto any height, by scraping down of old decorative surface of walls with steel wire brushes of smoke spots, moulds, efflorescent salts and cutting/uprooting vegetations growth, including filling of spots with POP and applying of two coat of cement base paint over a coat of primer all as specified and directed.

M&L for providing water proofing plaster at the junction of wall and slab at chajjas , lintels, etc of average thickness 20mm in CM (1:3) with water proofing compound , finished even and smooth without using extra cement all as specified and directed. Note :- Rates shall deemed to be inclusive of Cost of water proofing compound all as specified and directed.

M&L for rendering 10 mm thick on concrete surface in CM 1 :3 as in ceiling etc. all as specified and directed.

M&L for preparation of new plastered surface and for applying three coats of white wash on ceiling all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding/complete and removing rubbish off the premises complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level ) all as specified and directed

M&L Coloured Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile laid over and including 15 mm thick screed in CM 1:6 all as directed.

Ditto all as per item No 17 above but as in dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM 1:4, set and jointed in neat white or coloured cement to match the surfaces of tiles all as specified and directed.

M&L Coloured Vitrified tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile laid over and including 15 mm thick screed in CM 1:6 all as directed.

M&L glazed ceramic tiles (350x250x7mm or 450x350x7mm) colour tiles on walls etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the work over 10 mm rendering in CM 1:4, all as specified and directed.

M&L glazed ceramic tiles in vertical surface 300 x 200 x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the work over 10 mm rendering in CM 1:4, all as specified and directed.

M&L for 25mm thick, levelling course of cement concrete type B-0 , 1:2:4 (12.5mm graded aggregate) as in flooring for laying tiles all as specified and directed.

M & L Non-skid joint free ceramic coloured tiles 7mm to 8mm thick area of each tile exceeding 0.18 but not exceeding 0.38sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete including 15mm screed bed or bedding layer in CM 1:6 for laying floor finishes all as specified and directed.

All as per item No 23 above, but as in dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM 1:4, set and jointed in neat white or coloured cement to match the surfaces of tiles all as specified and directed.

M&L for 40mm thick PCC type B-1 , 1:2:4 (20mm graded aggregate ) as in flooring all as specified and directed

M&L for 75 mm thick, PCC 1:4:8 type D-2 (using 40mm graded stone aggregate)as in sub base, all as specified.

M&L for Pre polished Chequered cement tiles 30cmx30cmx 25 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:6.

M&L curshed sand filling to the floor including watering and consolidating all as specified and directed by Engr-in-Charge.

M&L for 80mm thick coloured machine pressed interlocking pattern paver block any shape and size conforming to IS 15658-2006 of M-40 Grade laid over 25mm thick sand cutioning layer and grouted with crushed sand incl. dismantling/demolition of old damaged tiles/blocks all as specified and directed by Engineer-in Charge.

M&L for PCC 1:3:6 type C-2 , 75 mm thick as in plinth protection all as specified and directed

Demolition of Stone slabs and tiles of any description or thickness laided bedded and pointed in cement mortar in floors, aprons etc.

M&L machine cut kota stone slab flooring 20-25mm thick in one piece as in treads of straircase etc over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, over 20 mm thick screed bed or bedding in CM 1:4 for laying floor finishes, all as specified and directed.

All as item No 32 here in before but in one piece on vertical surface as skirting over and incl 10 mm thick rendering in CM 1:3 to receive kota stone/slab etc all as specified and directed.

Polishing of old existing Kota stone flooring i.e, cutting , grinding, joints pigment filling and polishing to get mirror finish all as specified and directed.

Demolition of brickwork or stone work/boulder masonary built in cement mortar or cement lime mortar all as specified

M&L for precast cement concrete, type C-1, 1:3:6 (20mm graded aggregate ) masonary with solid blocks, exc , 10cm in width and setting in cement mortar (1:6) complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store, all as specified and directed.

S & F 15 mm bore tubes, medium grade, galvanised, with all fitting & fixed complete to walls & ceiling or laid in floors, all as specified and directed.

All as per item No 38 above but fixing only tubes including new fittings if required complete all as specified and directed.

Cutting chases, pinning in brick walls, making good to facing where required and pointing in cement mortar (1:3) and making good , cutting n.exc 10cm girth all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections and S&F 20mm bore tubes, medium grade, galvanised , with all fitting & fixed complete to walls & ceilings or laid in floors all as specified and directed

S & F 20 mm bore tubes, medium grade, galvanised, with all fitting & fixed complete to walls & ceiling or laid in floors, all as specified and directed.

All as per item No 42, here-in-before but fixing only including new fittings if required complete all as specified and directed.

Supply & fixed in repairs 15mm bore fancy type bib taps, cast copper alloy, with capstan heads,chromium plated , screwed down, screwed for iron pipe or for brass ferrule.

S&F in repairs bib tap suitable for 15mm bore iron pipe , PTMT any colour, screwed for iron pipe and fixed (Min Wt-90 gms) all as specified

Supply & fixed in repairs 15mm bore Stop valves, cast copper alloy, fency type, chromium plated with long or short shank and cup ( concealed type) screwed down high pressure , screwed both ends for iron pipe or for unions.

S&F in repairs 15mm Brass CP wall mixer tap including provision for overhead shower for mixing " Hot or Cold" water screwed down for iron pipe all as directed (Make : Jaguar, CAT Part No FUS- 29273UPR F1014402 of Cera/ F 110018 of Hindware)

S & F in repair PVC valveless syphonic action type flushing cistern (Low or high level) of 10 litre capacity, white/coloured with inlet ball valve, float, handle including fixing brackets and 32 mm bore PVC flush pipe etc complete all as specified and directed. (Make : CERA, Hindware or Equivalent )

S & F in repairs Vitreous China Squatting pan Orissa pattern long pan, size 580 mmX440mm white with `P' or `S' trap, front or back inlet and foot rests any pattern including connection to trap and to flushing pipe, anti-syphonage pipe etc, including trap set in and including concrete complete including making good to floor all as spfd and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white fixing bolts (excluding flushing cistern) but including flush pipe, connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, matching colour seat cover complete , all as specified and directed.

S&F in repairs vitreous china wash hand basin, white of size 550mmx 400mm (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe.

S & F in repairs PVC connection of 450 mm length, suitable for 15 mm bore pipe with PTMT nuts, all as specified and directed.

S & F in repairs PVC connection of 600 mm length, suitable for 15 mm bore pipe with PTMT nuts, all as specified and directed.

S & F in repairs Plastic seat cover to EWC with aluminium hinging device all as specified and directed.

S&F in repairs Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc.

S&F in repairs PVC (SWR) pipes 75 mm dia single sockets, in any length rubber ring joints, laid in trenches or in floor all as specified and directed.

All as per items No 56, here in before but 110mm bore etc all as specified and directed.

S&F in repairs PVC (SWR) branch 75 mm bore piecs, single ( single Y ) equal or unequal all as specified and directed.

S&F in repairs Cast iron soil 100 mm bore , waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors

S&F in repairs Cast iron floor trap 100 mm bore with grating including jointing to waste pipe and fixed with PCC 1:2:4 , all as specified and directed.

ANJALI CONSTRUCTIONS

M/S JAYCONSTRUCTION CO

Sunrise Traders

Aishwarya Constructions