Maintenance removing damage pole jarjar wire of various 33kv line in ghaziabadd

Supply of following Material Supply of Stay set complete (G.I.Stay rod 20x1800mm, Stay wire 7/8SWG 10Kg, Guy insulator, G.I.Stay clamp, bolt, nut & wasther with concrete grouting) for 33KV line as per specification. As per PVVNL approved vender.

Supply of G.I. Wire 6 SWG. As per PVVNL approved vender.

Supply of G.I. Wire 8 SWG. As per PVVNL approved vender.

Supply of G.I. Wire 16 SWG. As per PVVNL approved vender.

Supply of V-Type Cross Arm 100x50x6 mm G.I channel for 33KV line with G.I.Clamp 75x10mm size. As per PVVNL approved vender.

Supply of G.I.Top Channel 125x65x6mm, 3200 mm long (13.10kg/mt) with G.I. clamp of 75x10mm size, bolts, nuts and washers for 33KV line double pole/ Four Pole. As per PVVNL approved vender.

Supply of G.I. Channel 100x50x6 mm, 2400 mm long (9.56kg/mt) with G.I.Clamp of 65x8mm for dropper channel of 33KV line double pole/four pole. As per PVVNL approved vender.

Supply of G.I Angle Iron 65x65x6mm, (5.80kg/mt) 4300 mm long (02 No.) for bracing set with 4 Nos. G.I. clamps of 65x6mm, bolts, nuts and washers for 33KV line. As per PVVNL approved vender.

Supply of G.I Guarding angle 75x75x6 mm, (6.80kg/mt) x 2200mm long. As per PVVNL approved vender.

Carriage of following material from PVVNL store A.C.S.R. Dog Conductor

Steel Tubler Pole SP-55 11.00Mtr

Steel Tubler Pole SP-72 13.00Mtr

33KV composite Polymeric Pin insulator.

33KV Polymer Disc insulator B&S 70KN

33KV Disc fitting B&S Dog/Racoon 70KN

Erection of Following Material & Miscellaneous Electrical Works. The excavation of foundation pit in mix soil/normal soil/soft soil & hard rock as per site condition and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support. Erection of support structure, complete with providing & fixing of all G.I.Clamps size of 75x10mm, 'F' bracket 75x10mm, G.I.Nut bolt & washer, Stone Pad Al. Binding wire and other accessories as per drawing. The work includes carriage and handling of supports from sectional store to pit site as well as an fabrication work if required. (a) Single Pole (i) 11M Long STP, SP-55 Round Pole

(ii) 13M Long STP, SP-72 Round Pole

The excavation of foundation pit in mix soil/normal soil/soft soil & hard rock as per site condition and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support. Erection of support, complete with providing & fixing of all G.I.Clamps size of 75x10mm, 65x8mm, G.I.Nut bolt & washer, P.G.Clamp, Stone Pad, Al. Binding wire, 'E' bracket 75x10mm, and other accessories as per drawing. The work includes carriage and handling of supports from sectional store to pit site as well as any fabrication work if required & fixing of cross bracing sets 4.3mtr long, from G.I.Angle 65x65x6mm. The work includes cutting holes and providing G.I.Bolt of 16x40mm size, in the middle of the cross bracing with 01No. spring washer of proper size as per drawing/ as per schedule. (a) Double Pole Structures (i) 13M Long STP, SP-72 Round Pole

(b) Tri Pole Structures (i) 13M Long STP, SP-72 Round Pole

(c) Four Pole Structures (i) 13M Long STP, SP-72 Round Pole

The excavation of foundation pit in mix soil/normal soil/soft soil & hard rock as per site condition and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support. Erection of support, complete with providing & fixing of all G.I.Clamps size of 75x10mm, 65x8mm, G.I.Nut bolt & washer, P.G.Clamp, Stone Pad, Al. Binding wire, 'E' bracket 75x10mm, and other accessories as per drawing. The work includes carriage and handling of supports from sectional store to pit site as well as any fabrication work if required & fixing of 01 No. G.I.Top channel 125x65x6mm 3.2Mtr long & 04 Nos. dropper channel 100x50x6mm 2.4Mtr long. The work also includes cutting of channel/angles, making holes on G.I.Channel / G.I. Angle, spring washer of proper size for channel/angle. Contractor also provide G.I.Channel clamps and E- clamps at his own cost as per Respo Norms. (a) End Double Pole Structures (i) 11M Long STP, SP-55 Round Pole

Grouting of supports in CC 1:3:6 (Cement, sand & 20mm stone grift). Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, upto ground level, 300mm plinth above the ground level with C.C. 1:3:6 (Cement, Course sand and Stone grift) with muffing as per drawing. Work includes back filling and proper ramming. (a) Single Pole (i) 11M Long STP, SP-55 Round Pole

(ii) 13M Long STP, SP-72 Round Pole

(b) Double Pole Structures (i) 13M Long STP, SP-72 Round Pole

(c) End Double Pole Structures (i) 11M Long STP, SP-55 Round Pole

(d) Tri Pole Structures (i) 13M Long STP, SP-72 Round Pole

(e) Four Pole Structures (i) 13M Long STP, SP-72 Round Pole

Grouting of stay rods (20x1800)mm including all work of excavation, cement concrete in size (0.60x0.60x0.30)m in ratio 1:3:6 cement, sand, 20mm Stone grift) as per drg. Including back filling of soil and proper ramming etc.

Fixing, tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing, including providing & fixing of Stay Insulators of 33KV and Stay Clamps.

Providing & Earthing of supports with M.S.Earth Rod of (20x2500)mm long including excavation of pit and driving M.S.Rod 3.0M apart from suppor and 0.5M below the ground level and connecting belowl the earth electrodes with the help of G.I.wire No.6SWG, G.I.Nut bolt & washer and earthing lugs.

Making Jumpers on Sectional Pole, by providing & fixing of P.G.Clamps of proper sizes, suitable for Dog Conductor/ 33KV, 3x300Sq.mm XLPE cable. (a) Sectional Double Pole

(b) End Double Pole

(c) Tri Pole Structures

(d) Four Pole Structures

Guarding between two poles like single poles, double poles, four poles, etc. to guard L.T., 11KV Line telephone line and river crossing, road crossing etc. with G.I.wire No.6SWG, G.I.wire No.8SWG and G.I.wire No.16SWG including cutting with fabrication and fixing of G.I.Guarding angle 75x75x6mm with Providing & fixing G.I.clamps size 75x10mm, G.I.Turn buckle, G.I.Eye bolt, G.I.Nut bolts & washer, & bearer wire 04 Nos. etc, as per drawing.

Providing & fixing of SMC Danger board at each location as per specification of the drawing. Size 200mmx250mm & 3mm thickness with G.I.Clamp & nut & bolt for 33KV

Providing & fixing of SMC Number Plate at each location as per specification of the drawing. Size 200mmx250mm & 3mm thickness with G.I.Clamp & nut & bolt.

Providing & Wrapping of barbed wire (2.0Kg per Pole) on 33KV ST Poles SP-55/SP-72 as anti-climbing device for a length of 0.9Mtr. Wire pitch/gap 13mm and fixing upper and lower end keeping lower end at a height of 2.75Mtr. from the ground, complete with providing and fixing of lower end & upper end clamps made of G.I.Flat 40x5mm complete with nuts&bolts.

Supply of Al. Paint & Red oxide Paint as per IS mark & PVVNL specification & Painting of following supports/structures of 33KVLine, with two coats of synthetic enamel aluminium paint after one coat of ready mix primer, including cost of all material, as well as rubbing/cleaning of surface as required for proper completion of work:- (a) 11Mtr SP-55 Poles including all channels/x-arms/clamps etc. (i) Single Supports

(ii) End Pole

(b) 13Mtr SP-72 Poles including all channels/x-arms/clamps etc.: (i) Single Supports

(ii) Double Pole Structure

(iii) Tri Pole

(iv) Four Pole

Removal & Diamantling charges of damaged STP single pole structure.

Removal & Diamantling charges of damaged STP double pole structure.

Removal & Diamantling charges of damaged STP end double pole structure.

Removal & Diamantling charges of damaged STP tri pole structure.

Removal & Diamantling charges of damaged STP four pole structure.

Removal & Diamantling charges of damaged 'V' type x-arm

Removal & Diamantling charges of damaged Pin insulator with Pin

Removal & Diamantling charges of damaged Disc insulator on D/Ckt line.

Removal & Diamantling charges of damaged Disc fitting

Safe carriage of old received back material from site to store including loading & unloading at both end.

Krish Traders