CWE/D-32/2023-24

Amount

Sch 'A' Part-I: (STEEL FURNITURE) (Note : The Steel furniture items catered under this Schedule can be manufactured & supplied by bidder himself or else procured from any of the agencies listed in Appendix 'A' for supply to the department).

Charpoy with Hard Top (Drg No FD/MAP-II/01) :- Overall size shall be 1980mm long, 900mm wide and 440mm high. Two long rails and two short rails shall be 25mm x 65mm x 16 gauge MS rectangular pipe. The legs shall be of size 32mm x 32mmx 32mm x16gauge welded to long and short rails as shown on drg. Two stiffeners of size 25mmx25mmx16gauge shall be provided in equidistant between two opposite long rails. Six number cleat of size 25mmx60mmx6mm shall be welded with frame to support ply. Two stifferners joining legs of size 25mmx25mmx16gauge shall be provided at 150mm from ground level. 12mm thick commercial plywood shall be provided for top as shown on drg with proper nut and bolt shall also be provided at centre of each stifferners for fixing the plywood irrespective of what is shown on drg. PVC hard rubber shoes shall be fixed at bottom of each leg. All steel surfaces shall be painted with synthetic enamel black in color before applying a coat of primer. Rest all as per drg.

Locker Bid side Steel (Drg No FD-257):- All as shown on drawing. Overall size shall be 760mm long , 600 mm wide and 1100mm high. All steel sheet shall be of 1mm thick in front, back, sides, top and bottom Legs shall be u-shape channel 100mm high and 60mm wide ends plugged with 1mm thick mild steel sheet. The legs shall be welded to bottom of almirah. Half of almirah shall have shelves and other half shall have hanging space. A vertical partition shall be provided dividing the width of almirah in to halves. Hanging portion shall have 20mm dia chromium plated steel conduit pipe 1.6mm wall thickness with sockets at 55mmfrom front of shutter of almirah or 80mm top of almirah as directed by Engineer-in-charge. Two shelves, making three equal compartment shall be provided in the other half of almirah. Two black steel studs (one to each front shutter) fixed in side of shutter shall be made to shape with 1mm thick sheet and 80mm wide, heigh being that of shutter shall be provided as directed by Engineer-in-charge. One number, safety type, chromium plated brass hasp and staple of 75mmx40mmx3mm shall be provided to shutter. Chromimum plated handle 100mm long shall be provided to each shutter as shown on drawing. Two 50mm long tower bolts shall be provided to one shutter in the inner side as directed by Engineer-in-charge. Front shutters of almirah shall be side hung with 75mm long butt hinges. All steel surfaces exposed to view when placed in position shall be painted with automotive paint after preparation of surfaces as directed by Engineer-in-charge. Tint of paint shall be as directed by Engineer-in-Charge.

Sub Total

Sch 'A' Part-II: (WOODEN FURNITURE) (Note : The wooden furniture items catered under this Schedule can be manufactured & supplied by bidder himself or else procured from any of the agencies listed in Appendix 'A' for supply to the department).

Book case as per drawing FD-237. All as per drn and specification Timber :- all wood work shall be of first class hard wood (Teak). Back shall be 6mm commercial plywood and top, sides and shuuters, shelves shall be made of 18 mm, thick prelaminated int gde particle board, wooden surface shall be french polishing glossy finish, Base shall be of hard teakwood. Rest all as shown on the drawing & drection of Engr-in-Charge.

Chair Easy (Drg No FD-229):- All as shown on drawing. All wood shall be of seasoned first class hard wood teak (MP). Legs of chair shall be 55 mmx 25mm in section at under side arm rest tapering to the bottom of legs to 25mm x25mm in section . Front legs shall be joined by 50mm x 25mm in section rails provided below seat frame for the support of frame. Rear legs shall be 55mm x 25mm in section below arm rest and 25mmx25mm in section at the bottom legs. Rear legs shall be joined together by rear rails of 50mmx 25mm in section provided at the bottom of seat frame seat frame shall have the rear horizontal out of section 70mmx40mm joining the sides of frame which shall be 70mmx40mm at the back and 25mmx25mm in section near the front rail. The front rail of seat frame shall be out of 55mmx25mm in section teak wood. The seat frame shall be of size 510mm long in front and 480mm long at rear and 575mm deep. The top horizontal rail of back rest shall be out of 55mm x 40mm and shall be 50mmx 20mm. The bottom horizontal frame of back rest shall be out of 70mm x25mm made to shape as shown on drawing. The arm rest out of 65mm x 25mm in section 610mm long shall be provide in shape as shown on drawing. Seat and back shall be woven with plastic cane of 2mm wide 0.4mm thick Shah or Premier brand in Godrej Pattern. Hard rubber rings/PVC toes shall be provided to bottom of legs with screws . All wood surface exposed to view when placed in position shall be French polished with high gloss finish.

Sub Total

M/S ANIL KUMAR