GE 874/EWS-40/2022-23

Amount

B/R and E/M Portion

Surface excavation n.exc. 30 cm deep and averaging 15cm deep and getting out Soft/loose soil all as directed.

Excavation in trenches n.exc. 1.5m wide and n.exc. 1.5m in depth for foundation etc in hard /dense soil all as specified.

M&L plain Cement concrete as in foundation, filling & mass concrete type D2 1:4:8 using 40 mm graded aggregate all as specified.

M&L Brick work with sub class 'B' brick straight or curved on plan exceeding 6 mean radius built in cement mortar 1:4 all as specified.

M&L brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4.

M&L for walling of random rubble masonry, well bonded, bedded and solidly hearted, built in cement mortar 1:6.

All as per item Above but except stone.

Returning and filling including spreading leveling watering and well ramming in layers n.exc 25 cm in hard/ dense soil all as specified.

Removal of excavated materials not exc 50cm and depositing where directed at a level n.exc 1.5m above the starting point all as specified.

M&L Mild Steel TMT bars 10mm dia and over cut to length, bent to shape required including cranking, bending, spirally for hooking for column, hooking ends and binding with MS wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to FS-410 all as specified.

M&L TMT bars 5mm dia and over upto including 10mm dia in stirrups spaces and binders cut to length bend to shape required including mild steel wire ( annealed) not less than 0.9 mm dia all as spd and directed.

Formwork to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.

M & L for rendering 15 mm thick on Brick masonry surfaces or surfaces other than fair face of brick work in cement mortar 1:4, finished even and smooth without using extra cement.

M&L for rendering 10mm thick cement mortar 1:6 as in internal Plastering to fair face of brick masonry walls and finished even & smooth without using extra cement.

Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any color having tensile strength of 550Mpa as in roof covering /cladding to wall , fixed with self tapping screws as specified.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M & L two coats of cement based paint on external wall surfaces over a coat of primer including preparation newly plastered surface complete all as specified.

M&L for Preparation new or undecorated surface of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specifed and as directed.

M&L for preparation of new or undecorated surfaces of wall and applying 3 mm thick wall care putty and rubbing with sand paper to achieve a level and smooth to wall and applying two coats of acrylic distmper over a coat of primer complete all as specified and as directed.

M&L Moorum/red bajri / sand filling in floors or paving, laid in layers n.exc. 15 cm thick, spread, leveled and rammed including watering.

M&L hard core filling under floor, with broken stone or boulder exc 63mm and n.exc 100mm gauge of sand stone complete all as specified.

M&L for 75mm thick PCC type D2 1:4:8 (40 mm graded crushed stone agg) as in sub base of floor.

M&L Chequered cement concrete tiles 20cm x20cmx25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment over 20mm thick screed bed or bedding layer in CM 1:6 as in floor complete all as specified and directed by Engr-in-Charge.

M&L for 75mm thick PCC type C2 1:3:6 (40 mm graded crushed stone agg) as in sub base of floor.

M&L for 40mm thick PCC type B1 1:2:4 (20 mm graded crushed stone agg) as in sub base under floor.

M&L for colored glazed ceramic tiles 350x 250x 7 mm/ 450X 350X 7mm thick as in vertical surfaces such as skirting, dados etc jointed in neat cement slurry and pointed in white or colored cement to match, set and jointed in neat cement slurry and over 15mm thick backing coat in cement mortar 1:4 laid, complete all as specified and directed.

M&L Non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm and n.exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or colored cement to match over 15mm thick screed bed in cement mortar 1:4 laid over and including 25mm thick PCC 1:2:4 type B1 using 20 mm graded crushed stone aggregate, complete all as specified and directed.

M&L of Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile on 15mm thick screed bed in CM 1:4 over 25mm thick PCC 1:2:4 type B0 (using 12.50mm graded crushed stone agg) complete all as specified and as directed.

M & L for second class soft wood plain, solid straight chowkhat and frames, wrought framed rebated on the solid rounded or chamfered, put together with glue penned and joints.

M&L 30 mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats.

S & F glazed & skeleten shutters 35mm thick 2nd class softwood, open rebated and prepared to receive glass, gauze, etc, edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part I Section 8 clause 8.24 (a) fitted to chowkhats.

S & F glazed & skeleten shutters 30mm thick 2nd class softwood, open rebated and prepared to receive glass, gauze, etc, edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part I Section 8 clause 8.24 (b) fitted to chowkhats.

S&F soild PVC door frame of size 50mm x 47mm made out of 5mm plaint color PVC sheet reinforced with MS square tube, and fitted in opening all as specified.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & Bottom rails. MS frames shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement.

S&F Sheet glass ordinary quality 4mm thick, glazing with oil putty or wooden beads in squares not exceeding 0.50Sqm in each pane, in repairs, complete all as specified and as directed.

S & Fixed in repairs Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and as directed.

Mild steel butt hinge medium weight cold rolled 100mm size.

S&F MS butt hinges 75mm long medium weight.

S & F 300mm long aluminum alloy anodized sliding door (bolt type) and fixing clips of sheets, cast of extruded sections and fixing bolts and sliding bolts of extruded section of cast-aluminum alloy.

S&F 150mm Aluminium anodised, barrel tower bolts of extruded section and fixed

S&F 100mm Aluminium anodised, barrel tower bolts of extruded section and fixed

S&F 75mm Aluminium anodised, barrel tower bolts of extruded section and fixed

S & F aluminum handles, cast type, anodized 150mm long.

S&F Aluminium handle, cast type, anodised 100 mm long.

S&F 300mm, MS ordinary rat tailrod pattern springs including roller and roller plate complete

S& F floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel pin fixed to door, over all length 140 mm.

50 mm thick PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection, surfaces finished even and fair using extra cement, complete all as specified and directed.

S&F rotational moulded polythene water storage tank (Cylindrical vertical withclosed top)hoisted and fixed in position of 1000 ltrs capacity fixed with PVC tank nipples, complete all as specified in SSR Part I.

S&F rotational moulded polythene water storage tank (Cylindrical vertical withclosed top)hoisted and fixed in position of 500 ltrs capacity fixed with PVC tank nipples, complete all as specified in SSR Part I.

S&F PTMT ball valve high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule 20mm dia.

Taking up or down 15mm dia GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 20mm dia GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

S&F steel water tubing of nominal bore dia 15mm medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engr-in-Charge.

S&F steel water tubing of nominal bore dia 20mm medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engr-in-Charge.

S&F Vitreous China Wash down water closet pan (Pedestal pattern), white incl plastic water closet seat and cover closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device & incl P or S trap and connection to trap and to the flushing system anti syphonage pipe etc (excluding flushing cistern and flush pipe) complete all as specified and as directed

S&F vitreous china squatting pan 'Orissa' pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing system anti syphonage pipe etc complete all as specified and as directed.

S&F 20 mm bore Gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed.

M & L for Vitreous china wash basin, vertically mounted fancy bowl flat back size 550 x 400 m including waste pipe and coupling 32mm for basins, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed including MS brackets& waste Pipe complete.

S & F Vitreous China Urinal, Half stall type, white with grating and union for discharge pipe including providing and fixing plugs with and including 60mm long brass screws, pointing around urinal back in cement with PVC 32mm dia waste pipe & waste coupling incl spreader complete all as specified.

S&F PVC valve-less symphonic action type flushing cistern, low level white with inlet ball valve float and handle incl brackets 10 Ltr capacity fixed in repair complete all as specified and directed.

Soap dish, vitreous China white, approximate size 160x 160x90mm.

S&F PVC connection 15mm dia and 450mm long with PTMT nuts and washer complete all as specified.

Stop valve 15mm bore, cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions.

M & L for CP Pillar taps, with capstan head chromium plated 15 mm bore fancy type.

Bib tap cast copper alloy with crutch of butterfly handle, screwed down, screwed for iron pipe of for brass ferrule of 15mm bore (ISI marked).

Bib tap cast copper alloy chromium plated fancy type with crutch of butterfly handle, screwed down, screwed for iron pipe of for brass ferrule of 15mm bore (ISI marked).

M&L Brass CP Basin mixer for mixing hot & cold water screwed down for iron pipe 15mm dia complete all as specified and as directed.

S&F in repairs two way bib cock 15 mm chromium plated complete all as specified and directed.' Make: ESSCO or its equivalent

S&F in repairs health faucit (hand shower) cromium plated complete all as specified and as directed. Make : Jaquar or its equivalent

Dismantling of rain water pipe and sewage line pipe of any type and any size including fitting complete all as specified and as directed.

S&F PVC (SWR) floor trap 75mm dia outlet, plain with grating including jointing with solvent cement

S&F 75mm bore PVC (SWR) pipe single socket in any length with rubber ring jointed, fixed to wall complete all as specified.

S&F 110mm bore PVC (SWR) pipe single socket in any length with rubber ring jointed, complete all as specified.

S&F 110mm bore PVC (SWR) bend or tee or radius complete all as specified.

S&F 110mm bore PVC (SWR) bend or tee or radius with oval access door complete all as specified.

S&F 75mm bore PVC (SWR) bend or tee or radius with oval access door complete all as specified.

S&F PVC (SWR) reducers any radius 110mm bore

S&F 110mm bore PVC (SWR) junction, single (single T) equal or unequal with door access

M&L for PVC (SWR) vent cowl for 75 mm dia all as specified.

S&F Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed

S&F Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union

S&F ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia all as directed.

Construction of 25 users septic tank (brick construction) including inlet and out let chamber with top of slab at ground level including necessary earth work and disposal of surplus soil to a distance not exceeding 50m supplying and placing vent pipe, in position to manhole cover brick construction and all other relevant works, complete, all as specified and shown on drawing No CESZ/TD-01/2015 Sheet 1/1&1/2 dated 22 Feb 2015 and revised on 06/06/15.

Construction of Soakage well, excavation in ordinary soil, foundation in PCC 1:3:6, Wells of honey combed and solid brick work in CM, RCC cover slab in , filling with brick bats complete of size 1.20 m dia x 3.0m deep all as specified and shown on drawing No CESZ/TD-01/2015 Sheet 1/3 dated 22 Feb 2015 and revised on 06/06/15.

Plain cement concrete bed 1:3:6 type C-2 using 40mm graded stone aggregate to drain pipes of 150mm bore including packing under hunching against the site of pipe after they are laid and tested.

S&F Salt Glazed stone ware drain pipes of 150mm bore laid in trenches and jointed on concrete bed complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving n.exc 15 cm thickness.

Dismantling of timber scantlings 40 sq cm and over in section in any position in unframed work.

M &L for second class soft wood as in scantling clean sawn fixed in position.

M & L for second class soft wood as in scantling clean sawn fixed in position but except wood.

Dismantling of boarding, any description, fixed in any position with nails(in floor etc)

M & L for 2nd class softwood weather boarding clean sawn, plain 20mm thick or feather edge 15mm to 20mm thick and fixed with 30mm laps.

All as per item Above but fixing only.

S&F 20mm thick 2nd class softwood boarding , planed one side , with butt joints and fixed with nails in facia eaves boarding complete all as specified and direced by Engr-in-Charge.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets.

M&l for plywood, grade BWR, type BB, fixed with nails to timber frame work as in ceiling 6mm thick all as specified.

M&l for plywood, grade BWR, type BB, fixed with nails to timber frame work as in wall lining 6mm thick all as specified.

M&l for plywood, grade BWR, type BB, fixed with nails to timber frame work as in wall lining 6mm thick Except plywood all as specified.

M&L 6 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with nails to timber frame work as in ceiling.

M&L 6 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with nails to timber frame work as in wall.

Plain fillet, square, rectangular or triangular in section, clean sawn exc 3 Sqcm sand not exc 6 Sqcm secured with nails.

Taking down cement plaster on brick or stone walls including racking out joints, hacking for key scrubbing down with water etc.

Dismantling plain or corrugated steel sheeting any gauge thickness in roof covering.

Taking down chowkhats or frame exe. 1.5sqm and n.exc. 4 sqm each with shutter (without taking out shutter).

Taking down chowkhats or frame not exc 1.5 Sqm each ( without taking off shutters from the frame).

Taking down shutters of any description not exc 1.5 Sqm each.

Hacking out old broken glass (any thickness size quality or description) from wooden frame glazed with putty or wooden beads.

S&F frosted or grouded/obscured type sheet glass, 3mm thick and glazing with oil putty in squares n.exc 0.5 Sqm in each pane complete all as specified and as directed

S&F galvanised mild steel wire cloth .56mm nominal dia of wire and average width of aperture 1.18mm including fixed in repair all as specified.

M & L for applying two coats of synthetic enamel point over a coat of pink primer including preparation of new wooden surface exc 10 cm width or girths.

M & L for applying two coats of synthetic enamel point over a coat of pink primer including preparation of old wooden surface exc 10 cm width or girths.

Demolition of Brick/stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashler facing, dressed stonework and precast concrete articles

M&L Reinforced cement concrete Type B1 1:2:4 (using 20 mm graded aggregate, Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and directed.

M&L formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) all as specified and directed.

Taking down copper/aluminium point wiring ( light fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) asd making good distribued surface of wall , floor etc complete all as specified and directed.

Point wiring for one light point/Ex/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi strand cable and 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi stranded cable (green color) as earth lead in and including cable 1100 volts grade including 25mm casing and capping (ISI marked) for one light/ fan point controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified.Make : Finolex/Anchor/Polycab

Point wiring for 3 pin 5A socket outlet independent point controlled by one switch with 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi strand cable and 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi stranded cable (green color) as earth lead, 1100 volts grade including 25mm casing and capping (ISI marked) for one light/ fan point controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified.Make : Finolex/Anchor/Polycab

Point wiring for 3 pin 5A socket outlet on the same board controlled by one switch with 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi strand cable and 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi stranded cable (green color) as earth lead, 1100 volts grade including 25mm casing and capping (ISI marked) for one light/ fan point controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified.Make : Finolex/Anchor/Polycab

Point wiring for one 3 pin 15 Amps socket outlet/sheet metal enclosure independent with 4.00 sqmm PVC insulated un-sheathed copper conductor single core multi strand cable and 2.5 sqmm PVC insulated un-sheathed copper conductor single core cable (green color) as earth lead in and including 25mm PVC caping casing medium grade with all fittings (ISI Marked) controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified.Make : Finolex/Anchor/Polycab

M&L for LED Batten 1x20 W for regal batten for LED Universal batten for G 13 T with 18 W tube rods and Ultra bright LED Polycarbonate tube light very high efficiency suited for installation in existing T8 and connecting electrically using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core all as required at site or directed by Engineer-in-Charge.Make :Havells Batten Cat part No LHFYBYG21N1W020 and LED Tube Rod Cat part No LHLDCLXNUL8X018 or Equivalent.

Supply & fixing Switch piano type flush 6 Amp Single pole one way ( ISI Marked) complete all as specified and directed. Make : Havells/Anchor

Supply & fixing Switch socket combination 2 in 1, 5 and 6 Amp Modular type universal controlled by one switch (ISI marked) complete all as specified and directed. Make : Havells/Anchor/Philips

Supply & fixing Switch socket combination 5 in 1, 5 and 15 Amp Modular type universal controlled by one switch (ISI marked) complete all as specified and directed. Make : Havells/Anchor/Philips

House service bracket (hook type), complete, with 3m long GI pipe 40mm dia medium grade, two Nos 90 degree bend, MS hook and guy or stay, complete all as specified. Make: Havels/Anchor/Polycab/SSK.

Supply & Fixing ceiling rose surface backelite 65x50mm two to three terminal (ISI marked).Make : Havells/Anchor

Supply and fix LED Bulb 9 Watt. Make Havells/Bajaj.

S&F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and as directed.

Supply & fix sheet metal enclosure MCB distribution board. Single pole & neutral 240 volts 8 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, conf to Cat Pt No 6077 11 of Legrand or equivalent of make Hager/Merlin Garin fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification .

Supply & Fixing RCBO, single pole and neutral (SPN) 30mA, 240V , 32 Amp all as specified and directed. Make- Havelles/MDS/Legrand.

Supply and fixing MCB SPN 40 AMP amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning

Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning.

S&F 1100 volt grade heavy duty cable PVC insulated multistranded aluminum stranded conductor served with PVC tape and over all PVC sheathed in service connections suspended by insulating hangers not more than 1 mtr apart including 4mm dia GI suspension wire one twin core cable flat of circular of size 10 Sqmm complete all as specified and as directed by Engr-in-Charge. Make : Havells/Anchor/Polycab/Plaza.

Earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron earth lead strip 32x6mm by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 3 of 2009 SSR Pt-I and testing complete including earth work in any type of soil, PCC 1:2:4 type B-0 as in earthing pit and cover 55mm thick reinforced with XPM (weight not less than 4.0Kg/Sqm) common salt, charcoal and testing on completion, all as specified and directed.

Storage water heater (Geyser), vertical type, of 25 ltr capacity of inner tank, outer tank, syphon assembly, thermostat heating element, safety valve etc complete all as per manufacturer design and specifications including making of all fixing arrangements complete having BEE Five Star Rating including grouting of nuts and bolts and necessary PCC work as specified and directed by Engineer-in-Charge. Make : Havells model Monza DX HSN code 8516 or equivalent as approved by Engr-in-charge.

M/S BEE AAY CONSTRUCTIONS

M/S SHAMAS PARWAIZ BHAT

Bidder Name

RATHER BROTHERS

M/S SHAMAS PARWAIZ BHAT

M/S BEE AAY CONSTRUCTIONS