SPECIAL REPAIR TO P-51 AND CERTAIN BR AND EM SANTIONED WORKS AT AFS MADH ISLAND UNDER GE AF THANE

Amount

Removing existing water proofing treatment what so ever exist (except concrete padding), and removing, including chhipping on concrete surface and debris/rubbish materials off the site all as specified.

M&L for roughening surfaces of old concrete floor by picking, sweeping clan and washing down with water to remove dust & brushing neat cement slurry with 3Kgs of cement per sqm etc all as specified & directed

M & L for 15mm thick screed bed or bedding layer in cement mortar 1:4 over RCC slab horizontal or vertical portion for laying water profing treatment all as spd.

Material and labour for Plain Cement concrete (PCC) padding in cement concrete (1:2:4), type BO (using 12.5 mm graded stone aggregate) finished even and smooth without using extra cement all as spd.

M&L for APP modified roof treatment over existing RCC roof with following specification:- (a) Applying bitumen primer @ 0.4 Liters/Sqm with density of 0.87 to 0.89 Kg/liters at 25 degree C on the prepared dry roof surface. (b ) Laying 3 mm thick APP membrane weight not less than 3.50 kg/sqm by torch application with minimum 10 cm side lap and 15 cm end lap. The laying of membrane shall be got done through an authorized applicator of manufacturer of APP membrane. (c) Over the membrane provide a solar reflective bituminous aluminium paint @ 0.1 Kg/Sqm prescribed by manufacturer complete all as specified

Dismantling wrought iron or mild steel work of any description not otherwise provided for, carefuliy without damaging existing structure ,complete all as specified and directed by Engr-in-charge.

Dismentling AC sheets ( corrugated or semi-corrugated) sheets in roofcovering or rain sheds ,complete all as specified and directed by Engr-in-charge.

S &F Rolled section with with Fe-410-W(Gde-E-250) quality-B, as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates ,complete all as specified and directed by Engr-in-charge.

S&F Pre-painted galvalume aluminium zinc cozting GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550Mpa as in roof covering fixed with self tappping screws ,complete all as specified and directed by Engr-in-charge.

M&L for preparation of new surfaces of steel of any description, over 10cm in width or girth,not otherwise described and applying two coats of epoxy paint over a coat of primer ,complete all as specified and directed by Engr-in-charge.

M&L for Preparation of New/Old surface of steel and apply two coat of synthetic enamel paint over a coat of pink primer ,complete all as specified and directed by Engr-in-charge.

M& L for Post construction Anti termite treatment by chemical emulsion (Imidacloprid 30.5 SC) as approved by IS 6313( part 3) : 2013 to Ground floor buildings adhering to following specifications: a) For internal area drill holes of 12-mm dia at 300 mm C/C along the inner junction of wall and floor in the entire premise. Water based chemical emulsion will be injected under pressure into these holes with dosage until refusal or maximum up to 1 Lit per hole. Minimum 400 ml chemical emulsion needs to be fill per hole. b) For external area drill holes of 12-mm dia at 300 mm C/C along the external junction of wall and floor in the entire premise. Water based chemical emulsion will be injected under pressure into these holes with dosage of 2.25 ltrs per rm. c) All drilled holes to be sealed with white cement and matched with surrounding wall finishes. d) Treatment to wooden fixtures: At point of contact of wood work by chemical emulsion ( in oil or kerosene based solution) @0.50 lt/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm center to centre and sealing the same to match existing finish. e) Treatment to termite tubes: Visible shelter mud tubes will be removed and the infested area treated with water based chemical emulsion. All the drilled holes will be sealed and made good using cement. f) Treatment to be done by specialist agency licensed by IPCA and approved by Eng in charge. Specialist agency need to give written warranty for 5 years with yearly inspection and contact details to be displayed on board for attendance of complaint. Note : plinth area of the building will be measured Specialist agency : PCI, Elite corporation, paragon pesticides or IPCA licensed approved by GE

M& L for Post construction Anti termite treatment by chemical emulsion ( chlorpyrifos 20 EC)as approved by IS 6313( part 3) : 2013 to first floor or abve ( if infested with termite) of buildings adhering to following specifications: a) For internal area drill holes of 12-mm dia at 300 cms C/C along the inner junction of wall and floor in the entire premise. Water based chemical emulsion will be injected under pressure into these holes with dosage until refusal or maximum up to 1 Lit per hole. Minimum 400 ml chemical emulsion needs to be fill per hole. b) All drilled holes to be sealed with white cement and matched with surrounding wall finishes. c) Treatment to wooden fixtures: At point of contact of wood work by chemical emulsion ( in oil or kerosene based solution) @0.50 lt/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm center to centre and sealing the same to match existing finish. d) Treatment to termite tubes: Visible shelter mud tubes will be removed and the infested area treated with water based chemical emulsion. All the drilled holes will be sealed and made good using cement. e) Treatment to be done by specialist agency licensed by IPCA and approved by Eng in charge. Specialist agency need to give written warranty for 5 years with yearly inspection and contact details to be displayed on board for attendance of complaint. Note : plinth area of the building will be measured Specialist agency : PCI, Elite corporation, paragon pesticides or IPCA licensed approved by GE

Taking down cement plaster on brick/stone or concrete surface including racking out joints, hacking for key, scrubbing down with water to receive plaster, including removing debris/rubbish materials off the site all as specified.

M&L for erecting at site self supported two tegged B class tubular steel scaffolding to reach any places of work on external façade of building,. Including approaches extention, working platforms, ladders, fitting tackle for men and material etc. complete dismentling and taking away all materials and debris after completion of work etc. complete all as directed.

M&L for Preparation of surface naked brick/ concrete surface of wall by repairing with polymer modified mortar , water proofing coating with two coat of Dr. Fixit Pidicrete URP @1.00 Kg with 1.50 Kg cement complete to the entire satisfaction of GE all as directed by Engineer in Charge.

M&L for cement plaster in CM 1:4, 20mm thick in two coats (15+5) with using integral waterproofing compound finished even & smooth without using extra cement ( Note: Integral liquid water proofing compound to be used in per bag of cement shall be as per manufacturers instructions and paid separately under respective items.).

M&L for rendering 15mm thick in cm 1:6 finished with neeru finish as specified on fair faces of brick work or concrete surfaces. NOTE :- dismentling of electric wiring, casing caping/ holders or any electric item during plastering will re-fix at same place is on contractor own management.

Removing of existing damaged / weakened concrete of ceiling/beam/coloumn carefully by low impact high frequency hammer without damaging existing concrete including cleaning the surfaces by air jet etc complete as directed at site by Engr-in-Charge

M&L for Cleaning the rusted reinforcement and exposed surface by wire brush mechanical device or any other established method and applying rust removing solution as per manufacturer instructions of approved make and quality with cotton waste swap to reinforcement and allowing to dry the same for 24 hours, etc. complete all as directed at site by Engr-in-Charge.

M&L for Applying two coats of anticorrosive epoxy phenolic rebar protective system IPNet RB or equivalent of approved make and quality comprises of resin and hardner mixed in equal proportion by volume with minimum 9-10 hours between the coats, sprinkling dry sand when 2nd coat is tacky so as to provide rough finish and ensuring air curing of minimum 10 hours after the top coat before any subsequent treatment etc. including scaffolding etc. complete.

M&L fo Provide & Apply Bond Coat: M & L for Providing and applying a priming / bonding coat of two component Epoxide Resin confoms to ASTM-C-882-91 of approved make and quality to clean and sound concrete area by brush or any other established method by mixing Base and curing agent in 2:1 proportion by weight for joining old and new concrete as per technical specifications of manufacturer. Work shall be carried out as per the manufacturers specifications & certificate on this account shall be taken from consultant and as approved by Engineer-in-charge etc.complete all as directed at site by Engr-in-Charge .

