REPAIR MAINT TO DRAINAGE COMPOND WALL FENCING HARDSTANDING SHED FOOTPATH PLINTH PROTECTION CULVERT DRAIN COVER AND CERTAIN EM WORKS UNDER GE I GOS

Amount

Demolition of Cement Concrete (unreinforced) of any description & in any position not otherwise specifically provided for, complete all as specified & directed.

M&L for 100 mm thick cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as sub base of floor, complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring average 25 mm thick surface finished even and rough (as in levelling course) to receive the topping layer, complete all as specified and directed.

Excavation in post holes (or similar holes) each not exceeding 0.50 cum, in soft/loose soil, getting out, returning filling in & ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering or removing surplus soil to a distance not exceeding 50 m & making good surface, complete all as specified & directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off premises complete, all as specified and directed

M&L for 10 mm thick heavy duty exterior designer tiles of size 300 mm x 300 mm as in floor set, jointed in neat cement slurry and pointed with grey cement and pigment complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 20 mm thick in CM 1:6 for laying floor finishes complete all as specified and directed.

M&L chequered tile of size 200 x 200 x 18 to 20mm set and jointed in neat cement slury and pointed in grey cement and pigments to match over 20mm thick screed bed in CM 1:6 complete all as specified & directed.

Glazed earthenware tiles 149mmx 149mm (or 152.4mm x 152.4 mm) x 6mm thick, in floors, etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match ® ,complete all as specified and directed.

All as per item no 9 above for work on vertical surfaces such as skirtings, dados and risers to steps etc. ®,complete all as specified and directed.

M&L for Sand filling under floors or in foundations including watering and consolidation,complete all as specified and directed.

S&F machine pressed precast concrete interlocking paver block any shape & size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement & pigment. Complete all as specified & directed.

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 40 mm graded stone aggregate as in surface channels and drains complete all as specified and directed.

M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and directed.

M&L for add or deduct for each 25mm girth or part thereof over or under 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc ,complete all as specified and directed.

M&L for Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth for foundation etc or for shafts, wells cesspits manholes pier holes etc not exceeding 10 Sqm on plan and not exceeding 1.5 m depth in soft /loose soil etc complete all as specified and directed

M&L for Returning, filing in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in any type of soil etc complete all as specified and directed

Removing excavated materials(soil) to distance n.exc 50 m and depositing where directed at a level n.exc 1.5m above the starting point,complete all as specified and directed.

M&L for Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete ) set in cement mortor for 300 mm to 450 mm internal dia of pipe complete all as specified and directed.

S&F reinforced concrete pipes, class NP-2, laid and jointed complete with collars of 300mm dia as in repair complete all as specified and directed.

S&F reinforced concrete pipes, class NP-2, laid and jointed complete with collars of 450mm dia as in repair complete all as specified and directed.

M&L for 50 mm High density polyethelyene pipes (HDPE) of pressure rating 6kgf/sqcm laid in trenches,complete all as specified and directed.

Demolition of cement concrete in ground floors and paving n exc 15 cm thicness (un-reinforced) below or above ground level, complete all as specified and directed.

M&L 75 mm thick cement concrete 1:3:6 type C2 using 40 mm graded stone aggregate as in sub base,floor , plinth protection etc and finishing cement concrete even and smooth without using extra cement as specified and directed by Engr - in - Charge.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in lintels upto 1.5 m clear span, coping, benching, bed block, lintel band, plinth courses etc and similar work including weathering,slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

Demolition of RCC of any description and in any position not other wise specially provided for reinforcement cut as required to facilitate demolition complete all as specified and directed.

M&L for pre cast cement concrete 1:2:4, type B-1, using 20mm graded stone aggregate as in cover slabs (for manholes etc) and similar articles with plain faces, set in CM 1:4 complete all as specified and directed.

Material & labour for Mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking , bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips.complete all as specified & as directed.

Material & labour for Mild steel TMT bars 6mm to 8mm dia and over cut to length, bent to shape required, including cranking , bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified & as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

M&L for Fe 410-W (Gde E-250 quality A) Framed work as in doors or gates of angle or other section with gusset plates,rails,braces etc complete,drilled for fixing of steel sheeting or other covering. Doors,etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening anf fixing complete all as specified and directed

M&L preparation of new or previously untreated steel surfaces of any description n exc 10cm in width or girth and priming with red oxide zinc chrome and applying two coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge

M&L for two coats synthetic enamelled paint to new steel surfaces after preparation over a coat of red oxide primer area over exc 10cm in width or girth etc all as specified and directed by Engr - in - Charge.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L Brick work using fly ash bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster on brick or concrete surface including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on brick or concrete surface, finishing even and smooth without using extra cement complete all as specified and directed.

Material and labour for stone walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6) including brought up to courses complete all as specified and as directed by the Engr-in-Charge.

Material & labour for rendering 15 mm thick in CM (1:4) on other than fair faces of stone masonry, finished even & fair with using extra cement complete all as directed.

M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of cement based paint complete all as specified and directed

Taking down eaves gutters and rain water pipes of any size or pattern including all fittings etc complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed

S&F 110mm bore PVC (SWR) bends any radius complete all as specified and as directed

S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed.

S&F PVC(SWR) bends, any radius of 75 mm bore without access door complete all as specified and directed.

M&L for cutting and removing wild bushes/ vegetation, surface dressing around the septic tank/sock well/ manholes to a distance of 2 mtrs all around and depositing surplus spoil/ rubbish n.exc 50 m complete all as specified and directed.

M&L for cutting and removing wild bushes/ vegetation, etc at bldgs above the 2m height from GL and depositing surplus spoil/ rubbish exc 100M but n.exc 500 M complete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35, complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and as directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS:1161-1998 grade St-240 complete all as specified & directed.

M&L for Fe 410-W (Gde E-250 quality A) Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

Dismantling plain or corrugated sheeting, any gauge, thickness, complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified & directed.

M&L for Cleaning and removing all scale and dirt, etc, from RCC/PVC tanks exc 250 ltr n.exc 500 ltr capacity incl washing of water tank with the use of Tank cleaning motor jet pressure machine and using bleaching powder @ 0.25 Kgs per tank with writing the date of cleaning with any type of paint and from mouths of circulating pipes, including disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.

M&L for Cleaning and removing all scale and dirt, etc, from RCC/PVC tanks exc 500 ltr n.exc 1000 ltr capacity incl washing of water tank with the use of Tank cleaning motor jet pressure machine and using with bleaching powder @ 0.50 Kgs per tank with writing the date of cleaning with any type of paint and from mouths of circulating pipes, including disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.

S&F in repairs ball valves for 20 mm bore dia of pipe high pressure of PTMT with Epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gms) complete all as specified and directed.

S&F in repairs ball valves for 25 mm bore dia of pipe high pressure of PTMT with Epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 455 gms) complete all as specified and directed.

S & F in repair PVC Tank cover for 500 Ltr capacity fixed in position with nuts and bolt complete all as specified and directed.

S & F in repair PVC Tank cover for 1000 Ltr capacity fixed in position with nuts and bolt complete all as specified and directed.

Dismantling fencing wire mesh, any type complete all as specified and directed.

S&F PVC coated chain link of 3.16mm dia mild steel galvanised fencing of mesh size 100 mmx 100 mm as per IS : 2721-2003 weight n exc 4.00 kg per sqm complete all as specified and directed.

S&F Angle iron posts and rails,drilled and struts in fencing including cutting tops to shape as directed, driiling holes, notching for wire, etc, flat iron fillets (for secruing wire mesh etc) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed.

S& F Mild Screw bolts (Machine made) with hexagonal or square head at one ends and to fitted with washers and one hexagonal or square n.exc 15cm long, dia of neck 11 to 15mm complete all as specified and directed.

S&F mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to Fe-410-W (Gde E-250) quality-A or Fe-290 (Gde-E-165) complete all as specified & directed.

Taking down carefully copper/aluminium point wiring (light,fan,bell, socket or power) complete,including fixtures and fittings such as switches, ceiling roses, holders,regulators, sockets, tube light fittings i.e removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made for conditions separately ) and including making good the disturbed surfaces to match with existing surface and colour shade with putty for smooth finishing without andulations complete all as specified and directed. Note:- All old unsv credit materials should be deposited in MES yard day wise after completed of the job, the same material will be issued to contractor through gate pass as schedule of credit against after completion of the work.

Material and labour for cutting chasing,pinning of brick/ stone/concrete wall at any height wall cutting and chases for concealed wiring for 20/25 mm PVC conduit dia pipe,water tubing,etc and making good to facings where required and pointing in cement motor 1:3 to ends or edges of landigs,wall surfaces etc,cutting not exc 10 cm girth and including making good the disturbed surfaces to match with existing surface and colour shade with proper putty for smooth finishing with existing wall complete all as specified and directed.

M&L for one light point controlled by one switch and flame proof and weather proof point wiring using approved colour coding incl providing circuit wiring with 1.5 sqmm PVC insulated, FRHR/FRLS type, ISI marked,conf to IS-694/2010 unsheathed, multistranded, single core, copper cable 1100 volts grade cables drawn through in flame proof and weathere proof ss conduit pipes (stove enamelled steel Conduit) 25 mm dia medium grade(MMS) including providing all steel conduit accessories such as bend, tee,elbow,short pieces etc at any height are surface/consealed in walls / roofs / floors / ceiling as per site requirement etc. flame proof flush mounting modular MS box made out of 1.60mm thick suitable for flame proof switches,sockets,fan regulators, blank plate etc and including 1.5 Sqmm PVC insulated multistranded FRHR type unsheathed(Green colour),single core cable with copper cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade with necessary putty for smooth finishing complete all as specified and directed.

All as per item ser no 68 but for one fan point controlled by one switch and one regulator, complete all as specified and directed.

All as per item ser no 68 but for one exhaust fan point controlled by one switch, complete all as specified and directed.

All as per item ser no 68 but for one 5 pin 6 amps socket point controlled by one 6 amps switch on independent board, complete all as specified and directed.

All as per item ser no 68 but for one 5 pin 6 amps socket point controlled by one 6 amps switch on same board , complete all as specified and directed.

All as per item ser no 71 & 72 but point wiring with 2.5 sqmm and earth conductor of size 1.5 sqmm , for 6 pin 16/6 amps socket outlet point controlled by one 16 amps switch on independent board, complete all as specified and directed. complete all as specified and directed.

All as per item ser no 73 but for 6 pin 16/6 amps socket outlet point controlled by one 16 amps switch on same board, complete all as specified and directed.

All as per item ser no.71 but point wiring with 4.0 sqmm and earth conductor of size 2.5 sqmm complete all as specified and directed.

Supply & fixing flame proof and weather proof switches rotary type with termination box in LM6,16 A, Single pole, 250V,AC, ISI Marked complete all as specified and directed. Make :- Sudhir/CG/Shyaam Switch Gears or equivalent as approved by GE.

Supply & fixing flame proof and weather proof switches rotary type with termination box in LM6,16 A, double pole 16A, 250V,AC, ISI Marked complete all as specified and directed. Make :- Sudhir/CG/Shyaam Switch Gears or equivalent as approved by GE.

Supply & fixing flame proof and weather proof switches rotary type with cable termination box in LM6, double pole 25A, 250V,AC, ISI Marked complete all as specified and directed. Make :- Sudhir/CG/Shyaam Switch Gears or equivalent as approved by GE.

Supply & fixing flame proof and weather proof switch socket & plug combied in LM6,cable termination box in LM6,16A,250v,2P+earth with termination box ISI Marked complete all as specified and directed. Make :- Sudhir/CG/Shyaam Switch Gears or equivalent as approved by GE.

Supply & fixing flame proof and weather proof switch socket & plug combied in LM6,cable termination box in LM6,25A,250v,2P+earth with termination box ISI Marked complete all as specified and directed. Make :- Sudhir/CG/Shyaam Switch Gears or equivalent as approved by GE.

Supply & fixing flame proof and weather proof fan regulator in LM6,cable termination box in LM6,25A,250v,2P+earth with termination box ISI Marked complete all as specified and directed. Make :- Sudhir/CG/Shyaam Switch Gears or equivalent as approved by GE.

Supply and fixing flame proof and weather proof LED batten suitable for single and twin T8 Tube of 16/18/20watt with recommended/suitable for gas/vapor group IIA & IIB and zoe 1&2 of IP65 protective and connecting of electrical connections and testing for its satisfactory performance and incl removing old unserviceable fittings complete all as specified and as directed. Make: - CG cat ref.EXTN2LT8-16-21 or equivalent in Sudhir/Shyaam switchgear as approved by GE.

Supply & fix LED T-8 tubular lamp 20 watt with extruded aluminium/PC body and PC diffuser complete with inbuilt LED driver complete all as specified and directed. Make: Crompton Model No.LTT8-20 or equivalent in Havells/ Philips as approved by GE.

