Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.2 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹40.8 L+₹93,415.74 (2.34%)Rejected-Finance MHN 284 DRIVER HILL VASCO DA GAMA GOA 403 802 | SOUTH GOA | GOA | 403802 | L2 | Rejected-Finance HIGHER BIDDER | |
| 3 | L3₹41.5 L+₹1.7 L (4.15%)Rejected-Finance 601 6TH FLOOR MANGOOR VALLEY NEAR GURUDWARA MANGOOR HILLL VASCO DA GAMA GOA 403 802 | SOUTH GOA | GOA | 403802 | L3 | Rejected-Finance HIGHER BIDDER | |
| 4 | L4₹43.7 L+₹3.9 L (9.72%)Rejected-Finance | L4 | Rejected-Finance HIGHER BIDDER | |
| 5 | L5₹46.4 L+₹6.5 L (16.3%)Rejected-Finance FLAT NO 4 VIRGINIA CO OP HOUSING SOCIETY AIR PORT ROAD CHICALIM VASCO DA GAMA GOA 403 711 | SOUTH GOA | GOA | 403711 | L5 | Rejected-Finance HIGHER BIDDER |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
29 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SHRI BIJENDRA SHARMA IDSE EE
GARRISON ENGINEER (NW) VASCO Opposite KV No.2, School, Shantinagar, Vasco-Da-Gama, Goa-403802
8463/22/E8
2022_MES_536869_1
8463/22/E8
Open Tender
Civil Works
Item Rate
180 days
VASCO
Class D Category a i b i
9 documents required · 9 mandatory
₹500
Yes
GE NW VASCO
₹98,000
Yes
13 Aug 2022
9 Jul 2022
1 Aug 2022
9 Jul 2022
29 Jul 2022
23 Jul 2022
9 Jul 2022 - 22 Jul 2022
Amount
REPAIR / MAINTENANCE TO CERTAIN B/R SERVICES INCLUDING JOINERY, PLUMBING AND OTHER ASSOCIATED MISCELLANEOUS WORKS FOR DCRA AREA AND VARUNAPURI-III UNDER AGE B/R – II
Dismantling/Taking out existing hessain base felt or any other existing water proofing treatment from roof including cement plaster and exposing the top surface of RCC slab including removing dust, dirt and washing the roof and removing the dismantled debris to a distance exceeding 200 m but not exceeding 3000m spread and levelled as directed by Engr-in -charge.
Providing 10mm thick plaster in CM (1:4) finished to even & smooth w/o using extra cement over gunniting surface.
M&L APP based polymeric membrane minimum veight 3kg/sqm and minimum 3mm thick reinforced with polyster non- woven fabric (wt. not less than 150gms/sqm) laid on primed surface by torch application method with minimum side overlap 100mm and 150mm as end lap over roofs after cleaning the surfaces properly with water and allowed to dry completely including priming surfaces for applying heavy treatment complete all as specified and as directed.
M&L complete removal of existing treatment and applying two coats of oil bound distemper over a coat of alkali resistant priming paint.
M&L for preparation of old plastered surface on ceiling and applying one coat of OBD.
M&L for preparation of old painted surfaces of wall and applying one coat of oil boud distemper.
Taking down cement plastering of any description on brick or stone wall etc including raking out joints hacking for key scrubbing down with water etc and removal of debries and depositing where directed.
M & L Rendering 5 mm thick in CM 1:3 on ceiling/ soffits of slab, including finishing the surface even and smooth without using extra cement all as specified.
Providing 10mm thick plaster in CM (1:6) finished to even & smooth w/o using extra cement.
Preparing newly plastered surfaces of wall and applying two coats of Oil bound distemper over a coat of alkali resistant primer.
Preparing newly plastered surfaces of wall and applying two coats Oil bound distemper in ceiling
M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint (Ist quality)
All as per item No.1.12 above but on steel surfaces
M&L rendering 10mm thick in CM 1:4 on brick work/ concrete surface to receive tiles
M&L screed bed or bedding layer of mortar 15mm thick to rceive floor tiles in cement plaster 1:4
S & F glazed ceramic tiles, coloured of size 300 x 200 x 7 mm thick with on vertical surfaces such as dado, skirting etc, set and jointed in neat cement slurry and pointed in white cement to match all as specified.
S&F Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match.
S&F Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match.
M & L Granite or marble (Baroda green) work (table rubbed and polished) 18-20mm in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.
Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.
M&L CPVC pipes SDR 11 Class 1 laid in trenches/walls outer dia 20mm dia including all fittings
M&L CPVC pipes SDR 11 Class 1 laid in trenches/walls outer dia 25mm dia including all fittings
Taking down steel tubing/CPVC Tubing & connections 15 mm bore and removing from the site.
Taking down steel tubing/CPVC Tubing & connections 20 mm bore and removing from the site.
S&F sheet glass ordinery quality, 4mm thick and glazing with oil putty/wooden beads in squars n exc 0.5 sqm each.
S&F aluminium alloy wire mesh 0.45mm nominal dia of wire and avg width of aperture 1.4mm cut to size and fixed to doors/window shutters and fixed with aluminium wire staples as ordered.
Taking down chowkat/frame with shutters n exc 1.5 Sqm (without taking off shutters from the frame)
All as in item No.1.26 above but exc 1.5 Sqm but n exc 4 Sqm each with shutters (without taking off shutters from the frame)
Taking down shutters only exc 1 Sqm n exc 2 Sqm Each
M&L for II nd class HW Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed
M&L for Factory made Plain framed, panelled shutter 35mm thick (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated.
M&L Factory Made IInd class hard wood and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, fixed in position as directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with head moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rain & bottom rail panelling of plain gap insert for top rail & bottom rail paneling of plain color PVC sheet to be fitted in the MS frame selded/ sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement suppling & fixing in the frame at site as per specification & drawing.
S&F mild steel work as in bands, straps, clamps, hold fasts and similar small articles conforming to Fe-290 (Gde E-165) complete all as specified and as directed.
M&L for providing plain cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in bed blocks for hold fasts, roof kerbs or mud stops, rounded or chamfered on edges etc, including weathering, slightly rounded or chamfered angles and throating as directed.
S&F aluminium anodised barrel tower bolts of extruded section 100mm long.
S&F aluminium anodised barrel tower bolts of extruded sectin 150mm long.
S&F extruded aluminium alloy, fabricated type handle, anodised 100mm long
S&F extruded aluminium alloy, fabricated type handle, anodised 150mm long
S&F Powder coated aluminium sliding door bolt 300 mm long with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy.
M&L for Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work,also facing, jointing and pointing to match existing work, complete
S & F in repair Hasp & staple, safety type of Alu Powder coated 125mm
S & F PVC connections, 450 mm long with brass CP check nuts suitable for connecting 15 mm dia pip[es, superior quality, fixed in repairs.
S&F in repair PVC (SWR) floor trap plain with grating including jointing with solvent cement 75mm.
S&F PVC waste pipe 32mm/40mm dia for wash basin and kitchen sink fixed in repairs.
S&F viterous china wash hand basin, white, flat back, size 600 x 480 mm white, excluding taps, waste pi, chain and plug and porcelain stopper but including brackets fixed in repairs
Supply & Fix WC of size 580 x 440 mm vitreous china squatting pan, Orissa pattern white with "P" or "S" trap front or back inlet and integrated foot rest including provn of lime concrete bedding etc fixed in repairs.
S & F PVC high level /low level flushing cistern, 10 Ltrs capacity including float valve, chain, PVC pipe including dismantling of old unserviceable flush tank in repair.
S & F 15mm dia bib taps standard of PTMT any colour high pressure screwed for iron pipe (min weight 90 gms) fixed in repairs.
Supply only Pillar tap of PTMT 15mm dia any colour high pressure screwed for iron/CPVC pipe fixed to new wash hand basin .
S&F in repairs Pillar taps of PTMT 15mm dia any colour high pressure screwed for iron pipe and fixed.
S &F 15mm stop valves PTMT any colour high pressure screwed for iron pipe (min weight 90 gms) fixed in repairs .
M&L waste coupling of PTMT 32mm / 40mm bore fixed in repairs
S & F PTMT grating dome 125 mm dia with waste holes in repairs
S & F 15mm dia angular stop cock standard of PTMT any colour high pressure screwed for iron pipe (min weight 90 gms) fixed in repairs.
S&F Shower rose with shower arm 195mm long of PTMT any colour, for fixing to CPVC/steel pipe of 15mm bore fixed in repairs complete all as specified.
M&L in repairs Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm
S&F aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperature 1.4 mm and fixed with aluminium wire staples to wooden / steel window / ventilator shutters fixed in repairs.
Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones.
M&L figured glass 3mm tick ordinary quality glazing with oil putty in squares not exc 0.5 Sqm in each pane.
M&L Painting to new wooden and wood based surfaces of any description not otherwise descrilbed over 10 cm width or girth . Two coats of synthetic enamel paint over a coat of pink primer including preparation of surfaces.
Dismantling existing water tank of 1000 Ltrs capacity and removing to store.
Dismantling existing water tank of 500 Ltrs capacity and removing to store.
S&F rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of 500 ltr capacity.
S&F rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of 1000 ltr capacity.
S&F SS curtain rails 19mm dia with brackets stop rollers etc fixed in repairs.
S&F in repair brass CP mixter 15mm dia for mixing hot & cold water screwed down for iron pipe/ PVC pipe
Cleaning of storage water tank of PVC/HDPE exc. 250 ltrs but n. exc 500 ltr capacity staged over RCC roof/floor slab or similar place inside /outside bldgs by removing float valves carefully, thoroughly cleaning the wall, floor and ceiling of the tanks, mouth of pipe etc, removing the dirty water, sludge and other depositions to a distance not exceeding 50 mtr to make the tank totally dirtfree and finally cleaning the water tank with fresh water till water becomes clear to entire satisfaction of Engineer-in-Charge and as specified in particular specification and refixing of float valves all as specified and directed
All as per item No. 1.69 above but n exc 250 Ltr (Loft tank).
All as per item No. 1.69 above but water tank of capacity exc 500 ltr but n. exc 1000 ltrs
S&F SS Butt hinges medium weight cold rolled 100mm size.
S &F in repair 200 Ltr capacity PVC loft tank of rectangular type suitable to fix in kitchen.
S& F PVC water tank covers circular type with suitable nut and bolts complete for water tanks of 500 to 2000 ltr capacity all as specified and as directed.
S&F PVC waste pipe 32mm/40mm dia for wash basin and kitchen sink fixed in repairs.
Treating and finishing the sunken portion of WC area not exceeding 1.2 Sqm each by providing 10mm thick rendering in cm 1:3 with and including water proofing compound and applying two coats of bitumen 85/25 @ 1.25 kg/sqm, providing necessary connection items suitable for WC, providing lime concrete and 1mm thick multiplus plastifelt over 20mm thick plain cement concrete 1:2:4 type B0 using 12.5 mm graded crushed trap stone aggregate complete all as directed.
All as per item No. 1.76 above but for bath / lobby with out any PVC connections/fitting, area exc 1.2 Sqm and n. exc 2 Sqm each.
S&F in repairs CP Jet spray/Health faucet complete all as specified
M&L in repairs stainless steel 1mm thick plate rack of size 600mm x 750mm including fixing in walls with suitable screws wooden plugs including all necessary arrangement etc all as specified and as directed.
S&F in repairs 20mm, 600mm long brass chromium plated towel rail all as specified and as directed.
M&L for PVC kitchen Cabinet (18 mm PVC one side prelaminated sheets of Rajshri Plastiwood) complete as directed by Engineer-in-Charge.
M&L for PVC kitchen Cabinet 18 mm PVC both side plain sheets of Rajshri Plastiwood complete as directed by Engineer-in-Charge.
S&F solid PVC frame (single rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note:- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)
REPAIR / MAINTENANCE OF SECURITY LIGHTS, CABLES AND OH LINES, SERVICES CONNECTION CABLE, JUNCTION BOX AT VARUNAPURI AND NOFRA UNDER AGE E/M - II OF GE (NW) VASCO
Taking down street light fitting for repairing/replacement/cleaning of any Wattage, completely removing dead insect,dust and refixing again to same location. Note:- Replacement of accessories like driver will be measured & paid separately.
Supply and fix in repair LED Driver unit for LED Street light Luminaire 72 W all as specified and directed.
Supply and fix in repair LED Driver unit for LED Street light Luminaire 60 W all as specified and directed.
Supply and fix in repair LED Driver unit for LED Street light Luminaire 90 W all as specified and directed.
Supply and fix in repair LED Driver unit for LED Street light Luminaire 120 W all as specified and directed.
Supply and fix in repair LED Driver unit for LED Flood light Luminaire 100 W all as specified and directed.
Supply and fix in repair LED Driver unit for LED Post top Luminaire 25 W all as specified and directed.
Supply and fix in repairs cable junction boxes IP 66/69 protected “halogen free and weather proof” suitable for out door type (with metric knockouts for cable entry) of size 155 x 210 x 92 mm mm mm incl necessary suitable size new backelite connecting terminals mounted on saddles suitable for 3 phase with neutral system - 04 Nos of suitable length and thickness and connecting the incoming & out going LT cable connections in the terminal block of junction box and fixing clamps made up of GI flat of size 32 x 6 mm of suitable length-02 Sets, incl GI nut and bolt and washers on poles complete all as directed.
Taking out old concrete poles of 9M long embedded in concrete unto bottom of foundation and Supply & Erect Prestressed concrete pole, 9 m long, 102 x 152 mm at top and 102 x 289 mm at bottom, class-10, erected in position all as directed complete
Taking out old concrete poles of 11M long embedded in concrete unto bottom of foundation and Supply & Erect Prestressed concrete pole, 11 m long, 152 x 152 mm at top and 152 x 260 mm at bottom, class-9, erected in position all as directed complete
PCC 1:4:8 type D-2 using 40 mm graded stone aggregate including use and waste of form work of concrete for pole, pathway and stay foundation.
PCC 1:3:6 type C-1 using 20 mm graded stone aggregate including use and waste of form work for pole coping.
Taking down/Dismantling insulators carefully any type, any size
S & F in repair Pin type porcelian vitreous brown or white insulator to suitable for 1100 Volt working pressure of size 100 mm height, 65 mm dia including one galvanised mild steel spindle, two galvanised iron washer and one GI nut complete including dismantling existing old insulator from position.
S & F in repair shackle type porcelian vitreous brown or white 1100 Voltof size, 115 mm dia and 100mm height including GI strap of size of 31 X 5 mm insulator bolt of 14mm dia, nuts and washers for working pressure 1100 V complete incuding dismantling existing old insulator from position.
Taking down carefully aluminium conductor of any size from LT OH Lines after unbinding from insulators for replacement of multijointed / undersize conductors.
M&L for providing OH ACSR conductor of size 6/1 x 2.59 Sqmm all as specified and directed incl stringing through existing RCC poles, fixing in insulators, jumpers with polythene pipe, aluminium binding wire etc complete.
Dismantling of MS cross arms bracing support clamps nuts bolts and washers etc and M&L for cross arms channel, bracing, support, clamps etc fabricated structured steel, sections, including nuts, bolts, washers etc and cutting to required length beat to any shape drilling holes, fixed on poles all as specified and directed incl painting with 2 coats of aluminum paint over a coat of red oxide primer after preparation of surfaces.
Taking out LT UG cable from any type of soil Cable under ground upto 16 Sqmm 4 core
M & L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of cross sectional area 16 Sqmm 4 core complete all as specified and directed.
M & L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of cross sectional area 10 Sqmm 2 core complete all as specified and directed.
M & L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of cross sectional area 6 Sqmm 2 core complete all as specified and directed.
Excavation in trenches n.exc 1.5 m deep and n.exc 1.5 m wide and getting it out in hard dense soil for erection of pole.
All as per Item No. 2.23 above but in soft disintegreted rock/ laterite rock
Returning filling in excavated earth work including spreading, levelling, watering and well ramming in layers n.exc 25cm thick in any strata
Removing excavated soil to a distance n.exc 50m, depositing where directed at a level n.exc 1.5M above the starting point
Supply and laying of DWC pipe IS-16205 Part II, size inner dia 32 mm, outter dia 40 mm for cable production in wall / under ground laying of UG Cables.
