REP TO LEAKAGE, SEEPAGE, SUNKEN TREATMENT AND OTHER B/R WORKS IN AREA-I AND V OF AGE B/R (W) UNDER GE (W) COLABA, MUMBAI

Amount

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the primises all as specified and directed.

M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.06 sqm but not exc 0.11sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles all as specified and directed. Make : Somany Pilkington / Orient bell / Kajaria.

M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exce 0.18 sqm but not exc 0.36 sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles all as specified and directed. Make : Somany Pilkington / Orient bell / Kajaria.

M&L Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exc 0.36 sqm, in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tilesall as specified and directed. Make: Somany Pilkington / Orient bell / Kajaria.

M&L Screed bed or bedding layer of mortar 15 mm thick in (1:6) for laying floor finishes like tiles all as specified and directed.

M&L rendering 10 mm thick on fair faces of brick work in CM (1:4) all as specified and directed.

M&L glazed tiles digital coloured ceramic tiles 300x450x7mm/300x600x7mm thick in vertical surfaces such as skirting and dados set and jointed in neat cement slurry and pointed in coloured cement to match the shades of the tiles all as specified and directed. Make: Somany Pilkington / Orient bell / Kajaria. Note:- Rate of designer border (Highlighter) tiles are included in the quoted item rate.

M&L machine cut, polished cudappah stone slab 20 to 25 mm thick (table rubbed and polished) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing as in kitchen platform, flooring and all other similar works , including laying over 15mm thick cement mortar (1:6) all as specified and as directed.

M&L granite (of any approved colour) 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of the granite stone including grinding and polishing as in kitchen platform, counter for WHB, flooring and all other similar works all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons, dados etc laid, bedded and pointed in any mortar and removal of rubbish off the site all as specified & directed.

M&L for screed bed or bedding layer of cement mortar (1:4), 15mm thick for laying floor finishes all as specified and directed.

M&L machine cut Kota stone slab floorng 20-25 mm thick laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete on floor all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removal to store 15 mm dia bore all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removal to store 20 mm dia bore all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removal to store 25 mm bore pipe all as specified and directed.

Fixing only old 15 mm bore steel tubing and including cleaning in positon walls, ceiling and floor with all fittings and fixtures all as specified and directed.

Fixing only old 20 mm bore steel tubing and including cleaning in positon walls, ceiling and floor etc with all fittings and fixtures all as specified and directed

Fixing only old 25 mm bore steel tubing and including cleaning in positon walls, ceiling and floor etc with all fittings and fixtures all as specified and directed

S&F GI tubing 15mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors all as specified and directed. Make: Jindal / Tata / Swastik

S&F GI tubing 20 mm bore medium grade with all fittings and fixed to wall and ceiling or laid in floors all as specified and directed. Make: Jindal / Tata / Swastik

S&F GI tubing 25 mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors all as specified and directed. Make: Jindal / Tata / Swastik

S&F GI tubing 40 mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors all as specified and directed. Make: Jindal / Tata / Swastik

Cutting chases, pinning in and making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good, cutting nexc. 10cm girth all as specified and directed.

S&F in repairs vitreous China wash down water closet pan (pedestal pattern) white, including trap, connection to drain and flushing pipe (excluding flushing cistern) including seat cover for pedstal pan all as specified and directed. Make: Cat Part No S1050102 of Cera or Equivalent in Hindware / Parryware.

S&F in repair two peice vitreous China wash down water closet pan (pedestal pattern) white, including trap, connection to drain and flushing pipe, including flushing cistern, soft close seat cover for pedstal pan complete all as specified and directed. Make : Cat Part No S1021105 of Cera or Equivalent in Hindware / Parryware.

S&F in repair vitreous China wash basin white, flat back, size 580X450 mm including cutting for pinning in ends of brackets,complete all as specified and directed. Make : Cat Part No S2040139 of Cera or Equivalent in Hindware / Parryware.

S&F in repairs 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of ant size complete all as specified and directed. Make : Cat Part No B1010106 of Cera or Equivalent in Hindware / Parryware.

