REPAIR MAINTENANCE OF LT PANELS UG CABLES AND OTHER EXTERNAL WORK AT RASHI AREA AND REPAIR REPLACEMENT OF EXISTING FITTINGS AND FIXTURES WITH MODULAR FITTINGS IN CERTAIN SAILORS MARRIED ACCN AND OTM OF LOW RISE BUILDINGS AT OLD AND NEW NAVY NAGAR

Amount

Excavation in trenches not exc 1.5 mtr wide and not exc1.5 mtr in depth for laying of cables etc. in any type of soil and getting out all as specified and directed by Engineer-in-Charge. Note : Rate includes removing of paver blocks carefully and stack properly for refixing after laying of cables .

Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in soils.

Removing excavated material from the site of work and transporting out of Station/site of work suitable to the contractor all as specified.

Supply, filling, spreading levelling and well ramming the river sand around cable in trenches for cable cushioning all as specified and directed.

Material and labour for 60 mm thick coloured interlocking paver tiles/ blocks, lacquer finish of size 250x250 mm having compressive strength of 35N/Sqmm, zig-zag (uni-paver) shape in flooring tested as per IS : 15658-2006, with and including layer of 50 mm thick natural river sand bed compacted complete as specified and directed.

Supply, laying un-reinforced precast concrete cable cover class LV type 1 flat size 250mm x 150 mmx 40 mm.

Cutting existing road surfaces or hard standing 0.45 mtr depth (22 thick comprising bituminuous topping) for laying of pipes/cables and making good disturbed surfaces to match with existing surfaces.

Material and labour for cement concrete type C-2, 1:3:6 (40mm graded stone aggregate), for coping and finished surface without using extra cement.

Supplying and laying with commissioning and testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of size 185 sqmm 3.5 core laid in trenches, passing through pipes, fixed on walls complete including connecting properly by means of thimbles and taking out old u/s damaged cables.

All as per Item No-9.00 here in before but of sizes, 150 sqmm, 3.5 core.

All as per Item No-9.00 here in before but of sizes, 120 sqmm, 3.5 core.

All as per Item No-9.00 here in before but of sizes, 95 sqmm, 3.5 core.

All as per Item No-9.00 here in before but of sizes, 70 sqmm, 3.5 core.

M&L for 110mm dia High density poly-ethylene pipes (HDPE) of pressure 6 kgf/cm2 pipe, for road crossing of cable or for cable protection laid in trenches or above ground surface all as specified and directed.

All as per Item No-14.00 here in before but of HDPE sizes 90mm.

All as per Item No-14.00 here in before but of HDPE sizes 75mm.

M&L for GI pipe ,light grade 100mm dia for road crossing or in hard standing for protection of cable above or under ground surface including taking out old one all as specified and directed.

Supply, install, testing and commissioning of meter cabin panel mounted on angle iron frame 40x40x5 mm grouted on floor,cubical indoor type for 415V, 3 phase, 4 wire made out of 2 mm thick CRCA sheet weather, vermin proof factory fabricated, CPRI approved, front open hinged door with locking arrangement powder coated, individual compartment for MCCBs and 200 Amps rated copper bus bar(All in equal size), top and bottom cable entry with proper size glands including disconnecting cable connections and electronic meters from old meter cabin panel and fixing & connecting in new installed panel with provisions of thimble/lugs and making provisions of vision glasses for meter readings, one spare MCCB compartment, and including PCC on 1:2:4 type B-1 for fixing meter cabin at old meter cabin place complete all as specified and as directed comprising of the following :- Make:- ABB/Legrand/Electro power control/L&T

(a) S&F MCCB 160 Amps, 4 Pole, 25 kA, thermal magnetic release, Ics=100% Icu - 01 Nos,

(b) S&F MCCB 100 Amps, 4 Pole, 16 kA, thermal magnetic release, Ics=100% Icu - 02 Nos,

(c) Supply & fix of single phase smart meter , tamper proof, static meter of class 1.0, 240V, 50Hz, 10-60A anti temper feature as per IS 16444. - 10 Nos. Make L&T/Elmeasure/Panasonic (Anchor)/Siemens

(d) S&F MCB SPN 32 Amps, 10 kA, - 08 Nos,

(e) Digital panel meter with LCD multifunction meter with CT/PT and all parameters as V,A,F,PF,KW,kVAR,kWH etc of

(f) Phase indicator lamp R,Y & B (Set of 3)- 01 Set

(g) S&F Copper Bus bar 320 Amps of suitable size, all are in equal size - Set 1(R, Y, B, N)

(h) S & F sheet metal enclosure with plug , socket and MCB 20 Amps complete all as direcred.

Note: All existing cable connections will be disconnected from old Panel carefully and re-connected with new Panel by providing glands and thimble all as directed by Engineer-in-Charge.

Supply, installing, testing and commissioning of LT feeder pillar box factory made cubical outdoor type, slopy canopy fabricated out of 3.15mm thick CRCA sheet with angle iron base frame made of 40x40x6mm, 45cm height, floor mounted duly bolts and nuts grouted, dust and vermine proof, suitable for voltage 415V 3 phase 4 wire weather proof with IP-66 protection, with separate hinge door for each compartment for incoming and out going MCCB etc with locking arrangement, with back door openable (Screwed), legs grouted in PCC complete including painting with two coats of epoxy powder paint over a coat of primer after under going a rigorous metal treatment process involving alkaline degreasing, descaling in dilute sulphuric acid or any other acid and phosphate and with copper busbar (TPN), suitable double compression copper cable glands complete in all respect for bay work station and including provn of the following:- Note: All existing cable connections will be disconnected from old Panel carefully and re-connected with new Panel by providing glands and thimble all as directed by Engineer-in-Charge.

(a) MCCB 250A, 25KA, FP withThermal magnetic release,lcs=100% lcs -01 Nos,

(b) MCCB 100Amp,16KA, FP with Thermal magnetic release, lcs=100% lcs-05 Nos,

(c) MCCB 63Amp,16KA, 4P with Thermal magnetic release, lcs=100% lcs-01 Nos

(d) Digital panel meter with LCD multifunction meter with CT/PT and all parameters as V,A,F,PF,KW,kVAR,kWH etc of

(e) Phase indicator lamp R,Y & B (Set of 3)- 01 Set

(f) Analog Time switch Micro Rex QT31 - 01 Nos

(g) Power Contactor 63A, 4 NO Contactor - 01 Nos

(h) S&F Copper Bus bar 400Amps of suitable size, all are in equal size - Set(R,Y,B,N)

(j) S & F sheet metal enclosure with plug , socket and MCB 20 Amps complete all as direcred.

All as per Item No 19.00 above but comprising of the following :-

(a) MCCB 630A 36KA, FP withThermal magnetic release,lcs=100% lcs -01 Nos

(a) MCCB 400A, 36KA, FP withThermal magnetic release,lcs=100% lcs -01 Nos

(a) MCCB 250A, 25KA, FP withThermal magnetic release,lcs=100% lcs -02 Nos

(a) MCCB 200A, 16KA, FP withThermal magnetic release,lcs=100% lcs -02 Nos

(c) S&F MCB DP 40 Amps, 10 kA, - 041Nos

(d) Digital panel meter with LCD multifunction meter with CT/PT and all parameters as V,A,F,PF,KW,kVAR,kWH etc of

(e) Phase indicator lamp R,Y & B (Set of 3)- 01 Set

(f) S&F Copper Bus bar 800Amps of suitable size, all are in equal size - Set(R,Y,B,N)

(g) S & F sheet metal enclosure with plug , socket and MCB 20 Amps complete all as direcred.

Note for item No 18-20 : The panel board shall be fabricated from CPRI approved manufacturer and panel drawing shall be submitted by contractor for approval before placing the order.

S&F in repair, MCCBs in existing FP/panel, connecting to bus-bar with all connecting accessories and modification in busbar (if Necessary), connection complete and testing after completion, all as specified and directed, of following capacities :-

(a)MCCB 63 Amps,16 kA,FP, 50 Hz,Thermal magnetic release,lcs=100% lcu.

(b)MCCB 100 Amps,16 kA,FP,50 Hz,Thermal magnetic release,lcs=100% lcu.

(c)MCCB 160 Amps,25 kA,FP,50 Hz,Thermal magnetic release,lcs=100% lcu.

(d)MCCB 200 Amps,25 kA,FP,50 Hz,Thermal magnetic release,lcs=100% lcu.

(e)MCCB 250 Amps,36 kA,FP,50 Hz,Thermal magnetic release,lcs=100% lcu.

(f)MCCB 320 Amps,36 kA,FP,50 Hz,Thermal magnetic release,lcs=100% lcu.

(g) MCCB 400 Amps,36 kA,FP,50Hz,Thermal magnetic release,lcs=100% lcu.

M & L for earthing complete with galvanized steel earth plate electrode 600 X 600 X 6 mm thick buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m below normal ground level connected to galvanized earth strip 32 X 6mm by means of bolts, nuts and washers of galvanized iron or steel upto the test point all as shown in electrical plate No.3 of SSR Part-I connected toExisting earth strip including PCC earth pit with CI cover, GI funnel with wire mesh, GI protection pipe of 40 mm dia for earth lead and 20mm GI pipe for watering, excavation and earth work in any type of soil, filling the pit with charcoal and common salt surrounding the earth plate complete all as specified and directed by Engr-in-Charge including testing on completion.

M&L scrapping old worn out paint from complete indoor/outdoor panels and painting with one coats of synthetic enamel paint (incl front door in side and indl compartment outer side etc also) over a coat of primer and spray painting complete including fixing sticker danger sign board suitable for LT panel board all as specified and as directed by engr-in-charge.

M&L for shifting of LT panel of any size with all accessories and fixing it to other location as directed by Engr-in-Charge at site, connecting cable connection with connecting accessories, incl foundation in PCC 1:3:6 type C2 all as specified and directed.

M&L for straight through joint, heat shrinkable tubular type of size 25 to 50 sqmm,3.5 core, 1100 volts grade complete all as specified and directed.

All as per Item No-25.00 here in before but of sizes, 70 to 120 sqmm, 3.5 core.

All as per Item No-25.00 here in before but of sizes, 150 to 185 sqmm, 3.5 core.

Supply and installation of Smart Single Phase Meter with the following specifications: (i) AC Single phase Two Wire, Tamper Proof, Static Meter of Class 1.0, 240 V, 50 Hz, 10 A-60 A conforming to IS-16444 and relevant IEC standards with inbuilt 865-867 MHz Radio Frequency communication facility with self-healing Mesh network with defalult and on demand display, biling date generation facility, anti-tamper features. Microprocessor and LED/LCD based circuitry. (ii) Meter should support the following data : 30 min instaneous data for voltage, current, power factor, power, cumulative energy and frequency, 30 load survey date for energy, mopntly billing survey for cumulative energy and Max Demand. (iii) Meter should have connect/disconnect functionality operable from prepaid billing software. (iv) The meter should support open communication protocol DLMS with the software. MAKE: Secure, L&T, Schneider and HPL,Elmeasure. Note: (a) The contractor would be responsible from removing the existing meter, noting down the reading and depositing it with the MES. (b) It would be possible to run the meter in both prepaid and postpaid mode. (c) The meters would carry 5 year warranty.

Taking down carefully copper/ aluminium point wiring i.e. light, fan, socket or power/points complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. and making good disturbed surfaces of ceiling, walls, floors, etc.

