SPECIAL REPAIR REPLACEMENT TO THE BLDG NO P 01 AB P 01 GHF P 261 P 261 CS AND MINOR REPAIRS TO EXTERNAL AREA OF P 01 AT SI LINES UNDER GE BHOPAL

Amount

Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline

M&L for excavation in trenches n exc 1.5 m wide and n exc 1.5 m in depth for foundation, etc. or for shafts, wells , cesspits, manholes, pier holes etc n exc 10 sqm on plan and not 1.5 m depth and getting out hard/dense soil complete as directed by Engr in charge.

M&L for brick work with fly ash brick in CM 1:6 using fly ash bricks straight or curved on plan exc 6 m mean radius including demolition all as specified and directed.

M&L for providing cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in cills, seismic and other similar bands, plinth courses, copings, bed plates, bond stones, etc including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work including demolition of concrete in ground floors and pavings (un reinforced) nexc 15 cm thickness (below or above ground level) complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm thick in soft / loose soil complete all as specified and directed.

Removing excavated mtr from site n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed.

M&L for precast cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:4 complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base, foundation filling in mass concrete etc complete all as specified and directed.

M&L for PCC 1:3:6 type, C-2, 75 mm thick using 20mm graded aggregate as in plinth protection complete all as specified and directed.

M&L for screed bed or beding layer of mortar 15mm thick for laying floor finish in CM 1:6 complette all as specifed and directed

M&L for glazed ceramic tiles in vertical surfaces 350x250x7mm/ 450x350x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement to match and including 10mm thick on fair faces of brick work or concrete surface back coat to walll tile in CM 1:4 including demolition all as specified and directed.

M&L for vitrified glazed light shade tiles 8 to 10 mm thick (square/rectangular) polished, of any shade area of each tiles exc .18 sqm but not exceeding .36 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match and over laid screed bed or beding layer of mortar 15mm thick for laying floor finish in CM 1:6 including demolition old tiles all as specified and directed.

M&L for vitrified glazed light shade tiles 8 to 10 mm thick (square/rectangular) polished, area of each tiles exc .18 sqm but not exceeding .36 Sqmas in vertical surfaces such as skirting, risers to steps, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles and including 10mm thick on fair faces of brick work or concrete surface back coat to walll tile in CM 1:4 including demolition of old tiles all as specified and directed.

M&L for non skid coloured ceramic tiles 7 to 8mm thick (Square/Rectangular) area of each tile exe 0.18 Sqm but not exe 0.38 sqm in floors etc. set and jointed in cement slurry and pointed with white or coloured cement to match and over laid screed bed or beding layer of mortar 15mm thick for laying floor finish in CM 1:6 including demolition all as specified and directed.

M&L for non skid coloured ceramic tiles 7 to 8mm thick (Square/Rectangular) area of each tile exe 0.18 Sqm but not exe 0.38 sqm in vertical surfaces such as skirting, risers to steps, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles and including 10mm thick on fair faces of brick work or concrete surface back coat to walll tile in CM 1:4 including demolition old tiles all as specified and directed.

M&L for granite tiles of 15-18 mm thick on vertical surface such as skirting, dado, steps, wash basin table top, flooring, kitchen slab, machine cut beddded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing over and including rendering 15 mm thick back coat in CM (1:6) complete all as specified and directed.

M&L for machine cut kota stone slab flooring & skirting 18-20 mm thick laid over including 15 mm thick screed bed in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including mirror polishing complete all as specified and directed.

S&F for providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and all complete all per requirement and direction of Engineer-in-charge

S&F for 4.8 mm thick sheet glass, ordinary quality and glazing with rubber gasket in square not exceeding 0.5 Sqm in each pane for aluminium window, door, ventilator, complete all as specified and directed.

S&F for stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S&F GI frame work size of grid 605 mm x 605 mm for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two eaqual flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kuled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including dismantling wall and ceiling boards of any description fixed in any position, any thickness including cover fillets..

