Providing and Installation of LED Bill Boards and Enhancement of Tourist/ Pilgrims Experience to Temple from Mubarikpur to Bharwain (SITC of small decorative lighting of gate at Bharwain)

Amount

LED FLOOD LIGHT WITH SNOOT - Supply Instalation testing & commissioning of LED FLOOD LIGHT RGBWW Tunable white (2700k -6500k) with SDCM≤2, @ warm white enabled with high power LEDs & anti-aging and anti-UV high optical efficiency temperature -resistant lenses, surface mounted Narrow/ Medium/ Wide beam luminaire suitable for outdoor applications of Façade Lighting, depending on design and site requirement, with Die-cast aluminium housing, powder-coated finish , Power consumption should be 20W at steady state full intensity, Luminaire luminous flux range of >=1800 Lm. Color rendering index CRI ≥ 80 for white LEDS's and power factor of complete luminaire ≥ 0.90, at full intensity. Luminaire should be provided with suitable integral/separate non-integral power supply unit. Lumen maintenance of at least L70@50,000 burning hours at 25°C. Ingress Protection ≥ IP 66. Impact resistance level ≥ IK 07. Adequate heat sink with proper thermal management shall be provided. Operating Temperature: -35°C to +50°C, Operating Humidity : 10%-90%. THD should be less than 10%. Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements. The fixtures proposed must have passed LM 79 & LM-80, Reports from NABL laboratory. The fixtures must be BIS Certified. Soft copy of IES file should be submitted along with bid. works as per specified in Drawing, complete as per direction of Engineer-in- charge. The Rate is inclusive of octroi, royality, malkana, toll tax, GST or other Taxes as imposed by the Government. * Make of LEDs -LEDs of CREE / OSRAM /NICHIA/ PHILIPS/ WIPRO. Makes of fixtures- JAQUAR Philips (CK series only), Wipro, Panasonic. NOTE - Minimum 5 years warranty required.

LED WALLWASHER WITH VISOR - Supply Instalation testing & commissioning Linear luminaire 500mm RGBWW Tunable white(2700-6500k) with visor @ warm white with SDCM ≤2), enabled with high power LEDs & anti-aging and anti-UV high optical efficiency temperature -resistant lenses, provided with visor, surface mounted Narrow/Medium/Wide/Elliptical beam luminaire suitable for outdoor applications of Façade Lighting, depending on design and site requirement, with heavy duty extruded aluminum construction housing, powder-coated finish , Power consumption should be 18W at steady state full intensity, Luminaire luminous flux range of 1260-1300 Lm. Color rendering index CRI ≥ 80 for white LEDS's and power factor of complete luminaire ≥ 0.90, at full intensity. Luminaire should be provided with suitable integral/separate non-integral power supply unit. Lumen maintenance of at least L70@50,000 burning hours at 25°C. Ingress Protection ≥ IP 66. Impact resistance level ≥ IK 07. Adequate heat sink with proper thermal management shall be provided. Operating Temperature : -40°C to +50°C, Operating Humidity : 10%-90%. THD should be less than 10%. Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements. The fixtures proposed must have passed LM 79 & LM-80, Reports from NABL laboratory. The fixtures must be BIS Certified. Soft copy of IES file should be submitted along with bid. works as per specified in Drawing, complete as per direction of Engineer-in- charge. The Rate is inclusive of octroi, royality, malkana, toll tax, GST or other Taxes as imposed by the Government. * Make of LEDs -LEDs of CREE / OSRAM /NICHIA/ PHILIPS/ WIPRO. Makes of fixtures- Makes of fixtures- JAQUAR Philips (CK series only), Wipro, Panasonic. NOTE - Minimum 5 years warranty required.

LED FLOOD LIGHT WITH SNOOT- Supply Instalation testing & commissioning of LED Mini FLOOD LIGHT RGBWW Tunable white(2700k-6500) @ warm white with SDCM≤2, enabled with high power LEDs & anti-aging and anti-UV high optical efficiency temperature -resistant lenses, surface mounted Narrow/ Medium/ Wide beam luminaire suitable for outdoor applications of Façade Lighting, depending on design and site requirement, with Die-cast aluminium housing, powder-coated finish , Power consumption should be 6W at steady state full intensity, Luminaire luminous flux range of >=500 Lm. Color rendering index CRI ≥ 80 for white LEDS's and power factor of complete luminaire ≥ 0.90, at full intensity. Luminaire should be provided with suitable integral/separate non-integral power supply unit. Lumen maintenance of at least L70@50,000 burning hours at 25°C. Ingress Protection ≥ IP 66. Impact resistance level ≥ IK 07. Adequate heat sink with proper thermal management shall be provided. Operating Temperature: -40°C to +50°C, Operating Humidity : 10%-90%. THD should be less than 10%. Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements. The fixtures proposed must have passed LM 79 & LM-80, Reports from NABL laboratory. The fixtures must be BIS Certified. Soft copy of IES file should be submitted along with bid. works as per specified in Drawing, complete as per direction of Engineer-in- charge. The Rate is inclusive of octroi, royality, malkana, toll tax, GST or other Taxes as imposed by the Government. * Make of LEDs -LEDs of CREE / OSRAM /NICHIA/ PHILIPS/ WIPRO. Makes of fixtures- Makes of fixtures- JAQUAR Philips (CK series only), Wipro, Panasonic. NOTE - Minimum 5 years warranty required.

LED WALLWASHER WITH VISOR - Supply Instalation testing & commissioning Linear luminaire 300mm RGBWW Tunable white(2700-6500k) with visor @ warm white with SDCM ≤2), enabled with high power LEDs & anti-aging and anti-UV high optical efficiency temperature -resistant lenses, provided with visor, surface mounted Narrow/Medium/Wide/Elliptical beam luminaire suitable for outdoor applications of Façade Lighting, depending on design and site requirement, with heavy duty extruded aluminum construction housing, powder-coated finish , Power consumption should be 18W at steady state full intensity, Luminaire luminous flux range of 1260-1300 Lm. Color rendering index CRI ≥ 80 for white LEDS's and power factor of complete luminaire ≥ 0.90, at full intensity. Luminaire should be provided with suitable integral/separate non-integral power supply unit. Lumen maintenance of at least L70@50,000 burning hours at 25°C. Ingress Protection ≥ IP 66. Impact resistance level ≥ IK 07. Adequate heat sink with proper thermal management shall be provided. Operating Temperature : -40°C to +50°C, Operating Humidity : 10%-90%. THD should be less than 10%. Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements. The fixtures proposed must have passed LM 79 & LM-80, Reports from NABL laboratory. The fixtures must be BIS Certified. Soft copy of IES file should be submitted along with bid. works as per specified in Drawing, complete as per direction of Engineer-in- charge. The Rate is inclusive of octroi, royality, malkana, toll tax, GST or other Taxes as imposed by the Government. * Make of LEDs -LEDs of CREE / OSRAM /NICHIA/ PHILIPS/ WIPRO. Makes of fixtures- Makes of fixtures- JAQUAR Philips (CK series only), Wipro, Panasonic. NOTE - Minimum 5 years warranty required.

LED LINEAR INGROUND FIXTURE - Supply Instalation testing & commissioning Linear luminaire 1000mm WW with Honey comb louver @ warm white with SDCM ≤2), enabled with high power LEDs & anti-aging and anti-UV high optical efficiency temperature -resistant lenses, provided with visor, surface mounted Narrow/Medium/Wide/Elliptical beam luminaire suitable for outdoor applications of Façade Lighting, depending on design and site requirement, with heavy duty extruded aluminum construction housing, powder-coated finish , Power consumption should be 48W at steady state full intensity, Luminaire luminous flux range of 3360 Lm. Color rendering index CRI ≥ 80 for white LEDS's and power factor of complete luminaire ≥ 0.90, at full intensity. Luminaire should be provided with suitable integral/separate non-integral power supply unit. Lumen maintenance of at least L70@50,000 burning hours at 25°C. Ingress Protection ≥ IP 67. Impact resistance level ≥ IK 10. Adequate heat sink with proper thermal management shall be provided. Operating Temperature : -40°C to +50°C, Operating Humidity : 10%-90%. THD should be less than 10%. Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements. The fixtures proposed must have passed LM 79 & LM-80, Reports from NABL laboratory. The fixtures must be BIS Certified. Soft copy of IES file should be submitted along with bid. works as per specified in Drawing, complete as per direction of Engineer-in- charge. The Rate is inclusive of octroi, royality, malkana, toll tax, GST or other Taxes as imposed by the Government. * Make of LEDs -LEDs of CREE / OSRAM /NICHIA/ PHILIPS/ WIPRO. Makes of fixtures- Makes of fixtures- JAQUAR Philips (CK series only), Wipro, Panasonic. NOTE - Minimum 5 years warranty required.

