Maintenance of Civil Carpentry works, PH works, cleaning and water proofing works at CISF Campus, North Gate portals and other building inside BARC, Trombay, Mumbai for year 2023-2025.

Amount

From 0.00 to 1.50 m depth from Average Ground Level.

From 1.50 to 3.00 m depth from Average Ground Level.

Lead charges for 1st 1 KM or part thereof, by mechanical transport including loading unloading, stacking / levelling etc. Note: The rates in respect of this Item are applicable for NET Quantities arrived at after making deduction for voids @ 20% in respect of soil from corresponding STACK / TRUCK Measurement

Providing and laying in position cement concrete of 1:3:6 (1 cement, 3 crushed sand, 6 graded stone aggregate of maximum size 20 mm) including consolidation, finishing, curing etc. complete as per specificationsand drawings but excluding the cost of Form work shuttering, centering Complete at all levels.

Providing and laying in position cement concrete of 1:2:4 (1 cement, 2 crushed sand, 4 graded stone aggregate of nominal size 20 mm) including consolidation, finishing, curing etc. complete as per specification and drawings but excluding the cost of Formwork shuttering, centering and steel reinforcement at all Levels.

Providing Reinforcement Steel for reinforced cement concrete at all levels including supplying, preparation of bar bending schedules, cutting, bending, transporting, fixing, tieing in position with PVC coated G.I binding wire, all labour charges, cost of cover blocks in specified grade of concrete etc. complete as per specifications and drawings. Steel supplied by the contractor

Using TMT bars of specified grades all dia bars. TMT bars to be supplied by the contractor confirming to IS:1786.

Providing Structural steel work in M.S Plain Plates and chequrred Plates for Embedded Parts, Trench Covers, Connection plates etc.including cutting, hoisting, fixing in position and applying a priming coat of approved zinc chromate steel primer etc.including cost of structural steel Plates, welding all labour charges etc. complete as per drawings and specifications.

Using materials of approved manufacturers Confirming to IS: 2062. All test reports to be provided along with the supply of the materials. Notes: 1. Structural steel confirming to IS 2062 shall be supplied.2. Welding weights, connections, bolts and nuts shall not be measured for payment but the cost of which shall be deemed to have been included in the rates.3. Welding Electrodes manufactured by M/s. Advani Oerlicon / ESAB India & D& H of specified suitable grade only shall be used.4. Holes to be drilled only by Drilling machines and gas cutting of holes are not permitted .5. Rate inclusive of all consumables like GAS, welding electrodes and tools and tackles etc.

Providing Structural steel work using angles, channels, joists and other sections, welded and / or bolted in built up sections for trusses , structural steel floors, frame works, monorails and other structures including supplying, cutting, welding, fabricating, hoisting, fixing in position, applying a priming coat of approved steel primer etc. complete all as per specifications, drawings and as directed by the Engineer in charge.

Up to and including 300 mm Joists, 350 mm channels, and below sections using materials Confirming to IS: 2062. All test reports to be provided along with the supply of the materials. Notes: 1. Structural steel confirming to IS 2062 shall be supplied.2. Welding weights, connections, bolts and nuts shall not be measured for payment but the cost of which shall be deemed to have been included in the rates.3. Welding Electrodes manufactured by M/s. Advani Oerlicon / ESAB India & D& H of specified suitable grade only shall be used.4. Holes to be drilled only by Drilling machines and gas cutting of holes are not permitted .5. Rate inclusive of all consumables like GAS, welding electrodes and tools and tackles etc.

Providing, centering, shuttering Form work using steel plates, timber planks for all types of structures including necessary strutting, proping, staging, supports, bracings etc. and deshuttering the same after the specified time all as per drawings, specifications and as directed by the Engineer-in-charge at all levels

For Super Structure

Providing and constructing Half brick masonry using bricks of approved quality / class, make/ brand in partition walls in C.M 1:4 (using crushed sand) including scaffolding, raking out joints, curing etc. complete and with stiffners of RCC 1:2:4 (105 X 75 mm size) at every 900 mm height including form work curing etc. complete as per specifications and as directed by the Engineer-in-charge but excluding reinforcement up to 20 m height. (Reinforcement will be paid under relevant item)

Providing and constructing Brickwork in cement mortar 1:6 using crushed sand with Flyash / Flyash Lime bricks with minimum 70 kg / Sq. cm strength of approved make and size in Sub structure including, scaffolding, raking out joints, curing, cleaning complete all as per specifications and drawings.

Providing and constructing brickwork in cement mortar 1:6 using crushed sand with Flyash/ Flyash Lime bricks with minimum 70 kg/ Sq.cm strength of approved make and size in super structure above plinth up to and including Floor II level including, scaffolding, raking out joints, curing, cleaning complete all as per specifications and drawings.

Providing and constructing Random Rubble masonry using approved Rubble stone in foundation and plinth in C.M 1:6 (using crushed sand) including raking out joints or simultaneous flush pointing below ground level / plinth level, curing etc. complete as per drawings and specifications.

Supplying, cutting to shape and fixing specified diameter UPVC pipes as per IS 4985 in RR Masonry/ RCC walls for weep holes complete all as per drawings and as specified at site.

110 mm dia UPVC Pipes

Providing 15 mm thick Internal plaster in cement mortar 1:4 without cement punning (using Crushed Sand) finished smooth, including sieving of sand to required fineness, preparation of the surface, scaffolding, curing all as per specifications, drawings and as directed at site complete.

Providing 20 mm thick water proof plastering in cement mortar 1:4 (using crushed sand) finsihed smooth with a floating coat of neat cement including approved water proofing compound added @ 2% by weight of cement or as per manufacturer's specifications, sieving of sand to required fineness, preparation of surface, scaffolding at all heights, curing all as per specifications, drawings and as directed by the Engineer-in-charge.

Providing 20 mm thick External plastering in two coats under layer 12 mm thick with C.M 1:4 (using crushed sand) finished with a top layer 8 mm thick in C. M 1:3 (using crushed sand) including approved water proofing compound @ 2% by weight of cement or as per manufacturer's specifications, sieving of sand to required fineness, scaffolding up to 10 metres height, finishing, curing etc. complete as per specifications. and as directed by the Engineer-in-charge.

Providing and laying (IPS Flooring) cement concrete flooring 1:2:4, using crushed sand 50 mm thick finished smooth to the required level, finishing with a floating coat of neat cement including cement slurry, providing and fixing 30 X 3 mm glass strip, curing, cleaning the surface neatly at the time of handing over the area complete as per specifications and drawings as directed by the Engineer in charge

Providing and laying minimum 25 mm thick uniform shade Kotah stone flooring over 20 mm thick (Avearge) base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing in minimum three levels to obtain mirror polish complete with base cement mortar 1:4 (using crushed sand) all as per specifications, patterns and drawings complete.

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS 15622 of approved make. shade and colour of size ranging from 300 - 600 mm long and 300 mm - 600 mm wide and thickness not less than 6 mm as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (using crushed sand), setting the tiles in cement slurry and pointing the joints with matching colour Tile grout of approved make of matching shade including using PVC tile trim in the exposed corners, complete as per drawings, patterns and specifications complete as directed by the Engineer-in-charge.

Providing and fixing Glazed VITRIFIED floor tiles of approved make in 600 mm X 600 mm sizes thickness 8 to 10 mm conforming to IS 15622 in all colours and shades in Glossy or Matt or satin finish laid over a bed of minimum 20 mm thick bed of cement mortar 1:4 (using Crushed sand) and jointing with grey cement slurry including grouting with the joints with white cement based Tile Grout of approved make and matching shade complete as per patterns, drawings and specifications complete as directed by the Engineer-in-charge.

Providing and fixing 1st quality ceramic glazed floor tiles of minimum 300 - 600 mm long and 300 - 600 mm wide and thickness not less than 6 mm conforming to IS 15622 of approved make in all colours and shades as approved by Engineer-in-charge over a bed of 20 mm thick bed of cement mortar 1:4 (using crushed sand) and jointing with grey cement slurry including pointing with white cement based Tile grout of approved make and matching shade complete as per patterns, drawings and specifications complete as directed by the Enginner-in-charge

Providing and fixing 15-17 mm thick gang saw cut mirror polished granite (premoulded and prepolished) machine cut ZEBRA BLACK colour granite for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, colour and texture laid over 20 mm thick base cement mortar 1:4 (using crushed sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing the edge to give high gloss finish etc. complete as directed by the Engineer-in-charge at all levels

Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealent etc. (Note : Fittings glazing and panelling shall be paid for separately) NOTES : 1) The rates for aluminium is inclusive of all fastners required for fabrication and fixing in the walls. 2) All joints shall be of mittered Joints 3) A long M.S rod threaded at both ends to be provided in all aluminium door shutters in Top & bottom Horizontal members internally connecting Vertical members and fixed with M.S washers & nuts. 4) Only Aluminium members alone shall be measured and paid for.

Anodised Aluminium sections (Minimum anodizing thickness of 15 micron)

Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item)

With clear float glass panes of 4.0 mm thickness

Providing and fixing 75 mm mortice lock with 4 levers without pair of handles for Aluminium doors incloding necessary cutting and making good etc. complete.

Providing and fixing approved quality and shape star locks cum handle of approved make for sliding shutters

Providing and fixing approved quality stain less steel body roller wheels of approved make for sliding shutters

Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item)

With clear float glass panes of 6.00 mm thickness

Providing and fixing double action hydraulic floor spring of approved brand and manufacturer (conforming to relevant Indian Standard) for doors including cost of cutting floors as required, embedding in floors and cover plates with M.S pivot and single piece of M.S sheet outer box with slide plate etc. complete as per directions of Engineer-in-charge with brass cover plate

Supply & installing hermatically-sealed 6-12-6 mm double glazed openable top hung doors, windows and ventilator shutters, vision panel units of approved make comprising of an outer heat strengthened and colour reflective tinted float glass coated on surface #2 and an inner toughened clear float glass, spacers, desiccants, with moisture absorbing compound (silica gel), primary and secondary seals etc. including approved stainless steel stays, 4 point Cremone locking set including providing and fixing 70mm sided triangular sign in film on glass surface #1 etc. all complete as per approved shop drawings and specifications. 'Note : Double glazed openable shutters/doors, windows and ventilators,Vision panel units shall be measured to the overall dimensions on external face as fixed on site (Actual size). Note : Tentative / suggested make for guidance of bidder(s) : M/s. Saint Gobain - Cool lite ST-120 Metallic Blue glass / Steriling Silver / Green shade, M/s. 3M film

Providing and fixing Lay in False Ceiling 600 x 600mm unperforated corrosion resistant aluminium magnesium alloy metal panel fixed in 24 mm 'T' Frame work of Module 600 x 600 mm. Panels shall be manufactured of size 575 mm x 575 mm of approved colour in 0.70 mm thick Aluminium Alloy 3105 with square edges. Tiles to be stove enamelled on a continuous application for pre-treatment. The coils to be go through 4 stages of pre treatment Three times of oven baked through conversion coating , priming and finish coat ensuring superior adhesion, high corrosion resistance and good colour stability.The coils to be painted on both sides after degreasing. Inside surface to have a primer of 5 microns and a coat of natural colour of 5 microns, exposed surface to have a primer of 5 microns, binder of 5 microns and a topcoat of approved colour 15 microns. Grid system for fixing ceiling tiles shall comprise of tees. The 24 mm main tee runers shall be suspended at an interval of 1200 mm centre to centre. The 24 mm cross tee runner shall be suspended at an interval of 600 mm centre to centre and further supported with 24 mm cross tee with inter locking arrangements to form a Grid of 600 mm x 600 mm. The main tee shall be supported by means of 4 mm G.I.rod from slab / roof. The suspension shall be provided at 1200 to 1500 mm centre to centre.provision for lights, diffusers etc to be made including extra supports wherever necessary. Measurements shall be as per actual area of false ceiling with out deductions for lights and diffusers. Note : Tentative / suggested make for guidance of bidder(s) : M/s. Hunders Douglas make, Model - "LUXALON"

Providing and fixing 40 / 42 mm thick Aluminium Flush Door Shutter consisting of 2 mm thick colour anodized Aluminium Sheets (15 micron), 37 mm wide Aluminium frame work inside filled with glass wool 50 mm thick compressed to 37 mm including all furniture fittings, 4 Nos SS Heavy duty hinges of size 125 mm with SS Screws, Godrej make 6 lever mortise lock with handles, 1 No 250 X 12 mm long Aluminium tower bolt including vision panel with glass as per drawings complete manufactured by approved manufacturer complete as per approved fabrication drawings as directed by the Engineer-in-charge

Design, fabrication, supply and installation of frameless Façade using clear, toughened float glass of specified thickness for fixed glazing and openable panels (doors) with crystal edge polish and necessary patch fittings for swing doors,hunged on floor spring, S.S.handles and locking arrangement and clear toughened float glass fixed for fins and all joints sealed with weather silicone sealent and fixed portion glass from top sides and bottom with anodised (minimum thickness 25 microns) Aluminium 'C' channels (25 mm X 25 mm X 1.5mm thick) and all glass to glass joints sealed with clear thick weather silicone sealent and making the required grooves in plaster/concrete for fixing channels etc and making good the same with sealent / plaster of paris etc. complete all as per approved shop drawings, specifications and as directed by Engineer-in-charge. Note : Shop drawings to be prepared by the contrator as per the site conditions and the same shall be got approved by Engineer in charge before procurement. Note : Tentative / suggested make for guidance of bidder(s) : M/s. Dorma

Frameless fixed panels using 12mm thick clear toughened float glass including making cut outs, finishing the edges sealents etc complete. Nots : 1. Glass area alone shall be measured and paid. 2. Necessary patch fittings shall be paid under relevant Item.

Frameless openable panels (swing doors) using 12mm thick for door leaves including making cut outs/ holes, finishing the edges with crystal edge polish ,sealents etc complete. Nots : 1. Glass area alone shall be measured and paid. 2. Necessary patch fittings, locks & floor springs shall be paid under relevant Item.

Providing, supplying fixing PT 30/ PT 30S Over panel patch fittings with backing plate and pivots. Note : Tentative / suggested make for guidance of bidder(s) : M/s. Dorma make PT range

Providing, supplying fixing PT 40 / PT40S high light to side light / corner link patch fittings with covers to suit floor springs & free pivots. Note : Tentative / suggested make for guidance of bidder(s) : M/s. Dorma make PT range

Providing, supplying fixing PT 80 connecting link patch fittings for two or four glass. Note : Tentative / suggested make for guidance of bidder(s) : M/s. Dorma make PT range

Providing, supplying fixing Universal Centre lock with strike Plate. Note : Tentative / suggested make for guidance of bidder(s) : M/s. Dorma make

Providing, supplying fixing PT STD US 10 corner lock with strike plate. Note : Tentative / suggested make for guidance of bidder(s) : M/s. Dorma make

Providing, supplying fixing PT 91 wall to glass connecting patch fittings for fixed glass. Note : Tentative / suggested make for guidance of bidder(s) : M/s. Dorma make PT range

Providing and fixing FRP door shutters flush door / panelled type with plain colour or wooden veneer finish of approved make, design & colour. made out of 1.5 mm thick FRP skin moulded over wooden frame work of 40 mm wide and required thickness wooden styles and minimum 100 mm wide lock rails and wooden blocks for door stoppers, tower bolts, baby latch, aldrop, handles etc. wherever required and core filled with Polyurethane Foam and fixing with 4 Nos 100 mm (ISI marked) stainless steel hinges with S.S. wood screws .

35 mm thick panelled door type of approved colours including the cost of 100 mm ISI marked heavy quality stainless steel butt hinges with necessary screws.

Supplying and fixing Rolling shutters of approved make as per ISI standards made out of required size of MS lathes 18 gauge interlocked together throughout entire length and jointed together at the end by end locks mounted on specially designed pipes shaft with brackets, side guides and arrangements for inside & outside locking with push and pull operation complete including the cost of providing and fixing necessary springs of required size and M. S top cover of required thickness for rolling shutters.

Rolling shutters PULL and PUSH type including top hood 0.90 mm thick

Rolling shutters gear operated type with handles including top hood 0.90 mm thick

Extra over the cost of rolling shutters for providing and fixing motorized arrangements( with remote & manual operation) including designing, control panels, limit switches,required wiring and cables from panel to motor and required size of shaft etc of approved make all as per standard specifications including commisioning and testing complete as directed by the Engineer-in-charge.(only power supply point will be provided)

For rolling shutters up to 15.00 sq.m opening area.

Extra for providing grilled rolling shutter manufactured out of 8 mm dia MS Bar instead of lathes as per specifications, design approved by the Engineer-in-charge complete

Providing, supplying and fixing hollow metal flush steel doors 40 mm thick of approved make consisting of door frame and shutters and all hardware fittings, frame made out of 14g thick G.I sheets and shutters made of 16g thick sheets, hollow portion filled with puff, including necessary stiffners in shutters and frame, vision panel of specified size with 4 mm glass and clip on pressed steel frame for vision panels, fixing 4 nos of heavy duty stainless steel 304 grade ball bearing hinges, mortise / dead lock of approved make, a pair of 200 mm long stainless steel handles, 250 mm long stainless steel tower bolt, etc. frame hollow portion filled with PCC 1:2:4, necessary hold fast embedded in concrete, fixing in concrete with anchor fastners, finished with Polyurethane painting of approved colour complete all as per drawings and specifications and as directed by the Engineer-in-charge.

Providing and fixing IS:12817 marked stainless steel butt hinges of size 125 x 64 x 2.5 mm (heavy weight) of approved make with suitable stainless steel screws etc. complete as directed by the Engineer-in-charge

Providing and fixing anodised aluminium tower bolts of size 250 X 12 mm ISI marked of approved make, transparent or dyed to requried colour or shade with necessary screws etc.

Providing and fixing mortice latch and lock with 6 levers and a pair of lever handles Inside opening LEFT / Right with necessary screws etc complete in wooden / steel/ FRP/ doors as per specifications. Note : Tentative / suggested make for guidance of bidder(s) : M/s. "Godrej" make (Product Code 9167/ 9168)

Providing and fixing IS: 3564 marked Al die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc. in wooden doors / steel doors with necessary bolts & nuts etc. complete as per specifications and as directed by the project Engineer. Note : Tentative / suggested make for guidance of bidder(s) : M/s. " Everite/ Hardwyn"

Providing Chemical based water proofing of modified acrylic emulsion Polymer and Elasomeric waterproofing coating over terrace slab/ parapet/ side walls etc. at all elevations including polycon based fibrous net complete including cleaning and preparation of surface and testing by ponding water complete with following operations: '1. Removing of all loose materials by wiremesh and clean entire terrrace with clean water by using water jet wherever required. 2.Open all visible crack by plaster cutting machine in "V" shape, 3. Dilute Indifil binder with water in the Ratio of 1:4 and pour on the bare slab to be treated, 4. Apply Indfofil binder and cement in the ratio of 1:1 and water to obtain paste like consistancy and fill the cracks. 5.Apply Indofil bond coat of INDOFIL binder and cement in the ratio of 1:1 to entire terrace. 6. First coat of INDOFIL binder & cement at the rate of 1.48sq.m per litre of Indofil. 7.Lay polycon based firous net (polester geotextile of minimum 80 GSM) for entire area immediately before drying of first coat to get proper bonding. 8. Apply one miore coat of INDOFIL binder & cement above fibre net. 9. Apply 2 coats of INDOFIL- FlexCote-WP @ 2.40 Sq.M per litre with dilution 10% weight of potable water. 10.Test the surface for water tightness. Note : Tentative / suggested make for guidance of bidder(s) : M/s. Indofil - MC76

Providing and applying one coat of cement primer of approved brand on wall surface to receive specified paint including scaffolding complete all as per specifications and as directed by Engineer-in-charge

Providing, applying wall painting two coats with Lustur paint of approved brand to give an even shade without cement primer including preparation of the surfaces, scaffolding complete as per specifications and as directed by the Engineer-in-charge.

Providing and applying white cement based wall putty of approved make over concrete or Plastered surface up to 3 mm thick to get uniform surface free from undulation including cleaning complete all as directed by the Engineer-in-charge

Providing and Painting two coats of synthetic enamel paint on Steel Surfaces of approved brand and manufacture to give an even shade without primer coat.including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge.

Providing and painting Two coats of synthetic enamel paint on new wooden surfaces of approved brand and manufacturer of required colour to give an even shade over an under coat of suitable shade primer of approved brand and manufacturer including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge

Removing white or colour wash, distemper, external paint by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete all as directed at site including scaffolding, cleaning of the areas.

Providing and painting old walls TWO coats on existing cement paint surface applied with fine textured exterior paint of approved make, required shade, including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge. (In plain plastered / sand face plastered / concrete surfaces)

Providing and painting old walls (Two coats) over existing cement paint surface on plain / sand face plaster & concrete surfaces with premium acrylic smooth exterior paint of approved make, required shade, including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge.

Providing and fixing double tubular scaffolding system using H-frames with cup lock type on the exterior side upto seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S clamps and M.S staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and as approved by the Engineer -in - charge. The elevational area of the scaffolding shall be measured for payment purposes. The payment shall be made once irrespective of duration of scaffolding.

Providing and treating the OLD surface using ANTI-FUNGAL treatment in the following operations: (i) entire old paint to be scrapped out, (ii) The neeru / cement punning to be removed by chipping completely, (iii) one coat of Antifungal chemical having high degree of Santroprite (Sodium Chloro Penta Chlorophenate with diluant & additives) to be applied, (iv) entire surface to be finished with White cement based Wall putty of approved make to get uniform undulation free surface; complete as directed by the Engineer-in-charge.

Dismantling brick work in Cement mortar carefully without damaging adjacent structures including stacking of materials and dispoal of unserviceable materials within 100 m lead as per direction of Engineer-in-charge

Dismantling doors, windows and clear storey openings (steel / wood) shutter including chowkhats, architraves, holdfasts etc. complete and stacking within 100 m lead (full windows) Of area 3.00 Sq.M and below

Credit to the Department for removing scrapped items outside BARC as directed by the Engineer-in-charge. doors, windows of area 3.00 Sq.M and below

Dismantling doors, windlows and clear storey windows (steel / wood) shutter including chowkhats, architraves, holdfasts etc. complete and stacking within 100 m lead (full windows) Of area beyond 3.00 Sq.M

Credit to the Department for removing scrapped items outside BARC as directed by the Engineer-in-charge. doors, windows of area 3.00 Sq.M and above

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismantling and stacking within 100 m lead

Credit to the Department for removing scrapped items outside BARC as directed by the Engineer-in-charge. steel work in built up sections in angles, tees, flats and channels including all gusset plates.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 100 m lead. For thickness of tiles above 10 mm and up to 25 mm

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 100 m lead. For thickness of tiles above 25 mm and up to 40 mm

Dismantling barbed wire / flexible wire rope in fencing including making rolls and stacking within 100 m lead

Credit to the Department for removing scrapped items outside BARC as directed by the Engineer-in-charge. barbed wire / flexible wire rope in fencing

Dismantling cement asbestos, Celotax or other hard board ceiling or partiton walls including stacking of serviceable materials and disposal of unserviceable materilas within 100 m lead

Dismantling Aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplaus material and stacking of serviceable materials within 100 m lead as directed by the Engineer-in-charge

Credit to the Department for removing scrapped items outside BARC as directed by the Engineer-in-charge. Aluminum / Gypsum partitions

Dismantling old plaster / skirting carefully, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 100 m lead

Lead charges for 1st 1 KM or part thereof, by mechanical transport including loading unloading, stacking / levelling etc. Note: The rates in respect of this Item are applicable for NET Quantities arrived at after making deduction for voids @ 30% in respect of debris from corresponding STACK / TRUCK Measurement

Debris up to 1 km

Providing and fixing concertina barbed tape coil of following dia. made from M.S. galvanized ribbon tape of 0.5 mm thickness, 19 mm width stretching the coil to 9 m approximate, fixing the coil with clips between "Y" armed and MS angle posts 2.44 m high from ground level, including supplying and fixing MS galvanized clips etc. complete as per manufacturer's specification and including painting by dipping method the concrtina tape coil with two coats of synthetic enamel paint of approved shade and make over a coat of approved primer at fabrication shop, before bringing the material to the site and fixing in position etc. complete as directed by the Engineer-in-charge.

600/ 610 mm Dia Concertina coils

Fencing with MS post placed at required distance, embedded in cement concrete blocks every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side only, provided with horizontal lines and two diagonals of barbed wire 9.38 kg per 100 metres (min) between the two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire tied to 6 mm bar nibs fixed while casting the post etc. complete as directed by the Engineer-in-charge. Note: 1. Cost of RCC posts, struts, earth work and concrete to be paid for separetely. 2. Payment to be made per metre cost of total length of barbed wire used.

With G.I. barbed wire 12 swg

Providing and fixing GI chain link fabric fencing Made of GI wire of dia 4 mm of required width in mesh size 50 x 50 mm including strengthening with 2mm dia wire or nuts, bolts and washers as requeid complete as per direction of Engineer-in-charge.

Providing and repairing to internal plaster in cement mortar 1:4 (using crushed sand) of thickness 12 mm to 20 mm in patches of area up to 2.5 sq metres including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls, including disposal of rubbish to the dumping ground within 50 metres lead

Providing and repairing to external plastering in cement mortar 1:4 (using crushed sand) of thickness 12 mm to 20 mm in patches of area up to 2.5 sq metres including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls ncluding admixtured with approved Water proofing compound @ 2% by weight of cement used and as per manufacturer's specifications, sieving of sand to required fineness complete including disposal of rubbish to the dumping ground within 50 metres lead.

Removing the following sizes of damaged G.I fittings from G.I pipe lines, replacing the damaged fittings with new fittings, testing for leakage etc. complete as per specifications and as directed by the Engineer-in-charge.

15 mm G.I elbow, bend, nipple, socket, tee etc.

20 mm G.I elbow, bend, nipple, socket tee, socket etc.

25 mm G.I elbow, bend, nipple, socket tee, socket etc.

Providing, laying, jointing, fixing and testing heavy quality (ISI Marked C-Class) Galvanised Iron pipes and ISI marked fittings like, tees, elbows, bends, unions, nipples,reducers etc. as required for the work, including testing the pipes and fittings for 10.00 Kg / Sq.Cm hydralic pressure with a minimum period of two hours duration with clean water, including cutting , threading, jointing with hemp yarn, white lead, jointing teflon tape, chasing walls and making good by filling with concrete 1:3:6, complete all as per specifications and drawings, including two coats of anti corrosive bitumastic paint, all as directed by the Engineer-in-charge. Pipes with ISI marked 'C' -Class heavy quality pipes of approved make.

15 mm dia G.I pipe

20 mm dia G.I pipe

25 mm dia G.I pipe

32 mm dia G.I pipe

Providing and fixing C.P Brass open stop cock of Heavy Quality of specified / approved make as per specifications and as directed by the Engineer-in-charge.

15 mm n.b CP Brass open stop cock of approved make and type

Providing and Fixing CP brass 100 mm dia shower rose with Shower arm of Specified make as per specifications and as directed by Engineer-in-charge complete.

Providing and fixing 15 mm C.P brass pillar cock of heavy quality of approved make and specied type as per specifications and as directed by the Engineer-in-charge.

Providing, laying to the slope specified and jointing glazed stoneware pipes grade 'A' with stiff mixture of cement mortar in the order of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete excluding excavation and refilling which will be paid under relevent Item.

150 mm diameter stoneware pipe

Providing and laying non pressure NP2 class RCC Hume pipes of approved make, with collars jointed with stiff mixture of cement mortar in the proportion of 1:2, laying to the levels, slopes and as per the drawings and specifications and as directed by the Engineer-in-charge including testing of joints etc. complete.

450 mm Dia RCC Hume pipe class Np2

Constructing brick masonry circular type manhole 1220 mm internal dia at bottom and 560mm Internal dia. at top in cement mortar 1:4, inside, outside and all exposed surfaces cement plaster 12 mm thick with cement mortar 1:3 finished with a floating coat of neat cement, foundation concrete 1:3:6 mix and making necessary channel in cement concrete 1:2:4 finished with a floating coat of neat cement all complete as per standard design including fixing C.I. manhole cover of specified weight in concrete 1:2:4, cast Iron steps, complete as per drawings. (Note : C.I manhole cover, cast iron steps and earthwork excavation will be paid for separately under relevant Item) For an Initial depth of 1.68 M

Extra depth for circular type manhole 1.22 m internal dia (at bottom) beyond 1.68 m

Supplying and fixing Cast Iron Man hole or Cast Iron Steps cover of approved make and weight as specified in the drawings or as directed by the Engineer in charge.

Providing and fixing Indian water closet (Orissa pan) of apperoved make with 100 mm China ware P or S trap, One no. 10 litre High level or low level white PVC flushing cistern with flush pipe & bend with manually controlled device (handle lever) conforming to IS:7231, PVC 15 mm Inlet connection with all fittings and fixtures complete including all connection, embedding in position commissioning, cleaning etc. all as per drawings and specifications and as directed by the Engineer-in-charge.

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm .

Providing and fixing white vitreous china European type Water Closet with 'P' or 'S' Trap with solid seat and lid of approved make, 10 litre low level white PVC flushing cistern with manually controlled device (handle lever) conforming to IS:7231, flush bend, fixing EWC with C.P brass screws, 15 mm PVC heavy quality inlet connection of 450 mm long, including testing , commissioning & cleaning etc. complete all as per drawings and specifications and as directed by the Engineer-in-charge.

E.W.C. pan in White colour with ISI marked white solid plastic seat and lid.

Providing and fixing white vitreous china flat back half stall urinal size 580 x 380 x350 mm / 610 mm Aquaseal model of approved make with approved make 32mm C.P flush value with standard flush pipe and C.P. brass spreaders, 32mm urinal waste coupling with dome grating and clamp etc. including making G.I water line connection complete as directed by the Engineer-in-charge. Notes : 1. Only G.I. pipes will be paid under relevant Item. 2. For fixing flush valve 32 mm G.I water line provision to be made which will be paid under relevant Item .

Single half stall urinal with C.P brass Flush valve.

Providing and fixing viterious China wash basin of approved make and colour with C.I. brackets, 15 m C.P. brass pillar tap of approved make,15 mm x 600mm long PVC Inlet connection, 32 mm heavy quality C.P. brass waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls and testing complete all as per specifications and as directed by the Engineer-in-charge.

White vitreous China wash basin size 630 x4 450 mm and equivalent sizes with single 15 mm C.P. brass pillar tap.

White vitreous China counter top / counter below wash basin size 560 x 410 mm / 560 x 450 mm with single 15 mm C.P. brass pillar tap (OVAL / ROUND Models)

Providing and fixing PVC low level / high level flushing cistern 10 litre capacity of approved make in white colour with flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures etc. complete as per specifications and as directed by the Engineer-in-charge.

Providing and fixing Heavy quality flexible PVC waste pipe of following dia. (semi rigid or flexible) of approved make for sink or wash basin including PVC waste fittings etc. complete all as per specifications and as directed by the Engineer-in-charge.

32 mm dia flexible PVC (semi-rigid) waste pipe.

40 mm dia flexible PVC (semi-rigid) waste pipe.

Providing and fixing 6 mm thick mirrors of size 600 x 450 mm of approved make with bevelled edges complete with 6 mm thick asbestos sheet back ground fixed to walls with C.P. brass screws and concealed washers complete. all as per specifications and as directed by the Engineer-in-charge .

Extra over for providing and fixing mirrors with approved make stainless steel 304 grade STUDS (with wall spacers) complete all as per specifications and as directed by the Enginner-in-charge

Providing and fixing heavy quality CP brass bottle trap 31 / 32 mm of approved make single piece moulded with height of 270mm, effective length of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal of approved make for wash basins / urinal etc. all as per specifications and directed by the Engineer in charge.

Providing and fixing 15 mm PVC inlet connection suitable for hot and cold water 600 mm long with nuts and washers complete for wash basins/ Urinals etc. with all necessary acessories complete as directed by the Engineer-in-charge.

Providing & filling overburnt brick bat aggregates of 90-45 mm size to fill in soak pits including Excavation, breaking the brick to required size of 90-45 mm aggregate including cost of material, labour, tools etc. complete and as directed by the Engineer-in-Charge. 'Mode of measurement : Soak pit inside measurement upto the height of filling will be paid in CuM and no voids will be deducted from the measurements.

Supplying unskilled / Skilled man power along with necessary tools, machines etc. when decided by Engineer-in-charge to work for eight hours (excluding lunch) per day to carry out the repairs of furniture departmental work allotted by Engineer-in-charge.

Un-Skilled Labour

Skilled Labour

Supplying & installation of Green PVC Artificial Grass Carpet soft Matt, 20mm to 30 mm thickness and width of 100 cms etc. complete all as per direction of Engineer-in-charge.

Carrying out Civil Engineering works like surveying & leveling, checking of formwork fabrication, reinforcement fabrication as per drawings, witnessing sample retrieval & testing for various construction materials, ensuring concrete ingredient ratio at batching plant and pouring of appropriate grade of concrete in plain and reinforced concrete works, ensuring proper mixing of approved ingredients & waterproofing admixtures for mortars and brickwork, plaster, flooring & waterproofing works, and other civil & PH works including supervision of construction safety as per BARC specifications & relevant documentation, compiling, binding and preparation of tender documents & Agreements overall as directed by Engineer-in-Charge. Note : (1)Each Job shall be carried out by one qualified Technician having minimum SSC or Trade certificate in Masonary/Plumber/Carpenter/Painter Trade of less than one year duration from ITI/Government Recognised Vocational Training Institute. (2) Deployment: The contractor shall deploy one Technician for each job as single day work , for 6 working days per week for minimum 8 ½ hours per day with 30 minutes of break, in General (Ist / IInd) or on Round the clock shift including Saturdays, Sundays & holidays whenever necessary as per the discretion of the Engineer-in-Charge during the contract period. In case of emergency works like continuous pouring of concrete or shutdown/maintainance work, the person will have to stay longer occasionally as per the instruction of the Engineer in-charge. No additional payment will be made on this account. (3)The contractor shall carry out number of jobs per day as per requirement at site. (4) Mode of measurement : Measurement will be per job basis. A single job shall be carried out by deploying one Technician exclusively for the particular job. (5) Technician should be engaged after scrutiny of BARC Engineers/Engineer-in-charge and approved by Competent authority and the deployed technician will report to Engineer/ Engineer-in-charge.

Cleaning of manholes / Inspection chambers of Canteen and toilets, sewage line carefully by mechanical means/ or with tools complete all as directed by Engineer-in-charge. Pipe in between chambers will not be measured. The rates are inclusive of removing muck, solids and disposing the same beyond 2 km distance. Pumping arrangement for water is to be made by contractor at his own cost. The rates are inclusive of pumping.

Providing and fixing 75 mm thick Non Asbestos Fiber Reinforced Aerated Cement / Expanded Polystyrene (EPS) Concrete Sandwich wall panels of bulk density of 690 - 876 kg/cum of approved manufacturers, made out of Light Weight Fiber Reinforced Aerated Cement Concrete Core Composed of Portland Cement, Fly Ash Binders etc. / Expanded Polystyrene (EPS) Concrete core and 4 to 5 mm thick Non Asbestos Fiber Cement Boards on either Side of the Core having a Tongue and Groove joint on Longitudinal side of the Modules. These panel Modules are to be erected / Installed using Galvanised Iron Steel Tracks of suitable section as per manufacturers specification at bottom and Top of the Wall respectively, including all necessary material required for erecting and fixing the Wall Panel complete as per the directions of the Engineer in Charge. For permanent and exterior joints the paste of Sodium Silicate and Fly Ash / Cement to be applied at Tongue and Groove Interlocking Joints and on exposed joints with Acrylic Putty and Fiber Tape on both sides all as per design, drawing and specification and as directed by Engineer-in-Charge. Notes: 1. Structural steel used for support if any required shall be paid in relevant item. 2. Necessary cut-outs for Doors & Windows shall be made in the wall paneling. The rate shall be inclusive of all materials & Labour required for making cut-outs and additional GI channel frame work. No deductions will be made for the cut-outs for measurement purpose.

Carrying out Civil Engineering works like surveying & leveling, checking of formwork fabrication, reinforcement fabrication as per drawings, witnessing sample retrieval & testing for various construction materials, ensuring concrete ingredient ratio at batching plant and pouring of appropriate grade of concrete in plain and reinforced concrete works, ensuring proper mixing of approved ingredients & waterproofing admixtures for mortars and brickwork, plaster, flooring & waterproofing works, and other civil & PH works including supervision of construction safety as per BARC specifications & relevant documentation, compiling, binding and preparation of tender documents & Agreements overall as directed by Engineer-in-Charge. Note : (1)Each Job shall be carried out by one qualified Degree holder Engineer with 1 (one ) year experience/Diploma holder Engineer with 3 year experience /Licentiate in Civil/Construction Engineering / Technology conducted by Board of Technical Examinations / University/ Autonomous Govt / Govt recognized recognized Polytechnic/ Institute. (2)Deployment: The contractor shall deploy one Engineer for each job for minimum 26 working days per month for minimum 8 ½ hours per day with 30 minutes of break, in General (Ist / IInd) or on Round the clock shift including Saturdays, Sundays & holidays whenever necessary as per the discretion of the Engineer-in-Charge during the contract period. In case of emergency works like continuous pouring of concrete or shutdown/maintainance work, the person will have to stay longer occasionally as per the instruction of the Engineer in-charge. No additional payment will be made on this account. (3)The contractor shall carry out number of jobs per month as per requirement at site. (4) Mode of measurement : Measurement will be per job basis. A single job shall be carried out by deploying one engineer exclusively for the particular job. (5) Engineer should be engaged after scrutiny of BARC Engineers/Engineer-in-charge and approved by Competent authority and the deployed engineer will report to BARC Engineer / Engineer-in-charge.

shoiab construction