SPECIAL REPAIRS TO GC MESS AND ROOF OF BLDG No.E-47 UNDER GE MCEME, SECUNDERABAD

Amount

Dismantling of asbestos cement (corrugated, semi corrugated etc.) sheets, plain or corrugated steel sheetingof any gauge, thicknessor similar roof coverings etc completed all as specified.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mPa as in roof covering/cladding to wall, fixed with self tapping screws completed all as specified.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour for ridge/valley gutter tensile strength of 550 mPa as in roof covering/ cladding to wall, fixed with self tapping screws as specified etc completed all as specified.

Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5 sqm but n. exc 4 sqm each.

Taking down chowkats or frames with shutters (without taking off shutter from the frames) n. exc. 1.5 sqm each.

S&F factory made 100% teerite & borer proof, moisture proof, fire retardant, eco-friendly product made from 100% virgin PVC resin solid wood plastic composite (WPC) door frames of cross section 90x45 mm made from wood plastic composite (single extruded process) material having minimum density of 780 kg/cum, single rebate 30x10 mm to receive shutter of 28-30 mm thickness.

S&F of 28-30 mm thick factory made rigid WPC plain/pre laminated door shutter made with 100% solid PVC flush door shutter made from co-extruded three layer PVC foam sheet (single extruded) with density not less than 600 kg/cum, outer layer min. 1 mm thick shall be of rigid PVC with density not less than 1400 kg/cum.

S&F butt hinges, 100mm length, B-21 type extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, complete all as specified and directed.

S&F 150mm size handle extruded aluminium alloy anodised, fabricated type, complete all as specified and as directed.

S&F 150mm long aluminium, anodised barrel tower bolt of extruded section, complete all as specified and as directed.

S&F 3 mm thick figured glass ordinary quality and glazing with oil putty /wooden beads in square n.exc. 0.50 sqm each pane on new or old windows including hacking out old complete all as specified and directed.

S&F 3 mm thick figured glass ordinary quality and glazing with oil putty /wooden beads in square exc. 0.50 sqm each pane on new or old windows including hacking out old complete all as specified and directed.

S&F 4.8mm thick float glass ordinary quality and glazing with wooden beads or oil putty in square exc. 0.50 sqm in each pane complete.

S&F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties complete all as specified and directed.

M&L for 2nd class hard wood plain framed factory made panel shutter 35mm thick (two or three panels) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces, the size of rail & style as per IS: 1003 (Part-I) kiln seasoned and chemically pressure treated.

M&L for preparation of new wooden surfaces of any description, over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

M&L for preparation of old wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new steel surfaces of any description, not otherwise described over 10 cm in width or girth and applying 2 coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

S&F brass butt hinges medium weight cold rolled of size 100 mm complete all as directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level), complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in Cement Mortar or cement lime mortar including all quoins, arches, pillars etc excluding ashlar facings, dressed stone work and precast concrete articles complete all as directed.

M&L for brickwork with fly ash bricks in CM 1:6 straight or curved on plan exc 6 m mean radius all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate in plinth protection, finished even and smooth with out using extra cement.

M&L for 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) in sub bases, floors and pavings etc.,

Dismantling cast iron work of any description, etc complete all as specified and directed.

Dismantling of mild steel work of any description not otherwise specifically provided for complete all as specified and as directed.

S&F rolled MS structural sections of angles, channels etc confirming to Fe 410 W (grade E 250) quality "B" as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and rurming rails and guides sliding doors, fixed with angle cleats or other connecting plates complete all as specified and as directed.

S&F for Steel work in trusses (hallow sections viz square, rectangular and tubular) including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS: 1161-1979 grade St.-240, etc complete all as specified and directed.

Fabrication only for Steel work in (hallow sections viz square, rectangular and tubular) trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confoRMing to IS: 1161-1979 grade St. 240, etc complete all as spd and directed.

M&L for hardcore of guage exc 63 mm deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface all as specified and directed.

S&F in repair GI water tubing medium grade 15 mm dia with all fittings laid in floor or fixed in walls complete all as specified and as directed.

S&F in repair GI water tubing medium grade 20 mm dia with all fittings laid in floor or fixed in walls complete all as specified and as directed.

S&F GI water tubing medium grade 20 mm dia with all fittings laid in floor or fixed in walls complete all as specified and as directed.