M & L for point wiring with PVC insulated unsheathed single core multi stranded copper conductor 1.5 sqmm, 1100 volts grade cable, FRLS, passing through PVC casing caping including accessories and provision of PVC box for mounting of modular Switchs & Sockets as required at site as directed by Engineer-in-Charge including one run of PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm (green colour) FRLS earth wire and connected to earth dolly for the following:- NOTE : Circuit conductor from MCB DB to Switch boards should not be less than 2.5sqmm. Make of wire:- Polycab/Finolex/Plaza/Havells.

One light/Exhaust/Ceiling fan point controlled by one switch.

One 3 pin switch socket combination 5 Amps on the same board with other switches.

One 3 pin switch socket combination 5 Amps, independent.

One bell point controlled by one push button

All as per item No 30.00 above but with 2.5 sqmm cable for one three pin 15 Amps socket out let controlled by one switch.

S & F in replacement with modular switch, 1 module, single pole one way 6 Amp conforming to IS:3854 and ISI marked complete all as direcred.

S & F in replacement with modular switch, 1 module, single pole one way 16 Amp conforming to IS:3854 and ISI marked complete all as direcred.

S & F in replacement with ceiling rose with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body of size 60x50mm

S & F in replacement with modular socket 6A, 3 pin, 2 module conforming to IS:1293 : 2019 and ISI marked complete all as direcred.

S & F in replacement with modular socket 6/16A, 3 pin, 2 module conforming to IS:1293 : 2019 and ISI marked complete all as direcred.

S & F in replacement with modular bell push switch, 1 module, single pole one way 6Amp ISI marked.

S & F in replacement with modular electric bell ding dong, AC, 230V single pole.

S & F in replacement with modular stepped type fan regulator, 2 module, single pole one way ISI marked.

Supply & Fixing Retrofit LED lamp 7 Watts complete all as specified and directed.

Supply & Fixing Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

Taking out old wooden/PVC board and disconnecting all electric connection from switches, board and S & F modular PVC Gang box, screwless of 8 module for mounting of modular switches and sockets including blank plate for blank module.

All as per Item No- 42.00 above but of modular PVC Gang box, 6 module.

All as per Item No- 42.00 above but of modular PVC Gang box, 3 module.

All as per Item No- 42.00 above but of modular PVC Gang box, 2 module.

All as per Item No- 42.00 above but of modular PVC Gang box, 1 module.

S&F modular white cover plate with frame, 8 module.

S&F modular white cover plate with frame, 6 module.

S&F modular white cover plate with frame, 3 module.

S&F modular white cover plate with frame, 2 module.

S&F modular white cover plate with frame, 1 module.

Taking down unserviceable FTL/batten fittings with supply and fix LED Aluminium housing of batten fitting 20 Watt, 240V, 4ft CDL/NW comprises of aluminium extruded channel in thermally conductive material with decorative end cap and high translucent serration milky white diffuser of high optically efficient plastic FR grade. The luminaire is pre-wired with high efficiency electronic driver having operating voltage 140-270V, P.F >0.95, THD <20% and IP20 protected alongwith provision of two Nos of PVC box of size 75x75x20mm for mounting light fittings including ceiling rose. The contractor shall provide test certificate from authorized lab.

Taking down unserviceable FTL/batten fittings with supply and fix LED integrated polycarbonate housing of batten of 10 Watt 2ft LED give minimum output lumen 1150 lm, efficiency >110, CCT 4000/6500K, CRI >80, power factor >0.9, operating temperature 45 degree celcious, THD <20% of housing polycarbonate extrusion with LED dimension 603mmx22mmx36mm upto 50% energy saving.

Taking out any type of FTL fitting and S&F 10W LED batten with inbuilt smart motion sensor, 230 Volt , 50 Hz , 2 feet, polycarbonate extruted channel, powder coated with diffuser for glare free light, Inbuilt motion sensor prewired with 25% dimmer illuminous in ideal time with all accessories including two Nos of PVC box of size 75x75x20mm for mounting light fittings including ceiling rose complete with following specification. (i) housing-polycarbonate extrusion,diffuser- opal- polymer, LED type- MID power ,Light distribition- general Spread, LED efficiency - > 130 lumen/Watt, System effieciency- > 100 lumen/Watt, Driver efficiency - more than 85%, power factor- more than 0.95, THD - <10%, Mounting/Fixing- Wall/Ceiling, Ingress Protection - IP-20, Sensor type- HF inbuilt integral occupancy/movement sensor, sensor range- upto 5 mtrs(cone formation ), Dimming operation- default operation at 25% of the is rated value. On detection of motion, light output rises to 100% for upto 20 sec . in absence of otion switches back to default operation, LED life- upto 30,000 Hrs.Surge Protection- not less than 2KV. Note:- (i) contractor shall submit LM79 report LM 80Test certificates before claiming for payment .(ii) Warranty certificate for minimum 2 years to be submitted from OEM. Make: Bajaj/Polycab/Halonix/Jaquar.

S&F MCB DB SPN conforming to IP 43 - IK 09 with acrylic door, 8 way complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces by plastering or PCC work inclding distembering to the affetced to walls.

Taking out Old U/S and S&F MCB SPN, 32 Amp, 10 KA, 230 Volt.

Taking out Old U/S and S&F MCB,single pole, upto 20 Amp, 10 KA, 230 Volt.

Taking out unserviceable ceiling fan and deposit to MES Store, supply and replacement with ceiling fan 230V, 50 Hz, AC, 1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) complete with hanging arrangement by down rod alongwith steel wire rope for additional safety in ceiling fan with all allied accessories and connecting up with three core, 0.75 sqmm PVC insulated copper conductor cable complete all as specified.

Taking out unserviceable exhaust Fan and deposit to MES Store, supply and replacement with exhaust fan, 4 blade, heavy duty, double ball bearing, 230V, 50Hz, 300mm sweep having power input 70W speed 1440RPM, with protective bird guard including connecting with three core, 0.75 sqmm PVC insulated copper conductor cable complete all as sepecified and directed.

Taking out unserviceable exhaust Fan and deposit to MES Store, supply and replacement with exhaust fan, 4 blade, heavy duty, double ball bearing, 230V, 50Hz, 400/450mm sweep having power input 70W speed 1440RPM, with protective bird guard including connecting with three core, 0.75 sqmm PVC insulated copper conductor cable complete all as sepecified and directed.

Taking out & Overhauling of ceiling fan any size and Make, dismantling parts, properly cleaning/removing old existing grease oil and applying new oil grease, varnishing of winding, cleaning dust rust and replacing petty items with new as required such as Nuts, Bolts, washers, bushes, ball bearing, cap, fan shaft, rotor, capacitor 2.5/4 Mfd, body cover etc and assembling and connecting complete with copper conductor multi stranded 3 core wire of size 14/0.0076 including one coat of painting and testing after refixing at site complete all as specified and as directed by Engr-in-Charge. Note: Rate of petty items to be replace shall be included in quoted rate.

Taking out & Overhauling of Exhaust fan any size and Make, dismantling parts, properly cleaning/removing old existing grease, oil and applying new oil grease, varnishing for winding, cleaning dust, rust and replacing petty items with new as required such as Nuts, Bolts, washers, bushes, ball bearing, cap, fan shaft, rotor, capacitor 2.5/4 Mfd, body cover etc and reassembling, connecting with copper conductor multi stranded 3 core wire of size 14/0.0076 including one coat of painting complete and testing after refixing at site. Note: Rate of petty items to be replace shall be included in quoted rate.

