ADDITION/ALTERATION CUM SPECIAL REPAIRS TO OFFRS, JCOs / ORs MD ACCN AT AYODHYA CANTT UNDER AGE(I) AYODHAYA CANTT

Amount

Demolition of cement concrete reinforced as in chajja, Chulla Hood, cooking platform and similar suspended work complete all as specified and directed .

M&L for Reinforced Cement Concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) for slab supported on wall, beams and column in floors, roofs, landings, balconies, canopies deck slabs and in shelves complete all as specified and directed .

M&L for TMT bars 10mm dia and over, cut to length bent to shape required including crancking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for Brick work with fly ash brick straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 with complete all as specified and as directed.

M&L for Brick work with fly ash brick straight or curved on plan exceeding 6 mtr mean radius built in cement mortar 1:6 complete all as specified and as directed.

Dismantling brick tiles any size laid bedded and pointed in any mortar complete all as specified and directed .

Demolition of mud in roofs any thickness and in any position and leaping over roof terrace, removing the demolished material to a distance exc 250 m & not exc 500 m and depositing where directed at a level n exc. 1.5 m above starting point complete all as specified and as directed.

M&L for PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) in roof padding finishing the surface fair & even complete all as specified and as directed.

M & L for preparation of newly plastered surface of roof including cleaning the surface by using wire brush/ pressure hose and applied high performance polyurethane liquid membrane roof casting cold applied @ 1.5 Kg/Sqm in two coats, applied with spray/brush an elongation of 300% to 700% and tensile strength of not less than 3N/Sqmm as per ASTM D412 and ASTM D2370, crack bridging ability of 3.5 mm as per ASTM C 1305, shore a hardness of not less than 60 as ASTM D 2240 over applying a coat of epoxy prime @ 0.15 Kg/Sqm over a geotextile of 40 GSM to be applied as per manufacturer's instructions and sound engineering practice complete all as specified and directed.

M&L screed bed 10 mm thick in cement mortar 1:3 over roof slab mixed with and including water proofing compound as per manufacturer’s instructions finished even & fair complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick (400mmX400mm square) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile/ existing surface over and including 15 mm thick screed bedding in cement mortar (1:6) complete all as specified and as directed.

M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match match the tile/ existing surface over and including 15 mm thick screed bedding in cement mortar (1:6) complete all as specified and as directed.

M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in vertical surface, skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match match the tile/ existing surface over and including 10 mm thick rendering in cement mortar 1:4 Complete all as specified and directed.

M&L for Coloured Glazed ceramic tiles in vertical surface 450mmX 300mmX 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match match the tile/existing surface over and including 10mm thick plaster in cement mortar (1:4) complete all as specified and directed.

M&L for coloured double charged/ultra charged Vitrified Ceramic tiles 8 to10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

M&L for coloured double charged/ultra charged Vitrified Ceramic tiles 8to10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles/existing surface over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and as directed.

M&L for 15to18 mm thick Granite slab work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in 20 mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounded/half rounded edge and hole for gas pipe in pre-cast slab as well as stone slab in cooking platform complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete all as specified and as directed.

M & L for green Marble work 18 to 21 mm thick (table rubbed and polished) in steps, riser, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed .

Demolition of cement Concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) including chequered tiling and Paver blocks complete all as specified and directed .

M&L for 1st quality non skid coloured ceramic ENDURA tiles not exc 0.11 Sqm each and 10 mm thick set and jointed in neat cement slurry & pointed with coloured cement to match in floor over and including 15 mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

M&L for 75 mm thick cement concrete type C-2, 1:3:6 (using 40mm graded crushed stone aggregate) finished cement concrete surface even and smooth without using extra cement in floor complete all as specified and directed .

M&L for 75 mm thick PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in plinth protection surface finished even and smooth without using extra cement of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3) complete all as specified and directed.

Taking down cement plaster on brick or stone walls or ceiling etc including racking out joints, hacking for key, scrubbing down with water etc. Complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work in CM in 1:4 finished even and fair and mixing with liquid water proofing compound as per manufacturer instruction external surface all complete all as specified and directed. Note:- Liquid water proofing compound shall be measured and paid separately under respective item of BOQ.

Supply only Liquid water proofing compound of approved make complete all as specified and directed .

M&L for rendering 10mm thick in CM (1:6) on Brick/ Concrete surface finished even and fair on internal surfaces of wall complete all as specified and directed.

M&L for rendering 5 mm thick in CM 1:3 on concrete surface in ceiling complete all as specified and directed .

M&L for preparation of new plastered surface and applying two coat of oil bound distemper on walls over a coat of primer including 1mm thick wall care putty complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coat of oil bound distemper on walls over a coat of primer and including 1 mm thick wall care putty complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying two coats of oil bound distemper complete all as specified and directed.

M&L for preparation of old surfaces of ceiling and applying two coats of oil bound distemper complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings heads, shoes, bends, swan-necks, etc., incl cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories)

S&F 110mm PVC (SWR) pipes single socketed, excluding fittings in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 75mm PVC (SWR) pipes single socketed, excluding fittings in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall incl necessary clamp etc complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall incl necessary clamp etc complete all as specified and directed.

S&F in repair 110mm PVC (SWR) bends with access door complete all as specified and directed.

S&F in repair 110mm PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair 75mm PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair 75mm PVC (SWR) bends any radius with acess door complete all as specified and directed.

S&F in repair 110mm PVC (SWR) junction single, (Single T) equal or unequal with acess door complete all as specified and directed.

S&Fin repair 110mm PVC (SWR) vent cowl complete all as specified and directed.

S&F in repair 75mm PVC floor trap plain with grating including jointing with solvent cement

S&F in repair Stack clamps made out of 50mm x 5mm flat iron & 16mm round iron stays including bolts & nuts and securing ends of stays for 100mm bore pipe.

Description all as per item No. 47 above but 75mm complete all as specified and directed.

M&L for Cutting chases pinning in , making good to facing where reqd. and pointing in CM 1:3 to ends or edges of landing , steps, cills, sunshades,selfs lintels etc. and cutting chases for conceled for water tubing or conceled condute wiring etc and making good, cutting n.exc 10cm girth complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removal to store 15mm bore pipe complete all as specified and directed..

S&F 16 mm outer diameter CPVC Pipes SDR 11 & Plain CPVC SDR 11 fittings on wall/ceiling or laying in floors complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removal to store 20mm bore pipe complete all as specified and directed..

M&L 20mm bore GI tubing medium grade with all fittings and fixed complete to walls/ ceiling or laid in floors complete all as specified and directed by Engineer-in-Charge.

Refixing old steel tubing 20 mm dia and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.

S&F in repair 15 mm size CP brass fancy type bib cock (Straight line model) with wall flange (chromium plated) complete all as specified and directed.

S&F in repair 15 mm size CP brass angular stop cock with wall flange (chromium plated) complete all as specified and directed.

S&F in repair Vitreous china wash down water closet pedestral pan white, including 10 ltrs PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of polythylene of low or high density or PVC 32mm dia, Plastic water closet seat, closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminium hanging device, complete all as specified and as directed.

S&F in repair brass chromium plated 2 way bib cock with wall flange 15 mm dia including fixing to pipe complete all as specified and directed

S&F in repair Health faucet brass body with 8 mm dia 1.00 m long flexible tube and wall hook including fixing complete all as specified and directed

S&F in repair stainless steel toilet paper holder with flat recessed type complete all as specified and directed.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed

S&F in repair Corner glass shelf with brass chromium plated bracket fixed to wall complete all as specified and directed .

S&F in repair Sinks with drainage board made of stainless steel l mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair 15 mm bore CP brass Sink Mixer with regular swing spouts (wall mounted model) with connecting legs and wall flanges complete all as specified and directed.

S&F in repair vitreous china wash hand basin white flat back size 550mm x 400 mm excluding taps waste chain and plug but including bracket, waste coupling of 32 mm size fixed in repair complete all as specified and directed by Engineer-in-Charge.

