REPAIR/MAINT OF DOOR, WINDOW, ALMIRAH ETC IN T-WING AND G-WING AREA UNDER AGE B/R-II GE BABINA

Amount

S&F in repair of extruded Aluminum anodised handles 150 mm long, fabricated type, complete all as specified and directed.

S&F in repair of extruded Aluminum anodised handles 200 mm long, fabricated type, complete all as specified and directed.

S&F in repair of Aluminium anodised barrel tower bolts 150 mm long of extruded section, complete all as specified and directed.

S&F in repair of Aluminium anodised barrel tower bolts 200 mm long of extruded section, complete all as specified and directed.

S&F in repair of 16mm dia Aluminium anodised sliding door bolts with hasp and staple (bolt type) and fixing clips of sheets,cast or extruded type 300mm long, plate type, complete all as specified and directed.

S&F in repair of Aluminium anodised 100mm long hasp & staple type, incl bolt to hinge plate and fix with screws complete all as specified and directed.

S&F in repair of Aluminium anodised floor door stopper 140 mm with hard drawn steel spring long, complete all as specified and directed.

S&F in repair of Butt hinges, 75 mm size, medium weight, cold rolled mild steel, complete all as specified and directed.

S&F in repair of Butt hinges, 100 mm size, medium weight, cold rolled mild steel, complete all as specified and directed.

S&F in repair of Butt hinges with galvanised MS hinge pin, 100 mm size, aluminium anodised extruded, B-21 type, complete all as specified and directed.

S&F in repair of MS ordinary rat tail rod pattern springs of size 300mm incl roller & roller plate, complete all as specified and directed.

S&F in repair of wooden bright polished Cup board knobs, 40mm dia size with nut, screw & washer, complete all as specified and directed.

S&F continuous (piano) hinges, mild steel bright finish in electro galvanized width of flat (when open) in 30mm, complete all as specified and directed.

S&F in repair of magnatic catcher for cupboard and kitchen cabinets, complete all as specified and directed.

S&F in repair of Aluminium anodised hat and coat hooks (pegset), solid body,175mm to 250mm with 6 hooks, complete all as specified and directed.

S&F in repair EPDM rubber gasket /Glazing bead packing around the glass complete all as specified and as directed.

S&F in repair SS wire cloth 0.63 mm nominal dia of wire and average width of apperture 1.40mm and fixed with stainless steel staples in steel/wooden /aluminium frames complete all as specified and as directed by the Engr-in-Charge.

S&F in repair 3mm thick sheet glass ordinary quality and glazing type, not exc 0.50 sqm in each pane, after and including hacking out broken glass from wooden/metal surfaces complete all as specified and as directed by the Engr-in-Charge.

S&F in repair 3mm thick firured glass, pin headed type and glazing with oil putty in squares n. exc 0.5 sqm in each pane after and including hacking out broken glass from wooden/metal surfaces complete all as specified and as directed by the Engr-in-Charge.

S&F for 4 to 5mm thick Sheet glass of size exc. 0.5 Sq. m each pane, ordinary quality duly covered with tinted solar control film 25 micron, including jointing cleats, glazing clips, rubber packing, aluminium anodised snap beading, screws,each pane after and including hacking out broken glass from wooden/metal surfaces complete all as specified and as directed by the Engr-in-Charge.

Refixing in the same opening of door/window/cupboard wooden shutter of any description With or without taking down area not exceeding 1 Sqm each including easing and adjusting as required complete all as specified and as directed by Enineer-in-charge

Refixing in the same opening of door/window/cupboard wooden shutter of any description With or without taking down area exceeding 1Sqm and not exceeding 2 Sqm including easing and adjusting as required complete all as specified and as directed by Enineer-in-charge

Refixing in the same opening of door/window/cupboard wooden shutter of any description With or without taking down area exceeding 2 Sqm including easing and adjusting as required complete all as specified and as directed by Enineer-in-charge

Refixing in the same opening of aluminium door/window of any description With or without taking down area not exceeding 1 Sqm each including easing and adjusting as required complete all as specified and as directed by Enineer-in-charge

Refixing in the same opening of aluminium door/window of any description With or without taking down area exceeding 1Sqm and not exceeding 2 Sqm including easing and adjusting as required complete all as specified and as directed by Enineer-in-charge

Running welding in repairs not exc 6mm thickness of metal to be welded complete all as specified and directed.