Taking down deteriorted louvers and supplying and fix new louvers fixed type made out of 1.6mm GI sheet with horizontal ventilation, bending into shape of size 45cmx45cm (outer) with 20x3mm flat iron base of size 45cmx45cm complete by providing of fixing arrangement for louvers upto 5th floor of including rate all as specified and directed by Engr-in-Charge

S & F cable PVC insulated, PVC sheathed, armoured, FRLS, 1100V grade, 2 core 6 sqmm stranded copper conductor electric cable laid on wall/ roof/ duct complete with proper saddling and connecting to DBs with glands including taking out existing unserviceable cable complete all as specified.

S&F in relplacement with new cable PVC insulated three core over all PVC sheathed 2.5 Sqmm stranded copper conductor cable for connecion from DB to connector junction box for power supply to security light fittings drawn in PVC conduit not less than 20mm including taking out old one all as directed.

S & F junction box of size not less than 4x4 inch with connector encloser, 3 terminal/ PVC/ polycarbonate, isolated body including taking out old one.

S&F street light bracket bend to shape made as required of 40mm dia 1.0 mtr long GI pipe light grade fixed to pole/ Wall including M&L for fixing with the help of flat iron clamp of size 40x6mm two numbers with the help of nuts and bolts for fixing of street light fitting on the wall complete after taking out old U/S one all as specified and as directed.

Taking out old unsv security light fitting and S&F new bldg security light 60 watt with inbuilt smart motion sensor with with 25% dimmer illuminous in ideal time with all accessories comprising of epoxy powder coated housing, enclosed with glass cover in frame,(with total lumen output not less than 6000 lumens and suitable wattage for efficiency not less than 100 lumens/Watt) Min 60 watt roadway luminaire type with ingress protection IP 65/66 and SPD of capacity 10 KV etc complete with following specification. (i) housing- epoxy powder coated housing, enclosed with glass cover , LED type- High Power LED ,Light distribution- Bat wing, LED efficiency - > 130 lumen/Watt, System effieciency- > 100 lumen/Watt, Driver efficiency - more than 85%, power factor- more than 0.95 to 0.98, THD - <10%, Mounting/Fixing- GI Bracket, Ingress Protection - IP-65/66, Sensor type- HF inbuilt integral occupancy/movement sensor, Sensor type – Dusk Dawn sensor mounted on LED PCB, sensor range- upto 5 mtrs(cone formation ), Dimming operation- default operation at 25% of the is rated value. On detection of motion, light output rises to 100% for upto 20 sec . in absence of motion switches back to default operation, LED life- upto 50,000 Hrs. Surge Protection - 4 to 10 KV. Note:- (i) contractor shall submit LM79 report LM 80Test certificates before claiming for payment .(ii) Warranty certificate for minimum 2 years to be submitted from OEM.

Taking out old ceiling light fitting and S&F 36W LED ceiling light with inbuilt smart motion sensor, 230 Volt , 50 Hz , 2x2 feet, CRCA sheet metal power coated with diffuser for glare free light, Inbuilt motion sensor prewired with 25% dimmer illuminous in ideal time with all accessories with following specification. (i) housing-Aluminum Extrusion,diffuser- opal,sensor type- HF inbuilt integral occupancy/movement sensor, LED type- MID power, Light distribition- general Spread, LED efficiency - > 130 lumen/Watt, System effieciency- > 100 lumen/Watt, Driver efficiency - more than 85%, power factor- more than 0.95, THD - <10%, Mounting/Fixing- recess mounting, Ingress Protection - IP-20, sensor range- upto 5 mtrs(cone formation ), Dimming operation- default operation at 25% of the is rated value. On detection of motion, light output rises to 100% for upto 20 sec. in absence of otion switches back to default operation, LED life- upto 50,000 Hrs.Surge Protection- not less than 4KV. Note:- (i) contractor shall submit LM79 report LM 80Test certificates before claiming for payment .(ii) Warranty certificate for minimum 2 years to be submitted from OEM. Make: Bajaj/Polycab/Shakti/Jaquar.

S&F in replacement of 20 watt LED RGB under water light IP68 luminaire, size - 190mmx250mm with stainless steel housing with driver including necessary stand for fixing of fountain light with mounting base including making all electrical connection complete.

All as per item No - 70.00 above but LED RGB under water, 12 watt.

Supply and Fixing in replacement for surface of wall light 8 watt on wall complete all as specified and as directed by Engnr-In-Charge. Make Legrand/L&T/Havells/C&S.

Supply and Fixing in replacement for Seat light of suitable watt on seat complete all as specified and as directed by Engnr-In-Charge. Make Legrand/L&T/Havells/C&S.

Supply and Fixing in replacement for track light 12 watt on surface complete all as specified and as directed by Engnr-In-Charge. Make Legrand/L&T/Havells/C&S.

Supply and Fixing in replacement for track rail on wall complete all as specified and as directed by Engnr-In-Charge. Make Legrand/L&T/Havells/C&S.

S&F in replacement of surface mounted round safe LED downlight 12 watt with aluminium die-cast body, finish with drop down PC diffuser to deliver low glare illumination with optimized heat sink for efficient heat dissipation including making all electrical connection complete. Make: Bajaj/Shakti/Signature/Philips.

S&F in replacement of surface mounting LED 36 watt, 4x1 luminaire to enhance the delight of occupants with comfortable experience through its classic design & glare free soft illumination. White powder coated CRCA housing, seamless front frame with flat white high transmission acrylic cover including making all electrical connection complete all as specified. Make-Bajaj/Havells/Wipro/Philips.

Taking down unserviceable FTL and supply and fix Suspension (Pendant) luminaires with efficient Diffuser ensuring perfectly uniform illumination, ensured optimised and unparalleled light distribution LED pendant luminare 20 Watts, 4 ft, box type complete with powder coated CRCA decorative body complete with hanging arrangement all as specified and directed. Make : Bajaj/Philips/C & S/Wipro

Taking down old U/S Highbay Luminaire with aluminium die cast housing for efficient Thermal Heat management and secondary modular lens Optics for optimized Lighting distribution to improve operational efficiency, with EMC/ EMI Complient Potted Driver, Flicker free Illumination highbay lights and Supplying and fix LED 120 Watt Highbay luminaire with diffuser including making all electrical connection complete all as specified. Make-Bajaj/Havells/Wipro/Philips.

Taking down old unserviceable flood light fittings from any height and Supply & fixing LED flood light fittings comprising of epoxy powder coated housing, enclosed with glass cover in frame,(with total lumen output not less than 20000 lumens and suitable wattage for efficiency not less than 100 lumens/Watt) min wattage 200 watt, with ingress protection IP 65/66 and SPD of capacity 10 KV etc incl necessary clamps etc complete and testing on completion all as specified and as directed. Make:Bajaj/Havells/Crompton/Wipro

Material and labour for snap-on adaptable trunking system with cover, angles, bends and all accessories and fitting of size 50x80mm on wall complete all as specified and as directed by Engnr-In-Charge. Make Legrand/Obbo/Honeywell

Taking down unserviceable and Supply and Fixing for dividers of snap-on trunking system on wall complete all as specified and as directed by Engnr-In-Charge. Make Legrand/Obbo/Honeywell

Taking down unserviceable and Supply and Fixing for internal (varies from 80° to 100°), external (varies from 85° to 120°) & Flat (flat angles at 90°) type angles of snap-on trunking system on wall complete all as specified and as directed by Engnr-In-Charge. Make Legrand/Obbo/Honeywell

Taking down unserviceable and Supply and Fixing for cover of snap-on trunking system on wall complete all as specified and as directed by Engnr-In-Charge. Make Legrand/Obbo/Honeywell

Taking down unserviceable and Supply and Fixing for cover joints of snap-on trunking system on wall complete all as specified and as directed by Engnr-In-Charge. Make Legrand/Obbo/Honeywell

Taking down unserviceable and Supply and Fixing for end caps of snap-on trunking system on wall complete all as specified and as directed by Engnr-In-Charge. Make Legrand/Obbo/Honeywell

S&F in replacement of High performance LED Downlights 12 watt for commercial applications 100 lumen/watt efficacy efficient heat sink (die cast) with steel clips integrated driver control on surface complete all as specified and as directed by Engnr-In-Charge. Make Legrand/Obbo/Honeywell

S&F in replacement of robust & reliable IP66 & IK08 protected LED midway with PDC housing & toughned glasssuitable for ceiling (surface/suspended) mount of beam light 12 watt for commercial applications 100 lumen/watt efficacy efficient heat sink (die cast) with steel clips integrated driver control on surface complete all as specified and as directed by Engnr-In-Charge. Make Legrand/Obbo/Honeywell

S&F Wall fan, made of sturdy Engineering plastic, voltage 230V, 50 Hz, RPM 1350 Copper winding of sweep 400 mm including connection as required at site. Make -Bajaj/Crompton/Havells

Supply and fix single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amp, 240 volts complete all as specified and directed. Make: L&T/Legrand/ABB/Seimens

S & F in repair 3 pole power contactor with coil voltage 230 volt AC of current carrying capacity 32 to 40 Amps complete including control wiring thimbles etc complete all as directed. Make: L&T/Legrand/ABB/Seimens

Taking down old unserviceable flood light fittings from any height and Supply & fixing LED flood light fittings comprising of epoxy powder coated housing, enclosed with glass cover in frame,(with total lumen output not less than 6000 lumens and suitable wattage for efficiency not less than 100 lumens/Watt) min wattage 60 watt, with ingress protection IP 65/66 and SPD of capacity 10 KV etc incl necessary clamps etc complete and testing on completion all as specified and as directed. Make:Bajaj/Havells/Crompton/Wipro

S&F LED Flexible strip single colour 15W/Mtr professional LED Strip IP65, 240 Volt, PF-0.8 including fixing on wall/pole complete all as specified and directed. Make -Bajaj/Halonix/Havells

S&F LED Flexible strip multi colour 15W/Mtr professional LED Strip IP65, 240 Volt, PF-0.8 including fixing on wall/pole complete all as specified and directed. Make -Bajaj/Halonix/Havells

S&F LED Driver for above strip 75 W LED Strip driver IP 65 complete all as specified and directed. Make -Bajaj/Halonix/Havells

Supply and installation of Smart three Phase Meter with the following specifications: (i) AC Single phase Two Wire, Tamper Proof, Static Meter of Class 1.0, 415 V, 50 Hz, 10 A-60 A conforming to IS-16444 and relevant IEC standards with suitable CTS with inbuilt 865-867 MHZ radio frequency communication facility with self healing Mesh network with default and on demand display. biling date generation facility, anti-tamper features. Microprocessor and LED/LCD based circuitry. (ii) Meter should support the following data 30 min instaneous data for voltage, current, power factor, power, cumulative energy and frequency. 30 load survey date for energy, mopntly biling survey for cumulative energy and max demand. (iii) Meter should have connect/disconnect functionality operable from prepaid biling software (iv) The meter should support open communication protocol DLMS with the software. Make: Secure, L&T, Schneider and HPL, Elmeasure. Note: (a) The contractor would be responsible from removing the existing meter, noting down the reading and depositing it with the MES. (b) It would be possible to run the meter in both prepaid and postpaid mode. (c) The meters would carry 5 year warranty. Make : L&T, Schneider, Secure

NOEL ENGINEERS

SHREE JAGDISH FURNITURE CO.

Darpan Construction

Shree Ayyappa Engineering

OM SAI POWER SYSTEMS