Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹49.1 LAccepted-AOC C O M S MITHUN ENTERPRISES MINNIEBAY JUNCTION PORT BLAIR 744103 | PORT BLAIR | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | L1 | Accepted-AOC Accept | |
| 2 | L2₹52.0 L+₹2.9 L (5.95%)Rejected-Finance | L2 | Rejected-Finance Not being L1 | |
| 3 | L3₹52.8 L+₹3.7 L (7.49%)Rejected-Finance INDUSTRIAL ESTATE DOLLYGUNJ PORT BLAIR 744 103 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | L3 | Rejected-Finance Not being L1 | |
| 4 | L4₹53.0 L+₹3.9 L (7.89%)Rejected-Finance | L4 | Rejected-Finance Not being L1 | |
| 5 | L5₹53.1 L+₹4.0 L (8.13%)Rejected-Finance | L5 | Rejected-Finance Not being L1 |
| Sl No | Description | Qty | Unit | AR CONSTRUCTIONS L5 | S S CONSTRUCTION L8 | M/s J. M. Enterprises L3 | BR ENTERPRISES L4 | AAK ENTERPRISE L6 | M/s Shiva Engineering L1 | ANDAMAN PAINTS PVT LTD L2 | EXCEL ENGINEERING WORKS L7 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for Complete all as specified and directed. | 62.9 | Cum | 950 ₹59,755 | 975 ₹61,327.5 | 990 ₹62,271 | 1,005 ₹63,214.5 | 1,010 ₹63,529 | 900 ₹56,610 Lowest | 985 ₹61,956.5 | 1,015 ₹63,843.5 |
| 2.00 | M&L for laying PCC (1:4:8) type D2 (using 40mm graded aggregate) for sub base and mass concrete in foundation Complete all as specified and directed. | 22 | Cum | 8,000 ₹1,76,000 | 8,100 ₹1,78,200 | 7,850 ₹1,72,700 | 7,900 ₹1,73,800 | 8,600 ₹1,89,200 | 7,800 ₹1,71,600 Lowest | 8,500 ₹1,87,000 | 7,950 ₹1,74,900 |
| 3.00 | M&L for 75mm thick PCC (1:3:6) type C2 using 40mm graded aggregate as in plinth protection including finishing even and smooth with using extra cement, complete all as specified and as directed. | 280 | Sqm | 580 ₹1,62,400 | 602 ₹1,68,560 | 590 ₹1,65,200 | 582 ₹1,62,960 | 597 ₹1,67,160 | 560 ₹1,56,800 Lowest | 575 ₹1,61,000 | 612 ₹1,71,360 |
| 4.00 | M&L for 40 mm thick cement concrete type B1 1:2:4 (20 mm graded stone aggregate) in wearing course/padding concrete complete all as specified and as directed. | 235 | Sqm | 510 ₹1,19,850 | 525 ₹1,23,375 | 525 ₹1,23,375 | 495 ₹1,16,325 | 500 ₹1,17,500 | 480 ₹1,12,800 Lowest | 485 ₹1,13,975 | 540 ₹1,26,900 |
| 5.00 | Material and labour for PCC (1:3:6) type C2 using 40mm graded aggregate as in surface channels and drain, complete all as specified and as directed. | 10.5 | Cum | 9,000 ₹94,500 | 9,215 ₹96,757.5 | 8,900 ₹93,450 | 9,015 ₹94,657.5 | 9,165 ₹96,232.5 | 8,800 ₹92,400 Lowest | 8,950 ₹93,975 | 9,115 ₹95,707.5 |
| 6.00 | Demolition of stone slabs and tiles of any description or thicness in floors laid bedded pointed in any cement mortor in any position not otherwise specifically provided for complete all as specified and as directed. | 250 | Sqm | 105 ₹26,250 | 113 ₹28,250 | 99 ₹24,750 | 103 ₹25,750 | 98 ₹24,500 | 95 ₹23,750 | 90 ₹22,500 Lowest | 107 ₹26,750 |
| 7.00 | M&L 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win?dow-cills, cooking plat?forms and like in cement mortar (1:4) including point?ing in white cement (1:2) us?ing marble dust with admix?ture of pigment to match with shade of granite all as specified and directed. | 10 | Sqm | 6,800 ₹68,000 | 7,000 ₹70,000 | 6,600 ₹66,000 | 6,700 ₹67,000 | 6,800 ₹68,000 | 6,500 ₹65,000 Lowest | 6,600 ₹66,000 | 6,800 ₹68,000 |