S&F in repair counter sunk wash basin oval shape 550x460mm fixed with waste coupling & waste pipe & accessories of any size all as specified and directed. Make: Cat Part No 10095 of Hindware or equivalent in Cera / Parryware.

S&F wash hand basin table top of size 460x345x130 mm vitrous China including, waste coupling & PVC waste pipe of 32 mm dia all as specified and directed. Make: Kerovit cat part No - YORKSHIRE - KO2085 /Kohler complete all as specified.

S&F vitreous china wash hand basin 550X 400mm (flat ball type) any size incluidng cutting for and pinning in ends of brackets and fixing of supply and waste water pipe complete fixed including CP pillar tap all as directed & specified. Make: Hindware / Parryware

S&F in repair wall mounted water closet pan of size 520x360x410mm fixed with anchor fastener, outlet pipe & accessories of any size all as specified and directed. Make: Cat Part No20104 of Hindware or equivalent in Cera / Parryware.

S&F as in repair 15 mm bore fancy type angular valve cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions all as specified and directed. Make: ESS ESS CROMA Cat Part No C 204 or Equivalent of Jaquar/Paryag

S&F in repairs 15 mm bore chromium plated Angular stop valve with wall flange of cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed all as specified and directed. Make: Kerovit Cat Part No - KB2111003 /Kohler

S&F as in repair 15 mm bore fancy type concealed stop cock (regular body) cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 332 or Equivalent of Jaquar

S&F as in repair 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed screwed both ends for iron pipe or for unions all as specified and directed.

S&F as in repair 40 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed screwed both ends for iron pipe or for unions all as specified and directed.

S&F PVC connection 15mm size PTMT nuts of length 450 mm all as specified and directed.

S&F as in repair 15 mm bore fancy type bib taps long body cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 202 or Equivalent of Jaquar

S&F 15 mm dia bore fancy type chromium plated long body bib taps with wall flange cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe, or for brass ferrule all as specified and directed. Make: Kerovit Cat Part No - KB1311033 /Kohler.

S&F as in repair 15 mm bore fancy type 2-in-1 bib taps long body cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule. with wall flange all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 203 or Equivalent of Jaquar

M&L in repair for 15 mm bore fancy type wall mixer with 115 mm long bend pipe for connection to overhead shower (with bush and piston Divertor fittings) with aerator all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 216 or Equivalent of Jaquar .

S&F wall mixer 3-in-1 system with provision for both hand shower and overhead shower with 115 mm long bend pipe, connecting legs and wall flange (without hand an overhead shower) Make: Kerovit Cat Part No -KB1511019 /Kohler

M&L in repair for fancy type 15 mm bore central hole basin mixture with 'U' shaped round casted spout with 3" long pipe connection with aerator all as specified and directed. Make : Jaquar Cat Part No CON-169KNB or Equivalent of Prayag

S&F in repairs 15 mm bore chromium plated Angular stop valve with wall flange of cast copper alloy screwed down high pressure with crutch butter fly handle screwed both ends for iron pipe or for unions and fixed all as specified and directed. Make Kerovit Cat Part No - KB2111003 /Kohler complete all as specified.

S&F in repair 15 mm bore, brass chromium plated, fancy type health faucet with SS connection pipe 1 mtr long all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 232D or Equivalent of Jaquar/ Parko.

S&F in repair fancy type CP Towel Rail 61 cm long all as specified and directed. Make : ESS ESS CROMA Cat Part No C 412 or equivalent of Jaquar/ Parko.

S&F in repair CP Towel Ring all as specified and directed. Make:- ESS ESS CROMA Cat Part No AC 502 or Equivalent of Jaquar/ Parko

S&F in repair CP soap dish all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 414 or Equivalent ofJaquar/ Parko.

S&F in repair CP toilet paper holder all as specified and directed. Make:- ESS ESS CROMA Cat Part No AC 206 or Equivalent of Jaquar/ Parko.