LED LINEAR Neon FLEX - Supply Instalation testing & commissioning Linear Neon flex luminaire 12mm(section size linear flex made up high grade flexible sillicon RGBW @warm white with SDCM ≤2), enabled with high power LEDs & anti-aging and anti-UV high optical efficiency temperature -resistant lenses, provided with visor, surface mounted Narrow/Medium/Wide/Elliptical beam luminaire suitable for outdoor applications of Façade Lighting, depending on design and site requirement, with heavy duty extruded aluminum construction housing, powder-coated finish , Power consumption should be 13W at steady state full intensity, Luminaire luminous flux range of 70 Lm/w. Color rendering index CRI ≥ 80 for white LEDS's and power factor of complete luminaire ≥ 0.90, at full intensity. Luminaire should be provided with suitable integral/separate non-integral power supply unit. Lumen maintenance of at least L70@50,000 burning hours at 25°C. Ingress Protection ≥ IP 67 Impact resistance level . Adequate heat sink with proper thermal management shall be provided. Operating Temperature : -40°C to +50°C, Operating Humidity : 10%-90%. THD should be less than 10%. Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements. The fixtures proposed must have passed LM 79 & LM-80, Reports from NABL laboratory. The fixtures must be BIS Certified. Soft copy of IES file should be submitted along with bid. works as per specified in Drawing, complete as per direction of Engineer-in- charge. The Rate is inclusive of octroi, royality, malkana, toll tax, GST or other Taxes as imposed by the Government. * Make of LEDs -LEDs of CREE / OSRAM /NICHIA/ PHILIPS/ WIPRO. Makes of fixtures- Makes of fixtures- JAQUAR Philips (CK series only), Wipro, Panasonic. NOTE - Minimum 5 years warranty required.

LED PROJECTOR SPOT WITH SNOOT - Supply Instalation testing & commissioning of LED Projector spot RGBW with SDCM≤2, @ warm white enabled with high power LEDs & anti-aging and anti-UV high optical efficiency temperature -resistant lenses, surface mounted Narrow/ Medium/ Wide beam luminaire suitable for outdoor applications of Façade Lighting, depending on design and site requirement, with Die-cast aluminium housing, powder-coated finish , Power consumption should be 27W at steady state full intensity, Luminaire luminous flux range of >=1800 Lm. Color rendering index CRI ≥ 80 for white LEDS's and power factor of complete luminaire ≥ 0.90, at full intensity. Luminaire should be provided with suitable integral/separate non-integral power supply unit. Lumen maintenance of at least L70@50,000 burning hours at 25°C. Ingress Protection ≥ IP 66. Impact resistance level ≥ IK 07. Adequate heat sink with proper thermal management shall be provided. Operating Temperature: -35°C to +50°C, Operating Humidity : 10%-90%. THD should be less than 10%. Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements. The fixtures proposed must have passed LM 79 & LM-80, Reports from NABL laboratory. The fixtures must be BIS Certified. Soft copy of IES file should be submitted along with bid. works as per specified in Drawing, complete as per direction of Engineer-in- charge. The Rate is inclusive of octroi, royality, malkana, toll tax, GST or other Taxes as imposed by the Government. * Make of LEDs -LEDs of CREE / OSRAM /NICHIA/ PHILIPS/ WIPRO. Makes of fixtures- Makes of fixtures- JAQUAR Philips (CK series only), Wipro, Panasonic. NOTE - Minimum 5 years warranty required.

Supply Installation Testing and Comissioning of Main controller - DMX 512 Ethernet based controller capable of handling 1024 address having in built Astronomical clock so that by default scenarios can be planned as per the time zone

Supply Installation Testing and Comissioning of Splitter - 8 channel splitter of LED lights

Supply Installation Testing and Comissioning of Power supply - Meanwell IP68 Power supply 200w 24vDC

Supply and Installation of Extruded aluminium profile with section size 12x12 mm

Supply and Installation of 260x160mm junction box

Supply and Installation of 150x150 mm junction box

Supply and Installation of FRRP conduit pipe

Supply and Installation of HDPE conduit

Supply Installation Testing and Comissioning of Power Feder pannel

Supply Installation Testing and Comissioning of DMX ENCLOSURE

Providing & Laying of copper conductor, flexible cable PVC sheathed Multistranded Cable for voltage grade upto 1100V Confirming to IS-694:2010 of following sizes on wall surface as required.(4 core 1 sqmm copper cable)

Providing & Laying of copper conductor, flexible cable PVC sheathed Multistranded Cable for voltage grade upto 1100V Confirming to IS-694:2010 of following sizes on wall surface as required.(3 core 2.5 sqmm copper cable)

KAMAL ELECTRONIC AND ELECTRICAL

Krishan Pal