Repair to leakage seepage roofing sheets false ceiling water proofing of roof repair to chajja and facia wall panelling and other associated works at parade ground Bharatpur and periodical services to certain bldg and comprehensive repair for day to

Amount

Taking down cement plaster of any description on bricks walls etc, including racking out joints, hacking for keys, scrubbing down with water etc complete all as specified.

M&L for 15mm thick rendering in CM (1:6) on fair faces of brick/concrete finished even and fair without using extra cement including necessary steel scaffolding for working platform etc complete all as specified.

M&L for 15mm thick rendering in CM (1:4) on fair faces of brick/concrete finished even and fair without using extra cement including necessary and steel scaffolding for working platform etc complete all as specified.

M&L for 5mm thick rendering in CM (1:3) on fair faces of brick/concrete finished on ceiling without using extra cement including necessary and steel scaffolding for working platformm for four story building etc complete all as specified.

Demoltion of brick work built in cement mortor including all quoins, arches, pillars etc complete all as specified.

M&L brick work with subs class "B" bricks straight or curved on plan exc 6 mtr mean radius built in cement mortor (1:6) complete all as specified.

Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper, over a coat of primer over 3mm thick wall care putty on walls complete all as specified

Preparation of newly plastered surfaces of walls and applying three coats of white wash on ceiling complete all as specified

M&L two coats of cement base paint on newly plastered surfaces of walls over a coat of primer including preparation of surfaces complete all as specified.

Demolition of cement concrete unreinforced in floor incl tiles in ground floor and paving n.exc 15 CM thickness (below or above GL) complete all as specified.

M&L providing cement concrete type B-O (1:2:4), using 12.50mm graded stone aggregate as in roof kerbs, benching, rounded or chamfered on edges complete all as specified.

PCC (1:4:8) type D-2 using 40mm graded crushed stone aggregate in foundation/bed complete all as specified.

M&L for screed bed or bedding layer 15 mm thick in cement mortar 1:4 mixed with water proofing compound as per manufactoring instruction, finished even and smooth without using extra cement over cement slurry over existing roof @3 % . Note:- WPC Shall be measured and paid seperatly

M&L Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the rati of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete all as specified.

M&L for 10mm thick rendering in CM (1:3) as in old RCC roof surfaces and sunken or concrete surfaces mixed with water proofing compound finished fair and even complete all as specified.

Supply only water proofing compound ISI marked complete all as specified.

S&F APP based polymeric membrane not less than 3mm thick, weighing not less than 3.5 Kg/sqm , reinforced with polyster non-woven fabric (weighing not less than 150 gm/sqm and upper side of membrane thermally insulated with white mineral gravel finish, informaly embadded during manufacturing process shall only be used. It shall be laid by torch application,side overlaps shall be 75mm and the ends shall be 100mm and all over laps shall be sealed by torch application including applying a coat of cold applied bitumen primer conforming to IS:[email protected]/sqm & applied a Hot blown coat of bitumen layer spread over primer @ 2.0 Kg/Sqm complete all as specified.

M&L PCC (1:3:6) type C-2, using 40mm graded stone aggregate, 75mm thick finished even & smooth without using extra cement complete all as specified.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in flooring 40mm thick finished even and smooth with using extra cement complete all as specified.

M&L for coloured tiles in vertical surfaces of size 300mm x 200mm , 7 mm thick over and including 15 mm thick rendering in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.

M&L for coloured/ matte finish Non Skid Ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm , over and including 10 mm thick screed bed in CM 1:4 in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.

M&L for Coloured / matte finish Non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm bur not exceeding 0.38 sqm, over and including 10 mm thick screed bed in CM 1:4 in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified.

M&L for Vitrified ceramic tiles and including 10 mm thick (Square/rectangular) area of each tile not exceeding 0.36 sqm , over 10 mm thick screed bed in CM 1:4 in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing ), removing serviceable tiling to store and rubbish off the premises complete all as specified.

Dismantling of stone slab and tiles of any description or thickness in floors, etc laid beded and pointed in any mortar complete all as specified.