S&F in repair 15 mm bore CP brass single lever basin mixer without popup waste with 450mm long braided hoses for mixing hot and cold water complete all as specified and directed.

S&F in repair 15 mm bore brass CP wall mixer with provision of overhead shower with 115 mm long bend pipe on upper side, connecting legs and wall flanges for iron pipe and fixed complete all as specified and directed.

S&F in repair Brass chromium plated shower rose 125 mm size and fixed complete all as specified and directed

S&F soap dispenser with glass bottle complete all as specified and directed

Supply and fixing 500 liters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete and including dismantling of old PVC tank/RCC tank of any size or capacity complete all as specified and directed.

Supply and fixing 1000 litres capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete and including dismantling of old PVC tank/RCC tank of any size or capacity complete all as specified and directed.

S&F in repair 20 mm dia Gun metal, globe or gate valves,with iron wheel head,screwed both ends for iron pipes and fixed complete all as specified and directed..

S&F in repairs, PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F 32mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 and fittings, fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

S&F 40 mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 and fittings, fixed complete to walls, ceilings or in floors etc complete all as specified and directed..

S&F in repair Kitchen rack plate of stainless steel of size 75 x 60cm all as per sample kept with GE office complete all as specified and directed.

S&F in repair brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges including brackets fixed to wall complete all as specified and directed

S&F in repair brass chromium plated Tumbler holder all as specified as approved by Engr-in-charge.

S&F in repair SS soap dish complete all as specified and directed

Demolition of PCC of any description and in any position not specifically provided for complete all as specified and directed

M&L for Treatment to sunken floor and sides as mentioned here after:- (Step-I)Cleaning of RCC surface to remove existing treatment to sides and base slab by using sand blasting with compressed air. (Step-II)M&L application of a coat to sides and base of sunken with glass fibre reinforced acrylic modified cementitious coating system with base coat of Sika Top & Seal -107 @ 1.50 Kg/Sqm glass fibre reinforcement Sika Fab-I and top coat with Sika Seal-107@ 1.50 Kg/Sqm or equivalent of Forsoc or pidilite. (Step-III) M&L 15 mm thick cement plaster on side and base slab of sunken part in cement mortar 1:3 mixed with appropriate integral water proofing compound with Sika Plastocree plus as specified. (Step-IV)M&L applying evenly a tack coat of industrial bitumen 85/25 @ 1.20 Kg/Sqm on plastered surface of sunken sides & base.Note:All debris obtained from site will be thrown away out side Def Land by contractor at his own expense.

M&L for Cement concrete 1:5:10 type E-2 using 40mm graded crushed stone aggregate as in sunken part of slab complete all as specified and directed.

M&L for Providing 25 mm thick, cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate in flooring in sunken slab as directed

S&F in repair 25mm dia stainless steel curtain rod of 304 grade for door & windows incl one pair of SS Bracket and steel cover for each rod cut to size and fixed in position complete all as specified and directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) Area not exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) Area exc 1.5 Sqm but n exc 4.00 Sqm each complete all as specified and directed.

Dismantling boarding any desccription fixed in any position with nails or any other means complete all as specified and directed

S&F factory made single extruded WPC (WOOD POLYMER COMPOSITE) solid door/window/ceosetory window and other frame/chowkhat of size 50x100mm comprising of virgin PVC polymer of K value 58 to 60 (suspension grade calcium carbonate and natural fibre (wood powder/rice husk/wheat husk and non toxic additives (maximum toxicity index of 12 for 100 grms complete all as specified and directed.

Providing and fixing factory made single extruded WPC wod polymer composite and decorative type flush door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 suspension grade calcium carbonate and natural fibre (wood powder/rice husk/wheat husk and non toxic additives (maximum toxicity index of 12 for 100 grms complete all as specified and directed.

S&F 125x60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate etc complete all as specified and directed.

S&F 105x60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate etc complete all as specified and directed.

M&L PCC (1:2:4) type B-1, using 20mm graded crushed stone aggregate as in bed block and filling in door frames complete all as specified and directed.