Supply and Fixing of DWC pipe SNAP-FIT COUPLER IS-16205 Part II size inner dia 32 mm, outter dia 40 mm for connection of DWC Pipe in wall /under ground laying of DWC Pipe.
Taking down street light fitting or flood light, garden lights fitting any type and rating from poles, walls or any other indicated situation/ location including removal of GI bracket pipe as directed, after disconnecting electrically and unservicable fittings and accessories from site.
Fixing only of Integral LED Flood light luminaire upto 120 W and connecting up with twin core twisted flexible aluminium with cable connector complete all as directed. Note:- Item should be supplied under schedule B store free for fixing
Fixing only Integral LED street light luminaire upto 120 Watt and connecting up with twin core twisted flexible aluminium with cable connector complete all as directed. Note:- Item should be supplied under schedule B store free for fixing
Supply and fix Analogue type timer switch (Daily time switch) including power contactor 25 Amps, three phase, 415 volts and MCB TPN 32 Amps 10 KA 'C' series with arrangement of auto/mannual control switch duly prewired and bypass arrangement and including sheet metal enclosure of 2 mm thick CRCA sheet of adequate size with powder coated for enclosing the time switch with necessary fixing arrangements on PCC pole/wall surface by providing MS flat iron clamps 32x6 mm and nuts,bolts, washers etc complete all as specified and directed by Engineer-in-Charge.
Supply and fix in repair Intergral LED Flood Light Luminaire 100 W clamp type Comprises a pressure dicast aluminium housing with LEDs and driver. Heat resistant toughened glass with frame suitably gasketed for IP 65 Class I protection including all accessories, all as specified and directed.
Supply & Fix in repair 25W LED Smart Integrated Solar Street Light with Built in Mono Crystalline Panel, Lithium Ferro Phospate (LiFeP0 4 ) Battery, MPPT Charge Controller and PIR Sensor with Colour Temperature 6000-6500K. Solar Standalone Streetlight System of 2 days backup consists of Solar LED Luminiare, Solar Panel, Solar maintenence Free Battery and 6 Mtr GI Pole complete all as specified and direceted. Note :- Cost of suitable concrete foundation for fixing the street light pole shall be deemed to be include in the quoted rate.
S & F in repair GI pipe medium grade 40 mm dia, 1.2 m in length, bent to shape for fixing street light fitting fixed with necessary clamps,bolts nuts etc., complete.
Supply and fix 2.5 Sqmm three core PVC insulated and PVC sheathed multistranded copper conductor cable 1100 Volt grade draw from junction box / OH ACSR to street light fitting complete all as specified and as directed.
M&L preparation of old cement coated surface, cleaning the surface of the RCC pole (LT) above the ground level incl coping area with 2 coats of ACC exterior Emulsion paint over a coat of cement primer after preparation of surface including 12 cm black paint around the pole numbers/letters in white columns all as directed.
Re- Stringing only existing LT OH line including dismantling of existing old binding wire complete. Note:- (a) Restringing of 2 wires shall be measured as one RM (b) Supply only binding wire shall be measured and paid separately.
Surface dressing for removing of creepers on stay wires/poles not exc 15cm deep of soft and loose soil.
Cutting and trimming of tree branches 3 mtr all around of any size obstructing lumination of street light and touching LT / HT Over head line incl removing trimmed tree branches.
S & F in repair of Integral LED street light luminaire 90 W LED street light with pressure die-cast housing and toughened glass and individual LEDs with secondary lens optics for City Road application with IP66 ingress protection and impact resistance of IK07. 5kV inbuilt and 10kV external surge protection with Top opening driver cover for easy maintenance and accessories.
Supply and fixing in repiar 40 watt integral pole mounted LED post top made in cast aluminium with decorative opal polycarbonate diffuser and IP 65 protection and accessories all as directed.
Super Construction
SHIVANI ENTERPRISES
JINTECH
M/S jvsr constructions
M/S G.N.POWAR
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .