COMPREHENSIVE MAINT AND CERTAIN B/R WORKS OF OFFICERS MD ACCN AT LICHUBARI UNDER GE JORHAT

Amount

NOTES :The bidders/contractors are advised to read tender document & all corrigendum/ amendments and General conditions of contracts before entry/quoting the rates.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to stores and rubbish off the MOD premises complete all as specified and as directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement sand mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles of any description or any position etc complete all as specified and as directed.

Demolition of cement concrete ( un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing debris to a distance n.exc. 50 m etc complete all as specified and as directed.

Taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frame) of area not exceeding 1.50 Sqm each including all building hardwares etc complete all as specified and as directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frame) of area exceeding 1.50 Sqm but n.exc 4 sqm each including all building hardwares etc complete all as specified and as directed.

Taking down shutter of any description not exceeding 1sqm each and removing from site of work complete all as specified and as directed.

Taking down shutter of any description area exceeding 1 sqm but not exceeding 2 sqm each and removing from site of work complete all as specified and as directed.

Dismantling of PVC pipe of any description complete all as specified and as directed.

Dismantling of wall and ceiling boards ( fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness including cover fillets and removing unserviceable materials from site of work complete all as specified and directed.

Taking up or down steel tubing and connections, 15mm bore and removal of unserviceable pipe from site of work complete all directed.

Taking up or down steel tubing and connections, 20mm bore and removal of unserviceable pipe from site of work complete all directed.

Dismantling of wrought iron or mild steel work any description and fixed in any position complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, any thickness, including Nainital or similar pattern roof coverings complete all as directed.

Dismantling of old decayed timber scantling 40 Sqcm and over in section in any position in unframed work and removing materials from site of work complete all as directed

Material and labour for 2nd class hardwood timber clean sawn, well seasoned , free from knots, fixed as in scantlings, purlins, trusses complete all as specified and directed

Material & Labour Non skid ceramic tiles, coloured, 7 to 8 mm thick (square/rectangular area of each tile not exceeding 0.11Sqm in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed layer in CM (1:4) complete all as specified and as directed.

Material & Labour Glazed ceramic tiles 300x 200 x 7 mm(Coloured) on vertical surfaces such as skirting, dados and riser to steps etc. set and jointed in neat cement slurry and pointed in coloured cement to match complete over 10mm thick screed bed vertical layer in CM (1:4)all as specified and as directed.

M&L for vitrified ceramic tiles 10 mm thick square / rectangular shape, area of each tiles not excedding 0.36 sqm in floor set and jointed in neat cement slurry and pointed in cement mixed with colour pigment to match over 15 mm thick screed bed or bedding layer in cement mortar(1:4) as in floors for receiving tiles complete all as specified and as directed.

M&L for vitrified ceramic tiles 10 mm thick square / rectangular shape, area of each tiles not excedding 0.36 sqm in floor set and jointed in neat cement slurry and pointed in cement mixed with colour pigment to match over 10 mm thick screed bed or bedding layer in cement mortar(1:3) as in vertical surfaces for receiving tiles complete all as specified and as directed.

S&F 18-20 mm thick Granite of any type work table rubbed and polished in steps, jambs,pillars,cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15 mm thick screed bed in cement mortar (1:6) etc complete all as specifed and as directed.

Material and labour for pre-polished chequered Cement Concrete tiles of size 20 x 20 x 25 mm thick , double layer machine pressed set ( as per IS 1237-2012), jointed and pointed in neat cement slurry in floors and cut & polished in white or coloured cement to match over and including 15mm thick screed bed in cement sand mortar (1:6) complete all as specified and as directed.

Material and labour for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand all as directed and specified by Engr-in Charge

S&F corner glass shelf assembly consisting of 5.5mm thick sheet glass with CP bracket guard & railing 60cm long complete all as specified & directed. Make:- Jaguar cat part No ACN-1173 or equivalent and approved.

Material and labour for post constructional antitermite treatment of soil under existing floors using emulsion @ one liter per hole, 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 to match the existing floors complete all as specified & directed

Material and labour for providing and injecting chemical emulsion for post constructional antitermite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 liters per linear meter including drilling and plugging holes etc in apron complete all as specified and directed

Material and labour for providing and injecting chemical emulsion for post constructional antitermite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed.

M&L for Brickwork with subclass ‘B’ bricks, old size ,straight or curved on plan exc 6m mean radius built in cement sand mortar 1:6 etc complete all as specified and as directed.

M&L for Brickwork with subclass ‘B’ bricks, old size ,straight or curved on plan to any radius in half brick thick wall, built in cement sand mortar 1:4 etc complete all as specified and as directed.

Material and labour for Plain cement concrete M-7.5 (using 40 mm graded stone aggregate) as in foundation, filling amd mass concrete complete all as specified and as directed.

Material and labour for 75 mm thick Plain cement concrete M-7.5 (using 40 mm graded stone aggregate) as in sub base complete all as specified and as directed.

Material and labour for providing 50 mm thick plain cement concrete M-15 using 20mm graded aggregate as in pavings/path surfaces fair and even without using extra cement and spike rolling to surfaces or making impression of expanded metal, whilst the concrete is green surface complete all as specfied and directed

Material and labour for 75 mm thick plain cement concrete M-10(Nominal Mix) using 40 mm graded stone aggregate as in plinth protection, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for providing 25 mm thick pre-cast cement concrete louvers or RCC Jali made out of plain cement concrete M-15 using 12.5 mm graded stone aggregate and set in cement mortar 1:4 including all mouldings etc. complete all as specified and directed.

M&L for Rendering 15 mm in Cement Mortar 1:6 on fair faces of brick work or concrete surfaces finished even smooth without using extra cement to the plastered surface complete all as specified and as directed.

M&L for Rendering 5 mm in Cement Mortar 1:3 on fair faces of on concrete surface ceiling finished even smooth without using extra cement to the plastered surface complete all as specified and as directed.

Material and labour for Rendering 5mm thick cement plaster in Cement sand Mortar (1:4) mixed with water proofing liquid compound @ 3% of cement used or as per manufacturer's instruction over and including 10 mm thick cement plaster (1:4) ,on fair faces of brick or concrete surface of wall and finished even and smooth without using extra cement etc complete all as specifed and as directed. Note:- Water proofing compound shall be measure and paid separately

Supply only integral water proofing compound ISI marked etc complete all as specified and directed.

S&F Well seasoned IInd class hard wood plain, solid, straight chowkat and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S&F Flush shutters, 30 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35 mm thick IInd class hardwood, Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F 30 mm thick IInd class hardwood, Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

M & L for 18/19 mm thick MDF board, commercial type fixed with screws to timber framework as in linings, panelling similar location cupboard shutter, shelf, kitchen cabinets etc.complete all as specified and directed.

S&F mild steel flat iron 25 x 3 mm as in band, straps, hold fasts etc and similar small articles conforming to Fe-410-0 or Fe-310-0 complete all as specified and as directed.

S&F Anodised aluminium frame powder coated ( Minimum thickness of powder coating 50 micron) for door,window and ventilator with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F Anodised aluminium powder coated of any color,door shutters,aluminium sec weighing 0.55 Kg/m including necessary joining cleat,glazing clips,rubber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminium snap beading screws etc.complete all as per relevant TD Drg , specified and directed.

S&F Anodised aluminium powder coated of any color window and ventilator shutter fixed type/sliding type without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats,glazing clips,rubber packing,anodised aluminium snap beading,screws etc complete all as per relevant TD Drg, specified and as directed.

S&F anodised aluminium grill 10 mm thick powder coated as per section 7733 of Hindalco including rubber packing, and fixing cleats etc complete all as specified and as directed

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed

S&F Mortice lock, vertical type, size 100mm 4 Liver of brass complete all as specified and directed

S&F Steel windows with side hung shutters fixed on box type MS frame including box type hinges with steel handle, and steel peg stay, etc complete with glazing bars, guard bars , dovetailed or welded complete all as specified and directed.

S&F Steel windows with side hung shutters fixed on box type MS frame including box type hinges with steel handle, and steel peg stay, guard bar etc complete without glazing bars, dovetailed or welded complete all as specified and directed.

Material and labour for Solid PVC door frame of size 50mm x 47 mm made out of 5 mm wood grain printed PVC sheet reinforced with Mild Steel square tube, suppling & fixing in opening as per drawing complete all as specified and directed.

Material and labour for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawingcomplete all as specified and directed.

S&F 100 mm size butt hinges "medium weight" cold rolled mild steel complete all as specified and directed.

S&F 75 mm long butt hinges, "medium weight" cold rolled mild steel complete all as specified and directed.

S&F 50 mm long butt hinges, medium weight, and cold rolled mild steel complete all as specified and directed.

S&F 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 100 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 150 mm extruded aluminum alloy handles, fabricated type, anodized complete all as specified and as directed.

S&F 100 mm extruded aluminum alloy handles, fabricated type, anodized complete all as specified and as directed.

S&F 300 mm long aluminum alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of steel, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy complete all as specified and as directed.

S&F 150 mm long aluminum alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of steel, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy complete all as specified and as directed.

S&F 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S & F of 40 mm wide flap when open, brass bright finish continuous (Piano) hinge complete all as specified and directed.

M&L for stainless steel magnetic hinges 19 mm long L type suitable for modular kitchen cabinet shutters complete all as per specified and directed.

M&L for stainless steel sliding channels suitable for modular kitchen cabinet drawers/racks complete all as per specified and directed.

M&L for 3 mm dia IS marked stainless steel cup plate rack of size 4" x 17" x 20" complete all as per specified and directed.

M&L for 3 mm dia IS marked stainless steel meals plate rack of size 6" x 17" x 20" complete all as per specified and directed.

M&L for 3 mm dia IS marked stainless steel catlery basket of size 4" x 17" x 20" complete all as per specified and directed.

M&L for 3 mm dia IS marked stainless steel bottle basket of size 8" x 17" x 20" complete all as per specified and directed.

Supply and fix 3mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.50sqm in each pane complete all as directed.

S&F 3.0 mm thick figured glass, pin head type glazing with oil putty in squares not exc. 0.50sqm in each pane complete all as specified and as directed.

S&F Sheet glass 5.5mm thick, ordinary quality & glazing with oil putty in square exc 0.5 sq.m in each pane including hacking out old broken glass (any thicknesss, size,quality or description) from metal frame inlcuding punching or drilling out old glazing pins/spring clips & providing & fixing new ones all as directed.

S & F stainless steel wire cloth, 0.36mm nominal dia. of wire and average width of aperture 1.40mm fixed with tinned tacks, or stainless steel wire staples including all cuttings, wastage, etc complete all as specified and directed.

S & F stainless steel wire cloth in repair, 0.36mm nominal dia. of wire and average width of aperture 1.40mm fixed with tinned tacks, or stainless steel wire staples including all cuttings, wastage, etc complete all as specified and directed.

Supply & Fixed in repair sheet glass 3.0 mm thick ordinary quality and glazing with oil putty in squares not exc. 0.50 sqm in each pane fixed with wooden beads (painted with two coats of synthetic enamel paint over a coat of primer of reqd tint) or glazing clips with oil putty complete all as specified and as directed.

Supply & Fixed in repair figured glass, pin head type 3.0 mm thick ordinary quality and glazing with oil putty in squares not exc. 0.50 sqm in each pane fixed with wooden beads (painted with two coats of synthetic enamel paint over a coat of primer of reqd tint) or glazing clips with oil putty complete all as specified and as directed.

S&F in repair 100 mm size butt hinges "medium weight" cold rolled mild steel complete all as specified and directed.

S&F in repair 75 mm long butt hinges, "medium weight" cold rolled mild steel complete all as specified and directed.

S&F in repair 50 mm long butt hinges, medium weight, and cold rolled mild steel complete all as specified and directed.

S&F in repair 200 mm long aluminium anodized barrel tower bolts of extruded section and fixed complete all as directed.

S&F in repair 100 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as directed.

S&F in repair 150 mm long aluminium handles cast type, anodised complete all as directed.

S&F in repair 100 mm long aluminium handles, cast type, anodised complete all as directed.

S&F in repair 300 mm long aluminum alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of steel, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy complete all as specified and as directed.

Supply and fixed in repair mild steel chromium plated aluminium anodized tubular curtain rails, 20mm dia, complete all as specified and as directed.

Supply and fixed in repair mild steel chromium plated aluminium anodized curtain brackets , 20mm dia, with fixing brackets, stops, rollers etc. complete all as specified and as directed.

M & L for PVC (SWR) Floor trap of 75 mm outlet plain with grating including jointing with solvent cement complete all as specified and directed.

M & L for PVC (SWR) multi Floor trap of 75 mm outlet with grating including jointing with solvent cement complete all as specified and directed.

M & L for PVC (SWR) gully trap of 125/ 110 mm setting and jointing with solvent cement complete all as specified and directed.

S&F UPVC soil or waste pipe 110 mm bore single socket in any length type 'B' with rubber ring joints laid in trenches or floor / wall complete all as specified and directed.

S&F UPVC soil or waste pipe 75 mm bore single socket in any length type 'B' with rubber ring joints laid in trenches or floor / wall complete all as specified and directed.

S&F UPVC (SWR) bend in any radius 110 mm dia bore with access dore complete all as specified and directed.

S&F UPVC (SWR) bend in any radius 75 mm dia bore with access dore complete all as specified and directed.

S&F UPVC (SWR) branch pipe (single Y) equal or unequal 110 mm dia bore with access dore complete all as specified and directed.

S&F UPVC (SWR) branch pipe (single Y) equal or unequal 75 mm dia bore with access dore complete all as specified and directed.

S&F UPVC (SWR) junction single (single T) equal or unequal 110 mm dia bore with access dore complete all as specified and directed.

S&F UPVC (SWR) junction single (single T) equal or unequal 75 mm dia bore with access dore complete all as specified and directed.

S&F Anodised aluminium snap grid (with T sec 24x38x0.7mm, wall cleat 25x25x3.5mm) frame work of size 605x605mm with hangers 4mm dia GI wire adusting label fixed to roof trusses by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fastener 12.5mm dia, 40mm long complete all as specified and as directed.

S&F 10mm thick plaster of paris ceiling board (Gypsum anhydrous) to flat surface over IIndclass soft wood fillets & reinforced with G.I. wire mesh (Fillets & G.I. wire mesh paid separately) etc complete all as specified and as directed.

S&F 4mm thick high pressure steam cured non asbestos fibre cement designer board as per IS 14862 with applying of two coats of acrylic distemper over a coat of primer complete all as specified and directed.

Supply and fix 15mm bore galvanized steel tubing "medium grade" with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and as directed.

Supply and fix 20mm bore galvanized steel tubing "medium grade" with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunsheds, shelves, lintel etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. complete all as directed.

S & F of steel work as in tubular trusses including special shaped washers etc. complete using ERW or induction butt welded tubes conforming to IS – 1161 – 1979 grade St – 240 complete all as specified and directed.

Supply and fixing of pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick and an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Supply and fixing of pre-painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in ridges, tips, valley, gutters, length & girth as fixed with nail or screws complete all as specified and as directed.

S & F in repair of 15 mm bore bib taps, cast copper alloy fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repair of 15 mm bore pillar taps, cast copper alloy, fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'HOT' or 'COLD’ with long screwed shanks and fly-nuts, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repair of 15 mm bore stop valves, cast copper alloy, fancy type screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F in repair of 15 mm bore stop valves, cast copper alloy, fancy type chromium plated with long shank and cup (concealed type) screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F in repair of 15 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S & F in repair of 20 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S & F 125mm size brass chromium plated shower rose with or without swivel joints with arm, fixed to steel pipe or union of 15mm bore fixed as in repairs complete all as specified and as directed.

S& F in repair chromium plated hand shower (health faucet) completed all as directed.

S&F in repair chromium plated soap dish complete all as specified and directed.

S&F in repair chromium plated towel rail 600mm long complete all as specified and directed.

S&F corner shelf PTMT (Set of Three) fixed on walls with wooden plugs with chromium plated brass screws and cup washers complete all as directed.

S&F glass shelf 600 mm long and 150mm wide with side railing fixed to walls with wooden plugs with chromium plated brass screws and cup washers complete all as directed.

S&F in repair Sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915 mm x 460 mm and bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

Supply and fixed in repair vitreous china wash down water closet pan (Pedestal pattern), white, including fixing bolts nut & plastic water closet seat back excld flushing cistern and flush pipe, including taking down unserviceable water closet pan complete all as specified and directed.

S&F in repair vitreous chaina squating pan orissa pattern size 580X 440mm white with intregal foot rest complete including lime concrete (excluding flushing cistern and flush pipe) but connecting to flushing pipe, anti-symphonage pipe etc. complete all as specified and directed.

S&F in repair 10 ltr capacity PVC valveless syphone action dual type (5/10 Ltrs), flushing cistern, low level, white with inlet, ball valve float and handle incl brackets with PVC high flush pipe complete all as specified and directed.

S&F in repair vitreous chaina wash hand basin 550X 400mm (flat ball type) any size including cutting for and pinning in ends of brackets including waste coupling, waste water pipe complete all as specified and directed.

S&F in repairs plastic water closet seat cover, white / black, with mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S & F in repairs 32mm waste coupling for kitchen sink including waste pipe fixed complete all as specified and as directed.

S & F for 15mm size PVC connection pipe with PTMT nut of length 450mm complete all as specified and directed.

S&F in repair 500 ltrs rotational moulded polythytene water storage tanks , double layered (cylindrical vertical with closed top) hoisted and fixed in position as specified in SSR Part I including 20 mm ball brass valves high pressure with polythene float and nut complete including dismantling of old one all as specified and as directed.

S&F in repair 1000 ltrs rotational moulded polythytene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position as specified in SSR Part I including 20 mm ball brass valves high pressure with polythene float and nut complete including dismantling of old one all as specified and as directed.

S & F in repair of 20 mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gram) complete all as specified and directed.

S & F in repair of 15 mm size bib tap standard fancy type of PTMT, any colour high pressure screwed for iron pipes (minimum weight 90 gram) complete all as specified and directed.

S & F of 15 mm size pillar tap fancy type of PTMT, any colour high pressure screwed for iron pipes (minimum weight 120 gram) complete all as specified and directed.

S & F of 15 mm size stop valve of PTMT, any colour high pressure screwed for iron pipes (minimum weight 90 gram) complete all as specified and directed.

Supply and Fix, in repair of 15 mm bore brass chromium plated basin Mixer for mixing HOT & COLD water screwed down for iron pipe or for brass ferrule complete all as specified and directed. Make Jaquar or equivalent of Kohler/Marc.

S&F in repairs 15 mm dia CP fancy wall mixer with L Bend (incl provision of O/H shower & hand shower) for mixing hot & cold water screwed down for iron pipe and fixed as in repairs complete with hand shower HSH-1717 and tube. (Make Cat No QQT-7281 of Jaquar or equivalent of Kohler/Marc.

M&L for preparation of new or previously un-treated wood and wood base surfaces of any description, not otherwise described exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M & L for preparation of old decorated surfaces of walls, finishing walls with textured exterior paint of required shade : two coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm and applying plaster of paris putty of 1 mm thickness to prepare the surface even and smooth complete all as specified and as directed by Engineer in charge.

Material and labour for preparation of new or previously un-treated wood and wood base surfaces of any description, not otherwise described nexc 10cmwidth or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old surfaces of wall and one coat of cement base paint complete all as specified and directed.

M&L for preparation of old surfaces of wall with complete removal of existing treatment and two coat of cement base paint complete all as specified and directed.

M&L for preparation of new or previously un-treated steel surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for preparing surfaces of wood and wood based materials new or old of any description and girth not otherwise described and treated with two coats of french polish complete all as specified and directed.

M & L for applying two coats of acrylic distemper with roller over one coat of primer over 1mm thick wall care putty to new plastered wall surfaces inluding preparation of surfaces complete all as specified and as directed.

M & L for applying two coats of acrylic distemper with roller over one coat of primer over 1mm thick wall care putty to new plastered ceiling surfaces inluding preparation of surfaces complete all as specified

M & L for preparation of new or previously untreated wall surfaces & applying two coats of acrylic base weather shield paint (1st quality) over one coat of exterior grade primer including preperation of surfaces complete all as specified & directed.

M&L for applying one coat of white washing after preparation of old decorated plastered or unplastered surfaces of as on ceiling complete all as directed.

M&L for preparation of old distempered surfaces of wall including cornices, pilasters and other wall features etc by washing, rubbing down and stopping and applying one coat of acrylic washable destemper with roller on the same complete all as specified and as directed.

M&L for preparation of old distempered surfaces of ceiling by washing, rubbing down and stopping and applying one coat of acrylic washable destemper with roller on the same complete all as specified and as directed.

M&L for preparation of old painted wooden surfaces of any description, not otherwise described for, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

M&L for preparation of old painted steel surfaces of any description over 10cm width or girth, not otherwise described for and applying one coat of synthetic enamel paint complete all as specified and directed.

S&F in repair 18/19 mm thick PVC board one side laminated cut to size as required and fixed in position for cabinets etc complete as directed by Engr-inCharge.

Supply and fix vitreous china wash down water closet pan (casement pattern), white, including fixing bolts nut & plastic water closet seat back including taking down unserviceable water closet pan complete all as specified and as directed.

S&F Tolilet paper holder, with stainless steel flap complete all as specified and as directed.

S & F in repair of 15 mm two way bib taps, cast copper alloy fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

Note: Schedule of credit (SCHEDULE OF CREDIT) amount of Rs ₹ ___________ mentioned on Page No ____ shall be deducted from the total quoted amount of BOQ.

M/S DILIP GOSWAMI (BID ID -3063464)

SUBHAS CONSTRUCTIONS (BID ID -3061379)

KAY CEE CO. INDIA (BID ID -3062048)

A M CHOUDHURY AND CO (BID ID -3063213)