NOTICE INVITING ELECTRONIC TENDER No. 08 of 2025-26 OF THE ASSISTANT ENGINEER, PWD, ALIPURDUAR SUB DIVISION.

Supplying profiles of required section made of Aluminium Alloy Extrusions conforming toIS:732-1983andIS:1285-1975; Annodized (with required film thickness and specified colour/natural)matt finished conforming to IS:1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed/certified make and brand as per direction of Engineer-In-Charge. (Payment will be made on finished length of the work). (A) In 10-12 Micron thickness Annodizing film I) Natural white j) Fixed partitions. (Unsupportedlengthofverticalmemberupto1.5mtr.Heightofbothends of vertical member restrained but panels within 0.9 sq.m.) i) Top , bottom & side member First Floor

ii) Intermediate member First Floor

iii) Glazing clip. First Floor

Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS:732-1983 and IS:1285-1975; Annodized (with required film thickness and specified colour/natural) mattfinished conforming to IS:1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed/certified make and brand as per direction of Engineer-In-Charge (A) In 10-12 Micron thickness Annodizing film I) Natural white k) Movable door shutter. i) Door frame. (Top & sides). First Floor

ii) Shutter : Top rail. First Floor

ii) Shutter : Bottom rail. First Floor

ii) Shutter : Lock rail First Floor

ii) Shutter : Door vertical. First Floor

ii) Shutter : Glazing Cleap First Floor

Wall panelling / partition with Melamine faced 3 layered flat pressed wood particle board of approved make and brand as per direction of Engineer-in-Charge of requisite grade bonded with phenol formaldehyde synthetic resin conforming to IS:848-1974 (excluding the cost of supporting frame work and teak wood battens / lipping (B)Prelaminated particle board conforming to IS: 3087-1985 and IS 12823 :1990. (ii) Both side decorative laminate (b) Interior Grade 12mm thick First Floor

Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units: (B) Partly glazed partly panelled or fully glazed single leaf alunminium swing door made of extruded and annodized alloy aluminium sections, fabrication including cutting to proper shape and size, drilling and aligning, fitted with heavy duty hydraulic action floor sping placed in the floor with mending damages, with top pin assembly of approve make and brand, fitted with in built locking arrangement, flush bolt, glazing clips and all other necessary fittings, fixtures, adhesive sand joineries, cutting glass of approved make to requisite shape and size fitting with dry set neopreneor EPDM gasketing, cutting to requisite shape and size panel board (prelaminated particle block) fixing them with glazing clips as per drawing, specification and direction of Engineer in charge. First Floor

Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fittedand fixed with cadmium plated screws: (ix) 125 x 75 x 4.0mm. First Floor

Anodised aluminium Aldrop / Sliding bolts of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 2681/66) fittedand fixed complete (ii) 250mm x 19mm dia. Bolt First Floor

ii) Godrej Hydraulic door closer fitted and fixed complete (b) Medium type First Floor

Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fittedand fixed complete: (a) With continuous plate base (Hexagonal/ Round rod (vii) 150 mm grip x 12 mm dia rod. First Floor

Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws: (viii) 225mm long x 12mm dia. bolt. First Floor

(ii) Door stopper (Anodised aluminium) First Floor

Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface. Two Coats First Floor

(b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc First Floor

(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary (a) On timber or plastered surface : With super gloss (hi-gloss). (iv) Two coats (with any shade except white) First Floor

Add GST @18.00 %

Add Labour welfare Cess @1.00 %

Please Enable Macros to View BoQ information