SPECIAL REPAIRS TO BUILDING NO P-54 (SPORTS COMPLEX) AT INS AGRANI COIMBATORE

Amount

Dismantling Asbestos cement (corrugated, semi - corrugated, etc. ) sheets in roof coverings complete all as specified and directed.

M&L for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling Brick tiles or terracing tiles, single layer of roofs and removing debris outside MD land complete all as specified and directed.

M&L for cleaning the roof surface thoroughly with wire brush and remove deleterious materials and screed bed in cement mortar 1:3 ,10 mm thick (min) with and including WPC and providing water proofing treatment to roof slab using 4 mm thick APP modified water proofing membrane weighing not less than 4.00 Kg/Sqm reinforced with one woven polyester mat weighing not less 160g/Sqm having softening point not less than 140 degree centigrade longitudinal tensile strength not less than 650 N/5 cm, tearing strength of 180 N (Min),a static puncher resistance of 180,torch application including minimum 10 cm side over lap & 15 cm end overlap all as specified in clause 11.40.3.3 of SSR Part I and Particular specification. Note:- Please refer particular specification for detailed description of work..

M&L 300 x 300 x 20 mm thick Hydraulically pressed burnt clay tiles set over 20 mm thick cement mortar screed (1:4), set, jointed and pointed in cement mortar (1:3) mixed with 5% crude oil by weight of cement over APP membrane complete all as specified and directed.

Disconnecting existing PVC water tanks of capacity exc 250 ltrs but nexc 500 ltrs, setting aside (or lowering If required) for repairs, cleaning etc and hoisting if required reconnecting and re-fixing In position complete. (clearing, repairing, etc if required shall be measured separately ).

Taking down chowkats or frames (wooden / steel/ PVC) of area exc 1.5 sqm but n exc 4 Sqm without taking off shutters from the frame complete all as specified and directed.

M&L for IInd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, including tarring with a coat of tar and sanding the back or surfaces contacted with concrete or mortar complete all as specified and directed.

S & F 2nd class hard wood framed, panelled factory made shutter 40 mm thick (any mo. of panels) with lock rail and panel of 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated all as specified and as directed.

S&F 125mm size, mild steel cold rolled butt hinges complete all as specified and directed.

M&L for 150mm size aluminium handle (ISI Marked) cast type anodized, fixed complete all as specified and directed.

M&L for 300mm size aluminium tower bolt (ISI Marked) anodized, fixed complete all as specified and directed.

S&F 300mm long Aluminium alloy, anodised, sliding door bolt (ISI Marked) with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified.

M&L screed bed or bedding layer of mortar 15 mm thick in CM 1:4 for laying floor finishes etc complete all as specified and directed.

M&L for light shade vitrified tiles 10mm thick square, area of each tile n.exc. 0.36 Sqm in floors etc set and joint in neat cement slurry and pointed in white cement or coloured cement to match the shade laid over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

S&F Non-skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for rendering 10 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces complete all as specified and as directed.

M&L for Glazed ceramic tiles in vertical surface 300x200x 7/8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L Preparation of new wooden surface of any description over 10cm in girth or width and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Demolition of 100mm PVC drain pipes and taking out of wall and accessories complete

S&F PVC (SWR) pipes 110 mm dia single socketed in any length , with rubber rings fixed to wall all as specified and directed .

Demolition of reinforced cement concrete as in roofs, floors (other than ground floors), beams, landing, chajjas and similar suspended work.

M&L for reinforced cement concrete type B1, 1:2:4 (nominal mix) in beams. Cantilevered, bressumers and beams complete all as specified and directed

M&L for Formwork to challah hoods, chajjas, weather shades, corbels, water troughs and similar items including edges, Rough finished surface of concrete flat complete all as specified and directed.

M&L for TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

Demolition of cement concrete (un-reinforced) of any description in ground floors and pavings nexc 15cm thick (below or above ground level).

M&L For 75mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement.

Hacking out old broken glass panes (any thickness, size, quality or description from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads.

S&F sheet glass ordinary quality, plain 3.00mm thick glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified and directed.

Taking down cement or cement lime plaster from brick or PCC block walls etc. including raking out joints, hacking for keys, scrubbing down with water etc. complete all as specified and directed.

M&L for rendering 10 mm thick in CM 1:6 on fair faces of brickwork or concrete surfaces finished even smooth without using extra cement complete all as specified and as directed.

M&L for preparation of newly plastered surface of wall and applying two coats of distemper oil emulsion (Asian paint Royale or equivalent of other make given in list of make) over a coat of alkali resistant primer all as specified and as directed.

M&L Cement plaster in two coats 8mm thick in CM 1:4 mixed with approved WPC over 12mm thick in CM (1:6) base coat on external surfaces finished even smooth without using extra cement complete all as specified and as directed. Note:-WPC will be measured and paid separately. Dosage of WPC shall be as per manufacturer's instruction.

Supply only Integral waterproofing compound (ISI marked)

M&L for preparation of newly plastered surface of wall and applying two coats of cement based paint over a coat of alkali resistant primer all as specified and as directed.

M&L Preparation of old treated surfaces of ceiling and applying one coat of white wash complete all as specified and directed.

M&L Preparation of old treated surfaces of wall and applying one coat of distemper oil emulsion complete all as specified and directed.

M&L Preparation of old treated surfaces of wall and applying one coat of cement based paint complete all as specified and directed.

M&L Preparation of old painted surfaces of wall of any description over 10cm girth or width and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L Preparation of old treated surfaces of wall and applying one coat of white wash complete all as specified and directed.

M&L for Cleaning and preparing old polished Surfaces of any description, width or girth and applying one coat of Bees-Wax Polishing complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails

M&L for 2nd class hardwood Boarding 25 mm thick in floors and skirting planed one side & edges tongued and grooved or rebated, complete all as specified and directed.

M&L for Preparing new wooden surfaces of any description, width or girth and applying one coat of Bees-Wax Polishing complete all as specified and directed.

M&L Preparation of old painted steel surface of any description over 10cm in girth or width and applying one coat of synthetic enamel paint complete all as specified and directed.

S&F in repairs Vitreous china wash basin white ( flat back or angle back type ) of size 580x450 including brackets , including cutting for pinning in ends of brackets or erecting stand and waste pipe fixed (Includes fixing only of tap & waste coupling) and provn of pillar taps fancy type15mm cast copper alloy with capstan heads , Chromium plated screwed down high pressure with or without lettered "Hot " or "cold" with long screwed shanks and fly nuts , screwed for iron pipes complete all as specified and directed.

S&F Towel rail 600mm long 'D' type of brass chromium plated 20mm dia with and including chromium plated brass screws complete all as specified and directed .

S&F in repairs vitreous China wash down water closet pan (pedestal pattern), coloured with and including plastic water closet seat, black, closed pattern with flat bottom, cover and mild steel chromium plated or aluminised hinging device, fixing bolts, PVC valve less, syphonic action type, flushing cistern 10 ltrs capacity, low level, white, with inlet, ball valve, float & handle incl brackets complete all as specified and directed.

S&F in repairs CP brass bib tap fancy type with crutch or butterfly handle , screwed down , screwed both ends for iron pipe or for brass ferrule 15 mm bore complete all as specified and directed .

S&F in repairs 15mm dia CP cast copper alloy stop valve / angle valve fancy type screwed down, with crutch or butterfly handle , screwed down , screwed both ends for iron pipe or for unions .

S&F PVC connection 15 mm size with PTMT nuts of length 450 mm long complete all as specified and directed .

S&F in repairs brass chromium plated hand shower (health faucet) with 1.5Mtr long flexible tube and wall hook complete all as specified and directed .

S&F in repairs PTMT urinal spreader of any colour suitable for 15 mm bore (minimum weight 60gm) including CP pipe complete all as specified and as directed.

S&F in repairs vitreous china urinals white full stall type including all fittings complete all as specified and as directed.

S&F in repairs PTMT push cock (minimum weight 15-50 gm) screwed down, screwed for iron pipe of brass ferrule and fixed 15 mm bore complete all as specified and as directed.

S & F in repairs Soap dish vitreous china coloured appx size 160 x 160 x 90mm recessed type fixed to plugs with CP brass screws complete all as specified and directed .

M&L for Waste coupling 40mm dia of PTMT (half or full threaded) (Minimum weight 32mm- 45gms/40mm-60 gms) complete all as specified and directed .

M&L for 15 mm dia UPVC pipe of pressure rate 10kgf/cm2 suitable for water supply including taking down existing steel pipes and accessories complete all as specified and directed.

M&L for 20 mm dia UPVC pipe of pressure rate 10kgf/cm2 suitable for water supply including taking down existing steel pipes and accessories complete all as specified and directed.

Taking down exhaust fan, disconnecting ceiling cable and depositing exhaust fan to MES store yard all as specified and as directed.

S&F Wind driven turbine ventilator of throat diameter 600mm, blades made of aluminium 0.71mm thick and 8011 alloy all aluminium construction complete all as specified and directed. Make: WINDY24PLUS of make SVS Green or Equivalent model of manufacturers as approved by AGE(I) .

GMS Builders

SENTOOR BUILDERSS

K C ASSOCIATES

CAK Enterprises

p.chinnasamy

G Perumal and co