S&F of 12mm gypsum board ceiling fixed with GI angle/channel frame work incl GI wire/ mesh, etc in different levels all complete including joints filled with paster of paris, putty including POP work/Cornices and applying two coat of oil bound distemper including dismantling wall and ceiling boards of any description fixed in any position, any thickness including cover fillets complete all as specified and direcetd.

S&F in repairs solid pvc door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete as specified and directed.

S&F in repairs factory made solid panel PVC door shutter 30 mm thick consisting of frame made out of M.S. tube for top and bottom rails mild steel frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 2mm width stuck inside with solvent cement for stiles and plain colur PVC sheet for top rails, lock rail &bottom rail, panel will be of wire gauze in lieu of PVC Sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube. The wire gauge shall be stretched to tighten firmly complete as specified and directed.

S&F in repairs factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge complete as specified and directed.

S&F in repairs Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia andlength complete as per direction of Engineer-in-Charge complete as specified and directed.

S&F in repairs to factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/wheat husk) and non toxic dditives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance tospread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia andlength complete as per direction of Engineer-in-Charge.

S&F in repairs to factory made single extruded WPC (Wood Polymer Composite) solid plain glazed shutter door of 30 mm size open rebated and prepared to receive gauze, etc.(without sash bars) edge of framing plain, chamfered or rounded, etc; size of members of shutters comprising of virgin polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. Note :- Wiremesh Shall be measured and paid separetely).

S&F of 100mm size butt hinges, medium weight cold rolled mild steel complete all as specified and directed.

S&F of 125mm size butt hinges, medium weight cold rolled mild steel complete all as specified and directed.

S&F of 150 mm long aluminium handles, cast type, anodised fixed to shutters complete all as specified and directed.

S&F of 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F of 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.

S&F in repairs to aluminium (extruded section body ) door closer hydraulically regulated, designation No. 2 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed complete all as specified and directed.

S&F decorative stainless steel powder coated 25mm dia, minimum thickness 2 mm curtain rod with powder coated side fixing brackets, rings and decorative knobs complete all as specified and directed

S&F in repairs 18mm plywood grade BWR, type BB fixed with screws to timber frame work complete all as specified and directed.

S&F in repairs 0.9mm thick decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per maker's instructions complete all as specified and directed.

S&F in repairs to cabinet hinges soft close SS 8 Crank complete all as specified and directed

S&F of 100 mm stainless steel handle, cast type, polished bright complete all as specified and directed.

S&F in repairs to magnetic catcher for cupboard shutter complete all as specified and directed.

S&F of kitchen baskets with 100 % stainless steel , non - magnatic, multilayer chrome plated, argon welded, double sealed ball bearing mechanism kitchen capable of holding plates, cup, saucers, bowls and dongas with 500 mm car case depth of 558mm and height 100mm complete all as specified & directed by Engineer -in -Charge.

S&F of kitchen baskets with 100 % stainless steel, non - magnatic, multilayer chrome plated , argon welded ,double sealed ball bearing mechanism kitchen capable of holding plates, cup, saucers, bowls and dongas with 500 mm car case depth of 558mm and height 150mm complete all as specified & directed by Engineer -in -Charge.

S&F of kitchen baskets with 100 % stainless steel, non - magnatic, multilayer chrome plated , argon welded ,double sealed ball bearing mechanism kitchen capable of holding plates ,cup ,saucers,bowls and dongas with 500 mm car case depth of 558mm and height 200mm complete all as specified & directed by Engineer -in -Charge.

S&F 15 mm bore GI tubing, medium grade, galvanised with all fitting and fixed complete to walls and ceilings or laid in floors including taking down old tube all as specified and directed.

S&F 20 mm bore GI tubing, medium grade, galvanised with all fitting and fixed complete to walls and ceilings or laid in floors including taking down old tube all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete.

S&F in repair 75 mm PVC(SWR) pipes single socketed in any length with rubber rings joints laid in trenches or in floors including taking down eaves gutters and rainwater pipes (any size or pattern) complete all as specified and directed.

S&F in repair PVC(SWR) 110mm pipes single socketed in any length with rubber rings joints laid in trenches or in floors including taking down eaves gutters and rainwater pipes (any size or pattern) complete all as specified and directed.

S&F PVC(SWR) bend of the following bore 75 mm complete all as specified and directed.

S&F PVC(SWR) bend of the following bore 110 mm complete all as specified and directed.

S&F PVC(SWR), branch piece single (Y) equal or unequal bend the following bore 75 mm complete all as specified and directed.

S&F PVC(SWR), branch piece single (Y) equal or unequal bend the following bore 110 mm complete all as specified and directed.

S&F PVC(SWR) junction single (single 'T') equal or unequal of the following bore 75 mm complete all as specified and directed.

S&F PVC(SWR) junction single (single 'T') equal or unequal of the following bore 110 mm complete all as specified and directed.

S&F PVC(SWR) vent cowl for bore 75mm complete all as specified and directed.

S&F PVC(SWR) vent cowl for bore 110mm complete all as specified and directed.

S&F of 500 ltrs capacity rotational moulded polyethylene water storage tanks 3 layers(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including dismantling old water tanks complete all as specified and directed.

S&F 1000 ltrs capacity Rotational moulded polyethylene water storage tanks 3 layers (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I dismantling old water tanks complete all as specified and directed.

S & F 20 mm dia ball valve PTMT, high pressure with polythene float and fly nut complete, screwed for iron pipe with epoxy coated aluminium rod dismantling old water tanks complete all as specified and directed.

S&F in repair of PVC waste pipe 900mm long, 32mm dia size, complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (padestal pattern), white (excluding flushing costern and flush pipe) complete all as specified and directed.

S&F in repairs vitreous china squatting pan of Orissa pattern 580x440 mm white with integral foot rests ( excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F in repairs 15 mm pillar taps cast copper alloy, with capstain head, chromium plated screw down high pressure, with or without lettered HOT or Cold with long shanks and fly-nuts screwed for iron pipes and fixed complete.

S&F in repairs CP 15mm wall/sink mixture/WHB for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repairs wash hand basin counter top having size 440 x 440 x 135 or 420 x 345 x 170 mm rectangular/oval shape complete all as specified and directed by engr in charge.

M&L in repairs PVC (SWR), floor trap plain with grating including jointing with solvent cement 75mm bore complete all as specified and direcetd.

S&F in repairs 10 litres capacity, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets with all internal fittings incl flush pipe complete all as specified and direcetd.

S&F in repairs vitreous china urinal half stall type, white with union for discharge pipe including waste pipe and urinal spreader fixing with 15mm dia pipe complete all as specified and directed

S&F in repairs 15 mm angle valve stopcock cast copper alloy, screwed down high pressure chromium plated screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs 15 mm bib taps, cast copper alloy, screwed down high pressure chromium plated screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs to CP Health faucet suitable for 15mm bore with connecting pieces including all necessary fittings and accessories as directed by Engr in Charge

S&F in repairs to PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and direcetd.

S&F in repairs plastic water closet seat cover, any colour, closed pattern with flat bottom, and mild steel chromium plated for aluminised hinging device complete all as specified and direcetd.

S&F in repairs tubular towel rail, chromium plated, 20 mm dia D type 60 cm long between flanges complete all as specified and directed by engr in charge

S&F in repairs to 15 mm bib cock, two way with flange, cast copper alloy, fancy type, chromium plated screwed down for iron pipe and fixed complete all as specified and directed by engr in charge.

S&F in repairs brass chromium plated shower rose 125mm size with swivel joints incl fixing to steel pipe/union complete all as specified and directed.

S&F in repairs vitreous china wash hand basin white flat back of size 550 x 400mm excluding tap but including brackets/CP brass 32mm waste coupling complete all as specified and directed.

S&F chromium plated grating doom 100 mm dia with waste hole complete all as specified and direcetd.

S&F in reapirs soap dish holder of bootom chrominium plated and glass holer for soap complete all as specified and directed by engr in charge.

S&F in repairs chrominium plated, towel ring round with round flange complete all as specified and directed.

S & F in repairs gun mental, globe or gate valves 20 mm dia with iron wheel head, screwed both ends for iron pipe complete all as specified and direcetd.

Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete ) set in cement mortor for 200 mm internal dia of pipe complete all as specified and directed.

M&L for laying DWCP 200mm dia pipes in trenches class SN-8 conforming to IS 16098 (Part-2) in 6 mtr length with coupler complete all as specified and directed

M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 200 mm bore of pipe with cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate complete all as specified and directed.

M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate, smooth finished and reforming benching as required for 200 mm internal dia of pipe complete all as specified and directed.

S&F for pre-painted galvalume AZ-150 aluminium zinc coating GI based corrugated steel sheet of 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified including dismantling asbestos cement (corrugated, semi corrugated, etc) sheets including ridges in roof covering complete all as specified and directed.

All as per item No 87 above but plain sheet of 0.50mm thick, in ridges complete all as specified and directed.

S&F for steel work in tubular trusses including (purlins and rafters) special shaped washers etc complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

S&F for mild steel plate 6 to 20 mm (plain or chequered) welded to frame or truss (MS pipe) square cut or notched (ordinary andcounter sunk) forming holes, with riveted, bolted complete and confirming to gde Fe-410-0 or Fe 310-0 complete all as specified and directed

M&L for preparation of new or untreated surface of steel and iron surface of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on fair face of brick walls/ concrete surfaces finished even and smooth without using extra cement including taking down cement plaster on brick or stone walls/ceiling etc. all as specified and directed.

M&L for 5 mm thick rendering in CM 1:3 on fair face of brick/ concrete surfaces as in ceiling including taking down cement plaster on brick or stone walls/ceiling etc complete as specified and directed.

M&L for 15 mm thick rendering in CM 1:4 on fair faces of bricks walls surface finished even and smooth without using extra cement including water proofing compound, including taking down cement plaster on brick or stone walls/ceiling etc. all as specified and directed. Note- water proofing compound shall be measured and paid seperately.

M&L for preparation of newly plastered surface of ceiling by brooming down and applying three coat of white wash complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and and applying two coat of oil emulsion distemper white/coloured over one coat of white cement based putty complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coats of exterior weather proof water base emulsion paint over and incl a coat white cement based putty (where ever required), complete all as specified & directed.

M&L for complete removal of old decorated surface of ceiling, including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spotsand applying one coat of oil emulsion distemper white/coloured over complete all as specified and directed.

M&L for complete removal of old decorated surface of wall and applying two coat of oil emulsion distemper white/coloured over and one mm of white cement based putty complete all as specified and directed.

M&L for complete removal of old decorated surface of and applying two coats of exterior weather proof water base emulsion paint over a coat white water proof putty , complete all as specified & directed.

M&L for preparing RCC roof surfaces with wire brush drying and cleaning to remove all foreign materials and washing with water to remove loose particle and applying APP modified bituminous water proofing membrane with polyester reinforcement and plain finish of 3 mm thick (total weight of the finished membrane not less than 3.8 kg/ sqm ± 5 % per sqm) confirming to IS 16532: 2017 over a coat of bitumen VG-10 @ 1.2kg/sqm by the same membrane manufacture of density at 25⁰C, 0.87-0.89 kg/ litre and viscosity 70-160 cps, laying over the primer coat using Butane Torch and sealing all joints, overlapping etc. as per Annex D of IS 16532: 2017 including taking down existing old roof treatment of any description , any type including removal old Tar felt, screed bed and plastering etc, also Two coat of silver paint over APP modified membrane after installing over the roof complete all as specified and as directed. Note:- Bitumen shall be measured and paid seperately.

M&L for cement concrete type B0 1:2:4 (using12.5mm graded stone aggregate ) benching/ angle filleting at the junction of parapet and RCC roof complete all as specified and as directed.

M&L for cutting grooves or chase in brick wall, 75 mm wide and 65 mm deep and including filling with cement mortar 1:4 mixed with water proofing as mentioned in Annex D of IS 16532: 2017, IS 16540: 2017 compound complete all as specified and as directed.

Material & labour for rendering 10 mm thick in cement mortar 1:4 over RCC slab mixed with water proofing compound @ 3% by weight of cement or manufacturer instruction all as specified. Note;- water proofing compound shall be measured and paid separately.

M&L for bituminous VG-10 @ 1.2 kg/sqm in each coat to be applied on prepared surface till the surface is properly impregnated complete all as specified and directed

Taking down carefully copper/aluminium point wiring concealed/ casing caping (light, fan, socket or power) including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings, call bell and removing materials to store for keeping in safe custody and making good disturbed surfaces of walls, floors, etc all as specified and directed.

Dismantling/taking down of unserviceable old existing service /submain wire of any size all as specified and directed

Dismantling/taking down of unserviceable distribution boards with MCBs complete all as specified and directed.

Taking down/dismantling of storage type hot water Geyser of 50/35/25 litre capacity from different locations by disconnecting inlet/outlet connections and deposited to E/M office store yard and taking into charge by JE E/M complete all as specified & directed

Taking down carefully serviceable/unserviceable exhaust fans of any size from its position and deposited to E/M office store yard all as specified and directed.

Taking down carefully ceiling fans of any size from its position and deposited to E/M office store yard all as specified and directed.

Taking down and refixing of LED tube light fitting bright 18/20 Watt, slim elegant design and including connected with 3 core 23/0.0076 insulated copper wire from ceiling rose to fittting connector all as specified and directed.

M&L for concealed point wiring for one light or one fan or one exhaust fan controlled by one switch complete with and includidng single core PVC insulated unsheathed flexible conductor FR-LSH cables 1.5 sqmm as per IS 694:2010 ISI marked annealed multistranded copper conductor drawn through and including medium grade machenical strees PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20mm noninal size including modular / non modular type all accessories/fitting / metal flush box / cover plate/junctiion boxes/ inspection cover etc ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistaranded copper conductor FR-LSH cable as continious earth wire connected to metalic body at one end and common earth dolly to other end including cost of cutting chase and making good to distrubed surfaces of wall with cement mortor 1: 3 including necessary plaster and poiinting in cement mortor 1:3 with white wash / distemper/ other painting complete all as specifiecd and as directed Note:- Cost of cutting chase and making good shall be included in the quated rates)

All as per srl item No -08 here-in-before but for one switch socket combination 5/6 amp on independent board complete all as specified and directed.

All as per srl item No -08 here-in-before but for one three pin socket outlet 5 Amp on same board with other switches complete all as specified and directed.

All as per Srl item No. 08 here-in-before but for one switch socket combination 6 pin 5/ 15 Amps on independent board with wire of size 2.5 Sqmm and 2.5 Sqmm as earth wire.complete all as specified and directed.

All as per Srl item No. 08 here-in-before but for one switch socket combination 6 pin 5/ 15 Amps on independent board with wire of size 4.0 Sqmm and 4.0 Sqmm as earth wire.complete all as specified and directed by Engineer - in - Charge.

S&F switch piano flush type, 5/6 Amps, single pole one way all as specified & directed.

S & F socket out let 5 pin 5/6 Amps complete all as specified and directed.

S&F in switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal all as specified and directed.

S&F in repairs ceiling rose 2/3 terminals 65x25 mm dia poly carbonate isolated all as specified & directed.

S&F in repairs stepped type electronic fan regulator single / double module flush type on the existing phenolic laminated sheet etc. as required. complete all as specified and directed.

S&F in repairs lamp holder insulated PVC/Polycarbonate body with back plate for conduit /batten fittings complete all as specified and directed by Engineer - in - Charge.

Supply & fixing in replacement LED tube light complete fitting 20 watt 220V, AC decorative box type with driver , holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose comlete all as specified and directed.

Supply & fixing in replacement LED tube light complete fitting 10 watt 220V, AC decorative box type with driver , holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose comlete all as specified and directed by Engineer in charge .

S&F in replacement LED lamp 10 Watt B22 CDL complete all as specified and directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Supply and fixing in replacement factory made epoxy powder coated Distribution Board TPN, 4 ways ( VTPN MCCB DB ) and space for MCCB as incomer, with metal door ( IP-43 protection ) fabricated from CRCA sheet and fixed semi flush to wall and suitable for universal mounting and including isolated Neutral Bar, Insulated busbar assembly, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts complete all as specified and directed. NOTE:- MCCB shall be measured and paid seperately.

S&F in repairs MCCB 125 Amp, 3 Pole, breaking capacity 36 KA with complete electrical connections by appropriate size of copper lugs, complete all as specified and directed.

S & F in replacement sheet metal enclosure double door type surface mounted concealed in wall 8 ways, 240 Volts, ISI marked 200 amps bus bar dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed by Engineer - in - Charge.

S&F in replacement sheet metal enclosure double door type surface mounted concealed in wall 12 ways, 240 Volts, ISI marked 200 amps bus bar dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed.

S&F in repair sheet metal enclosure for MCB, DB, TPN, 415 Volts, 200 amps rated busbar, 4 way, Double door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 54 including wooden rectangle board of first class hardwood of suitable size for mounting of DB box complete all as specified and as directed. NOTE:- MCB shall be measured and paid seperatly.

S & F in repairs MCB SP suitable for 240 volts, AC supply 6 to 32 Amps, with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed.

S & F in repairs MCB SPN suitable for 240 volts, AC supply 40 to 63 Amps, with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed.

S&F in repair MCB TPN suitable for 240 volts, 'B' curve,AC supply 63 Amps, with over load and short circuit protection and rupturing capacity not less than 10KA, complete all as specified and directed.

S&F in repair MCB TP suitable for 240 volts, 'B' curve, AC supply 63 Amps, with over load and short circuit protection and rupturing capacity not less than 10KA, complete all as specified and directed.

M&L in repairs for sub main wiring (Single phase) with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 6.0 sqmm drawn in and including rigid PVC rigid conduit medium grade of suitable size but not less than 20mm dia with its accessories, including one run of single core FRLS PVC insulated, unsheathed, stranded copper conductor cable of size 6.0 sqmm as earth continuity and cutting chases to wall as per standard engineering practice & making good the disturbed surfaces as per existing complete all as specified & directed. Notes:- Sub main wiring with two runs of 6.0 sqmm cable & one run of 6.0 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length.

M&L in repairs for sub main wiring(Three phase) with four runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 6.0 sqmm drawn in and including rigid PVC rigid conduit medium grade of suitable size but not less than 25 mm dia with its accessories, including one run of single core FRLS PVC insulated, unsheathed, stranded copper conductor cable of size 6.0 sqmm as earth continuity and cutting chases to wall as per standard engineering practice & making good the disturbed surfaces as per existing complete all as specified & directed. Notes:- Sub main wiring with Four runs of 6.0 sqmm cable(as phase and neautral) & one run of 6 sqmm cable(Earthing) alongwith PVC conduit including its accessories shall be measured and paid one unit length.

S&F in repairs building security light fitting complete with 36 watt LED type pressure die cast aluminium housing and heat resistant toughened glass with frame protection and better optics for uniform distribution complete fixed bracket made out of GI pipe 32 mm dia (light grade) 1.5 metre long and MS clamp and nut bolts washers and connected with twin core cable 1.5 sqmm from ceiling rose to fittings connector all as specified and directed

M&L in replacement of earthing complete with galvanised steel earth plate electrode size 600X600X6mm thick burried directly in ground vertically to a depth not less than 2.25m deep below normal ground level with top edge of earth plate not less than 1.5m deep below normal ground level and connected to and including GI earth lead wire 4mm dia by means of bolts, nuts, check nuts & washers of galvanised iron and connected to test point all as shown in electrical plate No 3 of SSR part I-2009 and all as specified or indicated and testing on completion including excavation and earth work in any type of strata available at site, PCC (1:3:6) type C-1 using 20 mm graded stone aggregate, earthing chamber, pre cast RCC slab 50 mm thick in cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate reinforced with welded steel wire fabric (XPM) weight not less than 4 kg/sqm funnel with GI watering pipe of 20 mm bore medium grade, wire mesh and lugs, GI protection pipe of 15 mm bore light grade up to 7.5 metre long all as specified and directed. NOTE :- GI earth wire and protection pipe beyond 7.5 metre will be measured and paid separately.

Supply and fix in replacement sheet metal enclosures with socket plug top and MCB's with two pin and earth plug and socket complete with one Single pole MCB 240 V grade 25/20 Amp complete all as specified and directed .

Supply and fix heavy duty exhaust fan, steel body AC single phase 230V of size 300 mm sweep with, blades, and frame and louvers including cutting of hole in existing wall and resurfacing of disturbed area of wall complete all as specified and as directed.

Supply and fix in replacement heavy duty exhaust fan, steel body AC single Phase. 230V of size 380m sweep with, blades, and frame and louvers complete all as specified and as directed.

Supplying, installing, testing & commissioning, in replacement vertical type storage water heater (geyser), 50 litres capacity, standing loss less than 0.562 Kwh per day for 45⁰C difference of temperature as per IS 2082 (five-star rated as per BEE), reheating time less than 60 minutes, mixing factor less than 20%, shock proof high density PUF insulation body material, glass lined inner tank material having warranty 7 years on tank material, 4 years on heating element and 2 years on other spares parts comprising following fittings (a) glass coated incoloy element (b) capillary type thermostat (c) thermal cutout (d) multifunction valve (e) earth leakage circuit breaker (f) magnesium anode rod cathodic protection (g) flexible cable of suitable length with 3-pin plug of 16A capacity (h) drain plug (j) fusible plug fitted on the crown of water heater with operating temperature between 100⁰C to 110⁰C including fixing by grouting and fastener complete all as specified and as directed Note :-(i) Cost of taking down old/unserviceable geyser & deposit to MES Store yard in also include in Quoted rate.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) without remote controller complete all as specified and as directed.

Supply and fix wall mounted fan of metal body with plastic blades, 400 mm sweep, 1350 rpm, 55 watts, 240 V, 50 Hz, air deliver 65 m³ per minute, three Nos of speed controlling complete all as specified and all as directed.

M&L for cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers,welding, bending cold or hot,drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint all as specified and directed.

M&L for perforated powder coated cable tray of size 25x100x25 mm, thickness 2mm for holding of LT cables/others cables incl all accessories all as specified and directed. Make: Daspar Cat Part No PPC025x0100x025G16 / Super Steel Industry / SV metals Pvt Ltd

M&L for perforated powder coated cable tray of size 40x150x40 mm, thickness 2mm for holding of LT cables/others cables incl all accessories all as specified and directed. Make: Daspar Cat Part No PPC040x0150x040G16 / Super Steel Industry / SV metals Pvt Ltd

Excavation in post holes (or similar holes) each n. exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n. exc 50m and making good surface in hard dense soil.

S&F of PVC insulated PVC sheathed, flexible circular cable 3 core, 2.5 Sqmm strandered copper conductor AC, 230 V complete all as specified and directed.

S&F for non metalic heavy grade PVC conduit, ISI marked of size 20mm dia incl all accessories complete all as specified and directed.

M&L for PCC 1:3:6, type C2 using 40 mm graded stone aggregate in foundation, filling in and mass concrete as in boundary pillars and post etc all as specified and directed.

Supply, installation and commissioning heavy duty electrical single phase 230 Volt chimney wall mounted suction capacity not less than 1400 cubic meters per hour & sensor based control , made of SS 304 Grade with a baffle system , auto control features, size not less than 24 inch incl GI duct of thickness 1 mm with support frame with nut , bolts , fasteners complete all as specified and directed.

Deduct Schedule of credit (calculation will be done off line) Rs.33338.00

sachinder singh (BID ID -3496888)

MS MOHD RIZWAN KHAN (BID ID -3496949)

JYOTI ENTERPRISES (BID ID -3497190)

SHIV SHANKAR MISHRA (BID ID -3497068)

M/s Shree Ganesh Traders (BID ID -3496251)

NDS TRADERS (BID ID -3496166)

M/s Gulshan and Brothers (BID ID -3496459)

J.P ENTERPRISES (BID ID -3497237)

POONAM ELECTRIC INDUSTRY (BID ID -3496514)

M/S Shanti Traders (BID ID -3496832)

KISHOR KALAMKAR (BID ID -3497152)