| 8.00 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. | 240 | Sqm | 2,200 ₹5,28,000 | 2,300 ₹5,52,000 | 2,200 ₹5,28,000 | 2,100 ₹5,04,000 | 2,150 ₹5,16,000 | 2,000 ₹4,80,000 Lowest | 2,050 ₹4,92,000 | 2,300 ₹5,52,000 |
| 9.00 | M&L for Heavy duty vitrifired coloured tiles 400x400x10 mm thick each of tiles in floor/steps/stairs etc set jointed and pointed in neat cement slurry in floors incl 15mm thick screed in CM 1:4 complete all as specified and directed | 225 | Sqm | 2,100 ₹4,72,500 | 2,150 ₹4,83,750 | 2,100 ₹4,72,500 | 1,950 ₹4,38,750 | 2,030 ₹4,56,750 | 1,900 ₹4,27,500 Lowest | 1,980 ₹4,45,500 | 2,150 ₹4,83,750 |
| 10.00 | Demolition of precast concrete work/ block walling built in cement mortar complete all as directed. | 37 | Cum | 825 ₹30,525 | 855 ₹31,635 | 825 ₹30,525 | 830 ₹30,710 | 870 ₹32,190 | 800 ₹29,600 Lowest | 840 ₹31,080 | 855 ₹31,635 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
27 Jun 2025, 6:00 pmClosed
GE, Minniebay, Sri Vijaya Puram
GE, Minniebay, Junglighat (PO), Sri Vijaya Puram -744103
8504/E8- COMPREHENSIVE REPAIRS TO FOOTPATH, CHAINLINK FENCING, HARD STANDINGS ETC AND CLEANING AND REPAIRS OF SEWAGE LINES, SEPTIK TANKS, SOAKAGE WELL, MANHOLE INCLUDING REPLACEMENT OF SEWAGE LINES AT OFFR MD ACCN AND OTM AREAS ETC UNDER AGE B/R-I OF
2025_MES_711327_1
8604/E8
Open Tender
Civil Works
Item Rate
270 days
GE, Minniebay, Sri Vijaya Puram
Please refer Tender documents.
11 documents required · 11 mandatory
₹500
Yes
GE, Minniebay
₹90,000
Yes
23 Aug 2025
30 May 2025
30 Jun 2025
30 May 2025
27 Jun 2025
13 Jun 2025
Amount
Demolition of cement concrete of any description and in any position not otherwise specifically provided for Complete all as specified and directed.
M&L for laying PCC (1:4:8) type D2 (using 40mm graded aggregate) for sub base and mass concrete in foundation Complete all as specified and directed.
M&L for 75mm thick PCC (1:3:6) type C2 using 40mm graded aggregate as in plinth protection including finishing even and smooth with using extra cement, complete all as specified and as directed.
M&L for 40 mm thick cement concrete type B1 1:2:4 (20 mm graded stone aggregate) in wearing course/padding concrete complete all as specified and as directed.
Material and labour for PCC (1:3:6) type C2 using 40mm graded aggregate as in surface channels and drain, complete all as specified and as directed.
Demolition of stone slabs and tiles of any description or thicness in floors laid bedded pointed in any cement mortor in any position not otherwise specifically provided for complete all as specified and as directed.
M&L 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win?dow-cills, cooking plat?forms and like in cement mortar (1:4) including point?ing in white cement (1:2) us?ing marble dust with admix?ture of pigment to match with shade of granite all as specified and directed.
Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.
M&L for Heavy duty vitrifired coloured tiles 400x400x10 mm thick each of tiles in floor/steps/stairs etc set jointed and pointed in neat cement slurry in floors incl 15mm thick screed in CM 1:4 complete all as specified and directed
Demolition of precast concrete work/ block walling built in cement mortar complete all as directed.
Material and labour for PCC solid block masonry (1:3:6) (using 20mm graded stone aggregate) straight or curved on plan exc 6m mean radius, exc 10cm in width and built in CM (1:6) complete all as specified and as directed
Taking down cement plaster on brick or stone wall and racking out joints hacking for key sucrubing down with water etc. all as directed.
M & L for rendering 10 mm thick in cement mortar 1:4 on concrete or brick masonry surfaces finishing the top surface even and fair without using extra cement complete all as specified and as directed
M & L for preparation of old surfaces and applying one coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal esistance, dirt resistance exterior paint of WHITE COLOUR with silicon additives coat applied @ 1.67 ltr/10 sqm over complete all as specified and as directed by Engineer-in-charge. Make: Asian Paints (Apex Ultima), Berger (Weathercoat Long Life Flexo) Nerolac (Excel Total). Shalimar Paints (Weatherpro+ Super Luxury Emulsion). Note: Rate inclusive of scaffolding at any height.
M & L for preparation of old surfaces and applying one coat of 100% Premium acrylic emulsion paint (company depot tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal esistance, dirt resistance exterior paint with silicon additives coat applied @ 1.67 ltr/10 sqm over complete all as specified and as directed by Engineer-in-charge. Make: Asian Paints (Apex Ultima), Berger (Weathercoat Long Life Flexo) Nerolac (Excel Total). Shalimar Paints (Weatherpro+ Super Luxury Emulsion). Note: Rate inclusive of scaffolding at any height.
M & L for applying Two coats of (white colour)100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. all as directed by the Engineer-in-charge and as per manufacturers instructions Make: Asian Paints (Apex Ultima),Berger (Weather coat long life flexo),Nerolac (Excel total),Shalimar paints (weatherpro+super luxury emulsion) or equivalent as approved by GE. Note: Rate inclusive of scaffolding at any height
M&L Preparing old steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed
M&L for plain cement concrete type B1 (1:2:4) using 20mm graded stone aggregate as in copings cavings, bed plats and embeding swan neck fencing post, etc incl weathering slightly rounded or chamfered angles and throating as directed complete all as specified and directed.
M&L for preparing bituminous surfaces of road and marking 2.5mm thick center lines,stop lines,dashes,arrows etc.and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed by the Engineer-in-Charge.
Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as directed.
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as manufacturers instruction and as directed.
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in ridges, hips, valley gutter, drip, and straight flashing complete all as specified and as directed
S & F Aluminium flat iron work in, wind ties screwed as directed, including all necessary drilling, bolting or riveting etc., and similar work complete all as specified and as directed
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed
Excavating in post holes in hard/dense soil n.exc. 0.5 cum and getting out returning, filling in and ramming in layers n.exc. 25 cm, watering and removing surplus soil to a distance n.exc. 50 mtr and making good the surface complete all as specified and as directed
S&F MS Roof trusses (Framed), trussed, purlins, rafters, crane gantries, rails ,posts and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc.including necessary welding confirming to Fe-410-W(Gde-E250 quality-A) complete all as specified and as directed.
M&L Preparing new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed
Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed.
Dismantiling posts of any description , including taking out embedded portion and making good disturbed ground complete all as specified and as directed.
M&L PVC coated GI chain link fencing 3.5mm dia with 50mm x 50mm mesh including fixing of MS line wire / rod, flat iron & machine made hexagonal or square head bolts to fencing posts including dismantling of chain link fencing complete all as specified.
S&F MS framed work such as fencing post including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed
Supply only mild steel screw bolts n exc 12 mm dia machine made with hexagonal or square head at one end and screwed the other or screwed both ends for fixing of chain link fencing complete all as specified and as directed
Supply only MS Flat iron as in fillets for securing wire mesh including all necessary drilling, bolting or riveting etc and similar work confirming to Fe 410-W(Gde-E-250) quality-A complete all as specified and as directed
Removing & cleaning of blockage WC including WC trap of any description and in any position by removing sand/sludge/silt and other forein material deposited in it (either manually or mechanically) upto first manhole and making the sewage system functional to the entire satisfaction of Engr in Charge complete.
Removing & cleaning of blockage from traps of bath rooms/ kitchen sink/ wash basin/ Urinal point and gully traps of any description and in any position by removing sand/sludge/silt and other forein material deposited in it (either manually or mechanically) upto first manhole and making the seweage system functional to the entire satisfaction of Engr in Charge complete.
Taking out carefully the cover slab of gulley traps of any size and shape, depth and cleaning the block by removing the scum/sludge / any material to a distance exc. 250m and n.exc.500m and cleaning with fresh water placing the cover slab/ Grating in position all as directed by Eng-in-Charge.
Cleaning of sewage lines using passing rubber ball through line to ensure all blockage perfectly clear or split bamboo with a gunny bag piece tied with bamboo with binding wire and inserting the bamboo in sewage lines of dia 100 mm and up to 200 mm through manhole/gully trap clear flow of sewage is observed in sewage pipe complete all as directed by Engr-in-charge.
Cleaning manhole with spades or bucket taking out sludge manhole and disposed off aside by burying the entire sludge under ground in a pit of suitable size by putting earth on it. Again use water with bucket and put into manhole to clear the sludge and ensure the sludge is drain out completely. The depth of manhole exc. 1metre but n.exc 2metre.
Making arrangement of scaffolding in the shafts cutting holes around the bends, tees, junctions any description in the leakage/seepage and making good the cut portion with CM 1:3 or PCC 1:2:4 including finishing the portion with two coats of acrylic emulsion paint complete all as directed.
M & L for clearing vegetation /Shrubs along with all the debris of leaf from Shaft,roof slab/ chujjah ,parapet etc and making surface clean ,making good with CM 1:3 or PCC 1:2:4 (12.5mm graded aggregate) and applying rain coat paint as per the requirement complete all as specified and as directed.
Taking out old unserviceable PVC Pipe of size 75mm & 110mm and 150 mm from trenches and walls with all fitting incl. necessary excavation RFR and removal upto 250 mtrs all as specified and directed.
S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls including necessary clamps as required complete all as specified and as directed...
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation and getting out as in soft/loose soil complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm as in soft/loose soil complete all as specified and as directed.
M&L for lowering,laying,and jointing double wall corrugated pipe of 150mm dia in trenches for non pressure underground drainage and sewarage applications of SN-8 class and joining the same in to the manhole complete as specified by Engr-in-Charge. Make :- Astral,Supreme,SFME or Equivalent as approved by GE
S&F in repair 110mm dia PVC (SWR) bend with or without oval access door of complete all as directed and as directed.
S & F in repair 110 mm dia PVC (SWR) junction single, (Single T) equal or unequal of complete all as directed and as directed.
S&F in repairs PVC flexible waste pipe 32/40 mm mm dia for wash hand basin/kitchen sink complete all as specified and as directed.
S&F in repairs 32mm waste fittings of brass chromium plated and waste coupling of PTMT glazed ware sinks and basins etc, with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed in repairs(Half or full threaded) of complete all as directed and as directed.
S&F in repairs 40 mm waste fittings of brass chromium plated and waste coupling of PTMT glazed ware sinks and basins etc, with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed in repairs(Half or full threaded) of complete all as directed and as directed.
S&F in repairs PVC low level flushing cistern 10 Ltrs capacity with inlet ball valve, float and handles including brackets all as specified and directed by Eng-in-Charge.
S & F in repairs Plastic Water Closet Seat cover, White, Closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.
M&L 75mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement of complete all as directed and as directed.
M&L 110mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement of complete all as directed and as directed.
S&F in repair CP Grating round with hole of 75/100mm size of complete all as directed and as directed.
S&F in repairs PVC flexible connections 15mm dia 600mm long with brass checknuts of complete all as directed and as directed.
ANDAMAN PAINTS PVT LTD (BID ID -3338264)
M/s J. M. Enterprises (BID ID -3337017)
BR ENTERPRISES (BID ID -3337165)
AR CONSTRUCTIONS (BID ID -3336300)
AAK ENTERPRISE (BID ID -3338122)
EXCEL ENGINEERING WORKS (BID ID -3337125)
S S CONSTRUCTION (BID ID -3336991)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .