Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.3 LAccepted-AOC | L1 | Accepted-AOC Being L1 Bidder | |
| 2 | L2₹44.7 L+₹4.7 L (11.8%)Rejected-AOC | L2 | Rejected-AOC Not L1 Bidder | |
| 3 | L3₹45.4 L+₹5.4 L (13.4%)Rejected-AOC BUILDING NO FLAT NO 19 6TH CROSS ROAD SANJEEVINI NAGAR MUDALAPALYA BANGALORE 560072 | BANGALORE | BANGALORE | KARNATAKA | 560072 | L3 | Rejected-AOC Not L1 Bidder | |
| 4 | L4₹45.5 L+₹5.5 L (13.7%)Rejected-AOC | L4 | Rejected-AOC Not L1 Bidder | |
| 5 | L5₹52.3 L+₹12.3 L (30.8%)Rejected-AOC A 303 VEENA CGHS LTD PLOT NO 5D SECTOR 22 DWARKA NEW DELHI 110077 | NEW DELHI | SOUTH WEST DELHI | DELHI | 110077 | L5 | Rejected-AOC Not L1 Bidder |
Tender Value
₹46.8 L
EMD Value
₹93,600
Closing Date
18 Oct 2022, 6:00 pmClosed
GE U WATER SUPPLY DELHI CANTT 10
GE U WATER SUPPLY DELHI CANTT 10
REPAIR REPLACEMENT MAINT REROUTING OF RISING MAIN AND CI DI GI DISTRIBUTION SYSTEM INCLUDING CONNECTING ITEMS AT 200 DUS OTM I SHANKAR VIHAR OTM II III 180 ORS BANA SINGH ENCLAVE 1 SIGNAL ENCLAVE ANUJ VIHAR YOGINDER VIHAR AND SUBROTO PARK IN THE AREA
2022_MES_553787_1
8222/GE/WS/D-40/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE U WATER SUPPLY DELHI CANTT 10
Please refer Tender documents.
5 documents required · 5 mandatory
₹500
GE U WATER SUPPLY DELHI CANTT 10
₹93,600
Yes
10 Dec 2022
22 Sept 2022
20 Oct 2022
22 Sept 2022
18 Oct 2022
6 Oct 2022
Amount
Excavation in trenches not exc 1.5 M wide and not exc 1.5 M in depth for pipe line, etc in soft/ loose soil getting out and levelling of bottom surface to required level complete all as specified and directed.
Excavation in trenches by cutting of road crossing PCC hard standing for taking out/laying of pipe including making good the existing surfaces with same finish to match the original finish complete all as specified and directed.
Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25 Cm thick soft / loose soil complete all as specified and directed.
Removing excavated material (Soils) from site to a distance not exc 50 M away and depositing where directed at a level not exc 1.5mtr above the starting point complete all as specified and directed.
Boring holes under road pavement by bocky manually in any type of soil upto 200 mm bore complete all as specified and directed.
Taking up or down Cast Iron/Ductile Iron (including all fittings) with spigot & socket ends and lead/tyton joints including burning out lead joints and recovering lead complete all as specified and directed of the following sizes :-
100 mm bore
150 mm bore
200 mm bore
250 mm bore
300 mm bore
Supplying, laying, jointing, testing and commisioning of DI Pipe as per IS 8329-2000, class K-7 with inside cement mortar lining with spigot and socket ends laid in trenches including tyton joint(Rubber gasket joint) all complete all as specified and directed for the following sizes :-
100 mm bore
150 mm bore
200 mm bore
250 mm bore
300 mm bore
Material and Labour for CI/DI fittings/specials such as Tees, bends (any type, radius and angle) tapers any type, collars, tail pieces, caps and plugs of the following sizes confirming to IS: 1538-1993 complete all as specified and directed
100 to 150 mm bore
200 to 300 mm bore
Material & Labour for run lead joint including jointing material for CI/DI Pipe of following sizes complete all as specified and directed.
100 mm bore
150 mm bore
200 mm bore
M&L for excavation in any type of soil through trenchless technology by HDD (Horizontal directional drilling method) including preparing and setting up the plant and equipment. Preparing new pipe work material including all related civil work and mechanical work like excavation, shoring/strutting etc drilling, stringing, reaming and pulling back the new pipe work on the path alignment proper disposal of drilling fluid and ground penetrating radar survey to protect any exiting utilities at the pipe installation location restoration of site agter completion all inclusive as per and STT IS No.2.3.2.2.2.2. second edition 2008 code of pactice for trenchless technology suiting Indian condition for making horizontal bore of size 500mm dia suitable for HDPE pipe insertion under road crossing /hard standing including HDPE pipe 350 mm nominal dia of 28.3 mm min. wall thickness of grade PE 80 for protection of MS/DI pipe to any depth by manually or any means complete all as specified and directed. Note:- (a) MS Pipe/DI will be measured and paid for seprately under respective items. (b) Permission required from civil authrority/department prior to executing the work is the responsibility of contractor and the cost for the same shall be deemed to be included in unit rate quoted by the contractor.
Supplying , laying , jointing, welding & testing MS Pipe, Heavy class 'C' of followiing sizes as per IS 1239-2004 Laid in trenches or laying on floors for connections to centrifugal pump sets or through HDD Pipe under road/path/hard standing, for fresh water supply pipe line, suction of pump set, to header and to connected out going water main CI/DI pipe line, for following size including taking down the u/s one and deoposited to MES Store yard all as directed. Note:- (a) MS Flanges and flanged joints complete with jointing material shall be measured and paid separately. (b) No credit will be available for MS pipe line to be layed through HDD pipe.
100 mm bore
150 mm bore
200 mm bore
Supplying and fixing, MS flanges of 100 mm bore not less than 16 mm thick duly welded on ends of MS pipe complete all as specified and directed.
Supplying and fixing, MS flanges of 150 mm bore not less than 16 mm thick duly welded on ends of MS pipe complete all as specified and directed.
Supplying and fixing, MS flanges of 200 mm bore not less than 16 mm thick duly welded on ends of MS pipe complete all as specified and directed.
M&L for Flanged Joints with rubber or fibre board gasket including nuts, bolts and double washers of following sizes complete all as specified and directed.
100 mm bore
150 mm bore
200 mm bore
Supply, fixing, jointing & testing Cast Iron Sluice Valve of sizes as under, ISI Marked, flanged ends drilled pressure rating PN-1.0, PD Short body, confirming to IS 14846-2000, having stainless steel spindle with cast iron operation wheel at top including taking out unsv sluice valve complete all as specified and directed. Note:- Flanged joints complete with jointing material shall deemed to be included in the unit rate of this item.
80 mm bore
100 mm bore
150 mm bore
200 mm bore
Supply, fixing, jointing and testing of Cast iron Non Return valve without by pass arrangement, swing type, confirming to IS 5312-(Part I) - 1984, flanged ends pressure rating PN 1.0 complete including taking out unsv NRV complete all as specified and directed. Note:- Flanged joints complete with jointing material shall deemed to be included in the unit rate of this item.
80 mm bore
100 mm bore
150 mm bore
250 mm bore
Supply and fixing CI foot valve rating PN 0.2 flanged ends, swing type opration with rubber sheet, as per IS:4038-1986 including taking out unsv foot valve complete all as specified and directed. Note:- Flanged joints complete with jointing material shall deemed to be included in the unit rate of this item.
80 mm bore
100 mm bore
150 mm bore
200 mm bore
Supply, installation and testing of flanged ends water meter ISI marked woltman type, Class 'B' of following sizes and making good connection with flanged ends, with gasket rubber sheet and nut & bolts fixing in horizontal/inclind/vertical position, including taking out unsv water meter complete all as specified and directed. Note :- Flange joints including jointing materials shall deemed to be included in the unit rate of this item.
100 mm bore
150 mm bore
Taking up or down GI steel tubing of following sizes with connections from Trenches/floors/walls complete all as specified and directed
15 mm bore
20 mm bore
25 mm bore
40 mm bore
50 mm bore
Laying tubing GI pipe medium grade IS 1239 (Part I)-2004 marked including all fittings laid in trenches/wall/floor etc in old/new position complete all as specified and directed of following sizes. (Note:- GI pipe shall be issued under Sch 'B' free for fixing/laying only.)
15 mm bore
20 mm bore
25 mm bore
40 mm bore
50 mm bore
Supplying & fixing gun metal gate valves with iron wheel head, screwed both ends for iron pipe, ISI Marked, as per IS: 778-1984 of following sizes including taking out unsv gate valves complete all as specified and directed
15 mm bore
20 mm bore
25 mm bore
40 mm bore
50 mm bore
Labour for cutting of CI /DI/GI/MS pipe in position for reducing to required length for insertion of new tees, branches etc of 100 to 200 mm bore complete all as specified and directed
Taking out foot valve, NRV, Stainer refacing, regrinding, rubber gasket changes, stem nut & bolts and refixing the same serviceable condition with flange joints including nut, bolt and double washers including painting of following sizes complete all as specified and directed
80mm bore
100 mm bore
150 mm bore
200 mm bore
Opening of existing sluice valve 80 mm bore including opening of gland cover taking out with stem nut of brass or of stainless steel & refixing the same after with & including replacement of rubber packing, nut & bolts, glands dori etc complete all as specified and directed. Note :- Any new spare parts like stem, stem nuts, gland plate of required size shall be measured and paid separately under respecitve items.
Opening of existing sluice valve 100 mm bore including opening of gland cover taking out with stem nut of brass or of stainless steel & refixing the same after with & including replacement of rubber packing, nut & bolts, glands dori etc complete all as specified and directed. Note :- Any new spare parts like stem, stem nuts, gland plate of required size shall be measured and paid separately under respecitve items.
Opening of existing sluice valve 150 mm bore including opening of gland cover taking out with stem nut of brass or of stainless steel & refixing the same after with & including replacement of rubber packing, nut & bolts, glands dori etc complete all as specified and directed. Note :- Any new spare parts like stem, stem nuts, gland plate of required size shall be measured and paid separately under respecitve items.
Opening of existing sluice valve 200 mm bore including opening of gland cover taking out with stem nut of brass or of stainless steel & refixing the same after with & including replacement of rubber packing, nut & bolts, glands dori etc complete all as specified and as directed. Note :- Any new spare parts like stem, stem nuts, gland plate of requirearately under respecitve items
Supply only stem nut made out of stainless steel suitable to match with existing sluice valve 80 mm bore complete all as specified and as directed.
Supply only stem nut made out of stainless steel suitable to match with existing sluice valve 100 mm bore complete all as specified and directed.
Supply only stem nut made out of stainless steel suitable to match with existing sluice valve 150 mm bore complete all as specified and directed.
Supply only stem nut made out of stainless steel suitable to match with existing sluice valve 200 mm bore complete all as specified and directed.
Supply only stem made out of stainless steel suitable to match with existing sluice valve 80 mm bore complete all as specified and directed.
Supply only stem made out of stainless steel suitable to match with existing sluice valve 100 mm bore complete all as specified and directed.
Supply only stem made out of stainless steel suitable to match with existing sluice valve 150 mm bore complete all as specified and directed.
Supply only stem made out of stainless steel suitable to match with existing sluice valve 200 mm bore complete all as specified and directed.
Supply only gland plate made of cast iron suitable to match with existing sluice valve 80 mm bore complete all as specified and directed.
Supply only gland plate made of cast iron suitable to match with existing sluice valve 100 mm bore complete all as specified and directed.
Supply only gland plate made of cast iron suitable to match with existing sluice valve 150 mm bore complete all as specified and directed.
Supply only gland plate made of cast iron suitable to match with existing sluice valve 200 mm bore complete all as specified and directed.
Supply, installation and testing flanged ends strainer/dirt box rating PN 10 of following sizes with stainless steel mesh suitable for cold water meter to avoid foreign material entering into meter and making good connection with flanged ends with gasket rubber sheet and nut & bolts fixing in horizontal/inclind/vertical position, including taking out unsv strainer/dirt box complete all as specified and directed. Note :- Flange joints including jointing materials shall deemed to be included in the unit rate of this item.
100 mm bore
150 mm bore
200 mm bore
Supplying, fixing, jointing and testing in replacement of cast iron Air release valve 80 mm bore with two air outlets, confirming to IS , flanged ends complete including taking out unserviceable ARV complete all as specified and directed .
Supplying, fixing, jointing and testing in replacement of cast iron Air release valve 100 mm bore with two air outlets, confirming to IS , flanged ends complete including taking out unserviceable ARV complete all as specified and directed.
Supplying, fixing, jointing and testing in replacement of cast iron Air release valve 150 mm bore with two air outlets, confirming to IS , flanged ends complete including taking out unserviceable ARV complete all as specified and directed.
Material and labour for Fabrication, welding and fixing of MS work made out of MS sheet not more than 3 mm thick of any size or MS angle/flat of any size as required at site for repair/replacement of valve pit cover / Sump manhole cover, stair case steps, sign board and all other iron works including painting two coats with synthetic enamel paints over a coat of red oxide primer complete all as specified and directed.
Labour Only for run lead joint by using old lead and new spurn yarn for CI/DI Pipe of following sizes complete all as specified and directed
100 mm bore
150 mm bore
200 mm bore
Supplying and fixing Digital liquid water level monitor/controller with inovate PIEZO-RESISTIVE linear sensor, non ambiguous display 3 x 1/2 digit (1999 count max) unit option any two of cm,ltrs,percent(%) resolution 0.1 for % and One cm upto 20 mtrs deep tank DATUM level adjustable, power 10-14 VDC ( 5 watts),temp 0.55 degree celcius, relay No 230 VAC, 6 Amp, sensor to tripod to make it fully serviceable/functional by renewal of defective parts, for semi under ground sump after taking down/out as existing at site complete all as specified and directed.
An amount of Rs 371248.00 shall be deducted from BOQ on account of schedule of credit
ASHUTOSH BUILDERS
Rahul Enterprises
Akarsha Enterprises
Ridhi engineers and builders
Microsys Controls India
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .