E.I Work

Amount

SUB-HEAD 1 -- DISTRIBUTION WIRING :

Dismantling the existing damaged wiring, small panel, DBs, fans, fittings other electrical accessories and stacking them properly as per direction of EIC.

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 Sq.mm.) single core stranded 'FRLSH' PVC insulated & unsheathed copper wire (Make :- Finolex / Havells / Polycab ) partly in 20 mm size PVC rigid conduit 'FR' (Make :- Precision) [for ceiling portion only] and in 19 mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 Sq.mm.) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Make:- Legrand - Arteor/ L&T- Englaze / Schneider - Unica pure) fixed on Modular GI switch board complete with 2 no. suitable size “Ph & N” copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish. [only PVC Rigid Conduit on ceiling and remaining portion concealed]

Avg. run 8 Mtr.

Avg. run 10 Mtr.

Distribution wiring in 3 X 22/0.3 (1.5 Sq.mm.) single core stranded 'FRLSH' PVC insulated & unsheathed single core stranded copper wire (Make :- Finolex / Havells / Polycab) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point with Modular type plug socket & switch as per GS. (Make:- Legrand - Arteor/ L&T- Englaze / Schneider - Unica pure)

On Board.

Average run 4.5 Mtr

Average run 7.5 Mtr

Cutting channel of 31 mm x 31 mm / 40 mm x 40 mm size on masonry wall incl. S & F heavy gauge polythene pipe(Parrot Gold/Zeolite) dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire fish wire incl. mending good damages to building works.

13 mm dia 3 mm thick.

19 mm dia 3 mm thick.

Supplying and fixing PVC Rigid Conduit HMS 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works

20mm size

25mm size

Supplying and fixing Heavy Duty G.I flexcible Conduit Size on wall, ceiling with saddles and other accessories as required and mending good damages to building works

20mm size

25mm size

Supplying and Drawing 1.1 KV single core stranded 'FRLSH' PVC insulated & unsheathed single core stranded copper wire of the following sizes in the prelaid polythene / PVC rigid Conduit as per GS. (Make :- Finolex / Havells / Polycab )

2 x 22/0.3 (1.5 sqmm) [For AC Control Switch]. [Schedule Item 1(s) / E-9]

2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC [For 20 A Power Plug, Computer Board]

2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC [For SPN DB].

4x56/0.3 (4 sqmm) + 2x36/0.3 (2.5 sqmm) as ECC

4x36/0.3 (2.5 sqmm) + 2x22/0.3 (1.5 sqmm) as ECC

2x84/0.3 (6 sqmm) ( From Panel to VTPN for Earthing)

4x126/0.4 (16 sqmm) + 2x80/0.4 (10 sqmm) as ECC [For 6-way PDB].

Supplying & Fixing sheet metal inspection box (16 SWG) of the following sizes (in mm.) flushed in wall as per GS

Supply & Fixing bakelite / perspex top cover on existing switch board by Brass screws after making housing for switch by cutting bakelite / perspex cover and making necessary connections as required

Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

SUB-HEAD 2 -- BDB, PDB, VTPN ETC. :

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall as per GS.

(2+14) Way. [Make: Legrand/ABB/L&T]

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall as per GS.

6 Way. [Make: Legrand/ABB/L&T]

Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall / flushed in wall as per GS.

12 Way. (Up to 160 A) [Make: Legrand/ABB/L&T]

8 Way (Up to 160 A) [Make: Legrand/ABB/L&T]

Supplying and fixing double door sheet steel (16SWG), powder coated cable end box for TPN DB horizontal / vertical enclosure with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish with nuts bolts etc incl. provision for earthing attachment. [Make: Legrand/ABB/L&T]

6 Way HTPN

8/12 Way VTPN

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection [Make: Legrand/ABB/L&T]

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connectionas per GS [Make: Legrand/ABB/L&T]

Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA/35kA in existing Vertical DBs including necessary connection as per GS.

160 A FP. [Make: Legrand/ABB/L&T]

SUB-HEAD 3-- SUPPLY & LAYING OF CABLES

Supply of 4 Core XLPE Insulated & Sheathed Armoured Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes. [ Make: Havells / Gloster / Polycab]

4 Core 95 Sq.mm.

Laying of cable from 4 core 95 Sq.mm. on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting.

Laying of cable as below, on existing Cable Tray and binding with suitable size GI wire as per GS

4 Core 95 Sq.mm.

Supplying and fixing compression type gland and finishing those for following XLPE / PVC armoured cable 4 Core as per GS.

4 Core 95 Sq.mm.

SUB-HEAD 4-- PLUGS & SOCKETS:

Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works. (Make:- Legrand - Arteor/ L&T- Englaze / Schneider - Unica pure)

2 Row 12 Module

6 Module

Supplying & Fixing GI /PVC Modular Switch Board of the following sizes complete with top cover plate flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works (Make:- Legrand - Arteor/ L&T- Englaze / Schneider - Unica pure)

2 Module (For AC Control Switch)

4 Module

Supply & Fixing 240 V 6 A Modular type switch (Make:- Legrand - Arteor/ L&T- Englaze / Schneider - Unica pure) on existing GI Modular type switch board having top cover plate and making necessary connections as required.

Supply & Fixing 240 V 16 A Modular type switch (Make:- Legrand - Arteor/ L&T- Englaze / Schneider - Unica pure) on GI Modular type switch board having top cover plate and making necessary connections as required

Supply & Fixing 240 V, 6A, 5 pin Modular type plug socket (Make:- Legrand - Arteor/ L&T- Englaze / Schneider - Unica pure), without switch & plug top, on existing GI Modular type switch board with top cover plate and making necy.connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Make:- Legrand - Arteor/ L&T- Englaze / Schneider - Unica pure), without plug top and switch, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

SUB-HEAD 5 - FIXING OF LIGHT FITTINGS:

Fixing only Recessed type 34/36 Watt 2' X 2' LED down light on existing grid type false ceiling incl. necessary connection as required.

Fixing only Recessed type circular (Dia. up to 8") LED down light after cutting the false ceiling incl. necessary connection as required.

Fixing only lamp to batten point

Fixing only single/twin LED light fitting complete with all accessories directly on wall/ceiling/HW round block and suitable size of MS fastener.]

Fixing only single/twin LED light fitting suspended 25 cm bellow the ceiling with 2 Nos. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S & F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5Sq.mm.) flexible copper wire of 1.10 mt. length.

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit as per GS.

SUB-HEAD 6 - SUPPLY OF LIGHT FITTINGS:

Supply of LED full Glow High eficiency light fittings (Make:- Philips, Cat. No. RC380B LED36S-6500 G5 L60W60 PSU OD / G.E Lighting / Crompton having similar specification).

Supply of LED Smart Glow High eficiency light fittings with PIR Control ( Make-Philips, Cat. No.RC383B LED36S-6500 PSU OD WH PIR / G.E Lighting / Crompton having similar specification).

Supply of Single industrial box (thick ness of box should not be less than 22 SWG) type luminaire with CRCA body (Make :- Philips -TMC 502 P 1xT-LED22W P3241/ G.E Lighting / Cropton). incl S&D 1x 18/20 watts 4 ft LED tube lamp (Make:- Philips, Cat. No. - Mas LED tube 1200 mm/2100lm 865/ G.E Lighting / Crompton) having similar specification including aluminium heat sink strip).

Supply of Twin industrial box (thick ness of box should not be less than 22 SWG) type luminaire with CRCA body (Make :- Philips -TMC 502 P 2xT-LED22W P3241 / Wipro having similar specification) incl. S & D 2x 18/20 watts 4 ft LED tube lamp (Make:- Philips, Cat. No. - Mas LED tube 1200 mm 18W865 T8 I / G.E Lighting / Crompton) having similar specification including aluminium heat sink strip). ]

Supply of 240 V, 9 Watt LED (Make:- Philips / Havells/Crompton)

Supply of 1200Lm output recess mounted LED down light ( Make-Philips, DN193B LED12S-6500 PSU WH S2/ / G.E Lighting / Crompton having similar specification )

SUB-HEAD 7 -- FIXING OF FANS:

Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991).

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Make:- Legrand - Arteor/ L&T- Englaze / Schneider - Unica pure) on existing Modular GI switch board as per GS.

Engraving the deptt. number with 10 mm lettering on the body as per GS

Extra for additional one letter incl. hifen, stroke and stop as per GS

Painting upto 10 letters of the engraved number with approved black /red paint as required as per GS.

Extra painting for additional one letter of the engraved number as per GS.

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter:

Supply & Fixing GI sheet (20SWG) metal Cowl with MS flat iron frame & GI wire mesh on wall with necy. bolts & nuts (6 mm dia x 62 mm long)

Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length.

SUB-HEAD 8 -- SUPPLY OF FANS :

Supply of Heavy Duty Exhaust full metal body fans complete with all accessories having the following (Make - EPC / Crompton / Bajaj)

9"(230mm) Speed 1370 RPM.

12"(300mm) Speed 1420 RPM.

Supply of 230V 50Hz , 400 mm sweep heavy duty full metal body wall bracket fan (Cabin fan) complete with all accessories having the following. (Make - EPC / Crompton / Bajaj)

S & D 48″ sweep, 230V 1-Ph. AC ceiling fans incl. all accss. The capacitor of fan must be P-2 type brust proof. (Make - CG HS PLUS / Orient having Similar Specification).

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.. (Make - CG / Orient/Atomberg). [ From CPWD DSR 2018]]

Supply, Installation, Testing and Commissioning of 900 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.. (Make - CG / Orient/Atomberg). [ From CPWD DSR 2018]]

SUB-HEAD 9 -- MISCELENEOUS :

Supplying & Fixing 240 V AC/DC superior type Call Bell (Make: Anchor) on HW board incl. S & F HW board.

Supplying & Fixing of PVC water proof type Loop box (Make-Sintex GSJB2520 /Hensel) of size [250X200X100]mm having hinged PVC top cover & 4 mm thick with rubber gasket lining,railway type mechanical locking arrangement, with DIN rail. on wall as per direction of EIC.

S.I.T.C. of Crono time switch [Make - L&T Cat. No. 67DDT0]

S & F of 3 pole 22 A DIN rail mounted Power contactor with 240V operating coil [ make L&T Model :MNX22 or equivalent model ABB/ Siemens/ Schneider].

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection. [Make: Legrand/ABB/L&T]

Supply and Fixing of PVC terminal block (32A )in C-channel in existing PVC water proof type Loop box (Suitable for 2.5 sqmm & 4 sqmm pvc flexible copper wire)

Connecting the equipments to earth busbar incl. S & Drawing No. 6 SWG G.I. earth wire as to G.S.

S&F Earth bus-bar of Galvanized MS flat 25 mm x 6 mm including nuts, bolts & washers etc. as to GS.

Earthing the installation by (50mm) 2” dia G.I. (TATA-M) pipe as per G.S.

Supply and Fixing of PVC water proof type Loop box (Make-Sintex GSJB10069 /Hensel) of size [1000 x 690 x 300 ]mm having hinged PVC top cover & 4 mm thick with rubber gasket lining,railway type mechanical locking arrangement, on wall as per direction of EIC.

TERMS & CONDITIONS :- The Agency must procure the materials from the Manufacturer / OEM or from their authorised sales channel so that the standard warranty / support of the Manufacturer / OEM becomes applicable to the products to be delivered and installed by them. Documents that authenticates such procurement from the Manufacturer / OEM or from their authorized sales channel and standard warranty / support should be sent from the e-mail of the Manufacturer / OEM / authorized sales channel to the e-mail of Engineer-in-Charge and hard copy of it to be submitted during execution, of work/ submission of bill. If any refurbished material is supplied and installed, penal action will be taken as per existing rules

Defect Liabibility Period 1 (One) year

Make & model of each and every material to be approved by EIC

MAA TARA ENTERPRISE

SUMAN ENTERPRISE