REPAIR/ REPLACEMENT OF LT CABLE AND EXTERNAL ELECTRIC SUPPLY WITH OTHER CONNECTED ITEMS AT KALINA AND JUHU AREA UNDER GE (N) MUMBAI

Amount

Excavation in trenches, not exceeding 1.50 m wide and not exceeding 1.5 m in depth, for foundation, laying of cables/pipes etc and getting out in hard/dense soil complete all as specified and as directed by Engineer-in-Charge.

Returning, filling in including spreading, levelling, watering and well ramming in layers, not exceeding 25cm in soil complete all as specified and as directed by Engineer-in-Charge.

Removing excavated material to a distance, not exceeding 50 m and depositing where directed, at a level not exceeding 1.5 mtr above the starting point complete all as specified and as directed by Engineer-in-Charge

Supply and lay double wall corrugated (DWC) HDPE pipe 63mm outer dia , as per IS-16205 including couplers and bend for cable protection laid in trenches etc complete all as specified and as directed by Engineer-in-Charge Make : TELEREX 450N/ Rex Polyextrusion Ltd/ Finolex/ Prince Pipes and fittings ltd/Kisan/Supreme/JAIN IRRIGATION SYS/ Astral

Supply and lay double wall corrugated (DWC) HDPE pipe 40mm outer dia , as per IS-16205 including couplers and bend for cable protection laid in trenches etc complete all as specified and as directed by Engineer-in-Charge Make : TELEREX 450N/ Rex Polyextrusion Ltd/ Finolex/ Prince Pipes and fittings ltd/Kisan/Supreme/JAIN IRRIGATION SYS/ Astral

Supply and lay double wall corrugated (DWC) HDPE pipe 90mm outer dia , as per IS-16205 including couplers and bend for cable protection laid in trenches etc complete all as specified and as directed by Engineer-in-Charge Make : TELEREX 450N/ Rex Polyextrusion Ltd/ Finolex/ Prince Pipes and fittings ltd/Kisan/Supreme/JAIN IRRIGATION SYS/ Astral

Supplying, laying,connecting, testing & commissioning LT UG XLPE insulated, heavy duty, 1100 V grade electric cable with aluminium conductor, served with an inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall PVC sheathed of size 10 Sqmm x 2 core, laid in trenches or passing through pipe or fixed to wall, making all connections with and including provision of necessary glands, lugs, bushing etc as required including taking down old unserviceable cable complete all as specified and as directed by Engineer-in-Charge of following sizes:- Note : Earthwork excavation, DWC/GI pipe for cable protection shall be measured and paid separately in their respective items Make: Cable Corporation of India (CCI)/ Asian Cable Co, Chattisgarh/ Finolex/ Polycab/ Gloster/Universal/ RPG Cables Ltd , Thane/ Havells India Ltd/ RR Kabel/ KEI Industries Ltd(KEI)

-do- same as Item no. 7 above but of size 10 Sqmm 4 Core

-do- same as Item no. 7 above but of size 16 Sqmm 4 Core

-do- same as Item no. 7 above but of size 50 Sqmm 3.5 Core

-do- same as Item no. 7 above but of size 120 Sqmm 3.5 Core

-do- same as Item no. 7 above but of size 150 Sqmm 3.5 Core

-do- same as Item no. 7 above but of size 185 Sqmm 3.5 Core

Supply and fix in repairs galvanised iron pipe, medium grade, 50mm bore for cable protection on wall, trenches, road crossings etc. with suitable size of GI saddle, wherever necessary complete all as specified and as directed by Engineer-in-Charge. Make: TATA/SWASTIK/JINDAL/Bharat Steel tube/ZENITH/Indian Tube Company

Supply and fix in repairs galvanised iron pipe, medium grade, 80mm bore for cable protection on wall, trenches, road crossings etc. with suitable size of GI saddle, wherever necessary complete all as specified and as directed by Engineer-in-Charge. Make: TATA/SWASTIK/JINDAL/Bharat Steel tube/ZENITH/Indian Tube Company