M&L fo Polymer Mortar: M&L for 20-30 mm thick polymer mortar to load carrying R.C.C. member in two layers in proportion of 1:5:15 by weight of Polymer of approved make and quality, cement and quartz sand with required water cement ratio for desired consistency and applying and finishing by floating, after curing initial setting time applying bonding coat for 2nd coat etc. as per manufactures specification etc. complete (With prior approval by SEMC) all as directed at site by Engr-in-Charge.

M&L for rendering 5mm thick in cm 1:3 on fair faces of concrete as in soffit/ ceilling or slab, chhajjas finished even and smooth without using extra cement.

Supply only liquid water proofing compound ,complete all as specified and directed by Engr-in-charge.

M&L for clean the surface New or Old by wire brushing in order to remove dust, dirt, loose particlesetc. There after wash the surface with clean water and allow to dry. to fill visible cracks/joints with Chemistik Crackseal Caulking Compound (Acrylic Sealant) and allow to dry for 24 hours. There after to apply a coat of primer of Chemistik Primer-N-Seal (Water base primer) and allow to dry for 6 to 8 hours. Finally to provide and apply two coats of Chemistik PDS -50 (WB High Anti Caronation Coating Cum Waterproofing) by brushing at interval of 8 hours between each coat and allow to dry for 72 hours.Complete all as specified and directed by Engineer-in-Charge.

M&L preparing newly plastered surfaces ,and applying 2 coats of Oil Bound Distemper over a coat of alkali resistent primer on walls ,complete all as specified and directed by Engr-in-charge.

M&L for Complete removal of existing treatment on old surface of walls and applying 2 coats of Oil Bound Distemper over a coat of alkali resistent primer ,complete all as specified and directed by Engr-in-charge.

M & L for Preparation of new surfaces of ceiling and applying two coats of Oil bound distemper over a coat of primer ,complete all as specified and directed by Engr-in-charge.

Dismenteling floor ,hearth or wall tilling including cement mortar bedding ( but not backing) all as specified by Engg-in-charge.

M&L for non skid ceramic tiles(Coloured) 7 to 8mm thick (square/rectangular) area of each tile exc 0.11sqm but n.exc 0.16 sqm, in in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including screed bed 15mm thick in CM 1:6 complete all as specified and directed by Engineer-in-Charge. NOTE :- Floor tiles repair with matching tiles in several Patches with proper levelling and fixing with existing tiles.

M&L for Coloured Glazed Ceramic tiles 300 x 450 and 6-7mm thick on vertical surfaces such as skirting, dados and risers to steps etc including 10mm thick backing coat in CM 1:4 ,complete all as specified and directed by Engineer-in-Charge.

Demolition of brickwork or stone boulders masonry built in built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles ,complete all as specified and directed by Engr-in-charge.

M & L for Brickwork with old size brick ,subclass ‘B’ bricks , , straight or curved on plan exc 6m mean radius built in cement mortar 1:6 ,complete all as specified and directed by Engr-in-charge.

M & L for Brickwork with old size brick ,subclass ‘B’ bricks , straight or curved on plan to any radius in half brick thick walls built in CM 1:4 ,complete all as specified and directed by Engr-in-charge.

S & F Stainless steel Peg hook set of Six all as specified and directed by Engr-in-Charge.

S&F brass CP shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union ,complete all as specified and directed by Engr-in-charge.

S & F Soap dosh Stainless Steel of size 160X160X90mm all as specified and directed by Engr-in-Charge.

S & F Cromium Plated Towel Ring of size 150mm internal diameter including Chromium plated brass screws and wooden/ plastic cleats for fix to wall all as specified and directed by Engr-in-Charge.

S&F cast iron floor trap 75mm dia with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) etc ,complete all as specified and directed by Engr-in-charge.

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) ,complete all as specified and directed by Engr-in-charge.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft or loose soil ,complete all as specified and directed by Engr-in-charge.

M&L for 75 mm Hardcore of broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface ,complete all as specified and directed by Engr-in-charge.

M&L for 75 mm thick PCC 1:4:8 type C-2 (using 40mm graded stone aggregate) finishing the concrete surface even and fair all as directed as in sub base etc ,complete all as specified and directed by Engr-in-charge.

M&L for 75 mm thick PCC 1:2:4 type B-2 (using 40mm graded stone aggregate) finishing the concrete surface even and fair all as directed as in sub base etc.,complete all as specified and directed by Engr-in-charge.

S&F in repair GI tubing of 15mm bore, medium grade including all fittings fixed in floor/walls/ceilling ,complete all as specified and directed by Engr-in-charge.

S&F GI repair GI tubing of 20mm bore, medium grade including all fittings fixed in floor/walls/ceilling ,complete all as specified and directed by Engr-in-charge.

S&F Vitreous china wash basin, oval type of size 630mmX450 mm including CI bracket 1 pair CP waste coupling 32mm CP brass pillar cock 15mm bore, PVC connector 450 mm by with CP brass unions suitable for 15 mm bore PVC waste pipe including 32 mm bore of suitable length etc fixed ,complete all as specified and directed by Engr-in-charge.

S&F in Repair vitreous China squatting pan ' orrissa pattern ' size 580 x 440mm white with intergal foot rest etc complete all as specified and directed by Engg-in-Charge.

S&F Stainless steel sinks 1mm thick sheet for kitchen with plugs, washers and waste pipe, cast iron cantiliver brackets and connecting union to pipe overall size 915mmx460mmx with bowl bowl size 410mmx330mmx160mm ,complete all as specified and directed by Engr-in-charge.

S&F PVC flexible waste pipe 32mm dia, 600mm long with connectors for wash hand basin, superior quality ,complete all as specified and directed by Engr-in-charge.

S&F PVC flexible waste pipe 40mm dia, 600mm long with connectors for sink, superior quality ,complete all as specified and directed by Engr-in-charge.

S&F PVC (SWR) gully trap 125/110mm setting and jointing with solvent cement ,complete all as specified and directed by Engr-in-charge.

S&F in repairs gratings circular of 100 mm size of stainless steel (min wt 50 gms) ,complete all as specified and directed by Engr-in-charge.

S&F 15mm bore pillar tap , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe ,complete all as specified and directed by Engr-in-charge.

S&F stop valves for 15 mm bore cast copper alloy, screwed down, high pressure with butterfly handle, screwed both ends for iron pipe or for unions ,complete all as specified and directed by Engr-in-charge.

S&F bib taps for 15 mm bore cast copper alloy with butterfly handle, screwed down, screwed for iron pipe or for brass ferrule ,complete all as specified and directed by Engr-in-charge.

S&F PVC connection with brass socket on both side 60cm for 15mm dia pipe ,complete all as specified and directed by Engr-in-charge.

S&F in repairs.,PVC, low level flushing cistern with complete fitting incl float valve flush pipe bracket for flush etc 10.0 ltrs capacity ,complete all as specified and directed by Engr-in-charge.

S & F in repair PVC SWR pipes for 110 mm bore dia ,single socketed, in any length with rubber ring joints laid in trenches or in floors ,complete all as specified and directed by Engr-in-charge.

S & F in repair PVC SWR bends of 110mm bore ,complete all as specified and directed by Engr-in-charge.

S & F in repair Bottle trap of PTMT having minium water seal of 25mm all as specified and as directed by Engg-in-charge.

S&F in repairs Rotational moulded polyethylene water storage tanks,triple layered (cylindrical verticalwith closed top) of 500 litre capacity hoisted and fixed in position all as specified in SSR Part I ,complete all as specified and directed by Engr-in-charge.

S&F in repairs ball brass valve for 20 mm bore, high pressure, with ploythene float and flynut complete, screwed for iron pipe or brass ferrule ,complete all as specified and directed by Engr-in-charge.

Taking down aluminium sliding windows of any description and any size and replacing the wornout, broken wiremesh, aluminium sections, glass, rubber beading, rollers, locks etc as required and fixing back in to the same opening for easy movement of shutters including necessary fittings and fixtures. NOTE :- Items such as i) Wiremesh, ii) Glass, iii) Rubber beeding, iv) Rollers v) Locks, vi) Aluminium sections etc will be paid seprately under respective items as suppy only .

Supply only ordinary sheet glass 4.8mm thick in square exc 0.5sqm in each panes.

Supply only PVC Star lock for Aluminium windows.

Supply only Nylon / PVC Rollers for Aluminium Windows.

Supply only Rubber beeding suitable for aluminium door/window shutters.

Taking down chowkats or frames exc 1.5 sqm & n exc 4 sqm with shutters without taking off shutters from the frame and removing to store ,complete all as specified and directed by Engr-in-charge.

M&L for 2nd class hardwood (SAL) plain, solid, straight chowkats and frames, wrought frames rebated on the solid, rounded or chamfered put together with glue pinned at joints ,complete all as specified and directed by Engr-in-charge.

S&F 2nd class HW 35mm thick plain framed panelled local made shutter (any panels) with lock rail and panel of 9mm BWR commercial ply or12mm veneered particle board with commercial veneering on both faces. The size of rail & stile as per IS 1003 (part-I) Kiln seasoned & chemically pressure treated ,complete all as specified and directed by Engr-in-charge.

S & F 2nd class hardwood 30 mm Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats ,complete all as specified and directed by Engr-in-charge.

M&L for repairing of PVC wire guage shutter by parting all open loose joints and providing 25X3mm T or L (10 No ) SS socket to connect rails at each joint all as specified and directed by Engr-in-Charge.

Supply & Fix Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as directed by Engr-in-Charge

M&L for Preparation of New surface of Wood and apply two coat of synthetic enamel paint over a coat of pink primer ,complete all as specified and directed by Engr-in-charge.

M&L for Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 , complete all as specified and directed by Engr-in-charge.

M&L for cutting holes in bricks walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar or cement concrete 1:2:4 type B1 as required exc half brick but not exc one brick , complete all as specified and directed by Engr-in-charge.

S&F solid PVC double door frame of size 50mmx95mm made out of 5mm single side prelaminated PVC sheet reinforced with MS tube, supplying & fixing in opening as per specification and drawing , complete all as specified and directed by Engr-in-charge.

S&F factory made solid PVC moulded door shutter (single or double leaf) with particle board/wooden flush door core 28 to 30mm thick (stiles) with 2,4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm prelam PVC sheet on back face, supplying & fixing in frame at site as per specification and drawing , complete all as specified and directed by Engr-in-charge.

S&F 100mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 , complete all as specified and directed by Engr-in-charge.

S&F 150mm long aluminium anodized barrel tower bolts of extruded section , complete all as specified and directed by Engr-in-charge.

S&F 150mm extruded aluminium alloy handles fabricated type anodized , complete all as specified and directed by Engr-in-charge.

S&F aluminium alloy anodized sliding door bolts with hasp,300 mm long & staple (bolt type) and fixing clips of sheet cast or extruded section , complete all as specified and directed by Engr-in-charge.

M&L for powder coated aluminium anodised (minium powder coating 50microns) window/ Openable Ventilators frames and shutters using standard aluminium anodised sections including necessary joining cleats, glazing clips, rubber packing anodised olurninium snap beading, screws, anodised aluminium fitting suitable rubber beading, nylon rollers, Nylon gaskit, concealed star lock, etc complete all as specified etc. complete of standard sections all as specified and directed ( Aluminium section shall be of make Jindal or as per Approval of Engr-in charge) Note :- i) Weight of Aluminium sections for frames, shutters and 'C' or 'F' section for fixing of grill, glass and stainless wire mesh as applicable shall only be considered lex measurment for payment. ii) However cost of other consumable items shall be deemed in be included in the rate quoted. iii) Glass planes, anodized aluminium Grill and STainless steel wire mesh as applicable shall be measured and paid seprately as supplied only,

Supply only powder coated of approved colour aluminium grill of 5mm x 8mm bars size of opening 10 ems size mesh RG 103 ( as per Royal grill)

M&L for special treatment for sunken portion ow WC's bath toilet, kitchen etc executed in following stages:- Stage 1. Proviidng 15mm thick plaster in CM 1:3 mixed with wtaer proofing chemical for Dr.fixt or shlicrete 'R' of STP ltd in the proportion/quantity all as per manufactures' instructuions. Stage2 : Primer-Mix Tarfelt LM of STP letd ( diluted with water in ration 1:1)@ 250 gms/sqm and apply the primer on the plasdtered surfaces. Stage3: Application of 1st coat of tarfeit LM of STP Ltd ( without dilution with water ) !1kg /sqm by brush all as per manufactures instrcutions. Stage 4: Laying fyber galss clodth weight nto less tat 50 grms /Sqm) Over the 1st Coat while the coated surfaces is still sticly. Stage 5 : After 6 to 7 housrs interal, apply second coat i.e final coat of trafet LM os STP Ltd (without Dilution with water) @ 1kg Sqm by brush as per manufactures instruicons . Stage 6 . Providing 10mm thick protective plaster in CM 1:3 Mixed with STP No1 @250 Ml/50kg cement aill as per manufacturers instrcuions Stage 7: Carry out ponding test for 48 hours to ensuser water tightness of repaired sunken proiton. NOTES : (I) Mode of measurement : Actual area treatred ( Floor and adjoingi walls) will be measeured and paid. (ii) The above treament shall be got exectued throught authoriesed applicator of manfacturer and necessary authenticated documents on accound of above shall also be produced by the contractor:-

M&L 150 mm dia SGSW pipes exc, in ordinary soil at avg depth of 1.5 M inclusive of manhole RCC precast manhole cover having 6mm MS plate embedded all round/fibre reinforced cover with angle iron frame pipes laid on moorum bedding , complete all as specified and directed by Engr-in-charge.

M&L for concrete bed of cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) to drain pipes including packing under and hunching against the sides of pipe after they are laid and tested for bore of pipe is 150mm complete all as specified.

Demolition of reinforced cement concrete of any description as in any position & removing Demolition materials , complete all as specified and directed by Engr-in-charge.

M & L Cement concrete M30 (Design Mix) in slab/ lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, including formwork as directed.

M&L for TMT steel bars 6mm dia to 8mm dia & over , cut to length bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips ,quality confirming to TMT bars ,complete all as specified and directed by Engr-in-Charge.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m depth for foundation etc and getting out in hard/dense soil complete all as specified and directed.

M&L for providing PCC 1:4:8 type D2 using (40mm graded stone aggregate) in foundation filling and mass concrete complete all as specified and directed

Material and labour pre cement concrete block masonary with solid blocks of type C1 1:3:6 (20mm graded aggregate) exc 10cm in width and setting in mortar 1:4 including smooth finishing of surfaces use extra cement complete all as specified and directed

Rendering 20 mm thick in cement mortar 1:4 (15 mm thick backing coat and 5mm thick finishing coat) on fair faces of brick work or concrete surfaces including finished even and smooth without using extra cement with using water proofing compound , complete all as specified and directed by Engr-in-charge. (Note: water proofing compound shall be measured and paid seperately).

M&L for 3 coats of White wash to the walls, complete all as specified and directed.

M&L providing precast cement concrete louvers and jallies, 50mm thickType BO 1:2:4 12.5mm graded stone aggregate (measured solid) including all mouldings but excluding frame complete all as specified and directed by Engr - in - Charge.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate, in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, complete all as specified and directed by Engr-in-charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm complete all as specified and directed.

