WBPHED/AE/BMSD/NIeT- 3 OF 2024-2025/13

Amount

Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. a) Depth of excavation not exceeding 1,500 mm

Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work)

Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. a) Pakur Variety

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups binders etc. including supply of rods initial straightening and removal of loose rust ( if necessary ) cutting of requisite length ,hooking and ben a) For works in foundation basement and up to roof of ground floor / up to 4 meter. i) Tor steel/Mild steel. ( SAIL/ TATA/ RINL)

Brick work with 1st class bricks in cement mortar (1:4) (a) In superstructure, ground floor

Plaster ( to wall, floor , ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and racking out joints or roughening of concrete surface including throating nosing and drip course where necessary (Ground floor).[Excluding cost of chipping over concrete surface] a) With 1:6 Cement mortar ( 25mm thick )

M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete. a) Span up to 12 Mt

Supply, Delivery & fitting fixing of nomenclature made from imported acrylic sheet letter of different sizes with Matal colours as per choice of EIC with Aluminium sandwich Panel. The subject matter as directed by EIC shall be fixed on above iron structure including all necessary work to complete the fabricated work including supplying all required material. Colour type and colour letter & graphics will be as per direction of EIC. Size-20ft x 8 ft ( Approx) Matter- Government of West Bengal Office of the Executive Engineer Bankura Mechanical Division Public Health Engineering Directorate Ailakundi, Kenduadihi, Bankura – 722102.

Supply delivery fitting fixing Gate light Post top lantern withReliable and aesthetically designed IP65 post top lantern with symmetric light distribution. cover with lamp complete set. type-BGP200 LED45 CW PSU GR CPC SPD (Make -Philipsequivalent model)

Supply and delivery of out door type LED Spot 220-240V, 50/60 Hz, 30 watt capacity with diecast aluminum housing and stainless trim, waterproof Glass Cover with IP 68 protections. Model No-BVP102 LED30 CW FG GR PSU for Philips Make- Philips/any other approved make

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection A) 16 A (SP) Make-Havels [2nos internal light & 2nos out door light]

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment a) 2+4 way Make-Havells Enclosure (DHDPSNODRW04)

Supply and delivery of 4 sq.mm. 2core XLPE insulated Ar. AL conductor cable, As Per IS-7098 (Part 1) 2011 with Up To Date Amendment

Supplying and Fixing GI water proof looping cable box having hinged GI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the following sizes as indicated below, Comprising of one 250 V, 15 A Kit-Kat fuse unit, one NL on porcelain insulator etc. and housing the same in pole muffing incl. addition and alteration to the existing CC muffing (6:3:1) after dismantling the damaged looping cable box etc. where necy. incl. painting i) 250 x 250 x 100mm

Laying through Underground Trech Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed

Laying on Wall / surface with Saddles / Clamps Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F M S saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

Fitting & fixing of outdoor LED light/Gate light with all accessories to be fixed/projected from the wall of the building incl. making holes to building, with supplying all necy fitting & making necy. connections as per direction of E.I.C

Add: 18% GST

Add: 1% Cess

M/S NABIN GOPAL SENGUPTA

TAPAN KUMAR SARKAR