Material and labour for straight Through Heat shrinkable type Cable Joint Kit including Jointing Materials for making Joints of LT UG Electric Cable 1100 Volt Grade Heavy Duty with XLPE insulated Aluminium Stranded Conductor of size 50 to 95 Sqmm x 3½ Core and Testing complete all as specified and as directed. Make: Densons/ M Seal/ Raychem/ Siemens / Birla 3M/ Mahindra & Mahindra

Material and labour for straight Through Heat shrinkable type Cable Joint Kit including Jointing Materials for making Joints of LT UG Electric Cable 1100 Volt Grade Heavy Duty with XLPE insulated Aluminium Stranded Conductor of size 120 to 185 Sqmm x 3½ Core and Testing complete all as specified and as directed. Make: Densons/ M Seal/ Raychem/ Siemens / Birla 3M/ Mahindra & Mahindra

Material and labour for straight Through Heat shrinkable type Cable Joint Kit including Jointing Materials for making Joints of LT UG Electric Cable 1100 Volt Grade Heavy Duty with XLPE insulated Aluminium Stranded Conductor of size 240 to 300 Sqmm x 3½ Core and Testing complete all as specified and as directed. Make: Densons/ M Seal/ Raychem/ Siemens / Birla 3M/ Mahindra & Mahindra

Material and labour for finding cable fault with electronic fault detector in LT UG cable of size upto 300 sqmm x 3.5 core complete including necessary earth work excavation all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs MCCBs 100/125 Amps, 16 KA, 4 pole, 415 Volts with adjustable thermal and adjustable magnetic settings with extended copper terminals complete all as specified and as directed by Engineer-in-Charge. Make : Larsen &Toubro/ ABB/ Siemens/ Schneider/ Havells/ Legrand/ Indo ASIAN/ C & S Electric/ BhartiaCuttler Hammer (BCH)/Benlo

Supply and fix in repairs MCCBs 160 Amps, 36 KA, 4 pole, 415 Volts with adjustable thermal and adjustable magnetic settings with extended copper terminals complete all as specified and as directed by Engineer-in-Charge. Make : Larsen &Toubro/ ABB/ Siemens/ Schneider/ Havells/ Legrand/ Indo ASIAN/ C & S Electric/ BhartiaCuttler Hammer (BCH)/Benlo

Supply and fix in repairs MCCBs 250 Amps, 36 KA, 4 pole, 415 Volts with adjustable thermal and adjustable magnetic settings with extended copper terminals complete all as specified and as directed by Engineer-in-Charge. Make : Larsen &Toubro/ ABB/ Siemens/ Schneider/ Havells/ Legrand/ Indo ASIAN/ C & S Electric/ BhartiaCuttler Hammer (BCH)/Benlo

Supply and fix Current Transformer of ratio 300/5A with frequency 50Hz, class 1.0 voltage ranging upto 660 Volts, having long life expectancy, shock hazard including taking down old unserviceable Current Transformer complete all as specified and directed by Engr-in-Charge. Make- Schneider, L&T, Siemens, AE, Crompton Greeves, Mumbai

(a) MCCB 4 pole ,Ics=100%Icu- 35/36 KA, 415 Volts, 400 Amps , with thermal adjustable and fixed magnetic setting with extended terminals - 01 No (b) MCCB 4 pole ,Ics=100%Icu- 16 KA, 415 Volts, 125 Amps , with thermal adjustable and fixed magnetic setting with extended terminals - 02 Nos (c) MCCB 4 pole ,Ics=100%Icu- 16 KA, 415 Volts, 100 Amps , with thermal adjustable and fixed magnetic setting with extended terminals - 02 Nos (d) MCCB 4 pole ,36 KA, 415 Volts, 250 Amps ,50 Hz with thermal and fixed magnetic setting - 01 No Make of MCCB: Larsen &Toubro/ ABB/ Siemens/ Schneider/ Havells/ Legrand/ Indo ASIAN/ C & S Electric/ Bhartia Cuttler Hammer (BCH)

(a) MCCB 4 pole ,Ics=100%Icu- 35/36 KA, 415 Volts, 250 Amps , with thermal adjustable and fixed magnetic setting with extended terminals - 01 No (b) MCCB 4 pole ,Ics=100%Icu- 16 KA, 415 Volts, 125 Amps , with thermal adjustable and fixed magnetic setting with extended terminals - 01 No (c) MCCB 4 pole ,Ics=100%Icu- 16 KA, 415 Volts, 100 Amps , with thermal adjustable and fixed magnetic setting with extended terminals - 02 Nos (d) MCB SPN 63 Amps, 240 volts, 10KA 'C' curve- 04 Nos (e) Timer switch 4 Pole 415 Volts with ML-2 Contactor-01 No (f) MCCB 4 pole ,16 KA, 415 Volts, 63 Amps ,50 Hz with thermal and fixed magnetic setting - 02 No Make of MCCB/MCB: Larsen &Toubro/ ABB/ Siemens/ Schneider/ Havells/ Legrand/ Indo ASIAN/ C & S Electric/ Bhartia Cuttler Hammer (BCH)

Material and labour for earthing complete with Galvanised steel earth plate electrode 60cm X 60cm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of earth the plate not less than 1.5 metres below normal ground level, connected to plate with GI earth wire 32 x 6mm GI earth strip, 7.5m long from earth point to test point and other end connected to control board / panel / equipment, laid under floors/plinths or fixed on walls or concealed in wall etc by means of bolts, nuts, check nuts and washers made out of galvanized iron or steel with provision of charcoal & common salt not less than 50Kg and 20Kg benzonite powder, in each earthing packed up to maximum 30 cm on both side of plate and GI strip protected by 40mm bore light grade galvanized iron pipe, MS funnel, PCC chamber in cement concrete 1:3:6 type C1 and finished even and smooth without using extra cement, 50 mm thick RCC cover 1:2:4 type B1 including 10 mm dia deformed bars @100 mm c/c on both ways for full size of chamber complete all as per electrical plate No 3 and engraving of earth marking on nearby structure/ building with cement mortar 1:4 plate of size 200mm x 150mm x 15mm thick including necessary excavation and earth work in any type of soil/strata & testing complete all as specified and as directed by Engineer-in-Charge. Note :- (i) Contractor should submit test report of earthing after installation to Engineer -in-Charge

Supply and fix GI strip 32mmX6 mm buried in ground/on wall, extension of existing earthing lead complete all as per specified and directed by Engineer - in - charge.

Material and labour for cutting or cutting the existing Bitumen Road /hard standing to size not exceeding 45cm wide and depth not less than 45cm for passing of UG cable through GI pipe and making good the disturbed surface filled with excavated material and top 200mm depth with plain cement concrete 1:3:6 type C1 using 20mm graded aggregate complete all as specified and directed.

Material & Labour for cleaning of E/M installations / campus, surface dressing or trimming of branches of trees, cutting/ dressing of natural grass from ground to remove small unequalities, n.exc 15 cm deep ( including removing vegetation / shrubs / brush wood / under-growth ), earth heaps, cleaning of drains & carrying away the rubbish to a distance of n.exc 50 mtr away complete, the area of each installation up to 700sqm complete all as specified and directed by Engr-in-Charge. Note- Quoted rate is for each installation

Repair/maint of Capacitor bank APFC panel of 66 to 125 KVAr, disconnecting and taking out U/S LV capacitors, Protection brunch, Cooling fan, connectors, Power contactors, Controller etc from housing and including fixing new above items, all connection and testing to maint PF above 0.95 complete all as specified and directed by Engineer-in-Charge. Note: Capacitors and other items shall be measured and paid separately in respective items.

Supply only heavy duty Power capacitors bank 25 KVAR, cylindrical type, suitable for 440 Volt AC,3 phase ,50 Hz confirming to IS:13340-1993 complete all as specified and directed by Engineer-in-Charge. Make: L&T / Havells / Schneider / ABB / Legrand / Siemens / Epcos

All as per item No 31 described here-in-before but of capacity 15 KVAR

All as per item No 31 described here-in-before but of capacity 10 KVAR

All as per item No 31 described here-in-before but of capacity 5 KVAR

Supply only capacitor duty contactor 3 phase, 415V,suitable for 7.5/5 KVAR rating capacitor. Make :L&T, model: MO C05 or equivalent.

Supply only capacitor duty contactor 3 phase, 415V,suitable for 10 KVAR rating capacitor. Make :L&T, model: MO C10 or equivalent.

Supply only capacitor duty contactor 3 phase, 415V,suitable for 15 KVAR rating capacitor. Make :L&T, model: MO C15 or equivalent.

Supply only Current Transformer having Ratio 200/5, 15 VA Make- Larsen &Tubro/ Siemens/ ABB/ Schneider

Material & Labour for painting the old Main LT panel board including scrapping and removing the old painted surfaces and painting /matching the same colour paint with two coats of super enameled paint ( Smoke grey) and without distrubing the existing electric system all as specified and directed by Engineer-in-Charge. Make : Asian Paints/ Nerolac Paints/ Dulux ( Akzonobel)/ Nippon Paint India Pvt Ltd

Material & Labour for labour for welding broken doors of LT Panel (front and rear door) including replacing the required new hinges, nuts and bolts, locking arrangement and refixing the covers without disturbing the existing electric system complete all as specified and directed by Engr-in-charge.

Decarbonising of LT panel board/ Feeder pillar boxes by CTC (Carbon Tetra Chloride) removing the carbon deposited inside the panel, cleaning the panel with cotton waste, applying one coat of becktol red solution, checking the fault inside the panel board, charging the LT panel post completion of decarbonisation complete all as specified and directed by Engr-in-charge..

Supply and fix aluminium bus bar chamber 100 Amps 4 pole 415 volts with all fixing accessories etc complete all as specified and as directed by Engineer-in-Charge. Make : C&S / Havells / L&T / Legrand/ Siemens/ ABB/ Crompton Greaves

Supply and laying for cable in trenches or passing through pipe or on wall by saddling XLPE insulated, heavy duty, 1100 V grade electric cable with aluminium conductor, balance stranded copper, PVC inner sheathed for 1100 volts grade of size 16 sqmm 4 core including taking down complete all as specified and as directed by Engineer-in-Charge. Make: Cable Corporation of India (CCI)/ Asian Cable Co, Chattisgarh/ Finolex/ Polycab/ Gloster/Universal/ RPG Cables Ltd , Thane/ Havells India Ltd/ RR Kabel/ KEI Industries Ltd(KEI)

Supply and laying for cable in trenches or passing through pipe or on wall by saddling XLPE insulated, heavy duty, 1100 V grade electric cable with aluminium conductor, balance stranded copper, PVC inner sheathed for 1100 volts grade of size 1.5 sqmm 3 core including taking down complete all as specified and as directed by Engineer-in-Charge. Make: Cable Corporation of India (CCI)/ Asian Cable Co, Chattisgarh/ Finolex/ Polycab/ Gloster/Universal/ RPG Cables Ltd , Thane/ Havells India Ltd/ RR Kabel/ KEI Industries Ltd(KEI)

Supply & Fix LED Indicating lamp of main supply indicating 'R', 'Y', 'B' (set of three) complete all as directed by engr-in-charge Make- Larsen &Tubro/ Siemens/ ABB/ Schneider/ Japuria/ EPCOS

Material & Labour for Danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with M.S. clamps, bolts and nuts of approved size, for LT, 20x15cm size complete all as specified and as directed by Engineer-in-Charge.

(a) MCCB 4 pole ,Ics=100%Icu- 35/36 KA, 415 Volts, 160 Amps , with thermal adjustable and fixed magnetic setting with extended terminals - 01 No (b) MCCB 4 pole ,Ics=100%Icu- 16 KA, 415 Volts, 63 Amps , with thermal adjustable and fixed magnetic setting with extended terminals - 02 Nos (c) MCCB 4 pole ,Ics=100%Icu- 16 KA, 415 Volts, 40 Amps , with thermal adjustable and fixed magnetic setting with extended terminals - 02 Nos (d) MCB SPN 32 Amps, 240 volts, 10KA 'C' curve- 04 Nos (e) MCB FP 40 Amps, 240 volts, 10KA 'C' curve- 01 No Make of MCCB/MCB: Larsen &Toubro/ ABB/ Siemens/ Schneider/ Havells/ Legrand/ Indo ASIAN/ C & S Electric/ Bhartia Cuttler Hammer (BCH)

Note: Deduct Credit for demolished / dismantled material of Rs. (-) 58,205.00 (Minus) as listed in Schedule of Credit. Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum'

N.S.ENTERPRISES (BID ID -3453592)