S&F toilet paper holder of stainless steel fixed to wall with CP brass screw all as specified and directed. Make: Kerovit Cat Part No- KA 980009 or Kohler complete all as specifed and as directed.

S&F in repairs CP Towel Bracket 61 cm long all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 423 or Equivalent of Jaquar/ Parko

S&F sheet glass corner shelf assembly consisting of 5.5 mm thick 12 cm wide with chromium plated bracket guard and railing 60 cm long all as specified and directed. Make: Jaguar or equivalent

S&F 15 mm bore overhead shower of size 150x150mm single flow (ABS body chrome plated with grey face plate) with rubit cleaning system including shower arm 200 mm long (stainless steel) square shape with wall flange all as specified & directed. Make:- Cera Cat Part Not F7010506AB or Equivalent of Jaquar / Parko.

S&F as in repair stainless steel grating round 125mm size of anti- cockroach, anti-clog, anti faul all as specified and directed.

S&F in repair 15 mm bore pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down, fancy type high pressure, with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts all as specified & directed. Make: ESS ESS CROMA Cat Part No C 201 or Equivalent of Jaquar / Parko.

S&F brass CP pillar cock with extension body including all necessary fittings screwed down for iron pipe for Wash Hand Basin all as specified and directed. Make: Kerovit Cat Part No - KB411002/Kohler

S&F in repair water closet seat cover any coloured pattern with flat bottom and mild steel chromium plated or aluminium hinging devices complete all as specified and directed. Make : Cat Part No S1020101 of Cera or Equivalent in Hindware / Parryware.

S&F in repair sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement morter to dwarft wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410 mm x 330mm x 160mm all as specified and directed. Make: Blue Star Model No SBSD-127 or equivelant of Nirali / Prayag

S&F in repair Kitchen sink without drainage board made of stainless steel 1 mm thick, with plugs, washers and waste pipe & coupling including bedding in cement morter to dwarf wall or including fixing GI cantilever brackets as per site requirement and connecting with suitable size of pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 178mm (or nearest size as per Cat Part specified) all as specified & directed. Make: Blue Star Model No SSSB-06A or equivalent of Nirali / Prayag.

M&L in repair 75 mm dia PVC(SWR) multi floor trap with grating including jointing with solvent cement all as specified and directed. Make: Prince / Finolex

Demolition of cement concrete in ground floor & paving n. exc 15 cm thick (below or above GL) unreinforced all as specified and directed.

M&L PCC 1:4:8, type D2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete and sunken floor treatments all as specified and directed.

M&L for repairs to sunken portion of slab.Treatment of sunken floor slab compraises of the following specifications and all as specified :- (i) M&L for cleaning the sunken/lowered portion of RCC slab surface (including vertical total depth plus skirting height) of floors by wire brush, chisel out any mortar sticking to the surface and brooming completely. 40mm averagee thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in padding concrete to achieve proper slope including cutting holes in bricks or RCC wall for spout (ii) Rendering of uneven surfaces with 6mm thick in CM 1:4 mixed with integral water proofing compound @ 3% by wt of cement consumed. Fill it with water and check dampness and seepage. Where dampness/seepage is noticed, nozzles shall be fixed and grouting carried out. (WPC shall be measured & paid separately) (iii) All junction points of side wall where CI/GI pipes are passing through shall be sealed with epoxy puty . (iv) After drying putty, wash the slab and sides of sunken portion with water and make it clear and clean. (v) M&L for applying two coats of polymer modified cementious water proof coating with DR. Fixit Pidicrete URP with cement Ratio 1:1.5 as per manufacturs instruction to bottom and vertical sides up to finished floor level +100mm height. The thickness of two layer shall be 1mm. When the second layer is still sticky, coarse sand spray shall be carried for the vertical and bottom surface of the sunken portion all as specified and directed. (vi) Plaster the bottom and sides up to full height of sunken with minimum 20mm thick CM 1:4 mixed with integral water proofing compound (DR.Fixit LW+) 3% by wt of cement consumed as per manufacturer's specification including rounding of corners and junctions sloping towards spout.(WPC shall be measured & paid separately) (vii) All pipes laid in sunken portion shall be covered with 50mm thick PCC 1:3:6 all round after painting with anticorrosive paint Note 1 :- Test the water proofed area (ponding test) by filling water for at least 72 hours and tested for leakage seepage and to the entire satisfaction of GE. Test shall be done in presence of reps of MES and record for each sunken slab shall be maintained. Cost of testing is inclued in the rates quoted above. For the purpose of payment area of bottom and sides of sunken shall be measured in sqm

Supply only liquid water proofing compound all as specified and as directed. Make : Pidilite / Sika / Fosroc.

S&F in repair vitreous China squatting pan, ' Orissa patteren, size 580 x 440 mm white, with integral footrests (excluding flushing cistern and flush pipe) including taking down existing squating pan all as specified and directed. Make : Cat Part No S3010104 of Cera or Equivalent in Hindware / Parryware.

M&L for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 1mm thick (average) Birla wall putty all as specified & directed. Make : Asian Paints

Dismantling Asbestos sheeting, any gauge, thickness, roof coverings including scafoldings of any hieght all as specified and directed.

Dismantling of framed work of timber scantlings 40 sq. cm and over in section, in any position all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based trapezoidal/mangalore tile profile roofing sheets, chajjas, 0.50 mm thick of any colour/length having tensile strength of 550 MPA as in roof coverings having effective & overall width 1015 mm &1072 mm respectively, profile height 28.5 mm and centre to centre distance between ribs 203 mm fixed with self tapping screws as directed by manufacturer on wooden/steel members including scafoldings of any height of the bldg all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPA as in roof coverings /claddings to wall, fixed with self tapping screws including scafoldings of any hieght all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.

S&F joist, channel, angle, or tee sections, or MS Flats fixed independently without connecting plates,etc Fe 410-W (Gde-E- 250) quality- A (cut to ordinary lengths i.e within 20mm of length indicated) as in frame work for Galvalume / CGI chajjas all as specified and directed.

S&F structural steel work in tubular/square tube trusses including special shaped washer, gusset/bearing plate etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 all as specified and directed.

S&F in repairs to replace old or decayed boarding in patches including cutting out old, piecing, heading joints etc 20 mm thick second class hardwood clean sawn boarding fixed with nails with butt joints in any situation including scafoldings of any hieght all as specified and directed.

Fixing only in repairs in patches including cutting out old, piecing, heading joints etc 20 mm thick second class hardwood clean sawn boarding fixed with nails with butt joints in any situation including scafoldings of any hieght all as specified and directed.

M&L in repairs to replace old or decayed boarding in patches including cutting out old, piecing, heading joints etc second class hardwood wheather boarding, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20 mm thick and fixed with 30 mm laps and removing dismantled boarding in any situation including scafoldings of any hieght all as specified and directed.

Dismantling Mangalore patteren or similar tiles in roofing including portions bedded in cement mortar of any hieght including scafolding all as specified and directed.

M&L for roof tiles, Mangalore Pattern, interlocking at side joints, laid dry including scafoldings of any hieght all as specified and directed.

Fixing only roof tiles, Mangalore Pattern, interlocking at side joints, laid dry including scafoldings of any hieght all as specified and directed.

M&L for ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in cement mortar 1:6 all as specified and directed.

Fixing only ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in cement mortar 1:6 including scafoldings of any height all as specified and directed.

Dismantling of roof battens for tiles, shingles etc, of any size including tilting fillets spaced n exc 15 cm of any description in any position all as specified and directed.

M&L second class hardwood clean sawn battens at 30cm centres sectional area exc 15 & n exc 25 Sqcm including scafoldings of any hieght all as specified and directed.

Fixing only second class hardwood clean sawn battens at 30cm centres sectional area exc 15 & n exc 25 Sqcm including scafoldings of any hieght all as specified and directed.

M&L for preparation of new wooden surfaces of any description, not otherwise described,over 10 cm width or girth and applying two coats of synthetic enamel paint (ordinary paint tint) (each coat) over a coat of pink primer including scafoldings of any hieght all as specified and directed.

M&L for preparation of old decorated wooden surfaces of any description, not otherwise described,over 10 cm width or girth and applying two coats of synthetic enamel paint (ordinary paint tint) (each coat) over a coat of pink primer including scafoldings of any height all as specified and directed.

M&L in repair to replace old decayed timber (including piecing, scarifying, etc of old and new timber if required) second class hard wood clean sawn in scantlings timber framed and fixed in any position and description including scafoldings of any hieght all as specified and directed.

M&L for preparing surfaces of battens, any size and spacing, and treated all over with creosote (measured overall on one side only, spaces not deducted) including scafoldings of any height all as specified and directed.

M&L for providing and applying two coats of Fiber Reinforced elastomeric Liquid applied membrane of Dr Fixit or equivalent make, having crack bridging ability upto 2.5 mm, resistance to positive hydrostatic pressure of upto 10 bars, superior anti-carbonation, 1st coat self-priming coat & 2nd coat undiluted coat ensuring force coverage of 30 Sq. ft/kg for 2 coat with 160 micron DFT, applying one coat of thick modified acrylic silica base texture (2mm to 2.5 mm thick) as per desired pattern and 8 hours two coats of Ultra durable pure acrylic exterior emulsion with Low VOC, Anti Algal, Excellent DPUR for dust pick up resistance of fading of colors ensuring 60 micron DFT for two coat including removing existing roof treatment and providing 40 mm thick PCC 1:2:4 all as directed by Engineer-in-Charge. Note: Item to be executed by authorised applicator only. Make: Dr Fixit or equivalent.

Demolition of ceiling boards of any description, and any thickness including cover fillets and frame work all as specified and directed.

M&L powder coated aluminium snap grid having a size of 605mm x 605mm and sections incorporated in frame work shall conform to IS 733, IS 737 and IS 1285 and snap grid frame work shall be fixed to ceiling with supporting hanger 6mm dia mild steel rod, J bolts with necessary bolts, nuts and washers all as per manufacturer's instruction. The main & cross tees shall be jointed at junction/crossings with anodized aluminum angle bracket of size 19.05mm x 19.05mm x 1.45mm, weighing 0.14 Kg per RM, fixed with suitable mild steel, bolts nuts and washer all as per manufacturer's instruction, the snap grid shall be supported at ends all along the wall with anodized aluminum angle of size 38mm x 25mm x 2.18mm, weighing 0.358 Kg per running meter all as specified and directed.

S&F 9mm thick PVC laminated gypsum ceiling tiles of size 600mm x 600mm, square edge, front side laminated PVC and back side aluminium foil all as specified and directed.

Demolition of brick work or stone /boulder masonry built in cement mortar, including all quoins, arches, pillars all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM (1:6) all as specified and directed.

Taking down cement plaster of any description from brick wall surfaces etc including racking out joints, hacking for key, scrubbing down with water etc including all necessary scaffolding arrangments of any height all as specified and directed.

M&L for cement mortar (general purpose, factory made, for outdoor use having bulk density (of dry mix) 1600 kg per cubic metre, wet density (after mixing) 1800 kg per cubic metre, dry density after setting 1800 kg per cubic metre, pot life 60 minutes, compressive strength 1.5 Mpa to 5 Mpa, made using well graded manufatured sand filler, portland cement & polymer binder, and chemical additives) for external rendering 12mm to 15mm thick on brick wall or concrete surfaces including making groove of appropriate size and finishing sand faced finished using sponge including all necessary scaffolding arrangments of any height all as specified and as directed.

M&L for cement mortar (general purpose, factory made, for Indoor use having bulk density (of dry mix) 1600 kg per cubic metre, wet density (after mixing) 1800 kg percubic metre, dry density after setting 1800 kg per cubic metre, pot life 60 minutes, compressive strength 1.5 Mpa to 5 Mpa, made using well graded manufatured sand filler, portland cement & polymer binder, and chemical additives) for internal rendering 10mm to 12mm thick on brick wall or concrete surfaces including making groove of appropriate size and finishing sand faced finished using sponge including all necessary scaffolding arrangments of any height all as specified and as directed.

Supply only liquid water proofing compound LW+ of Dr. fixit or equivalent all as specified and directed.

M&L for preparation of surfaces cracks of plaster internal/external of walls, ceilings, chajjas upto 5 mm wide, remove the loose plaster/concrete by suitable tools, filling cracks with crack paste compound and apply the second coat after 10-12 hrs of application of first coat including necessary scafolding of any hieght all as specifed and directed. Make :- Use of Dr Fixit 'X' paste compound/ Build Core Compound / Fosroc Compound, as approved by GE through their authorised applicator only.

M & L for preparation of surfaces by cutting 'V' groove cracks of plaster internal/external of walls, ceilings/Chajjas all along the crack 5 mm to 10 mm and remove the loose plaster/concrete by suitable tools, filling cracks with crack paste compound and apply the second coat after 10-12 hrs of application of first coat and for external application must be coated with paint including necessary scafolding of any hieght complete all as specifed and directed. Make : Use of Dr Fixit 'X' paste compound/ Build Core Compound / Fosroc Compound, as approved by GE through their authorised applicator only.

M&L for repair to damaged surface of RCC elements like beams, columns, wall by removing all loose cement plaster/concrete, providing and laying of micro-concrete more than 20mm thickness (Avg) by using the recommended water powder ratio mix the micro-concrete with pan mixer as per manufacturer's instruction including watertight shuttering necessary curing for 7 days complete all as specified and directed by Engineer - in - Charge. Note : Micro concrete will be measured and paid separately. through authorised applicator of Dr Fixit/Build core/Fosroc/Peditilite as approved by GE.

Supply only micro-concrete for repair or build core all as specified and directed.. Make : Dr Fixit/Build core/Fosroc/Peditilite

M&L for preparation of surface of reinforced bar by applying rust remover and then applying a coat epoxy zinc primer on exposed reinforced surface all as specified and directed. Make : Use of Dr Fixit 'X' paste compound/ Build Core Compound / Fosroc Compound, as approved by GE through their authorised applicator only. Note : Surface area for concrete shall be measured for payment purpose.

M&L for preparing New surfaces of walls/ceilings and applying two coat of weather proof acrylic exterior paint (100% Acrylic) of Apex Ultima, over a coat of primer and scaffolding where required at any height for external painting all as specified and directed. Make:

M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 1mm thick (average) wall putty all as specified and directed.

M&L for preparation of old plastered surfaces and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 1mm thick (average) wall putty all as specified and directed.

M&L for 5 mm thick plaster in CM (1:3) on ceiling surfaces and finish the surface even and smooth without using extra cement all as specified and directed.

M&L for prepartion of newly plastered ceiling surfaces and applying three coat of white wash all as specified and directed. Make: Asian paints

M&L for preparation of new or previously untreated surfaces of steel and applying two coats of synthetic enamel paint over a coat of primer red oxide, zinc chrome primer all as specified and directed.

Demolition of RCC in any position including cutting of reinforcement as required and removing of debries outside of MOD land all as specified and as directed.

Cleaning of RCC water tanks of 5000 to 10000 litres of various capacity in existing position by mechanised pressure cleaned by Mechanical high pressure spray and steel wire brush to remove algae/dirt/foregin completely and soaking out water/dirt with a high pressure wet vaccume pump and removing spoils outside of MD land and providing sticker showing the date of cleaning all as specified and directed.

Cleaning of PVC water tanks of capacity exc 250 litres but not exc 500 litres including chemical treatment with Anti-bacterial agent consisting of following process: - Dewatering the tank with submersible pump, de-silting and removing of left over dirty water up to 100 to 150 mm in the bottom of the tank and sludge with special sludge pump, cleaning of walls and ceiling with special mechanized high pressure jet machines by rotary jet system at 100-120 Bar pressure (120 Kg /sq cm) which dislodges the layer of dirt, algae, fungus stuck on its surface usage of scrubbing machines for old stains and cleaning chemicals if required of make Eureka Forbes Ltd, floor of the dirty tank should be thoroughly cleaned up by fry jet cleaner to accumulate all dirt ,the remaining sludge should than be removed by sludge pumps, the dirt silt and other foreign material should further be removed by Industrial Vacuum Cleaners to make the floor totally dirt free, application/spraying of Anti-Bacterial chemicals to ensure total sterilization of tank from the inside, inside of the tank should be treated with specially developed 4 ft long ultraviolet Radiator to kill further floating bacteria/virus in order to make the tank totally clean, bacteria free and safe for storage of drinking water. All the above operations should be executed by trained workers and technicians, properly dressed along with gum boots, to work as per the direction of Engineer in charge. Note : Date of cleaning will be marked on water tank.

Cleaning of PVC water tanks of capacity exceeding 501 litres but not exceeding 1000 litres including chemical treatment with Anti-bacterial agent consisting of following process: - Dewatering the tank with submersible pump, de-silting and removing of left over dirty water up to 100 to 150 mm in the bottom of the tank and sludge with special sludge pump, cleaning of walls and ceiling with special mechanized high pressure jet machines by rotary jet system at 100-120 Bar pressure (120 Kg /sq cm) which dislodges the layer of dirt, algae, fungus stuck on its surface usage of scrubbing machines for old stains and cleaning chemicals if required of make Eureka Forbes Ltd, floor of the dirty tank should be thoroughly cleaned up by fry jet cleaner to accumulate all dirt ,the remaining sludge should than be removed by sludge pumps, the dirt silt and other foreign material should further be removed by Industrial Vacuum Cleaners to make the floor totally dirt free, application/spraying of Anti-Bacterial chemicals to ensure total sterilization of tank from the inside, inside of the tank should be treated with specially developed 4 ft long ultraviolet Radiator to kill further floating bacteria/virus in order to make the tank totally clean, bacteria free and safe for storage of drinking water. All the above operations should be executed by trained workers and technicians, properly dressed along with gum boots, to work as per the direction of Engineer in charge. Note : Date of cleaning will be marked on water tank.

Cleaning of PVC water tanks of capacity exceeding 1001 litres but not exceeding 3000 litres including chemical treatment with Anti-bacterial agent consisting of following process: - Dewatering the tank with submersible pump, de-silting and removing of left over dirty water up to 100 to 150 mm in the bottom of the tank and sludge with special sludge pump, cleaning of walls and ceiling with special mechanized high pressure jet machines by rotary jet system at 100-120 Bar pressure (120 Kg /sq cm) which dislodges the layer of dirt, algae, fungus stuck on its surface usage of scrubbing machines for old stains and cleaning chemicals if required of make Eureka Forbes Ltd, floor of the dirty tank should be thoroughly cleaned up by fry jet cleaner to accumulate all dirt ,the remaining sludge should than be removed by sludge pumps, the dirt silt and other foreign material should further be removed by Industrial Vacuum Cleaners to make the floor totally dirt free, application/spraying of Anti-Bacterial chemicals to ensure total sterilization of tank from the inside, inside of the tank should be treated with specially developed 4 ft long ultraviolet Radiator to kill further floating bacteria/virus in order to make the tank totally clean, bacteria free and safe for storage of drinking water. All the above operations should be executed by trained workers and technicians, properly dressed along with gum boots, to work as per the direction of Engineer in charge. Note : Date of cleaning will be marked on water tank.

Cleaning of PVC water tanks of capacity exceeding 3001 litres but not exceeding 5000 litres including chemical treatment with Anti-bacterial agent consisting of following process: Dewatering the tank with submersible pump, de-silting and removing of left over dirty water up to 100 to 150 mm in the bottom of the tank and sludge with special sludge pump, cleaning of walls and ceiling with special mechanized high pressure jet machines by rotary jet system at 100-120 Bar pressure (120 Kg /sq cm) which dislodges the layer of dirt, algae, fungus stuck on its surface usage of scrubbing machines for old stains and cleaning chemicals if required of make Eureka Forbes Ltd, floor of the dirty tank should be thoroughly cleaned up by fry jet cleaner to accumulate all dirt ,the remaining sludge should than be removed by sludge pumps, the dirt silt and other foreign material should further be removed by Industrial Vacuum Cleaners to make the floor totally dirt free, application/spraying of Anti-Bacterial chemicals to ensure total sterilization of tank from the inside, inside of the tank should be treated with specially developed 4 ft long ultraviolet Radiator to kill further floating bacteria/virus in order to make the tank totally clean, bacteria free and safe for storage of drinking water. All the above operations should be executed by trained workers and technicians, properly dressed along with gum boots, to work as per the direction of Engineer in charge. Note : Date of cleaning will be marked on water tank.

S&F in repairs 500 ltr rotational moulded PVC tank 3 layer in position at any location on top of the building including removing existing tank disconnecting all incoming and out going connections, provision of new fittings including with float valve 15mm bore all as per existing requirements all as specified and directed. Make :Sintex ,polycon , Plasto

S&F in repairs 1000 ltr rotational moulded PVC tank 3 layer in position at any location on top of the building including removing existing tank disconnecting all incoming and out going connections, provision of new fittings including with float valve 15mm bore all as per existing requirements all as specified and directed. Make :Sintex ,polycon , Plasto

S&F in repairs 1500 ltr rotational moulded PVC tank 3 layer in position at any location on top of the building including removing existing tank disconnecting all incoming and out going connections, provision of new fittings including with float valve 15mm bore all as per existing requirements all as specified and directed. Make :Sintex ,polycon , Plasto

S&F in repairs 2000 ltr rotational moulded PVC tank 3 layer in position at any location on top of the building including removing existing tank disconnecting all incoming and out going connections, provision of new fittings including with float valve 15mm bore all as per existing requirements all as specified and directed. Make :Sintex ,polycon , Plasto

S&F in repairs 5000 ltr rotational moulded PVC tank 3 layer in position at any location on top of the building including removing existing tank disconnecting all incoming and out going connections, provision of new fittings including with float valve 15mm bore all as per existing requirements all as specified and directed. Make :Sintex ,polycon , Plasto

S&F in repair Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe of 15mm size, minimum weight 142 grams all as directed by the Engineer-in-charge. Make: Prayag

S&F in repair Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe of 20mm size, minimum weight 210 grams all as directed by the Engineer-in-charge. Make: Prayag

S&F in repair Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe of 25mm size, minimum weight 455 grams all as directed by the Engineer-in-charge. Make: Prayag

S&F in repairs powder coated aluminium sections for windows, ventilators including fabrication of frame shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc. including all accessories such as glazings clips, and rubber beadings for fixing glass panes in frame all as specified and directed. Note: (i) Glass panes will be measured & paid separately . (ii) The quoted rate shall be inclusive of cost of rubber beading and glazing clips however it will not be weighed and not paid separately. Joints between wall and aluminium window shall be sealed with silicon. (iii) All other minor details including cost of locking arrangement shall be included in the quoted rate.

M&L for 5.5 mm thick sheet glass, ordinary quality and glazing with aluminium beads and rubber gaskit in square exc 0.5 sqm in each pane frosted on one side all as specified and directed.

S&F aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples all as specified and directed.

S&F in repair CI black colour, heavy duty round shape with dia 450mm double seal with locking arrangement specially designed for overhead tank, fixing at any height all as specified and directed by Engineer-in-charge.

RAMESH ENTERPRISES

SHREE JAGDISH FURNITURE CO.

SAHI SAGAR ENTERPRISES

Unitech Enterprises

K.C.P ENTERPRISES

NATH CONSTRUCTION

Frends Enterprises

Bidder Name

Unitech Enterprises

Frends Enterprises

K.C.P ENTERPRISES

RAMESH ENTERPRISES

NATH CONSTRUCTION

SHREE JAGDISH FURNITURE CO.

RUPESH CONSTRUCTION CO

SAHI SAGAR ENTERPRISES