Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹30.3 LAccepted-AOC | L-1 | Accepted-AOC Lowest qualified bidder. Hence being awarded. | |
| 2 | L-2₹31.7 L+₹1.3 L (4.35%)Rejected-AOC RAMNAGAR COLONY RAJURA DIST CHANDRAPUR 442905 | RAJURA | CHANDRAPUR | MAHARASHTRA | 442905 | L-2 | Rejected-AOC Not a qualified L1 bidder | |
| 3 | L-3₹33.5 L+₹3.2 L (10.6%)Rejected-AOC 28 1 SEMRA DAMMAN BARGAON GONDA RAILWAY STATION GONDA UTTAR PRADESH 271002 | GONDA | UTTAR PRADESH | 271002 | L-3 | Rejected-AOC Not a qualified L1 bidder | |
| 4 | L-4₹34.6 L+₹4.3 L (14.2%)Rejected-AOC AADINATH ENTERPRISES VARDHAMAN AUTOMOBILE BYE PASS ROAD BENGALI CAMP CHANDRAPUR 442401 | CHANDRAPUR | CHANDRAPUR | MAHARASHTRA | 442401 | L-4 | Rejected-AOC Not a qualified L1 bidder | |
| 5 | L-5₹36.8 L+₹6.4 L (21.2%)Rejected-AOC | L-5 | Rejected-AOC Not a qualified L1 bidder |
Tender Value
₹44.4 L
EMD Value
₹55,600
Closing Date
20 Jan 2025, 3:25 pmClosed
Shri. Nitin Naik
OFFICE OF THE AREA GENERAL MANAGER WCL BALLARPUR AREA P.O. SASTI TA. RAJURA DIST. CHANDRAPUR (MS) PIN 442905
Construction of 2 no. Cement concrete roads at SASTI VILLAGE 236m and 334m length under CSR under Sasti Sub Area
2025_WCL_325435_1
wcl-ba3650-civ-e131-24-25/556
Open Tender
Civil Works - Roads
Item Rate
60 days
WCL Ballarpur Area
As per NIT
4 documents required · 4 mandatory
₹55,600
7 Feb 2025
10 Jan 2025
21 Jan 2025
10 Jan 2025
20 Jan 2025
10 Jan 2025
10 Jan 2025 - 17 Jan 2025
Amount
Excavation in Soil using Hydraulic Excavator and Tippers with disposal upto 1000 metres . Excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location with all lifts and lead upto 1000m as per relevent clauses of section-300 of specification.
Construction of granular sub-base by providing well graded material like natural sand crushed gravel or crushed stone having CBR >30, preading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator or plant mix method at OMC, and compacting with vibratory rollers of 80 to 100 kN static weight to achieve the desired density, complete as per Clause 401 of Specification. Plant Mix Method For Grading-I Material
Construction of granular sub-base by providing well graded material like natural sand crushed gravel or crushed stone having CBR >30, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator or plant mix method at OMC, and compacting with vibratory rollers of 80 to 100 kN static weight to achieve the desired density, complete as per Clause 401 of Specification. Plant Mix Method For Grading-III Material
Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8- 10 tonnes vibratory roller, finishing and curing as per clause 601 of specification complete in all respect.
Construction of un-reinforced, dowel jointed, plain cement concrete pavement M-30 grade concrete over a prepared sub base with cement , coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, admixtures as approved, curing compound, finishing to lines and grades as per drawing as per IRC 15 2011 and as per relevant clauses of section 602 of specifications complete but including cost of steel in dowel bar and tie rods etc.
Total impact of GST for the purpose of CTC
RINKI MISHRA (BID ID -1118838)
MANGAL ENTERPRISES (BID ID -1118430)
Sandeep Jain (BID ID -1118982)
M A SIDDIQUEI (BID ID -1119104)
Daulat Construction (BID ID -1117847)
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .