Maintenance and repair works to the strong room at mettupalayam road new busstand in ward no.45 West Zone

Amount

Engaging the Labour (Mason I Clases) for Cleaning work the site incoding all cost as per the direction of departmental officer etc complete

2. Engaging the Labour (Cerpentar 1 Class) for Wood work the site incuding all cost as per the direction of departmental officer ete complete

Dismantling the existing damaged Floor Finish and dadooing walls in cement mortar with mosaic tiles,Glazed Tiles, Clay Tiles. Cuddapah Slab etc., as per the direction of departmental officers etc.. Complete

Dismantling the existing damaged Brick or stone masonry in cement mortar, wall under 3m high up to 70cm tk. etc., as per the direction of departmental officers etc., complete

Engaging the Labour (Fitter I Class) for existing damaged Solor panel Removing work the site incuding all cost as per the direction of departmental officer ete complete

Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9" X 4 3/8"X 2 3/4" including finishing. curing, etc., complete complying with standard specification-100CFT

Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P-Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc.complete as per standard specifications

Plastering with cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P-Sand)) 20mm thick in all floors including cost and conveyance of all materials to site and labour charges etc, complete complying with standard specifications (S.1.309)

Painting two coats for Interior surface with approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. (SL.No.394)

Painting with Ready Mixed Enamel Paint over the new wood works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification

Fabricating supplying and fixing of pre painted galvanium colour sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 10.47 mm thick 24 guage having width 1050 mm. The sheet should be G.L.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws.plastic washer. The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated, cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.

13. Paving the floor with Double charged Vitrified tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P-Sand)), 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work

Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm diametre brass chromium plated piller tape,32 mm diametre C.P. Waste union, 32 mm diametre P.V.C. waste pipe with rubber plug and chain, 15mm diametre G.M.wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basin in the wall in position with a pair of C.L. brackets with teak wood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc., complete complying with standard specifications

Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with 'P' trap or 'S' trap confirming to IS:2556-Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers.

Wiring with 2x1.5sq.mm. PVC insulated SC unsheathed FRL Scopper conductor cable oft 100V grade insuitable heavy gauge MSconduitpipe concealedinwall and ceiling with MS accessories with MS switch box inflush with wall with SAFTswitch with 3mmthick hylemsheet cover MS switch box with continuous earth wire connection ofl.5sq.mm copper wire and making good of the concealed portion for concealed light point/fan point (for electronic regulator)

Wiring with 2x4sq.mm PVC insulated SC unsheathed FRLS copper conductor cable of 1100Vgrade insuitable heavy gauge MS conduit pipe concealedin wall and ceiling with MS accessories inflush with wall with 150mmx100mmx75mm MS switch box concealed type with 3mmthick hylumsheet cover for15A 3pin flush type non interlocking CS plug with continuous earth wire connection of 4sq.mm copper wire and making good of the concealed portion for concealed power plug point

Supply and fixing of 4Feet LED 18W Fitting with LED 18W tube (HigherEnd) complete with conduit pipe suspension from the ceiling with PVC unsheathed FRLS copper leads from terminals to the fitting with tube

Supply and fixing of 1200mm (48") sweep Ac ceiling fan complete with stepped electronic 300W regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18")

Supply and fixing of 30W LED street light fitting with LED (Higher end) with 25 mm dia. Gl pipe (class B) with 1 no. 25 mm dia GI bend complete on the existing post/ on wall with PVC unsheathed FRLS copper leads with MS clamps and with painting.

Supply and run of 4 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade on 7/20 Gl bearer wire for service connection mains

Supply and fixing of 3 phase 32A aerial fuse unit for 3 Nos. 32A fuse units (500V) on suitable MS sheet covered with 6mm thick hylem sheet on suitable angle iron work the tapping pole with necessary clamps

Supply and fixing of 20A Flush type Wall Socket 1.00 32A DP MCB complete set for AC Plug in flush with wall with earth connection

Providing & fixing PVC RAIN WATER DOWNFALL PIPE of the following 110mm dia PVC Pipe with necessary T.W.Clamps Plugs, Shoes, Bemds, other clamps, screws nails etc., complete complying with standard specification. The rate is inclusive of cost of removable iron gratings of appropriate size. The size of Teak Wood plugs used is 150X25mm in front & 200x75mm in rear (wall side) with a depth of 110mm. The pipe is to be fixed by means of "U" clamps at the centre of pipes to be fixed.

Supply and fixing of playwood for windows closing work wood work the site including all cost as per the direction of deparmental officers etc., complete

Removal of Excavated excess earth away from the site to 5 KM including loading and transportation charges etc., complete as per standard specification for 1M3

RGR CONSTRUCTION (BID ID -1556900)