Removing excavated soil to a distance exceeding 500 m but n.exc 1.5 Km and deposited wherever directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.

Excavating in post holes (or similar holes) in hard/dense soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm , watering and removing surplus soil to a distance n.exc 50m and making good surface in hard/dense soil , complete all as specified and as directed.

M&L for Cement concrete in post holes or similar holes using type B2 1:2:4 (40mm graded stone aggregate) ,complete all as specified and as directed.

S&F Rolled mild steel Fe-410- W(Gde- E-250) quality- B in: Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) all as specified and directed by Engr - in - Charge.

S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 ,complete all as specified and as directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and onehexagonal or squarenut, n exc 5cm long ,complete all as specified and as directed.

M&L for Painting to new steel surfaces of any description, n.exc 10cm in width or girth,not otherwise described and applying two coats over a coat of red oxide primer ,complete all as specified and as directed.

Taking down Chowkhats or frames with shutter not exc. 1.5 sq. m each ,complete all as specified and as directed.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded ,complete all as specified and as directed.

S&F Framed work as in doors/window/ ventilator or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed by Engr-in-Charge.

S&F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 ,complete all as specified and as directed.

M&L for Painting two coats over a coat of red oxide primer to new steel surfaces of any description, over 10cm in width or girth,not otherwise described including preperation of new surfaces ,complete all as specified and as directed.

Taking down Shutters exc 1 sq. m and n exc 2 sq. m each all as specified and directed by Engr-in-Charge

S&F Factory Made Solid PVC Moulded Door Shutter, with wood free EPS 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing ,complete all as specified and as directed.

S&F 150mm size Butt hinges, extruded but aluminium alloy anodised and fixed ,complete all as specified and as directed.

S&F aluminium extruded alloy handles fabricated type anodized 100mm long ,complete all as specified and as directed.

Material and labour for energy efficeint wall mounted fan 400mm 1400 RPM working on single phase 250 V AC (Pull cord control for speed & oscillation On-Off) complete with including and fixing arrangement on wall all as specified and directed by Engr-in-Charge.

M & L for point wiring with PVC insulated unsheathed 1100 Volts grade single core multistranded Copper conductor cable 1.5 Sqmm drawn and including PVC conduit and PVC casing caping all accessories, fixed on wall/ ceiling etc with necessary fixing accessories and earth continuity conductor cable of size 1.5 Sqmm green colour Connected to common earth and earth dolly including PVC terminal boxes fixed on wall, suitable for fixing of modular frame, cover for mounting of modular switch and socket for one socket outlet 5 Amps on the independent board complete all as specified and directed by Engr-in-Charge.

S&F of Modular white cover plate with frame 3 Module complete all as specified and directed by Engr-in-Charge.

S&F of Modular Switch 1 way 6A, 1 Module complete all as specified and directed by Engr-in-Charge.

S&F of Modular Sockets 6A - 2/3 pin Combined 2 module complete all as specified and directed by Engr-in-Charge.

M & L for point wiring with PVC insulated unsheathed 1100 Volts grade single core multistranded Copper conductor cable 1.5 Sqmm drawn and including PVC conduit/ PVC casing caping all accessories, fixed on wall/ ceiling etc with necessary fixing accessories and earth continuity conductor cable of size 1.5 Sqmm green colour Connected to common earth and earth dolly including PVC terminal boxes fixed on wall Covered with laminated sheet top cover 3mm thick for mounting switches/ sockets/ fan regulators fixed with cadmium plated machine screws all as specified for the following:-

One socket outlet 5 Amps on the independent board.

One light/Fan point controlled by one switch

Supply and fixing wall mounted fan 400mm sweep 230 volts heavy duty,osilation kit with proper rotation complete with fixing hanger fastners complete all as specified and directed.

Supply and fixing ceiling fan 1200mm sweep 230 volts with electronic type regulator, 5 star rating with hanger fastner for hook type complete all as specified and directed.

S&F Fan regulator electronic step type 240 V complete all as specified and directed.

S&F Switch piano flush type single pole one way 5 Amp complete all as specified and directed

Supply Domestic Pedestal Fan 400 mm sweep movable type , propeller fan available with impeller consisting of 3 blades in pedestal & bracket type RPM 2300 , 400 mm sweep movable type including fixing arrangement with nut ,bolt etc., all as directed and specified.

S&F switch socket combination 2 in 1, 5 pin 5 Amps flush type 230V AC, with base PVC box complete all as specified and directed

M & L for point wiring with PVC insulated unsheathed 1100 Volts grade single core multistranded Copper conductor cable 1.5 Sqmm drawn and including PVC conduit/ PVC casing caping all accessories, fixed on wall/ ceiling etc with necessary fixing accessories and earth continuity conductor cable of size 1.5 Sqmm green colour Connected to common earth and earth dolly including PVC terminal boxes fixed on wall Covered with laminated sheet top cover 3mm thick for mounting switches/ sockets fixed with cadmium plated machine screws suitable for one socket 5 Amps on the independent board all as specified and directed

M & L for point wiring with PVC insulated unsheathed 1100 Volts grade single core multistranded Copper conductor cable 2.5 Sqmm drawn and including PVC conduit/ PVC casing caping all accessories, fixed on wall/ ceiling etc with necessary fixing accessories and earth continuity conductor cable of size 2.5 Sqmm green colour Connected to common earth and earth dolly including PVC terminal boxes fixed on wall Covered with laminated sheet top cover 3mm thick for mounting switches/ sockets fixed with cadmium plated machine screws suitable for one socket 15 Amps on the independent board all as specified and directed.

S&F switch socket combination 2 in 1, 5 pin 6 Amps flush type 230V AC, with base PVC box complete all as specified and directed.

S&F switch socket combination 2 in 1, 3 pin, 6 Amps and 16 Amps flush type 230V AC, with base PVC box complete all as specified and directed.

Supply and fix water cooler electric driven (single phase), having approx storage capacity of 40 litre and nominal cooling capacity of 40 Litres per hour with refrigent R-134 (a) and stainless steel body with single Bip tape 15mm out point complete all as specified and directed.

Supply and fixing Galvanised iron tubing of 20mm dis medium grade with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed.

M&L for Cutting existing steel tubing for 25 to 32mm bore of pipes for addition and a;lteration including screwing existing tubing complete all as specified and directed.

Supply and fixed Gun metal globe of gate valves, with iron wheel head, screwed both ends for iron pipe 20 mm dia complete all as specified and directed.

M&L for fine sand cushioning in trenches 80 mm thick before laying the cable and 150 mm thick after laying the cable ,complete all as specified and directed by Engr in Charge.

Supply and laying unreinforced precast concrete cable cover factory made embossed the mark “LT CABLE” class LV type1 flat size 250x150x40 mm laid in trenches as specified and as directed.

Supply laying, connecting and testing(along with cable test company test certificate) charging of LT UG cable XLPE with aluminium conductor multistranded 1100 volts grade in tranches/wall/floor/ducts/along bridges/roof etc. Including lugs and cable glands of size 3.5 core 25 sqmm all as specified and directed by Engr-in-charge.

Supply and fixing MCCB TPN 100 Amps 415 volts having breking capacity 16KA with suitable enclosure complete all as specified and directed

Supply Only water flow meter of Size 80mm dia

Supply Only water flow meter of Size 40mm dia

M&L for G.I tubing medium grade with all fittings & fixed complete to walls/ Pole /ceilings or laid in floors,complete all as specified and directed by Engr-in-charge. of the folowing dia :-

For 25 mm bore dia

For 40 mm bore dia

For 50 mm bore dia

Jay Jyotirling construction co.

M/S VISHRANTA CONSTRUCTION

R.C. Magla and Co.