Supply and fixing inrepairs flame proof weather proof LED flood light fittings and fixtures 90 watt rating ,240 volts and including providing necessary fixing arrangements,drivers,nuts,bolts and washers and removing old unserviceable items complete all as specified and directed. Make: - Shyaam switchgear product code SSPL/1251 or equivalent in Sudhir/CG as approved by GE.

Supply and fixing inrepairs flame proof weather proof LED flood light fittings and fixtures 100 watt rating ,240 volts and including providing necessary fixing arrangements,drivers,nuts,bolts and washers and removing old unserviceable items complete all as specified and directed. Make: - Shyaam switchgear product code SSPL/1251 or equivalent in Sudhir/CG as approved by GE.

Supply and fixing inrepairs flame proof weather proof LED flood light fittings and fixtures 120 watt rating ,240 volts and including providing necessary fixing arrangements,drivers,nuts,bolts and washers and removing old unserviceable items complete all as specified and directed. Make: - Shyaam switchgear product code SSPL/1251 or equivalent in Sudhir/CG as approved by GE.

Supply and fixing inrepairs flame proof weather proof LED bulkhead light fittings and fixtures 30 watt rating ,240 volts and including providing necessary fixing arrangements,drivers,nuts,bolts and washers and removing old unserviceable items complete all as specified and directed. Make: - Shyaam switchgear product code SSPL/BH/1843 or equivalent in Sudhir/CG as approved.

Supply and fixing inrepair flame proof and weatherproof plug in switch and socket 16A,3pin,2P+E incl all necessary accessories arrangements,nuts,bolts and washers and removing old unserviceable items complete all as specified and directed. Make: - Shyaam switchgear product code SSPL/2C/1010 or equivalent in Sudhir/CG as approved by GE.

Supply and fixing inrepair flame proof and weatherproof 3 way junction box,100mm dia incl all necessary accessories arrangements,nuts,bolts and washers and removing old unserviceable items complete all as specified and directed. Make: - Shyaam switchgear product code SSPL/JB/105 or equivalent in Sudhir/CG as approved by GE.

Supply and fixing inrepair flame proof and weatherproof 4 way junction box,100mm dia and incl all necessary accessories arrangements,nuts,bolts and washers and removing old unserviceable items complete all as specified and directed. Make: - Shyaam switchgear product code SSPL/JB/105 or equivalent in Sudhir/CG as approved by GE.

Supply and fixing inrepair flame proof and weatherproof SS conduit flexible type pipe 300mm dia and incl all necessary accessories arrangements,nuts,bolts and washers and removing old unserviceable items complete all as specified and directed. Make: - Shyaam switchgear product code SSPL/FH/145 or equivalent in Sudhir/CG as approved by GE.

Supply and fixing inrepair flame proof and weatherproof SS conduit flexible type pipe 500mm dia and incl all necessary accessories arrangements,nuts,bolts and washers and removing old unserviceable items complete all as specified and directed. Make: - Shyaam switchgear product code SSPL/FH/145 or equivalent in Sudhir/CG as approved by GE.

M & L for flame proof and weatherproof sub main wiring with approved colour coding as per IS complete with 2 run of 6 sqmm single core copper conductor cable 1100 volts grade, ISI marked,FRHR/FRLS type,conf to IS-694/1990 as amended, PVC insulated, unsheathed,flexible,multi stranded copper cables drawn through in flame proof and weathere proof ss conduit pipes (stove enamelled steel Conduit) 25 mm dia medium grade(MMS) including providing all steel conduit accessories such as bend, tee,elbow,short pieces,flexible steel pipe etc at any height are surface/consealed in walls / roofs / floors / ceiling as per site requirement etc and including one run of 6 sqmm single core copper cable 1100 volts grade, ISI marked,FRLS type,as earth continuity conductor connected to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed. Note : - Two run of 6 sqmm single core copper conductor cable and one run of 6 sqmm single core copper conductor cable as earth continuity and one run of ss conduit shall be measured as one unit.

M & L for flame proof and weatherproof sub main wiring with approved colour coding as per IS complete with 2 run of 4 sqmm single core copper conductor cable 1100 volts grade, ISI marked,FRHR/FRLS type,conf to IS-694/1990 as amended, PVC insulated, unsheathed,flexible,multi stranded copper cables drawn through in flame proof and weathere proof ss conduit pipes (stove enamelled steel Conduit) 25 mm dia medium grade(MMS) including providing all steel conduit accessories such as bend, tee,elbow,short pieces,flexible steel pipe etc at any height are surface/consealed in walls / roofs / floors / ceiling as per site requirement etc and including one run of 4 sqmm single core copper cable 1100 volts grade, ISI marked,FRLS type,as earth continuity conductor connected to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed. Note : - Two run of 4 sqmm single core copper conductor cable and one run of 4 sqmm single core copper conductor cable as earth continuity and one run of ss conduit shall be measured as one unit.

Supply & fix flame proof and weather proof sheet metal enclosure size 330x350x190mm, flame proof lighting distribution panel incoming :- MCB 2P,32Amps-01 Nos,outgoing :- MCB, SP, 6 Amps-06 Nos double door 240 volts AC,SPN,DB, 8 way, flush mounting with 100amps copper busbar,neutral bar,earth bar and MCB incomer,MCB SPN/DP, and MCB SP as outgoing and incl removing old unserviceable DBs complete all as specified and as directed. Make: - Shyaam switchgear product code SSPL/MCDB/186 or equivalent as approved.

Supply & fix flame proof and weather proof MCB SP 6 to 32 Amps 10 KA,"C" series,AC,240Volts,50Hz , ISI marked complete all as specified and directed.

Supply & fix flame proof and weather proof and MCB SPN 32 Amps 10 KA,"C" series,AC,240Volts,50Hz, ISI marked complete all as specified and directed.

Supply and fixing flame proof and weatherproof exhaust fan with out side louvers 18'',0.25HP,SP 240 Volts of IP65 protective and connecting of electrical connections and testing for its satisfactory and incl removing old unserviceable DBs complete all as specified and as directed. Make: - Shyaam switchgear product code SSPL/MCDB/186 or equivalent as approved by GE.

Supply and fixing flame proof and weatherproof ceiling fan with regulator 48'',SP 240 Volts of IP65 protective and connecting of electrical connections and testing for its satisfactory and incl removing old unserviceable item complete all as specified and as directed. Make: - Shyaam switchgear product code SSPL/MCDB/186 or equivalent as approved by GE.

Supply and fixing flame proof and weatherproof wall fan with out side louvers 18'',0.25HP,SP 240 Volts of IP65 protective and connecting of electrical connections and testing for its satisfactory and incl removing old unserviceable DBs complete all as specified and as directed. Make: - Shyaam switchgear product code SSPL/MT140 or equivalent as approved by GE.

Supply and fixing flame proof and weatherproof pedestal fan with out side louvers 18'',0.25HP,SP 240 Volts of IP65 protective and connecting of electrical connections and testing for its satisfactory and incl removing old unserviceable DBs complete all as specified and as directed. Make: - Shyaam switchgear product code SSPL/MT140 or equivalent as approved by GE.

Takig down old unsv all types of ceiling fans/exhaust fans/wall fans etc of any sweep after disconnecting all necessary electrical connections from ceiling rose to fans and deposited to custodian/MES store yard of AGE E/M Complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, and connected accessories, 230 V, 1200/1400mm sweep,regulator. Min air delivery 225 CFM with service value 6.00 BEE,Star rated with brushless direct current motor and including removing old unsv items complete all as specified and directed.Make:-Crompton Jura Prime or equivalent in Atomberg/Havells/ Orient as approved by GE.

Hanging/fixing only of ceiling fans and connecting up including provision of cable from ceiling rose to fan connector complete all as specified and directed. (Item operated for supply only fans)

Supply and fix new exhaust fan, steel body AC single phase.230Volts of size 300 mm sweep with blades and frame with louvers complete all as specified and directed. Make:-Atomberg/Havells/Crompton or equivalent as approved by GE.

Supply and fix new exhaust fan, steel body AC single phase.230Volts of size 200 /250 mm sweep with blades and frame with louvers complete all as specified and directed. Make:-Atomberg/Havells/Crompton or equivalent as approved by GE.

Supply and fix new exhaust fan, steel body AC single phase.230Volts of size 380 mm sweep with blades and frame with louvers complete all as specified and directed.Make:-Atomberg/Havells/Crompton or equivalent as approved by GE.