S&F 35 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F for 2nd class hard wood 35mm thick factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc., sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), supplied and fitted to chowkats complete all as specified and directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 150mm stainless steel handle of ISI marked complete all as specified and directed.

S&F 200mm stainless steel tower bolts of ISI marked complete all as specified and directed.

S&F 250mm stainless steel sliding door bolt with hasp & staple (bolt type) of ISI marked complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F 100 mm long butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed

M&L MS Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Providing and fixing factory made uPVC white colour sliding window three track area n exc 2.00 Sqm Each made of extruded profiles with wall thickness of 2.3mm(+ 0.2 mm). Window profile with hollow section with multi chamber. Frame (88 mm x 52 mm),sliding sash (42 mm x 67 mm ).Sliding mesh Sash (42 mm x 57 mm) Slide interlock (One vertical length in each shutters )(45.5 mmx 28 mm ),Glazing bead (24.5 mm x 16 mm) will be mitered cut and fusion welded at all corners,including railing of holes for fixing hardware and drainage of water etc. making arrangement for fising of hardware.EPDM gasket 1.2 + 0.2mm thick galvanized steel frame (30mmx18 mm) 2 No.s ,sliding sash(30 mm x 18 mm),sliding mesh sash (26 mmx 10 mm) profile to be inserted in required profile ,frame will be fixed to wall with 8 mmx100 mm long fasteners.HardwareTouch lock of zinc alloyed (white powder coated), steel roller system ,stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and required accessories, complete all as specified and directed. (Note:-The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.)

Providing and fixing factory made uPVC white colour sliding window three track area exc 2.00 Sqm Each made of extruded profiles with wall thickness of 2.3mm(+ 0.2 mm). Window profile with hollow section with multi chamber.Frame (88 mm x 52 mm),sliding sash (42 mm x 67 mm ).Sliding mesh Sash (42 mm x 57 mm) Slide interlock (One vertical length in each shutters )(45.5 mmx 28 mm ),Glazing bead (24.5 mm x 16 mm) will be mitered cut and fusion welded at all corners,including railing of holes for fixing hardware and drainage of water etc. making arrangement for fising of hardware.EPDM gasket 1.2 + 0.2mm thick galvanized steel frame (30mmx18 mm) 2 No.s ,sliding sash(30 mm x 18 mm),sliding mesh sash (26 mmx 10 mm) profile to be inserted in required profile ,frame will be fixed to wall with 8 mmx100 mm long fasteners.HardwareTouch lock of zinc alloyed (white powder coated ),steel roller system ,stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and required accessories complete all as specified and directed. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories.Net opening will be measured for payment purpose.)

M&L for 4.8 mm thick sheet glass ordinary quality and glazing with beading n exc 0.5 sqm in each pane complete all as specified and as directed.

M&L for 4.8 mm thick frosted sheet glass ordinary quality and glazing with beading n exc 0.5 sqm in each pane complete all as specified and as directed.

S&F 140mm Floor door stopper of aluminium alloy body and tongue, with hard drawn steel spring complete all as specified and directed.

S&F 300mm, Mild Steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F Rolled MS Joist, channel, angle, or tee sections, fixed independently, without connection plate, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe 410 -W (Gde- E-250) quality A

M&L for Cutting holes into or through brick walls built in cement mortor superficial area n exc 150 sq cm and making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and as directed.

S&F in repair 150 mm X 100 mm Salt-glazed stoneware gully traps, square or round mouthed, tvpe 'P' and setting and jointing in cement mortar 1:1 complete all as specified and directed

S&F 18 mm thick celuka ply of single side prelam/Rigidlam colour of density - 575 to 600 Kg/CBM fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides, top and bottom and shelves inside the cabinets complete all as specified and directed.

S&F 12 mm thick celuka ply (PVC) of plain white colour fixed with epoxy coated screws, solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete all as specified and directed .

S&F auto closing hinges 35 mm of 0 crank (KH-001)OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete all as specified and directed.

S&F magnetic catcher of size 20 mm X 50 mm suitable for cupboard shutter complete all as specified and directed.

Supply only 75 mm dia oval shape brass handle fancy type polished bright finish complete all as specified and directed

S&F stainless steel 304 grade wire basket of different sizes for utensils with necessary fixing clips fixed in cupboards etc complete in all respect complete all as specified and directed .

S&F 40 mm width continuous (piano) hinges, mild steel, bright finish or electro-galvanised complete all as specified and directed .

Supply only Telescope basket (channel) 18/20 inch(45/50cm) length extruded MS galvanised over rollers of approved make complete all as specified and directed.

M&L for providing damp proof layer on all external walls upto cill level (outside & inside) in two coats of acrylic polymer coating consisting of 1 part of acrylic polymer liquid mixed with 2 parts of cementious powder applying @ 1.50 kg/ Sqm of mix per coat. Second coat should be applied after 4-6 hrs of first coat, 5 days curing is to be carried out to the surface before providing plastering. On dried plastered walls, apply single coat Penetrative cum film for internal walls that provides best in class solution to the problem like dampness and efflorescence complete all as specified and directed.

Chipping of unsound / weak concrete material of 25-50mm average thickness from slabs, beams, columns, chajjas etc with manual chisel and or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc and disposal of debris for all lead and lifts complete all as specified and directed.

M&L for cleaning of rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry complete and then applying inc antirust bonding coat of Epoxy bonding adhesive @ 2.20 Sqm/Kg of approved adhesive on chipped portion of RCC than and applying micro concreting M25 grade (Design mix) with pressure guniting machine on RCC members (columns, beams, slabs, chajjas etc) 25 mm thick (total thickness) including necessary form work complete all as specified and directed.

M&L for PCC 1:3:6 type C-1, (using 20 mm graded crushed stone agregate ) in surface channels complete all as specified and directed.

Demolition and breaking up 75/150mm dia in bore drain pipes (salt glazed ware, AC or Reinforced concrete) set in cement mortar in any description complete all as specified and directed.

M&L for concrete bed to drain pipes of 100 mm dia including packing under and completely surrounding pipes with concrete after they are laid and tested in cement concrete 1:4:8 type D-2 complete all as apecified and directed.

M&L for concrete bed to drain pipes of 150 mm dia including packing under and completely surrounding pipes with concrete after they are laid and tested in cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) complete all as apecified and directed.

M&L for Reinforced concrete pipes class NP-2 of 150 mm dia laid and jointed complete with collars complete all specified and directed.

Description all as per item No.130 above but of 100 mm dia complete all as specified and directed.

M&L for Cutting into existing manholes for removing existing branch drain, making good to pipe and rendering cutting out branch channel, and making good benchings for 150 mm bore pipe complete all as specified and directed.

S&F stainless steel peg set of 6 hooks complete all as specified and directed.

M & L for Plain, solid IInd class hardwood, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered ,put together with glue pinned at joints, supplied and fixed

M&L for preparing new plastered or unplastered surfaces of wall and applying two coats of exterior emulsion paint over a coat of not less than 01 mm thick wall care putty and including a coat of exterior wall primer complete all as specified and directed.

M&L for complete removal of existing treatment of old plastered or unplastered surfaces of wall and applying two coats of exterior emulsion paint over a coat of not less than 01 mm thick wall care putty and including a coat of exterior wall primer & complete removal of existing treatment surface complete all as specified and directed Note- (i) Exterior primer & acrylic emulsion paint to be applied on wall surface by using Airless spray technology with working pressure of 3300 PSI and capable of operating single spray gun with max material hose length of 30 mtr.The spray machine shouild be of reputed manufacturer with pro gaurd technology and capability of tracking pressure. (ii) Allow 6-8 hrs to dry the surface for painting of subsequent coat

INTERNAL ELECTRIC SUPPLY Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors,and making good disturbed portion / surface of wall/ floor/ ceiling etc by using cement mortar (1:4) including white / colour wash / distempering etc as required to match with the existing surfaces / location complete all as specified and as directed.

M&L for point wiring complete for One light/Fan/Exhaust Fan/Bell point controlled by one switch with PVC insulated and unsheathed FRLSH cable 1.5 Sqmm (nominal area) ISI marked, multi-stranded copper conductor single core including ISI marked 20 mm dia PVC conduit medium grade concealed in wall and heavy duty PVC conduit not less than 20 mm in roof / floor slab and ceiling, including modular GI sunken box with modular cover plate with frame of suitable size, including 1.5 Sqmm PVC, FRLSH cable insulated unsheathed copper earth wire to the common earth and connecting to earth dolly, including colour coding of cable shall be Phase-red, Neutral-black and Earth- green with all accessories complete all as specified and directed. Note :- In case of roof/ceiling, heavy duty PVC pipe shall be used without any extra cost

Description all as per item No.138 above but One light point controlled by 2 Nos two way switch complete all as specified and directed.

Description all as per item No. 138 above but One socket outlet point 6 Amp on independent board complete all as specified and directed.

Description all as per item No. 138 above but One socket outlet point 6 Amp on same board complete all as specified and directed.

M & L for point wiring with 2.5 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 volts grade multi stranded copper conductor single core cable drawn through and including non-metallic rigid PVC concealed conduit of adequate size with all fittings and accessories including modular GI sunken box with modular cover plate with frame of suitable size including one run of FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 2.5 Sqmm green in colour as earth continuity conductor connected to common earth dolly for 16 Amp socket on independent board complete all as specified and directed. .

Description all as per item No. 142 above but concealed point wiring with 4.0 Sqmm multi-stranded copper conductor PVC insulated, unsheathed (FRLSH) cable and 4 Sqmm multi-stranded copper conductor PVC insulated, unsheathed (FRLSH) cable, green colour as earth continuity wire for one AC socket point on independent board complete all as specified and directed.

S&F Modular Switch 1 way, 6A, 1 module complete all as specified and directed.

S&F Modular switch 2 way, 6A, 1 module complete all as specified and directed.

S&F Modular Switch 1 way 16A, 1 module complete all as specified and directed.

S&F Modular socket 6A, 2/3 pin combined 2 module complete all as specified and directed.

S&F Modular socket 16A, 2/3 pin combined 2 module complete all as specified and directed.

S&F Modular bell push flush type 6 A, 1 Module complete all as specified and directed.

S&F Modular fan regulator 120 W, 2 module complete all as specified and directed.

M&L for ceiling rose in polycarbonate 3 terminal brass flush type 6 Amps, 250 Volts, AC supply (ISI marked), fixed on wall & including 3 mm thick 75mm dia sunmica hylum laminated round sheet complete all as specified and directed.

S&F in replacement, bell Ding Dong type AC 230 Volts complete all as specified and directed.

Supply & Fixing Modular AC Box With 20A SP MCB,Plastic Enclosure & Unbreakable Heavy Duty With ISI AC Plug Top for AC complete all as specified and directed.

Taking down Old unserviceable sub main wiring any size complete all as specified and directed. .

M&L for sub main wiring with two runs of 4.00 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 Volts grade multistranded copper conductor single core copper conductor wire drawn through and including PVC concealed conduit of adequates size and fittings and accessories concealed in walls, floors and ceilings complete including one run of FRLSH PVC insulated & unsheathed single core multistranded copper conductor of size 4.0 Sqmm green in colour as earth continuity conductor connected to common earth dolly from main DB to Sub DB including cutting chases and making good in cement mortar (1:4) with all necessary surface finishes such as white / colour wash / distempering etc to match the existing surfaces complete all as specified. Note:- (i) Two runs of cable, one run of earth wire and one run of PVC non metallic conduit shall be measured as one run length. (ii) Cable required for connection to DBs and MCBs shall be deemed included in quoted rates. (iii) Earth wire shall run inside the conduit pipe.

M&L for sub main wiring with two runs of 6.00 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 Volts grade multistranded copper conductor single core drawn through and including PVC concealed conduit of adequates size and fittings and accessories concealed in walls, floors and ceilings complete including one run of FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 6.0 Sqmm green in colour as earth continuity conductor connected to common earth dolly from main DB to Sub DB including cutting chases and making good in cement mortar (1:4) with all necessary surface finishes such as white / colour wash / distempering etc to match the existing surfaces complete all as specified. Note:- (i) Two runs of cable, one run of earth wire and one run of PVC non metallic conduit shall be measured as one run length. (ii) Cable required for connection to DBs and MCBs shall be deemed included in quoted rates. (iii) Earth wire shall run inside the conduit pipe.

M&L for sub main wiring with two runs of 10.00 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 Volts grade multistranded copper conductor single core drawn through and including PVC concealed conduit of adequates size and fittings and accessories concealed in walls, floors and ceilings complete including one run of FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 10.0 Sqmm green in colour as earth continuity conductor connected to common earth dolly from main DB to Sub DB including cutting chases and making good in cement mortar (1:4) with all necessary surface finishes such as white / colour wash / distempering etc to match the existing surfaces complete all as specified. Note:- (i) Two runs of cable, one run of earth wire and one run of PVC non metallic conduit shall be measured as one run length. (ii) Cable required for connection to DBs and MCBs shall be deemed included in quoted rates. (iii) Earth wire shall run inside the conduit pipe.

Taking down unserviceable main switch, DB’s insulators, DB for MCB and board etc of any type and any capacity and further disposal including making good the disturbed surfaces in cement mortar (1:4) including applying white/colour wash / paint / distemper as required to match the existing surfaces complete all as specified and as directed.

S&F epoxy powder coated MCB distribution box double door TPN 4 way vertical type for MCBs alongwith provn of MCCB as incomer with common bus-bar at incoming end of outgoing MCCBs grouted / flush to wall including necessary cutting and making good disturbed surfaces in cement mortar (1:4) and applying white/colour wash / paint / distemper as required to match the existing surfaces complete all as specified and directed.

S & F of MCCB 4 Pole, 415 V, adjustable type thurmal magnitic ICS 100%, 125 Amps with breaking capacity 25 KA as per existing MCB suitable of size with connected assosieries etc. Conplete all as specified and as directed.

S&F epoxy powder coated MCB distribution box double door TPN 4 way horizontal type for MCBs alongwith provn of MCB as incomer with common bus-bar at incoming end of outgoing MCBs grouted / flush to wall including necessary cutting and making good disturbed surfaces in cement mortar (1:4) and applying white/colour wash / paint / distemper as required to match the existing surfaces complete all as specified and directed.

S&F MCB, TPN ,63 A, 415V 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning, complete all as specified.

S & F MCB SP 40 Amps, 230 Volts C curve 10 KA, including necessary connection complete all as specified and as directed.

Supply and fix epoxy powder coated MCB, DB, double door SPN 8 way for MCBs with common bus-bar at incoming end of outgoing MCBs grouted/ flush to wall all as directed.

S & F MCB SPN 32 Amps, 230 Volts 'c' curve10 KA, including necessary connection complete all as specified and as directed.

Supply and fixing MCB Single Pole (SP) C curve 10kA breaking capacity of 6 to 32 amps, 240 Volts in proper position all as specified and as directed.

S & F lamp holder PVC/ Polycarbonate type with 9 W Led Bulb back plate suitable for batten fittings complete all as specified and directed.

Taking down old unserviceable light fitting any type, complete all as specified and directed.

S&F LED batten Tube Light surface / wall mounted with specially designed powder coated aluminum housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired upto terminal block, power consumption <20W (4 feet 20 W) luminaire lumen >2000 lm, system efficiency of >120 lumens /W, with LED binning as per ANSI Bin C78.377A, photo biological safety report as per IEC624718 & electrical insulation class I, Ingress protection IP 20, colour rendering index CRI>80, temp range 0 to 450C, driver efficiency>85%, power factor>0.9, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50000 burning hrs (min) as per L70 criteria, two stages isolated constant current operated driver with range 150-270V AC and safety extra low voltage safe level <60V DC as per IEC standard with LM70 & LM80 certification. complete all as specified and directed.

S&F LED batten Tube Light surface / wall mounted with specially designed powder coated aluminum housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired upto terminal block, power consumption <10W (2 feet 10 W) luminaire lumen >1000 lm, system efficiency of >120 lumens /W, with LED binning as per ANSI Bin C78.377A, photo biological safety report as per IEC624718 & electrical insulation class I, Ingress protection IP 20, colour rendering index CRI>80, temp range 0 to 450C, driver efficiency>85%, power factor>0.9, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50000 burning hrs (min) as per L70 criteria, two stages isolated constant current operated driver with range 150-270V AC and safety extra low voltage safe level <60V DC as per IEC standard with LM70 & LM80 certification. complete all as specified and directed.

Supply and fixing inverter batten with square profile and polycarbonate channel lithium ion 1 battery with charging time 08hrs-100hrs and backup time up to 4 hrs indoor luminaire batten for wall / ceiling mounting box type energy efficient saving led batten light 20 watt including twin twisted copper conductor flexible wire from ceiling rose to connected complete all as specified and directed

S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.

Supply and fixing exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers including testing complete all as specified.

Supply and fixing exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250mm including testing complete all as specified.

Taking down fan, sealing cable end,dismantling blades and removing fan and blades to MES store complete all as specified.

Supply and fixing ceiling fans complete with blades, down rods, and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

Supply and fixing electric water heater, stoarge type made of ultra thick super cold rolled steel plates, feroglass dry powder coat-ing technology inner tank and heating element heavy duty mag-nesium anode rod with steel core to protect enamelled tank from rust and corrosion 2 KW Capacity, 230 Volt, 1 Phase AC, 50 Hz, 25 Ltrs, BEE 5 Star, Energy saving high density PUF insulation, glass coated heating performance and resistance to oxidation and carbonation at high tempratures rated complete with all accessories such as safety valve, thermostat, NRV, connection piece and writing MES no. in black synthetic enemael paint/engraving tool etc complete all as specified & directed.

S & F of chromium plated stop cock with brass spindle & with crutch or butterfly handle screwed down high pressure suitable for 15 mm bore GI tubing complete all as specified and directed.

Supply, installation, testing and commissioning of electric chimney including all clamps,nuts,bolts and fixing arrangement complete all as specified and directed with following specification :- (a) Motor : 240W (b) Switch : Touch screen Panel (Front and back toughen glass) (c) Suction : 1500 cubic mtr/hr, size : 900 x 600 x 480 mm (d) Type: Ductless,Curved glass, Wall mounted, Heat Auto-Clean Chamber. (e) Light : 1.5W x 1 LED lamp (f) Noise level : < 59 db . (g)Heat Auto-Clean Technology, Baffle Filter.

Taking down existing earthing of any description and M&L for new earthing complete with galvanized steel plate electrode 600 mm x 600 mm x 6 mm thick, burried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to GI earthing wire 4mm dia size by means of GI bolts, nuts, check nuts and washers, earthing wire protected by GI pipe 20 mm bore (light grade) connected to main switch board or any other electrical equipment all as shown in electrical plate No. 3 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil, 20 mm bore medium grade GI pipe for watering, funnel with wire mesh, PCC (1:3:6) type C-1 in chamber of size not less than 300x300x300mm (internal diamentions) with cover made of RCC (1:2:4), type B-1, reinforced with 8 mm dia TMT bars @ 15 cm C/C both ways and angle iron 40X40X5mm frame etc duly painted with two coats of synthetic enamel paint over a coat of red oxided primer on exposed surfaces complete all as specified and directed by Engineer-in-Charge. Note:- The unit rate includes earthing wire and protection pipe upto maximum 7.5 metre from earth plate, earth point / test point.

GIAN ENGINEERS (BID ID -3259146)

M/s DHARAM VIR GHAI (BID ID -3263889)

Shri Siddhi Vinayak Builders (BID ID -3258420)