Welding in repairs n. exc 2.5cm in length n exc 6mm thickness of metal to be welded complete all as specified and directed.

Taking down chowkhats or frames of any description n exc 1.5 sqm each (without taking off shutters from the frame) complete all as specified and directed. Note: Including cutting of hole as required at site for taking down and making good of distrubed portion with brick work of CM 1:6 or PCC 1:2:4.

Taking down chowkhats or frames of any description exc 1.5sqm and n exc 4sqm each (without taking off shutters from the frame) complete all as specified and directed. Note: Including cutting of hole as required at site for taking down and making good of distrubed portion with brick work of CM 1:6 or PCC 1:2:4.

Taking down wooden shutters of any description exc 1 Sqm but n. exc 2 sqm each complete all as specified and directed.

Taking down wooden shutters of any description n exc 1 Sqm each complete all as specified and directed.

S&F 125 mm x 60 mm size pressed steel frames for door with one or more rebates including necessary fixing lugs, hinge lock strike plate ect including one shop coat of red oxide primer including cutting holes and making good in PCC 1:2:4type B1 using 20 mm graded stone aggregate complete all as specified and as directed. Note :- 10 mm deformed bar shall be provided in bottom & PCC will be provided in hollow frame in same rate.

S&F 105 mm x 60 mm size pressed steel frames for door with one or more rebates including necessary fixing lugs, hinge lock strike plate ect including one shop coat of red oxide primer including cutting holes and making good in PCC 1:2:4type B1 using 20 mm graded stone aggregate complete all as specified and as directed. Note :- 10 mm deformed bar shall be provided in bottom & PCC will be provided in hollow frame in same rate.

S&F for 30 mm thick locally fabricated flush door shutters solid core construction with block board core and ply wood face panels commercial type on both faces complete all as specified and as directed.

S&F 30mm thick locally fabricated 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) fitted to chowkhats complete all as specified and as directed.

S&F 30mm thick locally made plain framed, panelled Shutters of (two panel), moulded on solind IInd class hard wood rail and styles with lock rail and panel of 12 mm BWP grade BWR Plywood. The size of rail and style as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Make : Rajshri /Black Cobra

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 50 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Make : Rajshri /Black Cobra

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed. Make : Rajshri /Black Cobra

S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed. Make : Rajshri /Black Cobra

S&F size 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid plain glazed and skeleton shutters open rebated and prepared to receive glass gauge etc with cut and mitred beads for securing glass etc size of member of shutter of comprising of virgin PVC polymer of K value 58-60 (suspension Grade) calcium carbonate and natural fibers (wood powder/rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screws with full body threaded star headed SS screws having minimum frame density of 650kg/cum, screw withdrawal strength of 1800 N (face) & 900N (Edge) minimum comprehensive strength of 50N/mmsqr, modules of elasticity 850N/mm sqr and resistance to spread of flame of class A category with property of being terminate/ borer proof, water /moisture proof and fire retardant. Stainless steel but hinges of required size with necessary with full body threaded star headed counter sunk SS Screws complete all as specified and directed. Make : Rajshri /Black Cobra

M&L Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening complete all as specified and directed.

S&F for Factory made solid panel PVC door shutter 30mm thick prelam (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at siteall complete all as specified and directed. Make : Rajshri /Black Cobra

S&F 30mm thick 2nd class hard wood locally fabricated glazed and skelton window or ventilator shutter open rebated and prepared to receive glass, gauge etc divided into square with plain, chamfered or rounded, mitred beads for securing glass/gauge complete all as specified in SSR Part-I para 8.24 (b) complete all as specified and directed.

S&F steel windows z section (locally fabricated) with side hung shutters including box type hinges with steel handle and steel peg stay, glazing bar, 12mm dia MS grill 125mm c/c, dovetailed or welded for both receiving glass & Jali complete all as specified and directed.

S&F framed work such as grills, grating, etc, with ends of bars shouldered and or riveted, or froged in to spikes framed guard bars, barred iron doors, ladders, or similar work confirming to Fe 290 Gde-E-165 complete all as specified and directed.

M&L for 2nd class hard wood for plain, solid, straight chowkats and frames for doors, wondows, ventilators etc. wrough, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints and fixed in position complete all as specified and directed.

S&F 18/19mm thick prelaminated particle board Exterior grade, prelaminated both face with decorative choice laminations one side and other side balancing white, fixed with screws to timber frame work including 2nd class hard wood beading on cutting exposed edges, polishing complete as in palmate boxes and kitchen cabinet and cupboard or in any type complete all as specified and directed.

S&F 18/19mm thick WPC board, prelaminated both face with decorative choice laminations one side and other side balancing white, fixed with screws to timber frame work including beading on cutting /exposed edges, complete as in palmate boxes and kitchen cabinet and cupboard or in any type complete all as specified and directed. Make : Rajshri /Black Cobra

S&F auto closing hinges 35mm of 0 crank (KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete all as specified and directed. Make- KAFF

S&F stainless steel handles 100mm size for kitchen cabinet shutters complete all as specified and directed.

S&F of door seal 20 to 25 mm wide with GI Powder coated flap 0.9 to 1m length fixed to wooden doors shutter with screws, complete all as specified and directed.

M&L for preparation of new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed by the Engr-in-Charge.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

S&F mild steel flat iron of size 25x4 mm as in hold fasts and clamps & similar small articles confirming to Fe-410-W or Fe-290 complete all as specified and as directed by the Engr-in-Charge.

S&F powder coated aluminium frame straight for doors/windows/partitions using aluminium section of minimum size 100mmx44mmx2.00mm thick, 31mmx12mmx3.00mm thick & 49.91x44.45x1.3 mm thick and etc. fixed in position by means of steel screws and patent rawl plugs / bolts / hold fasts of suitable size complete all as specified and directed

S&F powder coated Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin- charge.

S&F 12 mm thick prelaminated particle board exterior grade both side laminated and fixed to aluminium frame complete all as specified and directed.

M&L for powder coated anodised aluminium door shutter fabricated out of aluminium section 1.60mm thick two side openable with top rail and stiles of size 83x44mm, lock and bottom rail of size 100x44mm, (two panels) with and including 12mm thick plain colour PVC sheet (Rajshree make) and 5mm thick ordinary sheet glass duly covered with tinted solar control film, including jointing cleats, glazing clips, rubber packing, aluminium anodised snap beading, screws, anodised aluminium fittings such as hinges (B-21) handles (disc type), tower bolts (200mm long), locking device with duplicate keys complete all as specified and directed.

M&L for powder coated aluminium sliding/openable window shutters (two panel shutter ) fabricated out of section all round having weight not less than 0.42 kg/Rm, top rail, bottom rail, verticle styles and midlle rail of shutter having weight not less then 0.368 kg/Rm, including following hardware:- (a) Powder coated aluminium handle, Joing cleats and glazing clip special and suitable auto lock system, rubber gasket etc. (b) Cost of all fittings & fixture shall deemed to be included in unit rate quoted rate by the tenderer

M&L for powder coated aluminium glazed ventilator fixed/openable type, without sash bars using approved powder coated aluminium sections weighing 0.55 kg/m with provision for fixing of exhaust fan complete all as specified and directed.

S&F for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F for aluminium die cast body door closer hydraulically regulated designation No 3 universal type, suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80 Kg and fixed in repair complete all as specified and directed.

S&F, in repair Mortice lock alumunium body, vertical type of size 100mm of 4 levers etc compete all as specified and as directed

S&F SS curtain rod 25mm dia grade with fancy round knob both ends and brackets complete all as specified and directed

S&F SS 18-20 mm dia grading H-304, with end knob both ends etc for bed room cupbord complete all as specified and directed

S&F in repair 8-10mm thick glass corner shelf with bracket fixed with screws complete all as specified and as directed by Engineer-in-Charge .

S&F in repair glass self (500mmX140mm) with ABS brackets (450X125X6) and fixed to wall with CP brass screws complete all as specified and as directed.

S&F in repair PVC bathroom cabinet with mirror of size 432mm x 311mm complete all as specified and as directed by the Engineer-in-Charge

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L rendering/screeding 15mm thick cment mortar 1:6 on fair faces of brick or concrete surface of wall rendering is to be finished even smooth with out using extra cement complete all as directed by the Engineer - In- Charge.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed by the Engr-in-Charge.

Preparation of old painted wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint complete all as specified and directed.

Preparation of New steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pump, insulation etc,) or insulation boards of any thickness including cover fillets complete all as specified and directed.

S&F Powder coated galvanised MS grid frem work false ceiling of (main T size 32mmx24mmx0.45mm cross tee 24mmx24mmx0.35mm & wall angle size 19mm x 19mm x0.35mm with slot for fixing including suspended with 2mm dia GI wire hangers fixed with steel dash through fasteners from purline of the roof complete all as directed.

S&F 4 mm thick high pressure steam cured (HSPC) preprime non asbestos fiber cement designer board of size 600mm x 600mm /595mm x 595mm decorative finish as in ceiling complete all as specified and directed.

S&F in repairs for GI Frame work comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall ueing nylon sleeves and screws at 450mm centre to centre intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm fixed to wall at approx 900mm centre to centre with gleat and steel expansion fasteners with and including wall section of 0.55mm thickness having kurled web of 50mm and flange of 28mm each complete all as specified and as directed.

S&F in repairs Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed.

M&L for preparation of surfaces and applying two coat of OBD over one coat putty on Gypsum ceiling surface etc. complete all as specified and directed.

Taking down wall panelling and similar work etc and complete all as specified and directed

S&F for Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specifications and drawing all as specified and directed. Make : Rajshri /Black Cobra

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as for Wall Lining complete all as specified and directed.

Dismantling floor hearth wall tiling including cement mortar bedding but not backing removing serviceable meterial to store complete all as specified and directed.

M/L 25mm thk PCC 1:2:4 type B-0 using 12.5 mm graded agg as in flooring finished fair and even without using extra cement complete all as specified and directed.

M&L non skid ceramic coloured tiles 400x400, 7 to 8 mm thick (square or rectangular ) including 15 mm thick screed bed or bedding layer in cement mortar 1:6 in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Vitrified Ceramic tiles 600x600, 8 to 9 mm thick, light coloured as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed layer in CM 1:6 complete all as specified and directed.

M & L for Vitrified Ceramic tiles 600x1200, 10 mm thick (square/ rectangular) polished, in floors etc.including 15mm thick cement mortar screed bed 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Material and labour for colour printed glazed ceramic tiles (300x 450mm / 300x600 6mm thick as in wall,dado/skirtings set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick cement plaster in cement mortar (1:4) complete all as specified and as directed by the Engr-in-Charge.

Demolition of brick work built in cement mortar or cement lime mortar complete all as specified and directed.

Cutting holes in brick walls in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 exc half brick but n exc one brick complete all as specified and directed.

M&L for PCC (1:2:4) Type B1 (using 20mm graded aggregate) in wall, boundary pillars and post or similar work for hold fast in door and windows etc all as directed and specified. .

M & L brick work with fly ash bricks old size straight or curved on plan exc 6.0 M mean radius built in cement mortar 1:6 complete all as specified and as directed. Note : Old clay brick optained from demolition will not be utilised in work.

M&L for Brick work old size with fly ash bricks, straight or curved on plan to any radius radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.

M&L for granite of any type in full length for window sill/platform etc 20 mm thick including rounding of edges machine cut bedded and jointed with grey cement sluury and pointed with white cement with admixture of pigment to match the shade over 20 mm thick screed bed (1:6) including grinding and polishing complete all as directed.

M/S Chadha Brothers (BID ID -3259839)