WRDD/EEAM/COB/eNIT-12/2025-26

Earthing with 80 mm dia GI pipe (TATA-Medium)x 3.0 Mts. long and 1 x 19/8 stranded GI (Hot Dip) wire (4 Mts. long), 25 mm dia x 150 mm long galvanized bolt, double nuts, double washers including socketing at both ends of stranded GI (Hot Dip) wire by crimping sockets/ thimbles and S & F 40 mm dia GI pipe (ISI-Medium) protection (3 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 3.65 Mts. Ref.:- PWD (WB) Schedule of Rates 2017 for Electrical Works, P/G-1, Item No. - 2,(b);

Cutting channel of 43 mm x 43 mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works Ref.:- PWD (WB) Schedule of Rates 2017 for Electrical Works, P/E-2, Item No. - 4,(b);

25 mm dia 3 mm thick polythene pipe with 1x14 SWG GI earth continuity wire.

Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works. Ref.:- PWD (WB) Schedule of Rates 2017 for Electrical Works, P/E-17, Item No. - 1,(a),(b),(c),(e),(f);

2 Row 18 Module.

2 Row 12 Module.

8 Module.

6 Module.

4 Module.

Supplying & Fixing GI Modular Switch Board of the following sizes complete with top cover plate flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works.

2 Module.

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required.

3 x 22/0.3 (1.5 sqmm)

2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC

2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe (for horizontal & vertical run in wall and celing portion through prelaid polythen pipe) complete with all accessories embedded in wall to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending good damages to original finish. 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC.

Average run 10 mtr.

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point incl. S&F 240 V 6A 3 pin Modular type plug socket & Modular type switch (Brand approved by EIC) incl. S&F earth continuity wire, fixed on 4 Module GI switch board with 3/4 Module top cover plate flushed in wall incl. mending good damages to original finish. 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC. Ref.:- PWD (WB) Schedule of Rates 2017 for Electrical Works, P/E-20, Item No. - 3,(i);

On Board

Supply & Fixing 240 V 6 A Modular type switch (Brand approved by EIC) on existing GI Modular type switch board having top cover plate and making necessary connections as required. Ref.:- PWD (WB) Schedule of Rates 2017 for Electrical Works, P/E-17, Item No. - 3,(a);

Supply & Fixing 240 V 16 A Piano key type switch (Brand approved by EIC) on GI Modular type switch board having top cover plate and making necessary connections as required. Ref.:- PWD (WB) Schedule of Rates 2017 for Electrical Works, P/E-17, Item No. - 3,(b);

Supply & Fixing 240 V, 6A, 5 pin Modular type plug socket (Brand approved by EIC), without switch & plug top, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. Ref.:- PWD (WB) Schedule of Rates 2017 for Electrical Works, P/E-17, Item No. - 4,(a);

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. Ref.:- PWD (WB) Schedule of Rates 2017 for Electrical Works, P/E-17, Item No. - 4,(b);

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. Ref.:- PWD (WB) Schedule of Rates 2017 for Electrical Works, P/E-17, Item No. - 4,(c);

Supply & Fixing RJ45 sitable for CAT6 cable (Brand approved by EIC) with PVC board and top cover plate on wall and making necessary connections & testing as required. Ref.:- PWD (WB) Schedule of Rates 2017 for Electrical Works, P/E-18, Item No. - 8,(a);

Supply & Fixing Telephone socket (RJ11) Modular type (Brand approved by EIC) with PVC board and top cover plate on wall and making necessary connections & testing as required. Ref.:- PWD (WB) Schedule of Rates 2017 for Electrical Works, P/E-18, Item No. - 8,(b);

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc. Ref.:- PWD (WB) Schedule of Rates 2017 for Electrical Works, P/E-18, Item No. - 10;

Supply of 1200-1400 mm sweep, 3 blade, 230 CMM Air Delivery, 77 w power input power ceiling fan. (Cromton, Havells, Usha etc.) Ref.:-Approved rate of Siliguri (A-M) Circle.

Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991) Ref.:- PWD (WB) Schedule of Rates 2017 for Electrical Works, P/D-14, Item No. - 29;

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire. Ref.:- PWD (WB) Schedule of Rates 2017 for Electrical Works, P/C-3, Item No. - 21(a);

Fixing only single/twin fluorescent light fitting complete with all accessories directly on wall/ceiling by screws etc. Ref.:- PWD (WB) Schedule of Rates 2017 for Electrical Works, P/C-2, Item No. - 14(a);

Supply,fitting and fixing of designer LED Strip Light including adopter for false ceiling. Ref.:-Approved rate of Siliguri (A-M) Circle.

Supply,fitting and fixing of 12 watt recessed mounted panel series light for false ceiling. (Philips,Havells, Cromton) Ref.:- Rate analysis is enclosed vide Annexure (A).

Supply,fitting and fixing including transportation of Decorative Post top for 360° indirect lighting with IP 65 protection, resistant to impact and corrosion and glare-free and better uniformity for landscape. LED gate light. (Crompton, Havells etc.) Ref.:-Approved rate of Siliguri (A-M) Circle.

Supply and fitting, fixing SMC junction box/Plastic rectangular street light pole box and making necessary connections to the street light all complete as per direction of the EIC. Ref.:- Approved rate of Siliguri (A-M) Circle.

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required. 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC. Ref.:- PWD (WB) Schedule of Rates 2017 for Electrical Works, P/E14, Item No. - 1,(a),(ii);

Supply and fitting, fixing 2 ton A.C. stabilizer on wall and mending good damages to original finish. Ref.:- Approved rate of Siliguri (A-M) Circle.

Repair and servicing of 1.5 Ton 3 Star Split A.C. including supply, fitting, fixing and installation of 1.5 Ton Non-Inverter AC Compressor, Gas Charging, Indoor Unit PCB, Running Copper Pipe, by connecting with copper pipe all complete. (Bluestar). Ref.:- Rate analysis is enclosed vide Annexure (B).

Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75m). In ground floor including roof. Above 150 mm. thick. Ref.:- PWD (WB) Schedule of Rate 2017 for Building Works. P-10, Item No. - 02,(b);

Damp proof treatment with 2 coat Latex addmixture, Wall Shield 2k and water proof putty after having proper scrapping, cleaning, washing etc complete. Ref.:-Approved rate of Siliguri (A-M) Circle.

Ordinary Cement concrete (Mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement , if any, in ground floor as per relevant IS codes. River Bazree. Ref.:-PWD Schedule of Rate 2017 for Building Works; 3 rd Corrigenda and Addenda dated 04/06/2018. P-24, Item No. - 04,(b);

Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). Sal : Siliguri. Ref.:- PWD (WB) Schedule of Rates 2017 for Building Works, P-114, Item No. - 1,(c);

Shutters of 2/3rd panel and 1/3rd glazed of doors and windows as per design (each panel consisting of a single plank without joint and with ordinary glass of 7.4kg. Per sq.m./3mm thick) fitted with putty bed and teak wood beads and nails including fitting and fixing shutters in position but excluding the cost of glass, putty, teak bead, nails, hinges etc. and other fittings, in ground floor. 40mm thick shutters with 19mm thick panel. Sishu, Gamar, Champ, Badam, Bhola, Mogra, Hallak. Ref.:- PWD (WB) Schedule of Rates 2017 for Building Works, P-121, Item No. - 7,(ii),(b);

Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3-track sliding window with fixing of glass (excluding cost of glass) all complete as per architectural drawings and direction of Engineer-in-charge. 10-12 Micron thickness Annodizing film. Natural white Ref.:- PWD (WB) Schedule of Rates 2017 for Building Works, P-245, Item No. - 15;

Supplying, fitting & fixing of partly glazed partly panelled or fully glazed single leaf Aluminium swing door of all aluminium sections viz door frame ( top and side frame), shutter( top rail, bottom rail, lock rail, door vertical) , glazing clip made of Aluminium Alloy Extrusions conforming to IS: 733-1983 and IS: 1285-1975, annodized conforming to IS:1868-1983, fitted with all other accessories viz. EPDM gusket,cleat, angle screws etc. including labour charges for fitting and fixing of aluminium door with door spring,/aluminium hinges, glass / Panel board all complete as per architectural drawings and direction of Engineer-incharge. ( Excluding cost of glass/ panel board, door spring/ Al hinges, door closer, door stoper, handle, tower bolt and locking arrangment etc) 10-12 Micron thickness Annodizing film. Natural white Ref.:- PWD (WB) Schedule of Rates 2017 for Building Works, P-246, Item No. - 16;

Providing and fixing false ceiling at all height including providing and fixing of frame work….(ISI Mark on Board) Ref.:- PWD (WB) Schedule of Rates 2017 for Building Works, P-165, Item No. - 17, 5th Corrigenda and Addenda dated 16/04/2019.

Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. Wall. With Sand and Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. Area of each tile above 0.09 Sq.m Coloured decorative. Ref.:- PWD (WB) Schedule of Rates 2017 for Building Works, P-64, Item No. - 35,(B),(b),(i); 3 rd Corrigenda and Addenda dated 04/06/2018.

Supply, fitting and fixing of Incumbency Board, Calender Board and Door Name Plate Board by means of cutting ACP/Acrylic Board into requisite shape and size , Designer Vinyle paper pasting and cutting Golden Word Paper all complete as per direction of the EIC. Ref.:- Rate analysis is enclosed vide Annexure (C).

Labour for fitting and fixing high density poly-ethylene pipes or P.V.C. pipes for above ground work including cost of jointing materials paints etc. fitting and fixing all necessary specials, cutting pipes, making threads, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps(any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineer-in-charge. (Payment will be made on centre line measurement of the total pipeline including specials. ) Above Ground. Ref.:- PWD (WB) Schedule of Rates 2017 for Sanitary and Plumbing Works, P-11, Item No. - 18,(A),(iii),(v),(vi);

25 mm dia.

Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). PVC Pipes. Ref.:- PWD (WB) Schedule of Rates 2017 for Sanitary and Plumbing Works, P-13, Item No. - 19,(III),(A);

25 mm dia.

Socket. Ref.:- PWD (WB) Schedule of Rates 2017 for Sanitary and Plumbing Works, P-14, Item No. - 19,(III),(B);

25 mm dia.

Elbow. Ref.:- PWD (WB) Schedule of Rates 2017 for Sanitary and Plumbing Works, P-14, Item No. - 19,(III),(C);

25 mm dia.

Tee. Ref.:- PWD (WB) Schedule of Rates 2017 for Sanitary and Plumbing Works, P-15, Item No. - 19,(III),(E);

25 mm dia.

Reducing Elbow (mm X mm). 25 X 20. Ref.:- PWD (WB) Schedule of Rates 2017 for Sanitary and Plumbing Works, P-18, Item No. - 19,(III),(N);

Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. 1050 mm long. Ref.:- PWD (WB) Schedule of Rates 2017 for Sanitary and Plumbing Works, P-43, Item No. - 9,(v);

Supplying, fitting and fixing pillar cock of approved make. CP Pillar Cock with 200 mm extended Lever Handle (Equivalent to Code No. 5031 & Model - FLORENTINE of JAQUAR or similar brand). Ref.:- PWD (WB) Schedule of Rates 2017 for Sanitary and Plumbing Works, P-45, Item No. - 19,(f),(i);

Supplying, fitting and fixing of approved brand and make.Chromium plated Hand shower with Flexible Tube & fittings(Equivalent to Code No. Hsh-1937 & (Equivalent to Code No. 5037 & Model - Florentine of Jaquar or similar). Ref.:- PWD (WB) Schedule of Rates 2017 for Sanitary and Plumbing Works, P-4, Item No. - 3,(b),(d),(e);

Supplying, fitting and fixing bib cock or stop cock. Chromium plated Bib Cock (angular shape with wall flange) (Equivalent to Code No. 5037 & Model - Florentine of Jaquar or similar brand). Ref.:- PWD (WB) Schedule of Rates 2017 for Sanitary and Plumbing Works, P-6, Item No. - 7,(c), (i)

Supplying, fitting and fixing bib cock or stop cock. Chromium plated concealed Stop Cock heavy duty (Equivalent to Code No. 5083 & Model - Florentine of Jaquar or similar brand). Ref.:- PWD (WB) Schedule of Rates 2017 for Sanitary and Plumbing Works, P-6, Item No. - 7,(d),(ii);

Suppling, fitting and fixing Wall mounted water closet of white glazed vitreous chinaware of approved make and brand in position complete with necessary nut and boalts (Equivalent to Code No. 20061 or 92065 &Model Studio or Rubbic of Hindware or equivalent.) Ref.:- PWD (WB) Schedule of Rates 2017 for Sanitary and Plumbing Works, P-79, Item No. - 5;

Supplying, fitting and fixing 10 litre porcelain low-down cistern of approved make with either side or bottom inlet, side overflow, brackets complete with all internnal PVC fittings. White. Ref.:- PWD (WB) Schedule of Rates 2017 for Sanitary and Plumbing Works, P-36, Item No. - 1;

Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm. Ref.:- PWD (WB) Schedule of Rates 2017 for Sanitary and Plumbing Works, P-82, Item No. - 19;

Supplying, fitting and fixing towel rail with two brackets. C.P. over brass. 25 mm dia. and 750 mm long each. Ref.:- PWD (WB) Schedule of Rates 2017 for Sanitary and Plumbing Works, P-82, Item No. - 22,(a),(iii);

Adding G.S.T. @ 18 % on all items except item no. 16,20,21,22,23,25,26,28,36

Adding Labour Welfare Cess @ 1 % on all items

Please Enable Macros to View BoQ information