Construction of 10 Rooms to Govt Higher Primary School at Nandihalli Village of Gangavathi Taluka Under RIDF 28 Trench of The Year 2022-23

Construction of Class Rooms

Earth work excavation for Foundation by mechanical means for all works &

depth upto 3 m, as per drawing and technical specifications, including setting

out, shoring, strutting, barricading, caution li...

Earth work excavation by manual means for drains, canals, waste weir, draft,

approach channels, key trenches, foundation of Buildings & bridges and such

simillar works in all kinds of soils, as per dr...

Providing and laying in position Cement Concrete for levelling course for

all works in foundation. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Super structures of

building , Road works, Water works, Irrigation works & super structure works

of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of

building , Road works, Water works, Irrigation works & super structure works

of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of

building , Road works, Water works, Irrigation works & super structure works

of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of

building , Road works, Water works, Irrigation works & super structure works

of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of

building , Road works, Water works, Irrigation works & super structure works

of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of

building , Road works, Water works, Irrigation works & super structure works

of bridges upto 3.50 m height. The granite/tra...

Centering and Shuttering Charges Footing

Centering and Shuttering Charges Coloumns

Centering and Shuttering Charges Plinth Beams

Centering and Shuttering Charges Beams

Centering and Shuttering Charges Chajja

Centering and Shuttering Charges Slab

Providing Random rubble masonry with hard stone in foundation and

plinth including levelling up with cement concrete 1:6:12 (1 cement : 6

coarse sand : 12 graded stone aggregate 20 mm nominal size) up...

Providing Size Stone masonry with hard stone in foundation & plinth with

Cement mortar 1:6 (1 cement : 6 coarse sand)

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement

including cost of all materials, machinery, labour, cleaning, straightening,

cutting, bending, hooking, laping/welding joints, tyin...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of

foundations and other similar works etc. in layers not exceeding 20cm in depth,

consolidating each deposited layer by r...

Construction of Embankment by excavating the available approved Gravel/

Murrum deposited at a place or borrow pits during or prior excavation with all

lifts and lead, transportation to site, spreading...

Providing Brick work with common burnt clay Non Modular bricks of

class designation 3.5 in superstructure above plinth level in all shapes and

sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) inc...

Providing Half brick masonry with common burnt clay Non Modular bricks

of class designation 3.5 in foundations and plinth in Cement mortar 1:4 (1

cement : 4 coarse sand) including cost of all material...

Providing Mathi/Nandi wood frames of doors, windows, clerestory

windows, ventilators and other frames, wrought, framed or assembled

including making plaster groves (excluding cost of cement concrete a...

Providing and fixing in position collapsible steel shutters with vertical

channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size,

with top and bottom rail of T-iron 40x40x6 mm, with 40 m...

Providing and fixing stainless steel ( Grade 304) railing made of Hollow

tubes, channels, plates etc., including welding, grinding, buffing, polishing

and making curvature (wherever required) and fitt...

Providing and fixing M.S. grills of required pattern in frames of windows

etc. with M.S. flats, square or round bars etc. including priming coat with

approved steel primer all complete. Fixed to openi...

Applying priming coat: With ready mixed red oxide zinc chromate

primer of approved brand and manufacture on steel galvanised iron/

steel works including preparing the surface after thorougly cleaning ...

Painting with synthetic enamel paint of approved brand and

manufacture to give an even shade :Two coats on new work after

thoroughly brooming the surface to remove all dirt, dust, mortar drops

Fixing of door frame in an existing opening including embedding frame in

floor and walls after cutting masonry for holdfasts for embedding holdfast

in cement concrete 1:3:6 of 20mm and down size grani...

Fixing of window frame in an existing opening including embedding frame

in floor and walls after cutting masonry for holdfasts for embedding

holdfast in cement concrete 1:3:6 of 20mm and down size gra...

Providing & fixing factory made PVC Door frame of size 50x47mm with

a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam

sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...

Providing & fixing 30mm thick factory made rigid foam Prelam Panelled

Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and

15x15mm for top & bottom rails, covered with heat moulded Pr...

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3

fine sand) on concrete surface / ceilings including rounding off corners

wherever required smooth rendering, providing and removing s...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement:

4 fine sand) to brick masonry including rounding off corners wherever

required smooth rendering, providing and removing scaffolding, in...

Providing 18 mm cement plaster in two coats under layer 12 mm thick

cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished

with a top layer 6 mm thick cement plaster with cement mor...

Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to

brick/stone masonry including rounding off corners wherever required

smooth rendering, providing and removing scaffolding, includi...

Providing and laying in position Cement Concrete for levelling course for

all works in foundation. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes...

Flooring with 25mm thick polished shahabad slabs using cement mortar

1:6, 25mm thick over existing cement concrete bed or top of roof laid to

line and level and jointed with cement slurry mixed with p...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to

IS : 15622, of approved make, in all colours, shades, e...

Providing skirting, dadooing, rises of steps with white glazed tiles 6mm

thick on 10mm thick cement plaster 1:3 and jointed with white cement

slurry over existing rough plaster surface using glazed ti...

Providing and fixing in position fully panelled Matti/Nandi wood shutters

for doors with , stiles and rails of 30mm. thick with bottom and lock rails

180mm wide top rail and stiles 100mm wide as per d...

Providing and fixing bright finished brass hanging type floor door stopper

with necessary screws, etc. complete

Providing and fixing chromium plated brass handles of 100/125 mm with

necessary screws etc. complete

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic

coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to

required colour or shade, with necessary screws etc...

Providing M.S. Piano hinges ISI marked IS : 3818 finished with nickel plating and fixing with necessary screws etc., complete.Nickel plated mild steel piano hinges 1 mm thick 35 mm wide

Providing and applying white cement based putty of average thickness

1 mm, of approved brand and manufacturer, over the plastered

wall surface to prepare the surface even and smooth complete as per

Distempering with oil bound washable distemper of approved brand

and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...

Finishing walls with Acrylic Smooth exterior paint of required shade :New

work (Two coat applied @ 1.67L/10 m² over and including priming coat of

exterior primer applied @ 2.20 kg/10 m²) with paint ...

Applying priming coat: With ready mixed pink or Grey primer of

approved brand and manufacture on wood work (hard and soft wood)

including preparing the surface after thorougly cleaning oil, grease, di...

Painting wood work with Deluxe Multi Surface Paint of required shade.

Two coat applied @ 0.90L/10 m² over an under coat of primer applied

@0.75 L/10 m² of approved brand and manufacture to give an e...

Providing and laying in position Cement Concrete for all Super structures of

building , Road works, Water works, Irrigation works & super structure works

of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of

building , Road works, Water works, Irrigation works & super structure works

of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of

building , Road works, Water works, Irrigation works & super structure works

of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of

building , Road works, Water works, Irrigation works & super structure works

of bridges upto 3.50 m height. The granite/tra...

Centering and Shuttering Charges Coloumns

Centering and Shuttering Charges Beams

Centering and Shuttering Charges Chajja

Centering and Shuttering Charges Slab

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement

including cost of all materials, machinery, labour, cleaning, straightening,

cutting, bending, hooking, laping/welding joints, tyin...

Providing Brick work with common burnt clay Non Modular bricks of

class designation 3.5 in superstructure above plinth level in all shapes and

sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) inc...

Providing Half brick masonry with common burnt clay Non Modular bricks

of class designation 3.5 in foundations and plinth in Cement mortar 1:4 (1

cement : 4 coarse sand) including cost of all material...

Providing & fixing factory made PVC Door frame of size 50x47mm with

a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam

sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...

Providing & fixing 30mm thick factory made rigid foam Prelam Panelled

Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and

15x15mm for top & bottom rails, covered with heat moulded Pr...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement:

4 fine sand) to brick masonry including rounding off corners wherever

required smooth rendering, providing and removing scaffolding, in...

Providing 18 mm cement plaster in two coats under layer 12 mm thick

cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished

with a top layer 6 mm thick cement plaster with cement mor...

Providing and applying white cement based putty of average thickness

1 mm, of approved brand and manufacturer, over the plastered

wall surface to prepare the surface even and smooth complete as per

Providing Mathi/Nandi wood frames of doors, windows, clerestory

windows, ventilators and other frames, wrought, framed or assembled

including making plaster groves (excluding cost of cement concrete a...

Providing and fixing stainless steel ( Grade 304) railing made of Hollow

tubes, channels, plates etc., including welding, grinding, buffing, polishing

and making curvature (wherever required) and fitt...

Providing and fixing M.S. grills of required pattern in frames of windows

etc. with M.S. flats, square or round bars etc. including priming coat with

approved steel primer all complete. Fixed to openi...

Applying priming coat: With ready mixed red oxide zinc chromate

primer of approved brand and manufacture on steel galvanised iron/

steel works including preparing the surface after thorougly cleaning ...

Painting with synthetic enamel paint of approved brand and

manufacture to give an even shade :Two coats on new work after

thoroughly brooming the surface to remove all dirt, dust, mortar drops

Fixing of door frame in an existing opening including embedding frame in

floor and walls after cutting masonry for holdfasts for embedding holdfast

in cement concrete 1:3:6 of 20mm and down size grani...

Fixing of window frame in an existing opening including embedding frame

in floor and walls after cutting masonry for holdfasts for embedding

holdfast in cement concrete 1:3:6 of 20mm and down size gra...

Providing and fixing in position fully panelled Matti/Nandi wood shutters

for doors with , stiles and rails of 30mm. thick with bottom and lock rails

180mm wide top rail and stiles 100mm wide as per d...

Providing and fixing in position Mathi / Nandi wood fully panelled shutters

for windows with stiles and rails of 25mm. thick, 75mm wide in two

halves with panels of 20mm thick including cost of materi...

Distempering with oil bound washable distemper of approved brand

and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...

Finishing walls with Acrylic Smooth exterior paint of required shade :New

work (Two coat applied @ 1.67L/10 m² over and including priming coat of

exterior primer applied @ 2.20 kg/10 m²) with paint ...

Providing and fixing bright finished brass hanging type floor door stopper

with necessary screws, etc. complete

Providing and fixing chromium plated brass handles of 100/125 mm with

necessary screws etc. complete

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic

coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to

required colour or shade, with necessary screws etc...

Providing M.S. Piano hinges ISI marked IS : 3818 finished with nickel plating and fixing with necessary screws etc., complete Nickel plated mild steel piano hinges 1 mm thick 35 mm wide

Applying priming coat: With ready mixed pink or Grey primer of

approved brand and manufacture on wood work (hard and soft wood)

including preparing the surface after thorougly cleaning oil, grease, di...

Painting wood work with Deluxe Multi Surface Paint of required shade.

Two coat applied @ 0.90L/10 m² over an under coat of primer applied

@0.75 L/10 m² of approved brand and manufacture to give an e...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to

IS : 15622, of approved make, in all colours, shades, e...

Providing skirting, dadooing, rises of steps with white glazed tiles 6mm

thick on 10mm thick cement plaster 1:3 and jointed with white cement

slurry over existing rough plaster surface using glazed ti...

Flooring with 25mm thick polished shahabad slabs using cement mortar

1:6, 25mm thick over existing cement concrete bed or top of roof laid to

line and level and jointed with cement slurry mixed with p...

HEAD ROOM AND PARAPET

Providing and laying in position Cement Concrete for all Super structures of

building , Road works, Water works, Irrigation works & super structure works

of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of

building , Road works, Water works, Irrigation works & super structure works

of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of

building , Road works, Water works, Irrigation works & super structure works

of bridges upto 3.50 m height. The granite/tra...

Centering and Shuttering Charges Coloumns

Centering and Shuttering Charges

Centering and Shuttering Charges Slab

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement

including cost of all materials, machinery, labour, cleaning, straightening,

cutting, bending, hooking, laping/welding joints, tyin...

Providing Brick work with common burnt clay Non Modular bricks of

class designation 3.5 in superstructure above plinth level in all shapes and

sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) inc...

Providing 18 mm cement plaster in two coats under layer 12 mm thick

cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished

with a top layer 6 mm thick cement plaster with cement mor...

Providing Mathi/Nandi wood frames of doors, windows, clerestory

windows, ventilators and other frames, wrought, framed or assembled

including making plaster groves (excluding cost of cement concrete a...

Providing and fixing in position fully panelled Matti/Nandi wood shutters

for doors with , stiles and rails of 30mm. thick with bottom and lock rails

180mm wide top rail and stiles 100mm wide as per d...

Finishing walls with Acrylic Smooth exterior paint of required shade :New

work (Two coat applied @ 1.67L/10 m² over and including priming coat of

exterior primer applied @ 2.20 kg/10 m²) with paint ...

Providing and fixing chromium plated brass handles of 100/125 mm with

necessary screws etc. complete

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic

coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to

required colour or shade, with necessary screws etc...

roviding M.S. Piano hinges ISI marked IS : 3818 finished with nickel plating and fixing with necessary screws etc., complete.Nickel plated mild steel piano hinges 1 mm thick 35 mm wide

Applying priming coat: With ready mixed pink or Grey primer of

approved brand and manufacture on wood work (hard and soft wood)

including preparing the surface after thorougly cleaning oil, grease, di...

Painting wood work with Deluxe Multi Surface Paint of required shade.

Two coat applied @ 0.90L/10 m² over an under coat of primer applied

@0.75 L/10 m² of approved brand and manufacture to give an e...

Distempering with oil bound washable distemper of approved brand

and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...

Electrical Work

Supplying heavy gauge PVC conduit pipe . mm dia.mm thick

confirming to IS 2509 with suitable size bends, metal/PVC Junction

boxes, adhesive paste etc., and running before concreting the slab. The

Supplying heavy gauge PVC Conduit Pipe . dia . mm thick

with suitable size bends, metal junction boxes adhesive paste etc., by

groove cutting in the wall and fixing by bracing U or J hooks and

Supplying and fixing PVC/metal conduit Deep junction box 25 mm deep Junction box

Supplying and flush mounting teak wooden box without front plank,

made of not less than 12 mm thick wood, after due groove cutting,

finishing with necessary cement plastering complete.

Supplying And Fixing Metal Fan Box with Round Hook.

Supplying and wiring adopting loop system in existing PVC

Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) &

1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated

copper wire (confirming to...

Supplying and wiring adopting loop system in existing PVC

Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) &

1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated

copper wire (confirming to...

Supplying and wiring adopting loop system in existing PVC

Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) &

1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated

copper wire (confirming to...

Supplying and drawing Flexible Multicore Cable manufactured with

electrolytic grade flexible copper with low conductor confirming to

IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for

Supplying and drawing Flexible Multicore Cable manufactured with

electrolytic grade flexible copper with low conductor confirming to

IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for

Supplying 6A flush type socket and 6 A flush type SP switch either

surface/flush mounting in existing gang box or in 4mm thick plastic

sheet and fixing over a flush mounted wooden box and wiring using...

Supplying And fixing/replacing of 6/16/32A electrical

accessories on existing switch board.6A Two Way Switch

Supplying and fixing superior quality modular switch mounting

polycarbonate plate with necessary supporting back plate with required

nos. of machine screws, bolts nuts etc., complete on the existing

Supplying and fixing superior quality modular switch mounting

polycarbonate plate with necessary supporting back plate with required

nos. of machine screws, bolts nuts etc., complete on the existing

Supplying 4mm thick plastic sheet with necessary nitches for

fixing switches, regulators etc, and fixing on existing wooden or

metal box using N.F. screws

Supplying capacitor type ceiling fan complete with down rod blades,

shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase

AC supply conforming to ISS-374- 1979 and with double ball be...

Fixing all types and all capacities of fluorescent /false ceiling / spot

light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders

using 23/0.0076" twin twisted PVC insulated wires, r...

Fixing a ceiling /wall mounting fan of all capacities and all types,

with necessary clamps and 'S' hook made out of 15mm dia MS rod,

with 5 A. ceiling rose of approved quality with necessary length of...

Supplying & fixing miniature circuit breakers on existing MCB

distribution boards using necessary fixing materials and 'C' Type

curve, indicator ON/OFF, energy cross-3 with Short circuit breaking

Providing and fixing rectangular high density polyethylene water storage

loft tank with cover, conforming to ISI : 12701, colour of opaque white or

as approved by Engineer-in-charge. The rate includes...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, including fixing the pipe wi...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, including fixing the pipe wi...

Providing and fixing brass bib cock of approved quality 20 mm nominal bore

Providing and fixing water closet squatting pan (Indian type W.C. pan )

with 100 mm sand cast Iron P or S trap, 10 litre low level white

P.V.C. flushing cistern, including flush pipe, with manually co...

Providing and fixing white vitreous china flat back or wall corner type

lipped front urinal basin of 430x260x350 mm and 340x410x265 mm

sizes respectively with automatic flushing cistern with standard ...

Providing and fixing white vitreous china flat back half stall urinal

of size 580x380x350 mm with white PVC automatic flushing cistern,

with fittings, standard size C.P. brass flush pipe, spreaders wi...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar

taps, 32 mm C.P. brass waste of standard pattern, including painting of

fittings and brackets, cutting and making good the w...