Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.8 LAccepted-AOC 6 2A CREEK LANE CALC UTTA 14 700014 | KOLKATA | WEST BENGAL | 700014 | ₹1.8 L | L1 | Accepted-AOC L1 |
| 2 | L2₹2.0 L+₹19,800 (10.9%)Rejected-Finance | ₹2.0 L+₹19,800 (10.9%) | L2 | Rejected-Finance L2 |
| 3 | L3₹2.1 L+₹25,470 (14.1%)Rejected-Finance | ₹2.1 L+₹25,470 (14.1%) | L3 | Rejected-Finance L3 |
| Sl No | Description | Qty | Unit | SUPPRIM ELECTRIC L1 | JEET ENGINEERING L2 | PASS TREAT L3 |
|---|---|---|---|---|---|---|
| 1.00 | Complete Dismantling of all the Mechanical Parts of the HT Switchgear after removing to a workable position in side the substation after dismantling of all the components like rollers, main latch, trip latch, guide rollers main drive, shaft, S.S pin, self spring, ratchet assembly etc, has been properly Overhauling by petrol & grease with replacement of old transformer oil with new one of required BDV after overhauling re-fixed as per existing way for interlocking arrangement, bush, spring etc. replace. | 1 | No | 9,300 ₹9,300 Lowest | 13,000 ₹13,000 | 11,500 ₹11,500 |
| 2.00 | Dismantling, Servicing, cleaning, testing, re-fitting and calibration of the Each feeder consist of Relay type- 2nos over current relay and one no earth fault relay (CDG 31 - 1No., VAX 31 - 1No. And VAMP 31 - 1No) For 3.3 /6.6/11/33KV panel | 1 | No | 7,100 ₹7,100 Lowest | 9,500 ₹9,500 | 9,750 ₹9,750 |
| 3.00 | Servicing and overhauling of 400 AMPS/ 500 AMPS/630 AMPS /1250 Amps ,11KV/ 6.6 KV. /3.3kv V.C.B./V.C.U. dismantling the rack from the housing, opening the components, necessary cleaning of the component, carbonised portion, changing of rubber gasket, defective parts, cleaning of all mechanism parts and lubricating the mechanism, opening of C.T. & P.T.S., busbar spout assembly cleaning the same and insulated properly by supply of C.T.C. etc. and refifling all the parts to its original position by making all relevant electrical connection,panel wiring etc. for satisfactory & operation. | 1 | No | 11,900 ₹11,900 Lowest | 15,600 ₹15,600 | 17,500 ₹17,500 |
| 4.00 | Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :3M / Raychem make up to 95sqmm | 1 | No | 13,800 ₹13,800 Lowest | 17,800 ₹17,800 | 21,000 ₹21,000 |
| 5.00 | Supplying of following three core ht power cable with stranded compactcircular aluminium conductor, conductor screen with extruded semi conductingcompound, xlpe insulated, insulation screening with extruded semi conducting compound in combination with copper tape, cores laid up, innersheath of pvc, galvanised steel flat strip armoured, and overall pvc sheathed cable conforming to is 7098 (part-2) 2011 with up to date amendments.(rate in rs. per mtr)
70 Sq mm cable.(11 KV) | 20 | Mtr. | 1,630 ₹32,600 Lowest | 1,800 ₹36,000 | 2,200 ₹44,000 |
| 6.00 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing RCC/HUME/ METAL pipe as required Up to 120 sq. mm | 20 | Mtr. | 85 ₹1,700 | 190 ₹3,800 | 56 ₹1,120 Lowest |
| 7.00 | Necessary checking , Testing & commissioning of Switch Gear along with P.T. circuit including tripping test through all relays, Primary injection through CT & measured secondary current of relays are to be made at site in presence of Electrical Engineer. | 1 | No | 16,500 ₹16,500 Lowest | 16,550 ₹16,550 | 17,600 ₹17,600 |
| 8.00 | High pressure testing including earth measuring. | 1 | No | 18,900 ₹18,900 Lowest | 20,800 ₹20,800 | 19,700 ₹19,700 |
| 9.00 | Supply and fixing of smart bright essential street light (70 Watt) complete with all accessories to be fixed /projected from the wall of the building or on pole incl. making holes/ providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc.Make : Panasonic, 70 watt | 6 | Nos | 9,900 ₹59,400 | 9,225 ₹55,350 | 8,500 ₹51,000 Lowest |
| 10.00 | Supplying of approved make Pedestal fan oscillating type with
base, blades, guard, speed regulator etc. AC 230-250 volts
500mm sweep. | 1 | No | 4,800 ₹4,800 | 5,100 ₹5,100 | 4,700 ₹4,700 Lowest |
Tender Value
Refer Docs
EMD Value
₹4,538
Closing Date
18 Jul 2025, 1:00 pmClosed
Executive Engineer, GAP-I, EM, KMDA
Office of the Executive Engineer, GAP-I, EM, KMDA, 83 1A Vivekananda Road, 3rd floor, Kolkata-700006
Servicing, Overhauling and Commissioning of old existing 11 KV Switch Gear (Bicco make) along with replacement of damaged HT cable at Serampore LS-3 under Serampore Municipality.
2025_KMDA_872251_1
09/EE(E/M)/ GAP-I/ EM/KMDA/T-09(E)/2025-26 Dt. 30.06.2025
Open Tender
Electrical Work/ Equipment
Item Rate
7 days
Serampore Municipality.
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹4,538
Office of the Executive Engineer, GAP-I, EM, KMDA
25 Aug 2026
11 Jul 2025
21 Jul 2025
11 Jul 2025
18 Jul 2025
11 Jul 2025
14 Jul 2025
Amount
Complete Dismantling of all the Mechanical Parts of the HT Switchgear after removing to a workable position in side the substation after dismantling of all the components like rollers, main latch, trip latch, guide rollers main drive, shaft, S.S pin, self spring, ratchet assembly etc, has been properly Overhauling by petrol & grease with replacement of old transformer oil with new one of required BDV after overhauling re-fixed as per existing way for interlocking arrangement, bush, spring etc. replace.
Dismantling, Servicing, cleaning, testing, re-fitting and calibration of the Each feeder consist of Relay type- 2nos over current relay and one no earth fault relay (CDG 31 - 1No., VAX 31 - 1No. And VAMP 31 - 1No) For 3.3 /6.6/11/33KV panel
Servicing and overhauling of 400 AMPS/ 500 AMPS/630 AMPS /1250 Amps ,11KV/ 6.6 KV. /3.3kv V.C.B./V.C.U. dismantling the rack from the housing, opening the components, necessary cleaning of the component, carbonised portion, changing of rubber gasket, defective parts, cleaning of all mechanism parts and lubricating the mechanism, opening of C.T. & P.T.S., busbar spout assembly cleaning the same and insulated properly by supply of C.T.C. etc. and refifling all the parts to its original position by making all relevant electrical connection,panel wiring etc. for satisfactory & operation.
Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :3M / Raychem make up to 95sqmm
Supplying of following three core ht power cable with stranded compactcircular aluminium conductor, conductor screen with extruded semi conductingcompound, xlpe insulated, insulation screening with extruded semi conducting compound in combination with copper tape, cores laid up, innersheath of pvc, galvanised steel flat strip armoured, and overall pvc sheathed cable conforming to is 7098 (part-2) 2011 with up to date amendments.(rate in rs. per mtr) 70 Sq mm cable.(11 KV)
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing RCC/HUME/ METAL pipe as required Up to 120 sq. mm
Necessary checking , Testing & commissioning of Switch Gear along with P.T. circuit including tripping test through all relays, Primary injection through CT & measured secondary current of relays are to be made at site in presence of Electrical Engineer.
High pressure testing including earth measuring.
Supply and fixing of smart bright essential street light (70 Watt) complete with all accessories to be fixed /projected from the wall of the building or on pole incl. making holes/ providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc.Make : Panasonic, 70 watt
Supplying of approved make Pedestal fan oscillating type with base, blades, guard, speed regulator etc. AC 230-250 volts 500mm sweep.
Supply and delivery of 230V,50Hz Heavy duty Metal 12"exhuast fan.
JEET ENGINEERING (BID ID -6714393)
PASS TREAT (BID ID -6732020)
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .