Loading
Loading…
Loading…
Tender Value
₹76.2 L
EMD Value
₹1.5 L
Closing Date
25 Jun 2026, 11:00 pmClosed
Bangalore Metropolitan Transport Corporation
S Vani
Development works to TTMC at Yeshwanthapura, Bengaluru
BMTC/2026-27/BD/WORK_INDENT220/CALL-2
BMTC/2026-27/BD/WORK_INDENT220/CALL-2
Open
Buildings
Two Tender Document System(Two Cover)
Bangalore Metropolitan Transport Corporation Office Bengaluru
6 documents required · 6 mandatory
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
Should be valid registered Civil Contractors / Firms in Karnataka CPWD/MES/KPWD
Work-done Certificate for having satisfactorily completed as a prime contractor at least one similar nature of work, i.e., Building work not less than 50% of amount put to tender i.e., Rs. 38.15 Lakhs in last previous five years in any of the Government / Public Sector Undertaking (i.e, 2021-22, 2022-23, 2023-24, 2024-25 & 2025-26 till date)
Executed in any one year (for a continuous period of 12 months) during the last five years (i.e., 2021-22, 2022-23, 2023-24, 2024-25 & 2025-26 till date) the following minimum quantities of work in any of the Government / Public Sector Undertaking.Painting :- 15340.00 Sqm, Waterproofing :- 800.00 Sqm, MS Grill work:- 2000.00 Kgs and Waterproof treatment to expansion Joint: 152.00 Mtrs
Should have achieved in at least two financial years a minimum annual financial turnover (in all classes of electrical works only) of not less than the amount put to tender out of the last five financial years (2021-22, 2022-23, 2023-24, 2024-25 & 2025-26). ie, Rs. 76.30 Lakhs. Up load a copy of audited profit/loss statement duly certified by chartered accountant only
Liquid assets and availability of credit facilities of not less than 30% of the equivalent of the amount put to tender. ie, Rs. 22.90 Lakhs. Up load a copy of Credit Lines / Letters of Credit / Certificates from any Nationalised / Scheduled Banks (Name of the particular work should be indicated in the line of credit) as per the prescribed format
Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be uploaded as per the prescribed format only.
₹1,910
₹1.5 L
18 Jun 2026
18 Jun 2026
29 Jun 2026
24 Jun 2026
Development works to TTMC at Yeshwanthapura, Bengaluru
Earth work excavation by manual means for drains,canals, waste weir,draft, approach channels, key trenches, foundation of bridges andsuch simillar works in all kinds of soils , as per drawing and tech...
Providing PVC ringtite pipes conforming to IS 4985:2000 with latestamendments and conveying to worksite, rolling and lowering intotrenches, laying true to line and level and perfect linking at joints,...
Providing PVC ringtite pipes conforming to IS 4985:2000 with latestamendments and conveying to worksite, rolling and lowering intotrenches, laying true to line and level and perfect linking at joints,...
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensi...
Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...
Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and sid...
Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing ...
Providing and Applying PU based Elastomeric Liquid Applied PUWaterproofing Membrane single component, cold applied, water based acrylic PU dispersion with highly elastic and UV resistant water proofin...
Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of appr...
Repairs to plaster in patches of 2.5 Sqm and less in walls, ceilings 10 to 20mm thick in cement mortar 1:3 including cutting the patches in proper shape and replastering the surface of the wall includ...
Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour.P- 137/14.36.2 of vol 2 Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less th...
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.P- 136/14.28.1.1of vol 2
Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete :White solid plastic seat with lid P- 135/14.20.1 of vol 2
Providing and fixing chromium plated brass handles of 100/125 mm withnecessary screws etc. completeP - 105/ 12.62 of Vol 2
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodiccoating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc....
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 P-119/13.12 of vol 2
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. P-119/13.15 of vol 2
Providing and fixing PTMT, push cock of approved quality and colour.15 mm nominal bore, 80 mm long, weighing not less than 46 g P- 120 /13.21.2 of vol 2
Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.P- 121 /13.27.2 of vol 2 15 mm nominal bore with 450 mm length
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe ...
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 25 mm Nominal bore No 25 MM Dia. Vol-02 P-117/13.4.1
Repairing and fixing shutters (panelled or glazed) to doors, windows, ventilators and cupboards Vol- 2 P-207/20.104
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...
Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces :Two coats with paint of approved quality to give...
Painting with Silicon & Acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces :One coat with paint of approved quality to give ...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Finishing walls with Premium Acrylic Smooth exterior paint of required shade : Old work (Two coats applied at 1.43 l/ 10 Sqm) over existing cement paint surface including preparing the surface after t...
Finishing walls with Premium Acrylic Smooth exterior paint of required shade : Old work (Two coats applied at 1.43 l/ 10 Sqm) over existing cement paint surface including preparing the surface after t...
Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tan...
Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...
Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material to the appropriate disposal area as per direction of Engineer-in-charge.P- 191/19.41.2 of V2
Constructing brick masonry chamber of internal dimension 600x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Providing & fixing RCC Pre-cast Cover Slab of size 0.8 m x 0.8 m x 0.15m of Sqm5-Design mix concrete with 12 mm steel at 120 mm c/c both ways, over Gate valve extension spindle with central opening al...
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6...
Providing and fixing Multijet class B inferential type, AMR compatible water meters with IP 68 protection totalizer confoming to IS 779 with its latest amendments of following size to service connecti...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Providing and fixing in position 12mm thick plaster of paris (Gypsum anhydrous) for ceiling reinforced with hessian cloth flat surface with ceiling tiles up to a height of 5 m above floor level over a...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Iv...
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), includi...
Melamine polishing on wood work (one coat) including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per ...
Dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of Engineer-in-charge. For thickness of tiles 10 mm to 25...
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 Percentage and conforming to I.S. 15622, of approved make, in ...
Providing waterproof treatment to Expansion joints using 2 coats of acrylic co-polymer elastomeric sealer and protector. The surface shall be prepared free of tar, dust, fungus, loose particles etc. T...
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders wi...
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually c...
Removing & Resetting existing Heavy Duty Cobble/Interlocking stones/Pavers of thickness 60/75/80/100mm using Cement and 40mm thick sand bed ( average thickness ) and compacting with plate vibrator to ...
Removing of existing old or broken wash basin / urinals/ Indian Water closet/ European Water closet and disposing it with all cost and conveyance labour for all items of work, HOM with all lead and li...
Providing and fixing Pillar Cock made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class. P-138/14.48/V2
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 g.P-119/13.14/V2
Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour.25mm nominal bore, weighing not less than 62 g, P-121/13.28.3/V2
Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks, P-123/13.36/V2
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular...
Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2" BSP thread and shapes, weighing not less than 60 g.P-137/14.42/V2
Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, P-134/14.8.1/V2
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting,unloading to approved municipal dumping ground or asapp...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 Percentage) total coated thickness with zinc coat...
Providing and laying 25 mm thick mastic asphalt wearing course with paving grade bitumen meeting the requirements given in table 500-29, prepared by using mastic cooker and laid to required level and ...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/Cum and minimum compressive strength of 4.00 N/mSqm conforming to IS...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Tender Notification_Yeshawanthapura TTMC_Call2.doc
Others - Tender Notification • 0.13 MB
Tender_Format_EC.docx
Others - TENDER FORMAT • 0.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .