PROVISION OF STATION STORE , STORE ROOMS , SHED , FENCING AND ADDITION ALTERATION TO BUILDING NO.P-3 AT OLD AMRITSAR CANTT

Amount

Taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water etc ; Complete all as specified and as directed by Engineer-In-Chrage.

Demolition of brickwork, built in cement mortar including all quoins, arches, pillars, etc. ; Complete all as specified and as directed by Engineer-In-Chrage.

Taking down Chowkats or frames from the opening of size not exceeding 1.5 sqm each with shutters ( without taking off shutters from the frames) ; Complete all as specified and as directed by Engineer-In-Chrage.

Taking down Chowkats or frames from the opening of size exceeding 1.5 Sqmtr but not exceeding 4 Sqmtr each with shutters ( without taking off shutters from the frames) ; Complete all as specified and as directed by Engineer-In-Chrage.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises ; Complete all as specified and as directed by Engineer-In-Chrage.

Demolition reinforced roofs, floors (other than ground floors), beams staircases, landing, chajjas and similar suspended work (reinforcement cut as required to facilitate demolition) ; Complete all as specified and as directed by Engineer-In-Chrage.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.Laid, bedded and pointed in any mortar ; Complete all as specified and as directed by Engineer-In-Chrage.

Dismantling boarding , any description , fixed in any position with screws ; Complete all as specified and as directed by Engineer-In-Chrage.

Taking up or down steel tubing and connections 15mm bore including cleaning for refixing or removal to store. ; Complete all as specified and as directed by Engineer-In-Chrage.

Taking up or down steel tubing and connections 20mm bore including cleaning for refixing or removal to store. ; Complete all as specified and as directed by Engineer-In-Chrage.

Excavating in trenches, n exc 1.5m wide and n exc 1.5 m depth; for foundation, etc. or for shafts, wells, cesspits, manholes,pier holes, etc. n exc 10 sqm on plan and n exc 1.5m in depth and getting out soft loose soil. ; Complete all as specified and as directed by Engineer-In-Chrage.

Material and Labour for Cement concrete type D-2, 1:4:8 using 40mm graded agregate as in foundations, filling and mass concrete ; Complete all as specified and as directed by Engineer-In-Chrage.

Material and Labour for brick work with sub class 'B' bricks straight curved on plan exc 6 mean radius built in CM 1:6 ; Complete all as specified and as directed by Engineer-In-Chrage.

Material and Labour for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, in half brick thick walls and built in CM 1:4 ; Complete all as specified and as directed by Engineer-In-Chrage.

Material and Labour for 40mm thick Damp proof course in CM 1:2:4 type B-0 to horizontal or vertical surfaces including necessary formwork ; Complete all as specified and as directed by Engineer-In-Chrage.

Material and Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:6 finishing even and smooth without using extra cement ; Complete all as specified and as directed by Engineer-In-Chrage.

Material and Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4 finishing even and smooth without using extra cement ; Complete all as specified and as directed by Engineer-In-Chrage.

Material and Labour for rendering 10 mm thick on fair faces of brick work or concrete surfaces on ceiling in CM 1:3 finishing even and smooth without using extra cement ; Complete all as specified and as directed by Engineer-In-Chrage.

Material and labour for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over & including 1mm thick(average) birla cement wall putty ; Complete all as specified and as directed by Engineer-In-Chrage.

Material and Labour for preparation of newly plastered surface of wall and applying two coats cement base paint over a coat of primer to match the existing treatment ; Complete all as specified and as directed by Engineer-In-Chrage.

Material and labour for preparation of newly plastered surface of ceiling and applying two coats of whitewash ; Complete all as specified and as directed by Engineer-In-Chrage.

Spreading and levelling in layers n exc. 25 cm thick including well ramming including watering as required ; Complete all as specified and as directed by Engineer-In-Chrage.

Material and Labour for Hardcore of borken stone or boulder, gauge n exc. 63 mm, deposited , spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface ; Complete all as specified and as directed by Engineer-In-Chrage.

Material and Labour for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in sub base of floor. ; Complete all as specified and as directed by Engineer-In-Chrage.

Material and Labour for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregates) as in flooring ; Complete all as specified and as directed by Engineer-In-Chrage.

Returning, filling in, including spreading, levelling , watering and well ramming in layers not exc 25 cm. ; Complete all as specified and as directed by Engineer-In-Chrage.

Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point ; Complete all as specified and as directed by Engineer-In-Chrage.

Material and Labour for 50mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate as in plinth protection Finishing fair and even. ; Complete all as specified and as directed by Engineer-In-Chrage.

Supply and Fixing non skid ceramic light coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:6 & ; Complete all as specified and as directed by Engineer-In-Chrage.

Supply and Fixing glazed ceramic coloured tiles 450x300mmx6mm thick, etc. on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering plaster in CM 1:4 on brick surface ; Complete all as specified and as directed by Engineer-In-Chrage.

Material and Labour for Reinforced Cement concrete type B-1 1:2:4 using using 20mm graded aggregate (nominal mix) in beams, cantilevers, bressumers, lintels over 1.5 m span ; Complete all as specified and as directed by Engineer-In-Chrage.

Material and Labour for RCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like ; Complete all as specified and as directed by Engineer-In-Chrage.

Material and Labour for reinforced Cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregates) as in chajjas, fascia, slab and the like ; Complete all as specified and as directed by Engineer-In-Chrage.

Material and Labour for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. ; Complete all as specified and as directed by Engineer-In-Chrage.

Material and Labour for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), Flat, finished even and rough ; Complete all as specified and as directed by Engineer-In-Chrage.

Material and Labour for Formwork to Chullah hoods, chajjas, weather shades, corbels, water troughs and similar items including edges rough finished surfaces of concrete ; Complete all as specified and as directed by Engineer-In-Chrage.

Supply and Fixing mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. Or securing with clips ; Complete all as specified and as directed by Engineer-In-Chrage.

Material and Labour for Mild steel bars 5mm dia. and over up to and including 10 mm dia. in stirrups, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia ; Complete all as specified and as directed by Engineer-In-Chrage.

Material and Labour for Granite (of any type) work (table rubbed and polished) 20 mm thick in steps , jambs, pillars, window cills, cooking plateforms and like in cemnet mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick rendering in CM 1:4 ; Complete all as specified and as directed by Engineer-In-Chrage.

Supply and Fixing powder coated aluminium frame (including 2 track / 3track profile) for doors ,windows, ventilators with one or more rebates including joining cleats for fixing ; Complete all as specified and as directed by Engineer-In-Chrage..( Min. thickness of powder coating 50 micron)

Supply and fixing powder coated (Min thickness of powder coating shall be 50 micron) aluminum windows shutter of size min 25mmx63mm for sliding type windows of standard tubular sections of approved make having glazed panels or glazed and gauzed panels of appropriate size running on seperate tracks in the channel conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth,rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, handle, tower bolt of standard size all complete as per architectural drawings and the directions of Engineer-in-charge. All the panels shall be of appropriate size having overlaps as required and including all required beadings, clips, rollers, rubber gaskets, cleats, etc. complete and powder coating in approved shade and colour. Note:- Each panel shall be measured separetely. Glass pane and wire mesh shall be measured and paid separetely.

Supply and fixing powder coated (Min thickness of powder coating shall be 50 micron) aluminum door shutter of having weight not less than 0.55 kg/m for sliding type door of standard tubular sections of approved make having glazed panels of appropriate size running on seperate tracks in the channel conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth,rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, handle, tower bolt of standard size, all complete as per architectural drawings and the directions of Engineer-in-charge. All the panels shall be of appropriate size having overlaps as required and including all required beadings, clips, rollers, rubber gaskets, cleats, etc. complete and powder coating in approved shade and colour. Note:- Each panel shall be measured separetely. Glass pane shall be measured and paid separetely.

Supply and Fixing Sheet glass, 5.5mm thick ordinary quality, in squares,exceeding 0.50 sqm in each pane including rubber packing and aluminium beading with and incl solar control film 25 Micron reflective type sticked to glass panes as per instructions of manufacturer ; Complete all as specified and as directed by Engineer-In-Chrage.

Supply and Fixing Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples ; Complete all as specified and as directed by Engineer-In-Chrage.

Supply and Fixing Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed ; Complete all as specified and as directed by Engineer-In-Chrage.

Supply and Fixing Brass mortice lock, 4 levers, verticle type, size 100 mm, ; Complete all as specified and as directed by Engineer-In-Chrage.

Supply and Fixing 15mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors ; Complete all as specified and as directed by Engineer-In-Chrage.

Supply and Fixing 20mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors ; Complete all as specified and as directed by Engineer-In-Chrage.

Supply and fixing plain basket SS of size 470x485x200 mm of godrej (Product Code 5904) or equivalent to be fixed with drawer as per manufacturer instructions ; Complete all as specified and as directed by Engineer-In-Chrage.

Supply and fixing cup & saucer basket SS of size 470x485x100 mm of godrej (Product Code 5905) or equivalent to be fixed with drawer as per manufacturer instructions ; Complete all as specified and as directed by Engineer-In-Chrage.

Supply and fixing perforated Cutlery basket SS of size 470x485x100 mm of godrej (Product Code 6133) or equivalent to be fixed with drawer as per manufacturer instructions ; Complete all as specified and as directed by Engineer-In-Chrage.

Supply and fixing thali-plate basket SS of size 470x485x200 mm of godrej (Product Code 5908) or equivalent to be fixed with drawer as per manufacturer instructions. ; Complete all as specified and as directed by Engineer-In-Chrage.

Supply and fixing grain trolly SS304 of size 470x485x350 mm of godrej (Product Code 5917) or equivalent to be fixed with drawer as per manufacturer instructions. ; Complete all as specified and as directed by Engineer-In-Chrage.

Supply and fixing soft closing drawer channel 500mm long of godrej (Product Code 7087) or equivalent to be fixed for moving of drawer as per manufacturer instructions. ; Complete all as specified and as directed by Engineer-In-Chrage.

Supply and fixing 18 mm thick solid PVC board as in cupboard shelves, in kitchen cabinet etc ; Complete all as specified and as directed by Engineer-In-Chrage.

Supply and fixing 5mm thick solid PVC board as in back side of kitchen cabinet etc complete al as specified. ; Complete all as specified and as directed by Engineer-In-Chrage.

Supply and fixing for 18mm thick plywood, grade BWP, type BB fixed with screws as in cupboard shutters with and including 0.9mm thick decorative laminate type one of surface finish,colour and pattern as approved on one face,fixed with approved adhesive as per manufacture's instruction ; Complete all as specified and as directed by Engineer-In-Chrage.

Supply and fixing 40 mm long hinges self closing type hydrulic type complete all as specified. ; Complete all as specified and as directed by Engineer-In-Chrage.

Supply and Fixing PVC coating curtain rods 20mm dia including brackets to hold the rod & a set of ABS finials of approved quality & appropriate qty of ABS plastic rings ; Complete all as specified and as directed by Engineer-In-Chrage.

Material and Labour for PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in padding concrete fair finish avg 50mm thick, roof kerbs or mud stops, rounded or chamfered on edges and like including weathering slight rounded and throating ; Complete all as specified and as directed by Engineer-In-Chrage.

Material and Labour for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm including cleaning surfaces etc ; Complete all as specified and as directed by Engineer-In-Chrage.

Supply and Fixing (minimum) 3mm thick APP film based poly meric membrance minimum weighing 3Kg per Sqm reinforced with polyester non wove fabric (weight not less than 150 gms/sqm) land on primed surface by forced application over entire roof area with over lapping 100mm to either sides and sealed in after cleaning down the roof by brooms ; Complete all as specified and as directed by Engineer-In-Chrage.

Material and Labour for Cement concrete tiles 20cmx20cmx20mm thick,machine pressed ; set, jointed and pointed in neat cement slurry in floors with grey cement and no pigment, and cut and polished over and including 20mm thick screed bed in CM 1:4 ; Complete all as specified and as directed by Engineer-In-Chrage.

Taking up 100mm bore cast iron water mains (including all fittings) with spigot and socket ends and lead joints and recovering lead as in soil waste and vent pipes ; Complete all as specified and as directed by Engineer-In-Chrage.

Supply and Fixing 110mm bore PVC(SWR) pipes single socketed in any length fixed to walls with dash true nut and bolt at every 2mtr length including) including all fittings complete all as specified and directed by Engineer-in-charge Make:-Supreme ,Finolex, Jyoti.

Supply and Fixing 110mm bore PVC(SWR) pipes single socketed in any length laid in trenches with dash true nut and bolt at every 2mtr length including) including all fittings complete all as specified and directed by Engineer-in-charge Make:-Supreme ,Finolex, Jyoti.

Supply and Fixing 110mm PVC (SWR) bends any radius with access door ; Complete all as specified and as directed by Engineer-In-Chrage.

Supply and Fixing 110mm PVC floor trap ; Complete all as specified and as directed by Engineer-In-Chrage.

Supply and Fixing sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm ; Complete all as specified and as directed by Engineer-In-Chrage.

Supply and Fixing sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm ; Complete all as specified and as directed by Engineer-In-Chrage.

Supply and Fixing 15mm bore brass chromium plated sink cock swan neck fixed with GI socket suitable for kitchen sink ; Complete all as specified and as directed by Engineer-In-Chrage. Make - Jaquar Cat Part no QQP 7347PM

Supply and Fixing PVC waste pipe32mm dia fixed to sink ; Complete all as specified and as directed by Engineer-In-Chrage.

Supply and Fixing 100mm dia CP grating with or without hole type ; Complete all as specified and as directed by Engineer-In-Chrage.

Supply and Fixing brass cromium brass plated fancy type bib taps 15 mm bore long nose screwed down screwed for iron pipe or for brass ; Complete all as specified and as directed by Engineer-In-Chrage. Make - Jaquar Cat Part no QQP 7037PM

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil ; Complete all as specified and as directed by Engineer-In-Chrage.

Material and Labour for Cement concrete type E-2, 1:5:10 using 40mm graded agregate as in foundations, filling and mass concrete ; Complete all as specified and as directed by Engineer-In-Chrage.

Material and Labour for 40mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in flooring and finishing concrete surface even and smooth without using extra cement ; Complete all as specified and as directed by Engineer-In-Chrage.

Material and Labour for 38mm wide Glass dividing strips, 3 mm thick and inserted in position,conform to design ; Complete all as specified and as directed by Engineer-In-Chrage.

Material and Labour for Prepration of new untreated steel surface of any description , over 10 cm in width or girth, not otherwise described and applying two coat of synthatic enamel paint over a coat of red oxided primer ; Complete all as specified and as directed by Engineer-In-Chrage.

Supply and Fixing Steel work in trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St. 240 ; Complete all as specified and as directed by Engineer-In-Chrage.

Supply and Fixing Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws ; Complete all as specified and as directed by Engineer-In-Chrage.

Supply and Fixing Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in ridge, fixed with self tapping screws ; Complete all as specified and as directed by Engineer-In-Chrage.

Supply and Fixing GI frame work for seameless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws as 450mm centre to centr/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre and Material and Labour for Providing and fixing Gypsum board 12 mm thick in ceiling fixed with screw as per manufacturers instructions incl preparation of new surfaces & applying two coat of OBD on ceiling over chalk whitening ; Complete all as specified and as directed by Engineer-In-Chrage.

Material and Labour for Excavating in post holes (or similar holes) each hole not exceeding 0.5 Cum, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and remvoing surplus soil to a distance not exceeding 50m and making good surfaces in soft/loose soil ; Complete all as specified and as directed by Engineer-In-Chrage.

Material and Labour for Cement concrete type B2, 1:2:4 (40mm graded aggregate) in foundations, filling and mass concrete ; Complete all as specified and as directed by Engineer-In-Chrage.

Material and Labour for Cement concrete type B2, 1:2:4 (40mm graded aggregate) in floor 75mm thick and finish concrete surface even and smooth without using extra cement ; Complete all as specified and as directed by Engineer-In-Chrage.

Material and Labour for apply three coats of white wash including preparation of new plaster surfaces. ; Complete all as specified and as directed by Engineer-In-Chrage.

Material & labour for cement concrete 1:3:6, type C-2 (using 40 mm graded crushed stone aggregates) as in foundation, filling and mass concrete ; Complete all as specified and as directed by Engineer-In-Chrage.

Material & labour for Rolled mild steel work Fe 410 -W (Grade E- 250) quality A, as in fencing posts with or without Y/U/Swan Neck made of angle or other section, made to shape complete, welding, drilled for fixing or holding of barbed wire or chain link mesh , etc. or for fixing or holding of fibre glass sheet ; to be prepared for hanging or steel hanging fittings; also fastening and fixing ; Complete all as specified and as directed by Engineer-In-Chrage.

Supply and Fixing 2mm thick Fibre glass reinforced translucent plain sheeting with side lap fixed with L type or J type hook bolt and washer in roof, wall etc ; Complete all as specified and as directed by Engineer-In-Chrage.

Supply & fixing Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long, dia of neck 5 to 10mm ; Complete all as specified and as directed by Engineer-In-Chrage.

Material and Labour for RCC (Nominal Mix) type B1, 1:2:4 (20mm graded aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete. ; Complete all as specified and as directed by Engineer-In-Chrage.

Supply and Fixing Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of rough finished surfaces of concrete in foundation and plinth beams; and similar work; vertical or to batter ; Complete all as specified and as directed by Engineer-In-Chrage.

Supply and Fixing Formwork to sides of pillars, posts, struts, piers, columns and stanchions of rough finished surfaces of concrete ; Complete all as specified and as directed by Engineer-In-Chrage.

Material and Labour for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide ; Complete all as specified and as directed by Engineer-In-Chrage.

Material and Labour for TMT Mild steel bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips ; Complete all as specified and as directed by Engineer-In-Chrage.

Supply and Fixing pressed steel frames 1.25mm thick for door size of frame125 X 60mm with double rebates including necessary fixing lugs, hinges, lock strike plate and filling of chowkats with PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) and for filling of hold fast and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges and two coats of synthetic enamel paint to outer surface with red oxide primer after prepration of surfaces ; Complete all as specified and as directed by Engineer-In-Chrage.

Supply and Fixing IInd class hard wood Glazed and skeleton shutters 35mm thick divided into square, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a) ; supplied and fitted to chowkats ; Complete all as specified and as directed by Engineer-In-Chrage.

Material and Labour for Box type steel window double shutters (both Glazed & Gauzed shutters) made of ERW tube P - section of size 60 mm x 25 mm double rebated outer frame, comprises glazed skelton & gauzed shutter of ERW tube P-Section size 50mm x 20mm with one/two Nos openable leaf for each shutter consisting of two Nos Sashbar of T-section 20 x 3 mm welded to frame with one No verticle mullion of ERW box type T Section of size 60mm x 25mm and FI 2mm thick welded/screwed to frame for fixing of glass with & including Sheet glass, SS wire cloth, fittings and fixture like as Handle, Tower Bolt, Stopper, Cleat, Pintal hinges, holdfast etc as given below all as shown on drg No CEJZ/TD-1019/08 Sh 1/3 to 3/3 dt 01 May 2008 ; complete all as specified and as directed by the Engineer-in-Charge :- (a) Hold fasts 150mm long of 12mm x 3mm MS flat - 4 Nos per Window. (b) Handle of Z section 20mm x 25mm, 100mm long- 01 No per leaf. (c) MS tower bolt 150mm long - 02 Nos per leaf.(d) Z Section stopper 20mm x 25mm, 100mm long - 1 No per leaf. (e) Cleat 55mm long of hollow square 15mmx12mm - 02 Nos per leaf. (f) MS pintel hinges size 75mmx12mm - 2 Nos per leaf (g) MS Guard bars 10mm square bar @ 10Cm C/C fixed horizontaly. (h) 3mm thick clear sheet glass 3 nos per glazed leaf of reqd sizes glazing with oil putty. (j) Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples to each gauged shutters of window. (k) Filling hold fast blocks with PCC 1:2:4 type B1 (using crushed stone aggregate, minimum four number of each frame ) and (l) Repair all the damaged surfaces around window with plaster & other finishes to matches the surfaces with as per existing specifications complete.

Material and Labour for Box type steel ventilator made of ERW tube P-section of size 60mmx25mm outer frame (single rebated), comprises glazed shutter, frame of ERW tube and FI 2mm thick welded/screwed to frame for fixing of sheet glass with & including 3mm thick Sheet glass glazing with oil putty, MS Guard bars 10mm square bar @ 10Cm C/C fixed horizontaly, fixture and fittings like as Stopper, Cleat, Pintal hinges, hold fast etc all as shown on drg No CEJZ/TD-1019/08 sheet 1/3 to 3/3 dt 01 May 2008 , including Filling hold fast blocks with PCC 1:2:4 type B1 (using crushed stone aggregate, minimum four number of each frame ) and repair all the damaged surfaces around ventilators with plaster & other finishes to matches the surfaces with as per existing specifications complete.

Supply and Fixing Flush shutters in existing chowkhats, solid core construction , with block board core and plywood face panels, commercial type on both sides ; Complete all as specified and as directed by Engineer-In-Chrage.

Material and Labour for Galvanised mild steel wire cloth, 0.63 mm nominal dia. of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples ; Complete all as specified and as directed by Engineer-In-Chrage.

Supply and Fixing 100mm longe Butt Hinges, medium weight, cold rolled mild steel and fixed. ; Complete all as specified and as directed by Engineer-In-Chrage.

Supply and Fixing 150mm long aluminium, anodised, barrel tower bolts of extruded section and fixed ; Complete all as specified and as directed by Engineer-In-Chrage.

Supply and Fixing Aluminium handles, 150mm size cast type anodised ; Complete all as specified and as directed by Engineer-In-Chrage.

Supply and Fixing 200mm Aluminium alloy. Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed. ; Complete all as specified and as directed by Engineer-In-Chrage.

Material and Labour for preparation of new wooden surface over 10cm width or girth and applying 2 coats of synthetic enamel paint (ordinary tint) over a coat of pink primer c ; Complete all as specified and as directed by Engineer-In-Chrage.

Material & labour for 20-25mm thick machine cut kota stone slab flooring with Kota stone (of size not less than 0.5 sqm each) , laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab ; over and including 20mm thick screed bed in cement mortar 1:6 , with & including cutting, rubbing and mirror polishing to the entire kota stone slab flooring with rubbing machine using suitable size of cutting stones to the entire satisfaction of the AGE , complete all as specified and directed by the Engineer-in-Charge.

Material & labour for 20-25mm thick machine cut kota stone slab as in as Skirting/dado/riser/steps with Kota stone (of size not less than 0.5 sqm each) , laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab ; over and including 10mm thick screed bed in cement mortar 1:4 , with & including cutting, rubbing and mirror polishing to the entire kota stone slab flooring with rubbing machine using suitable size of cutting stones to the entire satisfaction of the AGE , complete all as specified and directed by the Engineer-in-Charge.

Material and Labour for Cement concrete 75 mm thick type C-2 (1:3:6) using 40 mm graded stone aggregate as in plinth protection etc finished even and smooth using extra cement ; Complete all as specified and as directed by Engineer-In-Chrage.

Supply and Fixing (SWR) pipes of 110mm dia single socketed, in any length with rubber ring joints, laid in trnches or in floors ; Complete all as specified and as directed by Engineer-In-Chrage.

Supply and Fixing (SWR) bend of any radius of 110mm dia ; Complete all as specified and as directed by Engineer-In-Chrage.

Material and Labour for Machine pressed coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigments over and including 50mm thick sand cushioning ; Complete all as specified and as directed by Engineer-In-Chrage.

Supply and fixing Ergo Box drawer system 450mm Acrylic, Grey/White (Std Packaging 06 Nos) (Product Code 6588) of Godrej ; Complete all as specified and as directed by Engineer-In-Chrage.

Supply and fixing Carrousel SS- 600mm dia (Product Code 5818) of Godrej ; Complete all as specified and as directed by Engineer-In-Chrage.

Supply and fixing Soft Pro Top System Left/Right (Product Code 6417/6418) of Godrej ; Complete all as specified and as directed by Engineer-In-Chrage.

Supply and fixing Three Shelf Pull Out SS of size 150mmx485mmx530mm (Product Code 6171) of Godrej ; Complete all as specified and as directed by Engineer-In-Chrage.

Supply and fixing Glass tray Plate tray 535mm (Product Code 5795) of Godrej ; Complete all as specified and as directed by Engineer-In-Chrage.

Material & Labour Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust , etc. and brushing neat cement slurry with 3.0 Kg of cement per Sqm ; Complete all as specified and as directed by Engineer-In-Chrage.

Taking down Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each complete and refixing in the same opening after easing and adjustment all as specified and directed.

Supply and Fixing for Aluminium glazed shutter for doors duly powder coated (Minimum thickness of powder coating 50 micron) for Al-section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading ; complete all as specified and as directed by the Engineer-in-Charge.

Material & labour for Point wiring for one light point / fan point / bell point / 5 Amp socket outlet point (independent point), controlled by two , two way switches with 1.50 Sqmm size PVC insulated unsheathed 1100 volts grade single core (multi-stranded) copper conductor cable (FRLS) (using colour code as per IS) drawn into and including medium grade PVC conduit concealed (not less than 25 mm dia) all necessary fittings and accessories fixed concealed (including chase cutting in brick/stone masonery wall for fixing conduit and plastering the external surfaces and matching the same with existing specifications) and including sunk Metal flush box , cover plate with suitable size of frame for fixing/mounting fitting like modular switches, sockets, including one continuous run of 1.50 Sqmm size PVC insulated unsheathed 1100 volts grade single core (multi-stranded) copper conductor cable (FRLS) (using green colour) as in earth wire and connected to common earth dolly, and making good of disturbed surface of cement plaster, whitewash/ distemper to match with original colour ; complete all as specified & directed by Engineer-in-Charge. Note :- Cost of modular metal flush boxes with a coat of synthetic enamel paint over a coat of red oxide to steel surface to avoid rust, concealed in wall with suitable white cover plate for mounting switch/sockets, regulator, bell push etc and Cost of cutting chases & making good to distrubed surface with cement mortar, if required any shall be deemed to be included in the quoted rate.

All as per item No 122.00 above but one 5 Amp 3 pin socket outlet on the same board with other switches complete.

All as per item No 122.00 above but for one 5 pin 5 amps socket outlet on the independent board.

Material & labour for Point wiring for 15 Amp socket outlet point (independent point), controlled by one, one way switch with 2.50 Sqmm size PVC insulated unsheathed 1100 volts grade single core (multi-stranded) copper conductor cable (FRLS) (using colour code as per IS) drawn into and including medium grade PVC conduit concealed (not less than 25 mm dia) all necessary fittings and accessories fixed concealed (including chase cutting in brick/stone masonery wall for fixing conduit and plastering the external surfaces and matching the same with existing specifications) and including sunk Metal flush box , cover plate with suitable size of frame for fixing/mounting fitting like modular switches, sockets, including one continuous run of 2.50 Sqmm size PVC insulated unsheathed 1100 volts grade single core (multi-stranded) copper conductor cable (FRLS) (using green colour) as in earth wire and connected to common earth dolly, and making good of disturbed surface of cement plaster, whitewash/ distemper to match with original colour ; complete all as specified & directed by Engineer-in-Charge. Note :- Cost of modular metal flush boxes with a coat of synthetic enamel paint over a coat of red oxide to steel surface to avoid rust, concealed in wall with suitable white cover plate for mounting switch/sockets, regulator, bell push etc and Cost of cutting chases & making good to distrubed surface with cement mortar, if required any shall be deemed to be included in the quoted rate.

Supply and Fixing modular switch 1 way 6Amps, 240 volts, 1 module ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing modular switch 1 way 16A, 240 volts, 1 module ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing modular fan step regulator, 2 module, 240 Volts, 50 Hz, suitable for ceiling fan of any sweep ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing modular socket, 6A, 240 volts, 3 pin combined 2 module, ISI marked flush type ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing modular socket, 6A/16A, 240 volts, 2/3 pin combined 2 module flush type ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing ceiling rose surface PVC/Polycarbonate, isolated body with face Bakelite 65x50 mm three terminal ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing Lamp holder angular type, PVC/Polycarbonate type with back plate suitable for batten fittings ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing for distribution board made out of sheet metal enclosure (CRCA sheet) dust and vermin proof, double door, SPN 8 way, 240 volts grade with 200 Amps insulated rated bus bar, earth bar IP- 43 & IK-09, door earthing flush to wall, including testing suitable for fixing MCB SPN, SP etc, including taking down existing unserviceable one and removing from site ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing for MCB of SP 5 to 32 Amps current carrying capacity, 240V, 10KA 'C' curve, ISI marked, fixed in the MCB DB complete conforming to IS/IEC-60898-1 2002 with connection testing and commissioning including taking down old unsv one from the site ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing for MCB SPN 32 Amps current carrying capacity, 240V, 10KA 'C' curve, ISI marked, fixed in the MCB DB complete conforming to IS/IEC-60898-1 2002 with connection testing and commissioning including taking down old unsv one from the site ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing for sub main wiring with 2 runs of 4.0 sqmm single core, multi-stranded PVC insulated, FRLS unsheathed cable 1100 Volts grade with copper conductor drawn through and including concealed non metalic PVC conduit, medium grade, ISI marked, suitable size with conduit fittings and accessories concealed in wall/ceiling/floor including 1 run of 4.0 Sqmm multistranded PVC insulated FRLS, copper conductor cable as earth continuity conductor and connecting to common earth dolly incl taking down old unsv one from site complete all as directedNOTE: Two runs of 4.0 sqmm copper cable and one run of 4.0 sqmm copper cable alongwith non metallic PVC conduit/conduit accessories will be measured as one unit length ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing for LED lights fitting 1x 20W, 220V, AC decorative box type with driver, double sided connection, holder including LED tube light connecting up with 3 core flexible copper conductor cable of suitable size from ceiling rose, including taking down existing unserviceable one and removing from site ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing for LED roadway luminaries 35 Watt, 230 V AC outdoor type with epoxy black powder coated sheet, high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket of suitable size with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete incl connecting wire with flexible PVC insulated copper cables from ceiling rose to fitting complete and testing, including taking down existing unsv one and removing from site ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for Earthing complete in replacement with galvanised iron mild steel earth plate electrode 60 cm x 60 cm x 6.3mm thick burried directly in ground vertically to a depth not less than 2.25 m below ground level with top edge of earth plate at a depth of not less than 1.5 m below normal ground level, connected to glavanised earth lead of GI wire of size 4mm dia by means of GI Bolts, Nuts, check nuts & washers and other end of the earth wire connected to earthing test point and protected by galvanised iron pipe light grade 25mm dia from earth plate to Panel/DBs and water pipe 20mm dia GI medium grade from top of the earth electrode raised upto a level of 50cm above ground level, MS funnel with wire mesh embeded in earthing pit of size 30x30x30cm in PCC (1:3:6) type C-1 incl exposed surfaces smoth finished with 15mm thick cement mortar (1:6), RCC pre-cast (1:2:4 type B-1) cover slab of 40mm thick with 2 Nos. MS handles of 12mm dia suitable for carrying of pit cover, Angle iron frame made out of 40x40x4mm angle iron for 30x30mm PCC pit for holding the pit cover including providing charcoal or coke and salt in alternative layers of 15 cm including necessary earth work in soft/loose soil, returning, refilling and removing of surplus soil to a distance n. exc. 50 mtr testing complete all as shown in electrical plate No-3 of MES Schedule Part-I of SSR-2009 ; Complete all as specified and as directed by Engineer-in-Charge. NOTE: (a) Cost of excavation, earth work, watering pipe, test point, MS Funnel with wire mesh and PCC pit with cover will be deemed to be included in the quoted rate. No extra cost shall be paid to the contractor against these items. (b) On testing after completion of job, if desired earth resistance is not obtained, the earthing shall be redone by the contractor & no extra cost will be given to the contractor.

Supply, install & testing exhaust fan, Metal body 300mm sweep heavy duty, 240 volts, single phase, 900 RPM complete fixed to wall with suitable MS bolts, grouted to wall and connecting up including provision of MS louver, cable from connector to fan with 3 core flexible cable of size 24/0.2mm with copper conductor from ceiling rose to to exhaust fan including writing MES No. of 2 cm height with synthetic enamel black paint ; Complete all as specified and as directed by Engineer-in-Charge.

Supply, Laying, Testing and Commissioning in trenches or drawn through pipe or fixed on wall / poles LT cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables 25Sqmm 4core (heavy duty) 1100 Volts grade with stranded Aluminium conductor , including disconnecting, dismantling and taking down/out old unserviceable cable ; complete all as specified and directed by Engineer-in-Charge.

Supply, Laying, Testing and Commissioning in trenches or drawn through pipe or fixed on wall / poles LT cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables 10Sqmm 2core (heavy duty) 1100 Volts grade with stranded Aluminium conductor , including disconnecting, dismantling and taking down/out old unserviceable cable ; complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches n. exc 1.5 m wide and n. exc 1.5 m in depth and getting out in hard/dense soil etc ; Complete all as specified and as directed by Engineer-in-Charge.

Returnig, filling in including spreading, levelling, watering and well ramming in layers, n exc 25 cm thick in soil etc ; Complete all as specified and as directed by Engineer-in-Charge.

Removing exacavated soil to a distance n. exc 50 m and depositing where directed at a level n. exc 1.5 m above the starting point etc ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and laying HDPE pipe 40 mm bore light weight with 0.95 gm/cm2 IS: 4984(1995) PN 2.5 for laying of LT cable complete with all accessores etc ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing MCCB Incomer distribution board double door vertical type made out of CRCA MS sheet surface with insulated material like polyester or with epoxy powder coating surface mounting TPN 4 way, 415 volts with copper bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCCB and IP 43 - IK 09 protection with and incl 100 amp 36 kA 4 pole MCCB with thermal - magnetic setting and Icu = Ics = 100% including Suitable type MCB with blank plate including taking down old MCCB ; Complete all as specified and as directed by Engineer-in-Charge. (Note : The cost of removing old wooden/steel box etc and making good of surface as original by brick work, plastering, whitewash/colour/distemper etc is included in quated rate)

Supply and laying burnt brick sub class 'B' modular size, for cable protection laid length wise perpendicular to the axis of cable ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing for wall mounting fan including fitting and fixtures as per site requirement and complete accessories 230 volts single phase 50 Hz AC supply and connecting up with and including two core PVC insulated PVC sheathed copper conductor ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing for Electric Kitchen Modular chimney with stain less steel baffle , filters , touch control penel suitable for mudular kitchen of size 60 cm ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing of single phase call bell ‘DING DONG’, AC 230 volts single pole fixed over and including pressed steel sunk box of size 175 X 100 mm duly covered with 3 mm thick bakelite sheet ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing bell push, flush type, single pole 5 amps ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing metal enclosure (plug & socket type DB) complete including single pole and neutral enclosure with two pin, earth plug and socket complete with one SP MCB C Curve type of capacity 20 Amp, 10 KA ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing MCB single pole, 240 volts, 6 to 32 Ampere, rupturing capacity 10 KA, ‘C’ curve type ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing MCB double pole, 240 volts, 40 to 63 Ampere, rupturing capacity 10 KA, ‘C’ curve type ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing MCB double pole higher rating, 240 volts, 100 Ampere, rupturing capacity 10 KA, ‘C’ curve type ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for sub main wiring with 1100 volt grade two single core FR Wire PVC insulated and unsheathed cable with stranded copper conductor 6 sqmm drawn into and including electrical grade PVC conduit not less than 25 mm dia with IS 9537 (Part-III) 1983 mark, or relevant ISI mark with all accessories fixed concealed including chase cutting in brick/ stone masonry for fixing conduit and making good the disturb surfaces of wall as per existing including 6 sqmm multi - stranded copper conductor as earth wire in green colour ,i ncluding taking down old unserviceable sub main wiring ; Complete all as specified and as directed by Engineer-in-Charge. NOTE: 3 single core 6 sqmm and PVC conduit shall be measured as one Running Metre.

Material and Labour for sub main wiring with 1100 volt grade two single core FR Wire PVC insulated and unsheathed cable with stranded copper conductor 10 sqmm drawn into and including electrical grade PVC conduit not less than 25 mm dia with IS 9537 (Part-III) 1983 mark, or relevant ISI mark with all accessories fixed concealed including chase cutting in brick/ stone masonry for fixing conduit and making good the disturb surfaces of wall as per existing including 10 sqmm multi - stranded copper conductor as earth wire in green colour ,including taking down old unserviceable sub main wiring ; Complete all as specified and as directed by Engineer-in-Charge. NOTE: 3 single core 10 sqmm and PVC conduit shall be measured as one Running Metre.

Supply and Fixing wall /ceiling mounting LED 18 Watt pride plus/smart line tube light fitting complete with all acessories 1x18 Watt LED , with CCT of 6000k suitable for domestic application, 240 Volts, 50 Hz, and internally pre-wired with 1.5 sqmm twin twisted flexible cable copper conductor and connection ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing energy saving new generation 10 watt LED built up, 6000k bulk head luminaire with opal diffuser light fitting ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repairs of security light fitting LED 25 Watt aluminum pressure dia cast housing with touched glass cover IP-66 protection Including suitable size and accessories complete mounted including connection with 3 core PVC insulated overall sheathed flexible cable with muyltistranded copper conductor of size not less than 1.0 sq mm from celing rose to fitting terminal including taking down old CFL security light fitting ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing 50 mm bore light grade galvanised iron tubing with all necessary GI fittings as in protection pipe of cable, fixed to pole or laid under floor / ground / under road crossings for protection of cable ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing for Storage water heater (Geyser) of 25 litres capacity 230V AC, 50HZ having element of 2 KW of COPPER/INCOLOY alloy , Rust proof outer body, high density PUF insulation, BEE 5 Star Rated and above , Inner tank of stainless steel 304 which can sustain pressure of minimum 8 Bar working pressure and having multifunction safety valve, making electric and water connection , with & including fixing of Tee bolts 12mm dia 8 inch long duly grouted in walls , including plug top 3 pin 16 Amp connecting to cable ; complete all as specified and directed by the Engineer-in-Charge.

Supply and Fixing ceiling fan 1200mm sweep with down rod, 240 Volts, white colour, ISI marked BEE 5 star rated with latest BLDC technology complete including fan capacitor, PVC canopy, rubber bush, split pin, hanging clamp, holdfasteners etc ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repairs, installation, commissioning and testing CPRI approved factory made LT feeder pillar box , double door, outdoor ,FRONT& REAR OPENABLE type totally enclosed free pedestal mounting dust and vermin proof, weather proof made out of 1.65 mm thick stainless steel sheet , 304 grade duly powder coated using 7 tank process as per IS: 8623/IEC61439 rated for short circuit rating of 50 KA ,base frame of angle 50mm x 50mm x 5mm,with hinges,door handles (front&rear) suitable for 415 Volts, 3 phase, 4 wire, 50 Hz, AC supply outdoor type complete with and including incoming and outgoing moulded case circuit breakers, aluminium bus bar including internal wiring with not less than PVC insulated unsheathed 2.5 Sqmm multi stranded copper conductor cable,bonding to earth interconnection complete as required and as approved from CPRI ; Complete all as specified and as directed by Engineer-in-Charge with & including the under mentioned accessories :- Incoming (a) MCCB of Cap 400 Amp, 4pole, 36 KA,Microprocessor based,Icu = Ics = Icw ,415 volt, 50 Hz MCCB - 01 Nos Out going (a) MCCB of Cap 200 Amp, 4pole, 36 KA,thermal magnetic release, Icu = Ics = Icw, 415 volt, 50 Hz MCCB - 05 Nos (b) MCCB of Cap 160 Amp, 4pole,36 KA,with thermal magnetic release, Icu = Ics = Icw415 volt, 50 Hz MCCB - 03 Nos (c) Aluminium Bus bar 600 Amps -04 nos covered with sleeves (d) Digital LCD Multifucntion meter,Class. 1 .0 ACCURACY DISPLAYING VOLTAGE ,CURRENT of all type of phase ,FREQUENCY complete with 3 CTs of suitable size -01 No (e) L E D indicating lamps (R, Y & B) PROTECTED WITH 2A SP MCB'S - 01 set of three lamps, Make of LED indicating lamps and MCB (f) EARTHING STRIP OF SIZE 25mm*5mm OF ALUMINIUM RUNNING THROUGHOUT THE LENGTH OF THE SUBJECT L T PANEL Notes :- (i) The Make & drawing of Panel Shall be of approved by the GE before manufacturing of the same. (ii) The rates Quoted shall include for earth work and excavation for angle iron frame for foundation of panel board up to 0.50 m below GL in any type of soil and PCC 1:4:8 type D2 filling in foundation. The ground clearance of panel board shall be 0.40 M from GL to the bottom of panel board.

Supply and fixing in repairs, installation, commissioning and testing CPRI approved factory made LT feeder pillar box , double door, outdoor ,FRONT& REAR OPENABLE type totally enclosed free pedestal mounting dust and vermin proof, weather proof made out of 1.65 mm thick stainless steel sheet , 304 grade duly powder coated using 7 tank process as per IS: 8623/IEC61439 rated for short circuit rating of 50 KA ,base frame of angle 50mm x 50mm x 5mm,with hinges,door handles (front & rear) suitable for 415 Volts, 3 phase, 4 wire, 50 Hz, AC supply outdoor type complete with and including incoming and outgoing moulded case circuit breakers, aluminium bus bar including internal wiring with not less than PVC insulated unsheathed 2.5 Sqmm multi stranded copper conductor cable, bonding to earth interconnection complete as required and as approved from CPRI ; Complete all as specified and as directed by Engineer-in-Charge with & including the under mentioned accesories :- Incoming (a) MCCB 160 Amp, 4pole,36 KA,Thermal magnetic release,Icu = Ics = Icw 415 volt, 50 Hz MCCB - 01 Nos Out going (a) Change over On load 200 A, 4P, 3 phase 415 volt - 01Nos (b) Aluminium BUS BAR SUITABLE FOR 600 Amps ,SIZE 80mm*10mm (R Y B N) COVERED WITH HEAT SHRINKABLE COLOUR CODED SLEEVES (c) Digital LCD MULTIFUNCTION METER,Class. 1 .0 ACCURACY DISPLAYING VOLTAGE ,CURRENT of all type of phase ,FREQUENCY complete with 3 CTs of suitable size -01 No (d) (d) L E D indicating lamps (R, Y & B) PROTECTED WITH 2A SP MCB'S - 01 set of three lamps, Make of LED indicating lamps and MCB (e) EARTHING STRIP OF SIZE 25mm*5mm OF ALUMINIUM RUNNING THROUGHOUT THE LENGTH OF THE SUBJECT L T PANEL Notes :- (i) The Make & drawing of Panel Shall be of approved by the GE before manufacturing of the same. (ii) The rates Quoted shall include for earth work and excavation for angle iron frame for foundation of panel board up to 0.50 m below GL in any type of soil and PCC 1:4:8 type D2 filling in foundation. The ground clearance of panel board shall be 0.40 M from GL to the bottom of panel board.

Supply and fixing in repairs, installation, commissioning and testing CPRI approved factory made LT feeder pillar box , double door, outdoor ,FRONT& REAR OPENABLE type totally enclosed free pedestal mounting dust and vermin proof, weather proof made out of 1.65 mm thick stainless steel , 304 grade duly powder coated using 7 tank process as per IS: 8623/IEC61439 rated for short circuit rating of 50 KA ,base frame of 50mm x 50mm x 5mm,with hinges ,,door handles (front&rear) suitable for 415 Volts, 3 phase, 4 wire, 50 Hz, AC supply outdoor type complete with and including incoming and outgoing moulded case circuit breakers, aluminium bus bar including internal wiring with not less than PVC insulated unsheathed 2.5 Sqmm multi stranded copper conductor cable, bonding to earth interconnection complete as required and as approved from CPRI ; Complete all as specified and as directed by Engineer-in-Charge with & including the under mentioned accesories :- Incoming (a) MCCB of Cap 200 Amp, 4pole,36 KA,thermal magnetic release,Icu = Ics = Icw 415 volt, 50 Hz MCCB - 01 Nos Out going (a) change over ON load 200 A, 4P, 3 phase 415 volt - 01 (b) Aluminium BUS BAR SUITABLE FOR 600 A ,SIZE 80mm*10mm (R Y B N) COVERED WITH HEAT SHRINKABLE COLOUR CODED SLEEVES (c) Digital LCD MULTIFUNCTIONAL METER,Class. 1 .0 ACCURACY DISPLAYING VOLTAGE ,CURRENT of all type of phase ,FREQUENCY complete with 3 CTs of suitable size -01 No (d) L E D indicating lamps (R, Y & B) PROTECTED WITH 2A SP MCB'S - 01 set of three lamps (e) EARTHING STRIP OF SIZE 25mm*5mm OF ALUMINIUM RUNNING THROUGHOUT THE LENGTH OF THE SUBJECT L T PANEL Notes :- (i) The Make & drawing of Panel Shall be of approved by the GE before manufacturing of the same. (ii) The rates Quoted shall include for earth work and excavation for angle iron frame for foundation of panel board up to 0.50 m below GL in any type of soil and PCC 1:4:8 type D2 filling in foundation. The ground clearance of panel board shall be 0.40 M from GL to the bottom of panel board.

Supply and Fixing for bus bar enclosure 800 mm x 600 mm x 200 mm made out of 2.0 mm thick CRCA sheet duly powder coated using 7 tank process with and including 250 amp, 36 kA MCCB 4 pole, thermal magnetic based fitted in bus bar enclosure using 250 Amp rated bus bar, aluminium and RYB indication lamps duly protected by 2A SP MCB outdoor type welded to suitable size MS angle iron frame and embedded in PCC 1:2:4 type B-1 ; Complete all as specified and as directed by Engineer-in-Charge. Note-Height of the enclouser from ground level 0.5 meter

Supply and Fixing for GI earth strip 25x4 mm size with & including GI protection pipe light grade 40 mm bore by means of nuts, bolts, check nuts & washers of galvanised iron or steel ; Complete all as specified and as directed by Engineer-in-Charge.

Supply, Laying, Testing and Commissioning in trenches or drawn through pipe or fixed on wall / poles LT cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables 120 Sqmm 3.5 core (heavy duty) 1100 Volts grade with stranded Aluminium conductor , including disconnecting, dismantling and taking down/out old unserviceable cable ; complete all as specified and directed by Engineer-in-Charge.

M/S RASHPAL CONSTRUCTION CO

M/s. M Company

B.J.CONSTRUCTION CO

ESS KAY BUILDER

S M BUILDERS