Supply and fix new exhaust fan, steel body AC single phase.230Volts of size 450 mm sweep with blades and frame with louvers complete all as specified and directed. Make:-Atomberg/Havells/Crompton or equivalent as approved by GE.

Supply anf fixing new exhaust fan made of sturd engineering plastic PVC type complete with louvers shutters, voltage 230v,50hz,rpm 1200 copper winding of sweep 300 mm complete all as specified and directed. Make:-Atomberg/Havells/Crompton or equivalent as approved by GE.

Supply anf fixing new exhaust fan made of sturd engineering plastic complete with louvers shutters, voltage 230v,50hz,rpm 1200 copper winding of sweep 250 mm complete all as specified and directed. Make:-Atomberg/Havells/Crompton or as approved by GE.

Supply anf fixing new exhaust fan made of sturd engineering plastic complete with louvers shutters, voltage 230v,50hz,rpm 1200 copper winding of sweep 200 mm complete all as specified and directed. Make:-Atomberg/Havells/Crompton or as approved by GE.

Material and labour for PVC insulated,LT armoured electric cable with aluminium standed conductor 1100 volts grade,cross-sectional area 25 sqmm ,2 core laid in trenches/pipes/ducts/wall/boarings with necessary cable lugs and glands,nuts,bolts and washers,saddeling on wall properly etc and testing and including removing old unsv UG cables complete all as specified and directed. Make:- Havells/Finolex/Polycab/Universal or equivalent as approved by GE.

Material and labour for Earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directely in ground vertically ( earth pit not less than 2.25 meters deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron wire 4 mm dia and light grade protection pipe of 15 mm dia from earth electrode up to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate No 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade,GI funnel with wire mesh,including charcoal, salt packed all around the earth electrode plate in layers, PCC earth pit chamber 1:3:6 type C1, of size 45X 45X 45 CM,RCC/(PVC hevy duty cover) cover 1:2:4 type B1 of size 45X45X6 CM, excavation/earth work in any strata and returning filling, removal of surplus soil and testing/test point for required value including removing old item complete all as specified and directed.

Boaring holes horizontally under road without damaging the surface of road (minimum 1.0 Mtr bellow the road surface) with the help of GI tubing of any dia not exc 80mm dia for passing of UG cable all as specified and as directed.

Material and labour for PCC 1:2:4 type B1 using (20 mm graded stone aggregate) for making good cutting portion coping of pole and filling of foundation etc including necessary use and waste of form work complete all as specified and directed.Note:- Top surface of pole coping to making smooth finishing and white washing made by the contractor cost deemed into quoted rete only, complete all as specified and directed.

Supply and filling in and speading unwashed river sand for cushioning and covering the under ground cables in trenches and punning to provide required cover complete all as specified in SSR Part-I and as directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exc 1.5 mtr depth for laying of cables, pipe lines, protection pipes and foundations etc and getting out in soft loose soil complete all as specified and directed.

Returning filling in soil including spreading leveling watering and well rammimg in layer n exc 25 cm complete all as specified and directed

Removing excavated soil not exc 50 mtr ant depositing where directed at a level not exc 1.5 mtr above the starting point all as specified and directed

M & L for brick sub class 'B' 250mm x 115mm x 0.75mm and laid in trenches as in protection of UG cable complete all as specified and directed.

Material & labour for GI pipe 50 mm "light grade" laid in trenches floors/on , pole/road for cable protection with all fittings complete all as specified and directed.Make:- Jindal/Tata/swastik/BST or equivalent as approved by GE.

Material & labour for GI pipe 80 mm "light grade" laid in trenches floors/on , pole/road for cable protection with all fittings complete all as specified and directed.Make:- Jindal/Tata/swastik/BST or equivalent as approved by GE.

Supply and fix copper conductor cable, PVC insulated, sheathed,flexible, multistranded,ISI marked, 1100 volts grade 3 core ;2.5 sqmm and including electric connection through PVC conduit in concealed/casing caping in surface from ceiling fan to ceiling rose and including removing old unserviceable item, complete all as specified and directed. Make:-Havells/Finolex/Polycab or equivalent as approved by GE.

R J ENTERPRISES (BID ID -3093948)

M/s M M Engineering Systems (BID ID -3094821)

M/s Bapujee Builders and Traders (BID ID -3092780)

the bhimani group of companies (BID ID -3094049)

chauhan syndicate (BID ID -3095361)

M/S. KISHAN ENGINEERING (BID ID -3092894)