M & L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in over and including 15mm thick screed bed in cm 1:4 and pointing in white cement (1:2) us?ing marble dust with admix?ture of pigment to match with shade of granite

M&L for Machine cut kota stone slab flooring 20-25 mm thick over cement screed 20 mm thick in cement mortar 1:6, laid and jointed with gray cement slurry mixed with greypigment to match the shade of the slab including rubbing and polishing complete all as specified.

M&L for Machine cut kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over cement screed 15 mm thick in cement mortar 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

Cutting, polishing to existing Kota/ marble flooring,mirror polishing including levelling certain places to Kota/ marble floor ,necessary repair work complete all as specified.

Demolition and breaking up drain pipes (SGSW, AC or reinforced cement) set in cement mortor internal dia of pipe 100mm complete all as specified.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified.

Dismantling of cast iron drain pipes & fittings, jointed in cement mortar and taking out of trench required internal dia of pipe 75 to 100mm.

S&F 100mm bore cast iron soil waste and vent pipe (spun pipe) in any length with or without ears with cement joints fixed to walls/ceiling or laid in floor.

All as item No 33 abovebut 75mm dia.

M&L cast iron Nahani trap 75mm out let dia with grating incluiding jointing to waste pipe fixed in cement concrete type B-1 (1:2:4).

S&F in repair brass CP shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified.

S&F in repair vitreous china wash hand basin, white, of size 550x400mm flat back excluding taps, waste, chain and plug but including brackets, cutting for and pinning in ends of brackets or erecting complete all as specified.

Dismantling existing water tank of capacity exc 250 ltrs & n. exc. 500 ltrs and S &F of Rotational moulded polyethylene water storage tanks 500 Ltr (cylinderical vertical with closed top)with 20mm dia ball brass valves,high pressure , with polythene float and flynut complete, hoisted and fixed in position complete all as specified.

Dismantling existing water tank of capacity exc 500 ltrs & n. exc. 1000 ltrs and S &F of Rotational moulded polyethylene water storage tanks 1000 Ltr (cylinderical vertical with closed top)with 20mm dia ball brass valves,high pressure , with polythene float and flynut complete, hoisted and fixed in position complete all as specified.

S & F in repair of vitreous china squatting pan, 'Orissa' pattern, size 580x440 mm white, with integral foot rests, 'P' or 'S' trap, including connection to trap, and to flushing pipe, anti-syphonage pipe etc. complete including making good to floor matching with existing complete all as specified.

S&F in repair of pillar tap, cast copper alloy with capstan heads,chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore complete all as specified.

S&F in repair bib taps cast copper alloys with crutch or butterfly handles, screwed down, screwed for iron pipe or for brass ferrule & fixed for 15mm bore GI pipe complete all as specified.

S&F in repair chromium plated15mm bore stop valve/Angle valve cast copper alloys, screwed down high pressure with crutch or butterfuly handle , screwed both ends for iron pipe or for unions and fixed complete all as specified.

S&F in repair of PVC low level flushing cistern 10 ltrs capacity with inlet ball valve float & handle, syphonic action type including brackets & flush pipe of polythelene 32mm dia complete all as specified.

M&L 15mm bore GI tubing medium grade ISI marked with all fittings and fixed complete to walls, ceiling or laid in floor including taking down existing pipe .

All as per item 45 above but 20mm bore tubing.

S & F powder coted Anodised Aluminium frame for door,windows,vantilators with one or more rebates including joining cleats for fixing etc complete all as specified.

S & F powder coated Aluminium door shutter,aluminium section weighing 0.55kg/m including necessary joining cleats glazing clips,rubber neoprene packing handles 2 Nos in each door,hinges anodized aluminium snap beading screw etc complete all as specified.

S&F powder coated Anodised aluminium window and ventilators shutters,side hung type without sash bars,aluminium section weighting 0.55 kg/m including necessary joining cleats,glazing clips,rubber packng,anodised aluminium snap beading,screws,anodised aluminium fitting such as peg stays 150mm long 1 nos ,hinges type B-21 100 mm long Nos suitable handle Nos complete all as specified.

S&F in Replacement double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover,governing pivot made of brass,other parts made of mild steel heavy duty and fixed complete all as specified.

S&F in repair Aluminium extruded section body door closer hydraulically regulated designation no 3 universal type suitable for door shutter up to 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified.

S&F PVC wall panelling in repair with panel of 300 mm x 4 mm Hollow section of Sintex pattern SPUF- 146 or equivalent , fixed with PVC plug and screw and inserted to next panel groove, edges and corners of all door/ window/openings etc to be covered with PVC angle fixed with solvent cement complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified.

Dismantling of steel rolling shutter of any description and any size complete all as specified.

M&L for greasing and easing of rolling shutter of size not exc 18 sqm alongith the guide channel,helical spring,anchoring and all other as to work the shutter in easy way and complete all as specified and directed.

Steel rolling shutters,thickness of lath 1.00mm without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer;erected in position as indicated,but gear operated type with bevel gear box and crank handle complete all as specified.

S&F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified.

S&F Ball bearing for rolling shutters complete all as specified.

Taking down shutter of any description area exc 1 sqm and n. exc 2 sqm complete all as specified.

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, complete all as specified. Note:- Rate of Door Handle ,Lock & floor spring etc deemed to be in quoted rate )

S & F colour powder coated mild steel continuous (piano) hinge, width of flaps(when open) is 30mm complete all as specified.

S &F 18mm thick solid PVC ply of first quality of one side prelaminated of approved colour and one side white colour fixed with screw 'solvent cement/adhesive to make cupboard shutter complete all as specified.

S & F stainless steel handle of 110mm size of best quality complete all as specified.

S & F magnet catch for kitchen cabinet shutter as per approved sample complete all as specified.

S & F colour powder coated mild steel continuous (piano) hinge, width of flaps(when open) is 30mm complete all as specified.

M & L Preparation of old decorated plastered or undecorated plastered surface of wall including cornices, pilasters etc by brooming down, steel wire brushing ,scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on walls complete all as specified.

Ditto all as per Srl item No 66 as above but applying one coat of white wash on ceiling complete all as specified.

M&L for complete removal of existing treatment from surface of walls preparation of old plastered surfaces including removing/brooming down or scraping down loose dirt by steel brushes etc,applying wall care putty where required for filling purpose of any description/cavity etc and applying two coat of oil bound distemper of any colour on wall complete all as specified.

M&L for complete removal of existing treatment from surface of walls and preparation of old plastered surfaces and applying two coats of exterior emulsion paint (weather proof complete all as specified.

M&L for complete removal of existing treatment from surface of walls and applying two coats of cement base paint over a coat of Priming plastered and other surfaces with alkali resistant priming paint primer with hand roller complete all as specified.

M&L for Preparation of old decorative concrete, plastered/ un-plastered surface of wall including cornices, pilasters etc by brooming down, steel wire brushing ,scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots removing nails and filling small holes by putty and rubbing surface by sand paper to prepare the surface and applying one coat of cement based paint using hand roller of approved colour complete all as specified.

M & L Preparation of old distempered surface of wall including cornices etc by brooming down, steel wire brushing ,scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots removing nails and filling small holes by putty and rubbing surface by sand paper to prepare the surface and applying one coat of distemper oil emulsion using hand roller white or tinted complete all as specified.

M&L for one coats painting with synthetic enamel paint to old wood or wood based surfaces of any description, not otherwise described over 10 CM width or girth including preparation of surface including all preparatory work complete all as specified.

M&L for one coats painting with synthetic enamel paint to old steel or steel based surfaces of any description, not otherwise described over 10 CM width or girth including preparation of surface including all preparatory work complete all as specified.

VASUNDHARA AND COMPANY

M/S MAMTA CONSTRUCTIONS

M/s Ranaji Construction Co

PD GUPTA AND COMPANY

M/s Gupta Traders

B R ENTERPRISES

M/S CHAUDHARY CONSTRUCTION

krishna Associate