S&F in repairs sinks (matt finish) with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and waste pipe, including bedding in cement mortar to dwarf wall or fixing cast iron cantilever brackets and connecting union to pipe overall size 915x460 mm and bowl size 410x352x178 mm and PVC waste coupling 40 mm dia with check nut, complete all all as specified and directed. Make: Jayna Cat No. SBSD 05 or equivalent in Nirali, Franke, Neelkant, Diamond, Blue Star.

S&F in repairs vitreous China wash basin half pedestal, 500x400x185 mm size, white, including fixing accessories set, rack bolt and 32 mm dia bottle trap with waste coupling complete all as specified and as directed. Make: Parryware Cat No. C0460, C0316, C8302, T9911A1, T3201A1 or equivalent in Hindware, Neycer, Cera, Johnson.

S&F in repairs vitreous China wash down water closet pan (Pedestal Pattern) (EWC) white, including fixing bolts, plastic water closet seat, white, closed pattern, solid type with flat bottom and cover and mild steel chromium plated hinging device, & connection to P/S trap, PVC valveless, syphonic action type low level flushing cistern 10 litre capacity, white, with inlet, ball valve, float, handle including brackets, and flushing pipe 32 mm dia etc complete all as specified and as directed. Make: EWC and Flushing cistern - Parryware cat No. C 0297/78 and C 8094 (for WC & seat cover) and C 8090/C8055 (Flushing cistern Economy single flush) or equivalent in Hindware, Neycer, Cera.

S&F PVC valveless syphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle including brackets and 32mm PVC flush pipe in repairs. Make: Flushing cistern - Parryware cat No. C 8090/C8055 (Flushing cistern Economy single flush) or equivalent in Hindware, Neycer, Cera.

S&F Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls,ceilings or in floors etc., Bore of pipes in 32mm, etc completed all as spd and directed.

S&F Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls,ceilings or in floors etc., bore of pipes in 40mm, etc completed all as spd and directed.

S&F in repairs 15 mm bore Swan neck pillar taps, brass chromium plated, with left hand operating knob with 450 mm long braided hose complete all as specified and directed. Make: Essco No. MQT 510 KN or an equivalent series/model in Marc, Parryware, Neycer, Johnson, Hindware, Aluminium Udyog (Kunchal).

S&F in repairs 15 mm bore, bib tap with wall flange, long body, fancy type, brass chromium plated, with crutch handle, screwed down for iron pipe and fixed etc. complete all as specified. Make: Essco MQT 512KN or equivalent series/model in Marc/Johnson/ Hindware/ Parryware

S&F PVC connection 15mm size with PTMT nuts of length 450mm.

S&F 15mm dia brass Stop valves screwed down, high pressure, screwed both ends for iron pipe or for union.

S&F 1000 litre capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including dismantling old RCC tank of any capacity.

S&F in repair 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe.

S&F 20mm dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed as in repairs

M&L PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in coping/ bed block including form work complete all as specifed and directed.

S&F 110 mm bore PVC vent cowl complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L for screed bed or bedding layers of cement mortar 1:6, 15 mm thick for laying floor finishes all as specified and directed.

M&L for glazed digital coloured ceramic tiles in vertical surfaces 300x450x7 to 8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with the colour of the tile all as specified and directed.

M&L for non skid digital coloured ceramic tiles 400x400x7 to 8 mm thick (min size) as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tile complete all as specified and directed.

M&L for granite jet black 18-20 mm thick factory polished fixed with cement mortar and pointed with coloured pigment to match the surface for shelves including grinding and polishing complete as in shlves including rounding to edges of stone slabs all as specified and directed.

M&L for granite jet black 18-20 mm thick factory polished fixed with cement mortar and pointed with coloured pigment to match the surface for floor etc including cutting to shape, grinding, polishing bulnosing all as specified and directed.

M&L for machine cut Kota stone slab flooring of size 560-600x560-600x18-20 mm thick laid over cement screed base and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing, complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations

S&F floor mounted coupled water closet with UF seat cover, hinges accessories set, Trap, cistern with fittinfs complete all as specified and directed. Make : Jaquar Cat No: LYS WHT 38751S & 38201

S&F 20 mm dia brass CP 60 cm long fancy type, tubular towel rail including taking down old towel rail. Make: Jaquar AC 1111NM or an equivalent series/model in Marc/ Johnson/Hindware

S&F soap dish with holder, fixed with brass screws or embedded in wall. Make: Jaquar AC 1131N or an equivalent series/model in Marc/ Johnson/Hindware

S&F concealed angular stop cock brass chromium plated for 15 mm bore screwed down high pressure with crutch handle screwed both ends for iron pipe or for unions. Make: Essco DLX 526KN or equivalent series/model in Marc/ Johnson/Hindware/ Parryware

S&F in repair brass CP hand shower (health faucet) with 8 mm dia 1.2 m long flexible tube and brass CP wall hook as specified. Make: Jaquar Cat No ALD-573 or an equivalent series/model in Marc/ Johnson/Hindware/ Parryware

Taking down of cement plaster on brick or stone walls/ ceiling etc. including raking out joints, hacking for key, scrubbing down with water, etc.,

M&L Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surface on wall, finished even and smooth without using extra cement with water proofing compound Note : WPC will be measured and paid separately

M&L for rendering 5mm thick on fair faces of concrete surfaces in CM 1:3 and finished even and smooth in ceiling, chajja, edges of roof etc (with chiken wire mesh fixing to existing steel) without using extra cement complete all as specified and directed.

M&L for rendering 5mm thick on fair faces of concrete surfaces in CM 1:3 and finished even and smooth in ceiling, chajja, edges of roof etc without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth with out using extra cement all as specified and directed.

Complete removal of wall finishes of wall surfaces and applying two coats of OBD on internal wall surfaces on 2.5mm thick wall care putty & after preparation priming plastered and other surfaces with alkali resistant primer.

All as per item No 68 above but on ceiling complete all as specified.

Complete removal of existing treatment on walls and applying two coats of cement base paint over one coat of alkali resistant primer compelete all as directed.

M&L for preparation of two coat of cement base paint over a coat of alkali resistant primer on newely plastered surfaces of walls complete all as directed.

S&F framed work such as grills, gratings, etc. with ends of bars shouldered and or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290, Gde E-165, etc complete all as spd and directed.

Dismantling of wall and ceiling boards (fibre, puop, insulation, etc) or insulation boards, slabs, blankets any thickness, including cover fillets and existing frame complete all as specified and directed.

S&F to true horizontal level 600x600mm panels false ceiling system manufactured by using hot dipped galavnized steel sections exposed surface with precoated capping, Main Tee of size 24x32mm at every 1200mm C/C maximum, rotary stitched cros Tee of size 24x27mm at every 1200mm C/C and wall angle of size 19x19mm fixed to perimetre wall. The complete grid is to be suspended at every 1200mm C/C in both directions by using 2mm dia pre straightened GI wire at every 1200mm internal at the main Tee using fine finished tagular edge complete all as specified. Note: The sizes of above grid system shall vary slightly according to manufacturer norms. Make: Saint Gobian or Armstrong or USG Boral.

S&F of 9 to 9.5 mm thick Gypsum boards of size 600x600mm with rear side Aluminium foil and front side PVC lamination complete all as specified and directed. Make: Gyproc Polyshield tile from Saint Gobian or equivalent in Armstrong or USG Boral.

Fixing only Gypsum boards obtained from dismantling (SI item No. 73 above) complete all as directed.

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm C/C, intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm C/C with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm C/C and for Hangers 6mm dia. GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long, including dismantling the existing Grid etc complete, all as specified and directed. Note: The sizes of above grid system shall vary slightly according to manufacturer norms. Make: Saint Gobian or Armstrong or USG Boral.

S&F Gypsum Board plain 12-12.50 mm thick in ceiling fixed with screw as per manufacturers instructions etc completed all as specified. Make: Gyproc from Saint Gobian or equivalent in Armstrong or USG Boral.

S&F 10mm thick plaster of paris ceiling (Gypsum anhydrous) to curved surface over 2nd class soft wood fillets, or metal frame work and reinforced with GI wire mesh (fillets, metal frame work and GI wire mesh paid separately) etc completed all as specified.

S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates (using medium wt and above sections) including joining cleat for fixing, etc complete, as specified and directed.

S&F 200mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches or in floors incl taking down existing u/s pipe.

S&F for PVC (SWR) bends any radius, bore of pipe in 110mm, etc complete all as specifed and directed.

S&F box type steel windows/ventilators double rebate 80x45x1.25 mm CRCA sheet for frame section, 40x20x1 mm for glazed and mesh shutters, Sash bar T6 for glazed shutter, 15x3 mm flat for mesh shutter with beading for fixing wire mesh, 10x10 mm square bars @ 150 c/c for grill, box hinges, flat latches, handle, telescopic stay, 4 mm thick float glass, Galvanised MS wire cloth 0.56 mm nominal dia with 1.18 mm aperture, hold fast as per standard size of manufacturer and two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. Note: Hinges, latches, handle, telescopic stay, float glass, wire cloth, hold fast, synthetic enamel paint and primer shall not be measured and paid seperately and is deemed to be included in the quoted rate.

S&F 300 mm aluminium alloy, anodised, sliding door bolt with hasp & staple (Bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section of cast aluminium alloy complete all as specified and as directed.

S&F in repairs Galvanised MS wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples etc.complete all as specified and as directed.

S&F in repairs stainless steel gratings 125mm dia, complete all as specified and as directed.

S&F Vitreous china urinal, flat back large of size 635x395x420 mm white, complete including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60 mm brass screws, pointing around urinal back in white cement, complete all as specified and as directed including taking down old urinal. Make: Cera Cat No 5001 with complete fittings or equivalent Neycer, Hindware, Parryware, Jaquar.

S&F bottle trap 32 mm of PTMT having minimum water seal of 25mm. (Minimum weight 260gms)

Cutting out V groves along the cracks to full depth of the crack, removing plaster to a width of 25cm along the line of crack, filling the V groves with cement mortar 1:3, providing wire netting of galvanised steel wire 0.71mm dia, 12mm mesh fixed with tinned tacked of wire staples in the area where the plaster is removed and redering the area with cement mortar 1:4, 15mm thick all as specified.

Taking down point wiring of any type complete for light, fan, socket or power point with fittings & fixtures and issue under schedule of credit to contractor including making good disturbed surface to match the existing surface complete all as specified and directed.

Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as per existing at site including making good the disturbed surfaces to match with the existing finishes all as specified.

Taking down and refixing of light fitting of any type and any capacity in the same location/ in specified location, all as specified and directed.

M&L for point wiring (in concealed conduit) with 1.5 sq mm copper conductor single core PVC insulated (FRLS) unsheathed 1100 Volts multistranded drawn through and including non metallic rigid PVC conduit and conduit accessories of 20 mm dia medium grade ISI mark and pressed steel terminal box of 2.0 mm, MS suitable size, duly painted with red oxide primer including fixing/grouting sunken/surface as per site requirement covered with 3 mm thick laminated hylam sheet including running up of 1.5 sq mm copper conductor PVC wire earth continuity conductor alongwith wiring and connecting to the common earth dolly including cutting, chasing and making good the disturbed surface to match with existing as specified for one light point, ceiling fan, exhaust fan point controlled by one way switch switch 5/6 A, SP.

All as per SI item No 93 above but one 3 pin 6 A switch socket point controlled by one switch on independent board.

All as per SI item No 93 above but one 3 pin 6 A socket point on same board with other switch.

All as per item No 93 above but for one 3/5 pin 15 Amp socket outlet point controlled by one switch using 2.5 sqmm copper conductor cable with continuous earth wire of 2.5 sqmm copper conductor on independent board complete all as specified and directed.

M&L for point wiring (in concealed conduit) with 1.5 sq mm copper conductor single core PVC insulated (FRLS) unsheathed 1100 Volts multistranded drawn through and including non metallic rigid PVC conduit and conduit accessories of 20 mm dia medium grade ISI mark and pressed steel terminal box of 2.0 mm, GI factory made including fixing/grouting sunken/surface as per site requirement and covered with suitable PVC modular covers and modular cover plates including running up of 1.5 sq mm copper conductor PVC wire earth continuity conductor alongwith wiring and connecting to the common earth dolly including cutting, chasing and making good the disturbed surface to match with existing as specified for one light point, ceiling fan, exhaust fan point controlled by one way switch switch 5/6 A, SP.

All as per SI item No 97 above but one 3 pin 6 A switch socket point controlled by one switch on independent board.

All as per SI item No 97 above but one 3 pin 6 A socket point on same board with other switch.

All as per item No 97 above but for one 3/5 pin 15 Amp socket outlet point controlled by one switch using 2.5 sqmm copper conductor cable with continuous earth wire of 2.5 sqmm copper conductor on independent board complete all as specified and directed.

M&L for point wiring with single core PVC insulated unsheathed 1100 Volt grade cable with multistranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through any type of existing concealed/ surface conduit wiring and utilise the exiting MS terminal boxes duly painting required with red oxide metal primer, covered with 3 mm thick sheet cover of suitable size including suitable screws with washer for mounting switch sockets and regulators and drawing continuous earth wire with and including PVC insulated unsheathed 1100 Volts grade cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to common earth dolly complete all as specified and as directed for One light point controlled by one, one way switch 5 Amps, SP

All as per item No.97 above but for One Ceiling Fan / exhaust fan point controlled by one, one way switch and regulator

All as per item No.97 above but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board .

All as per item No.97 above but for One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

All as per item No.97 above but using 2.5 Sqmm single core copper conductor cable multistranded PVC insulated unsheathed 1100 volts grade for 3 pin 15 Amps switch socket combination point including running 2.50 Sqmm copper conductor PVC wire as earth continuity conductor on independant board.

S&F switch piano type, 6 A, 230 V AC, single pole, one way.

S&F switch socket combination 2 in 1, 3/2 pin with porcelain base, 5 A, 230 V, multipurpose flush type.

S&F switch socket combination 2 in 1, 3/5 pin, 5 & 15 A, 230 V, flush type universal

S&F Ceiling rose, 3 terminal, PVC polycarbonate, insulated body ISI marked.

S&F angle lamp holder pin type PVC / Poly carbonate body with back plate all as directed.

S&F stepped type (5 steps) electronic fan regulator, AC, 230 V, flush type, suitable for 1200/1400 mm sweep complete all as specified and directed.

S&F sheet metal enclosure for MCB DB SPN 8 way, 240 Volts, single phase, double door with IP-43 protection suitable for 200 Amps rated bus bar complete all as specified and directed. Make: Legrand, Schneider, ABB, Siemens, L&T.

S&F MCB SPN, 240 Volts, 6-32 A, C curve, all as specified and directed. Make: Legrand, Schneider, ABB, Siemens, L&T.

S&F sheet metal enclosure MCB DB TPN 4 way with 200 Amps rated bus bar 415 Volts double door with locking system complete all as specified. Make: Legrand, Schneider, ABB, Siemens, L&T.

S&F MCB TPN 415 Volts 'C' series suitable for fixing on MCB DB's of capacity 63 Amps complete all as specified. Make: Legrand, Schneider, ABB, Siemens, L&T.

S&F MCB TP 415 Volts 'C' series suitable for fixing on MCB DB's of capacity 63 Amps complete all as specified. Make: Legrand, Schneider, ABB, Siemens, L&T.

S&F MCB SP 240 Volts "C" series, suitable for fixing on MCB DB's of capacity 5 to 32 Amps complete all as specified. Make: Legrand, Schneider, ABB, Siemens, L&T.

S&F (on 2 Nos PVC round boxes) LED tube light fitting 1x20 W, 230 V including LED tube rod T8 1200 mm alongwith LED tube having system efficacy of 2100Lm and CCT-6500k, THD must be <15%, housing made of CRCA, LED life hours should not be less than 25k hours as per LM80 report, BIS mark is mandatory, supplier has to provide LM79/80 report, connecting upwith PVC copper conductor from ceiling rose complete all as specified and directed. Make: Philips Cat No. TMC 501 P 1xT LED 22W P 3241 & 20 W 865 T8 IND I, or equivalent in CG, Bajaj, Wipro

M&L for sub main wiring in concealed conduit including cutting, chasing, complete with 4 runs of 10 Sqmm single core HRFR, PVC insulated unsheathed cable 1100 V grade with multistranded copper conductor ISI marked drawn through in and including 32 mm dia PVC conduit of medium grade and conduit accessories of suitable size fixed on walls / roofs / floors etc with provision of two run of 10 Sqmm HRFR, PVC insulated unsheathed cable with multistranded copper conductor as earth continuity., including dismantling old sub main wiring and making good disturbed surfaces complete all as specified and as directed. Note: Six runs of 10 sq.mm copper cable and one run of PVC conduit and required conduit accessories shall be measured as one unit length.

M&L for sub main wiring in concealed conduit including cutting, chasing, complete with 2 runs of 6 Sqmm single core HRFR, PVC insulated unsheathed cable 1100 V grade with multistranded copper conductor ISI marked drawn through in and including 25mm dia PVC conduit of medium grade and conduit accessories of suitable size fixed on walls / roofs / floors etc with provision of one run of 6 Sqmm HRFR, PVC insulated unsheathed cable with multistranded copper conductor as earth continuity., including dismantling old sub main wiring and making good disturbed surfaces complete all as specified and as directed. Note: Three runs of 6 sq.mm copper cable and one run of PVC conduit and required conduit accessories shall be measured as one unit length.

M&L for sub main wiring in concealed conduit including cutting, chasing, complete with 2 runs of 4 Sqmm single core HRFR, PVC insulated unsheathed cable 1100 V grade with multistranded copper conductor ISI marked drawn through in and including 25mm dia PVC conduit of medium grade and conduit accessories of suitable size fixed on walls / roofs / floors etc with provision of one run of 4 Sqmm HRFR, PVC insulated unsheathed cable with multistranded copper conductor as earth continuity., including dismantling old sub main wiring and making good disturbed surfaces complete all as specified and as directed. Note: Three runs of 4 sq.mm copper cable and one run of PVC conduit and required conduit accessories shall be measured as one unit length.

Disconnecting and removing ceiling fan of 1200/1400 mm sweep any height from electrical connection bringing down, dismantling, cleaning internally and externally thoroughly examine replacement of split pins, cotter pins and check nuts etc overhauling, lubricating with approved lubricants, reassembling, including replacement of wornout/defective parts, refixing in original position including minor repairs for the smooth functioning and provision of new flexible wire of size 23/0.0076 multistranded copper conductor cable from ceiling rose to fan including painting of ceiling fan complete with synthetic enamel paint by spraying including filling cavities with filler , one coat after cleaning all dust etc and writing MES No with black paint and testing complete all as specified.

S&F 36 W high efficient LED Street light fixture (as security light) with aluminium pressure die cast housing for long life, system efficiency ≥120 lm/W, system Lumens 3000 lm, high purity polycarbonate/glass diffuser, with silicon gaskets for IP66 protection, IK07, in built electronic driver with 4 kV surge protection has features of constant current with low/over Voltage protection with phase to phase 440 V protection for 8 Hrs, duly wired up to terminal block, surge protection in 4 kV, driver efficiency >88%, power factor > 0.95, THD <10% LED Make : Nichia/ Cree/ Osram/ Lumiled, colour rendering index CRI >70, temp range 0 to 45 degree centigrade, CCT 5700k-6500K, LED life 50000 burning hrs (min) as per L70 B50, photo biological safety report as per IEC 62471 & electrical insulation class 1, Voltage range 110-270 V AC and safety on low Voltage/high Voltage. LM79 & LM 80 certification. BIS R No. is mandatory for LED light fixtures/drivers and fixture shall be fitted to GI bracket 40 mm dia, light grade, min 1.5 m length, bent to shape required as per site and quoted rate is deemed to be included pron of GI pipe with brackets, nuts and bolts. Make:- Philips model No. BRP046 LED 36 CW MR S1 PSU GR or equivalent model of Wipro, Bajaj, CG

Supply and lay light grade GI tubing of 40 mm dia, protection of the cable all as specified as directed.

M&L for Earthing complete with GI earth plate electrode 600x600x6 mm thick buried directly in ground vertically to a depth of not less than 2.25m deep below ground level with the top edge of earth plate at a depth of not less than 1.5m below ground level connected to GI earth wire 4mm dia by means of bolts, nuts, washers of galvanised iron or steel, GI earth wire shall be protected by 15mm dia GI pipe 'light grade', watering pipe 20mm dia GI pipe 'medium grade', GI wire meshed funnel, alternate layer of charcoal and salt on all side to earth plate upto a thickness of 150mm, and connected to earth plate including necessary excavation & earthwork, PCC 1:3:6 type C-1 earth chamber, 40mm thick RCC cover 1:2:4 type B1 mix with 8mm dia TMT bars @ 100mm c/c both ways etc complete all as shown in electrical Plate No.3 connected to earthing test point, complete including testing on completion all as speciified and as directed. Note: Quoted rate shall deemed to include the cost of excavation and earth work in any type of soil.

Supply, lay, test and commissioning ISI marked XLPE insulated, screened, armoured, electric power cables (heavy duty) with aluminium conductor, 1100 Volts, grade cross sectional area 50 sq mm, 3.5 core complete all as specified and as directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m deep and getting out in hard/dense soil complete all as specified and as directed.

Supply and spread approved dry river sand/M sand for cable laying /foundations/Cable duct including watering and consolidation, cushioning of cable laid in trenches complete all as directed. Note:- Punned thickness will be measured for payment purpose

Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.

Supply & Lay PCC cable covers for LT cable protection, Class LV, Type 1 of size 250x150x40 mm (ISI marked)

S&F sheet metal enclosure with 2 pole and earth metal plug & Socket including 20A SP MCB "C" series complete including taking down unserviceable enclosure all as directed. .

Cutting chases, pining in making good to facing where required and pointing in cement mortor 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and and cutting chases for concealed conduit wiring etc making good, cutting exceeding 10cm girth but not exc 20 cm girth all as specified and directed.

S&F 2'x2' recess mounted full glow LED luminaire with white powder coated housing acting as heat sink and frame in CRCA sheet, high efficiency LED grade diffuser, in built electronic driver duly wired up to terminal block, power consumption <42W, luminaire lumen > 5000 lm and system efficiency >120lm/W, CRI>80, LED Make:- Nichia/ Cree/ Osram/ Lumiled only with LED binning as per ANSI Bin C78.377A, photo biological safety report as per IEC62471 & electrical insulation class 1, colour temp 6500K, Ingress protection IP 20, driver efficiency >85%, 50,000 burning hours (min) as per L70 criteria, ambient temp 0 to 50 degree centigrade, power factor >0.95, THD < 10%, surge protection 3 kV, two stages isolated constant current operated driver with voltage range 120-270V AC and safety extra low Voltage safe level <60V DC as per IEC standard, with LM79 & LM80 certification. Make:- Philips Model No. RC380B LED42S -6500 G4 L60 W60 PSD OD or equivalent model of CG, Wipro, Bajaj.

S&F MCCB TP 125Amp, 16 kA operated at 415 Volts, 50 Hz AC supply suitable to fitted in LT panel complete all as specified.

S&F exhaust fan 300 mm sweep, iron body heavy duty single phase 50 Hz, 1400 rpm, AC with louver and connecting up with and including provision of PVC insulated copper flexible cord of size 23/0.019, 3 core from ceiling rose to connection of exhaust fan complete all as specified. Note: quoted rate includes making hole to existing wall.

S&F exhaust fan 230 mm sweep, iron body heavy duty single phase 50 Hz, 1400 rpm AC with louver and connecting up with and including provision of PVC insulated copper flexible cord of size 23/0.019, 3 core from ceiling rose to connection of exhaust fan complete all as specified. Note : quoted rate includes making hole to existing wall.

S&F sheet metal enclosure vertical type MCCB DB TPN 4 Way with 200 Amps rated bus bar 415 Volts suitable for and including 125 Amps TP MCCB 16 kA as incommer complete al as specified . Note : MCB SP shall be measured and paid seperately.

S&F Switch Modular type single pole one way 6 Amps capacity 230 Volts.

S&F Switch Modular type single pole one way 16 Amps capacity 230 Volts.

S&F Modular socket 6 Amps -2/3 pin 2 module of capacity 230 Volts

S&F socket Modular type multipurpose 2/3 pin combined 16 Amps, 230 Volts complete all as specified.

S&F in repair Vertical type MCB DB TPN, 12 way, double door with and including incoming MCB TPN 415 Volts AC, 3 phase, 50 Hz, 63 Amps made out of CRCA sheet housing with powder coating complete all as specified and directed.

S&F LED recess mounted round panel with aluminium die cast housing downlights of capacity 15 Watt type fitting including making electric connection complete all as specified and directed. Make: Philips model No. DN296B LED15S-6500 PSU WH or equivalent model of Wipro, Bajaj, CG

Disconnect electrical connection, removing copper line, discharge line of split type AC/casette type AC up to 3 Ton capacity including indoor and out door units and all accessories and shifting/reinstalling and testing the whole unit of AC in new/same location with suitable size and length of copper pipe including topup of gas filling (R22/R32/A410) and making the holes in walls and matching with the existing surface complete all as specified. General notes for BOQ:- i) BOQ is the combination of Spl repairs to GC mess bldg. and Spl repair to roof of bldg. No. E-47. ii) Work at GC mess bldg shall be carried out at normal height. iii) Work at E-47 bldg shall be carried out at height of 7 to 9 m. iv) Bidders must see this aspect while quoting the unit rate of each item of BOQ.

Sri Associates

Saiansh Associates

saradhi construction combines

BUILDWEL