Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
| 2 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
| 3 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
Tender Value
₹28.4 L
EMD Value
₹56,856
Closing Date
20 Oct 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer (E)
BSNL Electrical Division Port Blair.
Providing Electrical installation, Distribution Panel, SITC of 4x7 TR Precision AC and 2 nos 3 TR Ductable AC units for proposed MINI DATA CENTRE in MSC Equipment room at New TE PORT BLAIR. SH- Electrical works
2023_BSNL_170385_1
10/CEE/TNEZ/CH/2023-24
Open Tender
Electrical Works
Item Rate
60 days
New TE Port Blair
Please refer Tender documents.
2 documents required · 2 mandatory
₹590
Yes
Accounts Officer Cash
₹56,856
Yes
21 Oct 2023
10 Oct 2023
21 Oct 2023
10 Oct 2023
20 Oct 2023
10 Oct 2023
SH-I ELECTRIFICATION, DISTRIBUTION PANEL
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI/PVC box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. a) Group C
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. a) 2X1.5sq.mm + 1X 1.5 sq. mm earth wire
b) 2X 2.5 sq.mm + 1 X 2.5 sq. mm earth wire
c) 2X4sq.mm+ 1X4 sq. mm earth wire
d) 4X4sq.mm+ 2X4 sq. mm earth wire
e) 4 X 16 sq. mm + 2 X 6 sq. mm earth wire
f) 4 X 25 sq. mm + 2 X 10 sq. mm earth wire
Supplying and drawing following size PVC insulated copper conductor single core cable in the existing conduit/trunk box/panel including connections etc as required (a) 4 X 35 sq. mm + 2 X 10 sq. mm earth wire
Supplying & fixing of following size PVC conduit/ casing & capping with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required a) 20 mm size PVC conduit
b) Supplying & fixing 25 mm size PVC conduit
c) Supplying & fixing 32 mm size PVC conduit
Supplying and Fixing of following size uPVC trunk box (cable management) system on the surface of wall / floor / ceiling / on the the existing cable tray with necessary connected accessories like bends, Elbows, Tee, etc as required. [Make MK India / LK or any Similar Superior Make] (a) 50 mm x 50mm
b) 100 mm x 50mm
Supplying & fixing of 10W inverter recess/surface type LED round/square Luminaire suitable for working on 230V 50Hz AC supply directly on ceiling/wall, including connection with 1.5Sqmm FR PVC insulated, copper conductor, single core cable etc as reqd. [ M/s Crompton Greaves / M/s Havells or Similar superior make] (for emergency light)
Supplying & fixing of 4ft 20W LED fitting with LED tube, driver suitable for working on 230V 50Hz AC supply directly on ceiling/wall including connection with 1.5Sqmm FR PVC insulated, copper conductor, single core cable etc as reqd. [ M/s Crompton Greaves, M/s Havells or superior make]
Supplying & fixing of following modular switches, sockets, telephone jack with shutter, modular PVC box, Modular plate, RJ 45 computer jack, switch blanking plate, MCB suitable of working on 230V, Single phase AC supply etc, as reqd (Modular switches M/s ROMA or superior make) a) 5/6 A 1 way modular switch
Supplying & fixing 6A 3pin Modular socket
Supplying & fixing 15/16 A 1 way Modular switch
Supplying & fixing 16A 6pin Modular socket out let
Supplying and fixing following size modular PVC box on existing wall/table etc. as required. (Legrand / Crabtree or any Similar Superior Make) (a) 3 Module (100mmX75mm)
b) 4 Module (125mmx75mm)
c) 6 Module (200mmx75mm)
d) 12 Module (200 mmX150 mm)
Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. ( Legrand / Crabtree or any Similar Superior Make ) (a) 3 Module (100mmX75mm)
b) 4 Module (125mmx75mm)
c) 6 Module
d) 12 Module
Supplying and fixing of following ways surface/ recess mounting, VERTICAL type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required a) 4 way, 4+12 modules double door
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (a) 4 way (4 + 12), Double door
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (a) 6 Way SPN Double door
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required (a) Single pole
b) Double Pole
c) Triple Pole
Supplying and fixing 63 A rating 4 Pole, 415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required
S/F following electrical accessories in the existing Emergency light MCB DB i/c modification in the door, interconnection etc., as required. (a) RED & GREEN LED indicator lamps (Vaishno -22.5mm/Rishab/L&T or ss make)
b) AC to AC MXO 22E (2 NO+2NC) control relay (Auxillary contactors). (M/s L&T - Cat No.CS94020 or Schneider Electric / Siemens/ Lakshmi(LECS) make)
c) Push Button (L&T 22.5mm or ss make)
Supplying and fixing 16SWG MS sheet including cutting to the required size, powder coated painting to match with existing panels/DB, providing necessary hardware etc as required
Supplying and Laying of Electrical insulating 2mm thick Rubber Mat in accordance with IS 15652/2006 (for 3.3KV) etc as required.S/L Electrical insulating 2mm thick Rubber Mat in accordance with IS 15652/2006 (for 3.3KV) etc as required.
Supplying and Fixing 4.5Kgs Co2 fire extinguisher with initial charge, mounting bracket & date of filling clearly mentioned, sign writing etc as required. [Note: 1) Firm shall produce test certificate from the department of explosives. 2) Make:- Any ISI Marked]
Providing.& Fixing of 2kg capacity clean agent fire extinguisher with wall hook built in one piece with body bottom. mild steel body of 1.6mm thickness with pressure gauge, refillable device & safety release device, CE Certified brass valve suitable for B & C Classes of fire complete with charge of DuPont FE 36 (HFC-236fa). The extinguisher shall have pressure gauge for indicating inside pressure with opening & closing lever of squeeze grip type with tamper proof seal. The extinguisher shall be externally epoxy powder coated with the required shade complete with wall bracket. The Fire Extinguisher shall be as per IS:15683 - 2006 with ISI mark (Safex or Similar Superior make) Note: Firm shall produce test certificate from the department of explosives (a) 2 kg capacity
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
Providing and fixing of 6 SWG wire on surface or recess for loop earthing etc, as reqd.
Supplying of 3 1/2 Core 185 Sqmm PVC insulated, PVC sheathed/XLPE, Aluminium Conductor Armoured, UG cable of 1.1KV grade including transportation etc., as required [ISI Mark]
Laying of following size PVC insulated, PVC sheathed/XLPE, Aluminium Conductor Armoured, UG cable of 1.1KV grade on surface of wall etc., as required. [ISI Mark](a) Above 95 sqmm and upto 185 sqmm (clamped with 25/40x3mm MS flat clamp)
Laying of following size PVC insulated, PVC sheathed/XLPE, Aluminium Conductor Armoured, UG cable of 1.1KV grade on existing Tray etc., as required. [ISI Mark] (a) Above 95 sqmm and upto 185 sqmm (clamped with 25/40x3mm MS flat clamp)
Laying of following size PVC insulated, PVC sheathed/XLPE, Aluminium Conductor Armoured, UG cable of 1.1KV grade in existing masonry open duct etc., as required. [ISI Mark] (a) Above 95 sqmm and upto 185 sqmm
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. (a) 3½ X 185 sq. mm (57mm)
Supply, fabrication and erection of GI Cable tray with suitable size GI angle Iron, GI Flats, wall supports/ suspenders from ceiling etc including applying primer and two coats of enamel paint etc as required
SITC of Floor Mounting Distribution Panel, made up of 16G CRCA sheet, complying to latest IE rules suitable for extendable type, panel shall be powder coated with approved colour & shade matching to the existing panel, panel shall have clear sign writing with fluorescent paint including supply & fixing the following switches & accessories, interconnection with suitable bus bar links for the incoming & outgoing & suitable size removable type gland plate at the bottom of sheet for outgoing cable, including earthing the switches, providing C channel in bottom of size 100mmx50mmx5mm etc. as reqd. etc. as reqd. Details of switch gears & other accessories to be provided are listed below. a] 4 strip 250 Amp AL Bus Bar with Insulated Supports-1Set b] 250A, 4pole, MCCB with 36KA Breaking Capacity, Thermal release range of 200 to 250 Amps, With extended rotary operating Mechanical Handle 2 Nos (Make: L&T DU250 / Schindler/ Siemens or superior make and model) c] ACC Spreader terminals DU250A - 4 Pole - 2 Set (Set of 8 Per Each MCCB) d] Mechanical Interlock [L&T Cat No.CM99958TOOOO or Schneider Electric / Siemens / HPL / Havells or superior make and model)] - Total 2 Lock - 1 No Key e] 125 A, 4 pole, MCCB with 30KA Breaking Capacity, Thermal release range of 80 to 100 Amps, With extended rotary operating Mechanical Handle - 3 Nos (Make: L&T DU125 / Schindler/ Siemens or any equivalent approved make and model) f] ACC Spreader terminals DU125A - 4 Pole - 3 Sets (Set of 8 Per Each MCCB) g] 100 A, 4 pole, MCCB with 30KA Breaking Capacity, Thermal release range of 63 to 80 Amps, With extended rotary operating Mechanical Handle - 3 Nos (Make: L&T DU100 / Schindler/ Siemens or any equivalent approved make and model) h] ACC Spreader terminals DU100A - 4 Pole - 3 Sets (Set of 8 Per Each MCCB) i] Digital Multi Function Meter Cl 1.0 for reading V, A, F, kW, kWh along with suitable ratio CT's - 1 Set (M/s L&T 4400 or ss make) j] RYB indicating lamps with fuses and toggle switches - 1 set Note: The panel drawing shall be got approved by the Engineer in charge before fabrication. (All Items shall be BSNL approved make)
SH II-Electrical works for 2x3 TR Ductable AC Units
P/F 25mm dia UPVC heavy guage pipe for draining condensate water from evaporator unit including fixing on surface/recess with necessary accessories like bends, couplers, Tees, etc as required
S/F of analog 24 Hrs, 10A, rating, Time switch (1 No) for controlling 2 Nos A/C Units, with ncessary MS enclosure of suitable size AC3, 18A rated 3 pole contactor ( 2 Nos), wiring for interconnection, complete as reqd.
SH-III ACS (ACCESS CONTROL SYSTEM)
SITC of Desktop PC with Intel core i7 processor, 16 GB DDR4 RAM, 1 TB storage, 19" monitor, keyboard, mouse, Windows 11 operating system including installation, testing, commissioning etc., as reqd.
Biometric Fingerprint Reader: Supply Installation Testing and Commissioning of IP based Biometric finger reader cum controller having inbuilt smartcard readers with pin pad complete power supply unit etc. as per the detailed technical specification attached. The reader log data should be transferred to server on real time basis. The reader should be capable of both enrolment purpose and access control purpose with minimum 500 users capacity. The access controller is to be integrated with the fire alarm system for operation.
SMART CARD READERS: SITC of Smart Card readers with stainless steel base plate with base box i/c door interface module (if applicable) etc as required. The read range shall be up to 4-9cm for Doors. The reader log data should be transferred to server on real time basis.
SMART CARDS: SITC of Smart Cards, double side card holder and lanyard including printing on lanyard etc as required.
EM‐LOCK FOR DOORS: SITC of Electromagnetic Locks of 600 lbs holding force suitable for operating with 12/24V DC power supply i/c providing Green /Red LED indication with built-in door monitor status as per the specification. (a) For single leaf doors
(b) For double leaf doors
SITC of Emergency Break Glass unit inside the room for Doors etc as required.
SITC of Master switch for opening all access control doors in case of Emergency.
MAGNETIC CONTACT: SITC of Surface/flush mounted type Magnetic Contact suitable for 5 million cycle operation etc as required.
SITC of standalone 5 KVA, 1 phase, on line UPS for all the systems with a backup of upto 20 minutes i/c providing bypass arrangement etc as required.
S/L of 2‐Core, 1 sq. mm copper conductor Shielded FRLS unarmoured cable for Communication as required.
S/L 4-C x 1.0 Sq mm, copper conductor,Twisted Pair, multi strand, ATC shielded, armoured cable in recess/on surface/ cable tray (Gray Color) etc as required.
Access Management software Including Attendance Software as per the specification. (Suplied Honeywell make, model WIN-PAK- WPX46, or SS)
SH-IV IP CCTV Surveillance system
Supplying and Fixing of 4MP IR Fixed Dome Network Camera, PoE based with 1/2.8" Image Sensor, 2.8mm fixed lens, IR range up to 30 mtrs, support on board card slot up to 128GB, DWDR, video compression H.265/H.264 etc as required.
SITC , of 8 channel Network video recorder with H.264 Compression format or higher and Including the hard disk for recording @ D1 resolution, 15FPS for 60 days etc as per specification attached. vendor to provide minimum 6TB hard disk .The NVR Should have 8 channel POE port to power the camera.
SITC 32" diagonal, 1920 x 1080 pixels LED monitoring screen with all mounting bracket, connection chord wire,remote control , with suitable ports etc as per the specification attached.
SITC of Layer II managed 24 ports POE switch with RJ45 ports 10/1000 mbps ports and two uplink gigabit ports etc as required.
SITC of 8 U Wall mounted Rack (Powder Coated /19"DIN, Mounting Hardware / OR / Pk-10, Round Pin 5/15A, Inlet Plug type 16A Indian Round Pin) with all accessories
CAT 6 cable Supply and laying of Cat -6 cable fitted with strain relief boots on either sides to connect camera to NVR
Supplying and fixing following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. a) 20mm
SH-V AUTOMATIC FIRE ALARM SYSTEM
Supplying, installation, testing and commissioning of microprocessor based main control panel with following number of zones and indicating panel , suitable to operate on 230V,50 HZ AC supply complies with UL and NEPA with standby battery backup for DC supply, built in charger, powder coated finish, FIRE/FAULT status with LED indications with RS 485 communication port, with MODBUS facility for Building Management System integration, TCP/IP facility for networking , zone isolation facility, facility to connect Public Address System (PA) through RS-485 Communication, etc as required. (a) 8 Zone Panel
Supplying, installation, testing & commissioning of smoke detector with built-in LED and mounting base complete with all connections etc. as required
Supplying, installation, testing & commissioning of manual call boxes, compatible with the main control panel of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.
Supplying, installation, testing & commissioning response indicator on surface/recess MS box having two LEDs metallic cover complete with all connections etc. as required.
Supplying, installation, testing & commissioning electronic sounder(3w), compatible with the main control panel mounted in M.S. box (16 SWG) etc. complete as required.
Supplying & laying of 2x1.5 sq.mm. FRLS armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required.
SITC of single sided 3W Green LED Exit signage with "Man Running Right / Left" sign with arrow of standard/ suitable size with LED lamp, with 2 Hrs battery backup, i/c battery, charger, accessories and giving connections etc as required.(M/s Bajaj/Prolite /Similar superior make)
SH-VI WATER LEAKAGE DETECTION SYSTEM
Supply, installation, testing & commissioning of 2 Zone Water Leak detection system control Panel with LCD Display, Power supply, battery backup, monitor up to 2,000 feet (609m) of sensing cable Easy integration with existing systems via Modbus, BACnet, SMTP, SNMP and/or dry contact outputs. (make:-Saini / C Systems / Telenet or SS make)
Supply, laying, testing & commissioning Water leak detection cable sensor with Non-conductive polymers used in the leak detection cable's construction. Pressure on the sensing cable should not create a false alarm, with Pre Connected Connectors, Dries quickly without external drying devices and Complete - Plenum rated
SITC of hooter cum strobe suitable for the above water leakage detection panel etc as required.
SH-VII RODENT REPELLANT SYSTEM
SITC of Rodent repellent system Panel with auto tuning capability of connecting 12 Satellites per console in individual cable to transducer, LCD display, with on-board controls, including all accessories such as stand / rack etc., as required.
SITC of Transducer Satellite Stations, capable of Emitting Ultrasonic sound of frequencies 20 Khz and higher, including all accessories complete as per relevant standards etc., as required.
Supply, laying & fixing of 2 core flexible cable of suitable size for connectivity between the transducers and the master console suitable for rodent repellant system in suitable dia PVC Conduit, couplers,bends etc complete as required.
SH-VIII: Electrical panel and associated works for Precision AC
Providing and fixing of 6 SWG wire on surface or recess for loop earthing etc, as reqd.
Supplying of following size PVC insulated, PVC sheathed/XLPE, Aluminium Conductor Armoured, UG cable of 1.1KV grade including transportation etc., as required. [ISI Marked] (a) 4 Core 16 Sqmm
b) 3 1/2 Core 70 Sqmm
Laying of following size PVC insulated, PVC sheathed/XLPE, Aluminium Conductor Armoured, UG cable of 1.1KV grade on wall surface etc., as required. [ISI Mark] (a) Upto 35 sq. mm (clamped with 1mm thick saddle)
b) Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)
Laying of following size PVC insulated, PVC sheathed/XLPE, Aluminium Conductor Armoured, UG cable of 1.1KV grade on existing cable Tray etc., as required. [ISI Mark] (a) Upto 35 sq. mm (clamped with 1mm thick saddle)
b) Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)
Laying of following size PVC insulated, PVC sheathed/XLPE, Aluminium Conductor Armoured, UG cable of 1.1KV grade in existing masonry open duct etc., as required. [ISI Mark] (a) Upto 35 sqmm
b) Above 35 sq. mm and upto 95 sq. mm
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. (a) 4 Core 16 sq. mm (28mm)
b) 3 1/2 Core 70 Sqmm (38 mm)
SITC of Wall Mounting Distribution Panel, made up of 16G CRCA sheet, complying to latest IE rules suitable for extendable type, panel shall be powder coated with approved colour & shade matching to the existing panel, panel shall have clear sign writing with fluorescent paint including supply & fixing the following switches & accessories, interconnection with suitable bus bar links for the incoming & outgoing & suitable size removable type gland plate at the bottom of sheet for outgoing cable, including earthing the switches, etc. as reqd. Details of switch gears & other accessories to be provided are listed below. SITC of Wall Mounting Distribution Panel, made up of 16G CRCA sheet, complying to latest IE rules suitable for extendable type, panel shall be powder coated with approved colour & shade matching to the existing panel, panel shall have clear sign writing with fluorescent paint including supply & fixing the following switches & accessories, interconnection with suitable bus bar links for the incoming & outgoing & suitable size removable type gland plate at the bottom of sheet for outgoing cable, including earthing the switches, etc. as reqd. Details of switch gears & other accessories to be provided are listed below. a] 4 strip 150 Amp AL Bus Bar with Insulated Supports-1Set b] 125A, 4pole, MCCB with 30KA Breaking Capacity, Thermal release range of 100 to 125 Amps, With extended rotary operating Mechanical Handle 2 Nos (Make: L&T DU125H / Schindler/ Siemens or superior make and model) c] ACC Spreader terminals 125A - 4 Pole - 2 Set (Set of 8 Per Each MCCB) d] Mechanical Interlock [L&T Cat No.CM99958TOOOO or Schneider Electric / Siemens / HPL / Havells or superior make and model)] - Total 2 Lock - 1 No Key e] 100 A, 3 pole, MCCB with 30KA Breaking Capacity, Thermal release range of 40 to 50 Amps, With extended rotary operating Mechanical Handle - 6 Nos (Make: L&T DU100 / Schindler/ Siemens or any equivalent approved make and model) f] ACC Spreader terminals 100A - 3 Pole MCCB - 6 Sets (Set of 6 Per Each MCCB) g] Digital Multi Function Meter Cl 1.0 for reading V, A, F, kW, kWh along with suitable ratio CT's - 1 Set (M/s L&T 4400 or ss make) j] RYB indicating lamps with fuses and toggle switches - 1 set Note: The panel drawing shall be got approved by the Engineer in charge before fabrication.(All Items shall be BSNL approved make) Note: The panel drawing shall be got approved by the Engineer in charge before fabrication.(All Items shall be BSNL approved make)
SAIDAPET ELECTRICALS
DANI ENGINEERS
stage.html
html • 0.02 MB
finance_186678.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .