Loading
Loading…
New
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.5 LAccepted-AOC | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹25.0 L+₹7,935 (0.32%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹26.5 L+₹1.6 L (6.46%)Rejected-Finance 205L MODEL TOWN LUDHIANA | LUDHIANA | LUDHIANA | PUNJAB | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹26.7 L+₹1.8 L (7.10%)Rejected-Finance | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹28.6 L+₹3.7 L (14.8%)Rejected-Finance | L5 | Rejected-Finance Other than lowest |
| Sl No | Description | Qty | Unit | SahaDevSingh Constructions L6 | M/s S. K. Construction Co. L3 | Attar Singh and Sons L9 | TRIVENI ASSOCIATES L8 | M/S KAMAKHYA CONTRACTORS L7 | M/S MRITUNJAI SHARMA L5 | M/S RADHEY GOVIND ENTERPRISES L4 | M/S APOORVA CONSTRUCTION L1 | saroj constructions L2 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Dismantling/ demolition of polymeric water proofing membrane single layer with and including plaster, PCC, Padding, brick coba etc on roofs complete including removal of material and debris away from the site etc complete all as specified and directed. | 200 | Sqm | 60 ₹12,000 | 52 ₹10,400 | 41 ₹8,200 | 50 ₹10,000 | 200 ₹40,000 | 150 ₹30,000 | 50 ₹10,000 | 100 ₹20,000 | 35 ₹7,000 Lowest |
| 2.00 | M&L for Remove loose and damaged concrete roof screed in pockets with mechanical cutter. Clean the concrete screed with high pressure water jet to remove dirt and loose particles. Brush apply a bond coat of Pidicrete URP mix in the ratio of 1:1 (URP 1: Cement 1) by volume to make it lump free slurry when applied on in the pre wet surface complete all as specified and directed. | 200 | Sqm | 90 ₹18,000 | 160 ₹32,000 | 151 ₹30,200 | 200 ₹40,000 | 150 ₹30,000 | 800 ₹1,60,000 | 90 ₹18,000 | 100 ₹20,000 | 35 ₹7,000 Lowest |
| 3.00 | M&L for Laid to fall roof screed in correct slope and gradient. Mix Dr. Fixit Pidicrete URP 10% by weight of cement in (M20) concrete in ratio of 1:1.5:3 i.e., one bag of 50kg cements: 1.5 times volume of sand: 3 times volume of aggregates: 25L water. Level the repair mortar and finish with trowel. Moist cure should be done for 7days. Air cure screed for 7days, before application of roof top coat coating system etc complete all as specified & directed. | 200 | Sqm | 120 ₹24,000 | 290 ₹58,000 | 351 ₹70,200 | 1,000 ₹2,00,000 | 600 ₹1,20,000 | 700 ₹1,40,000 | 100 ₹20,000 Lowest | 300 ₹60,000 | 120 ₹24,000 |
| 4.00 | Apply one coat of Cipoxy 16D primer in the ratio 1:1 spreading at the rate of 0.200 kg-0.250 kg /sqm in complete dry condition where moisture contain below 7% (should be checked with moisture meter)Allow the primer coat to dry for 6 to 8 hours. Apply 1st coat of Roofseal Classic without dilution spreading at the rate of 0.70/litre/Sq.mt/Coat until all surface is covered. Lay a 45 GSM Fibre glass mesh as a reinforcing material which is incorporated in the coating when the first coat is still in wet condition. Allow the first coat to dry for approximately 4 to 6 hours. Apply the second of chemical with the same application coverage, but in a direction perpendicular to that of the first and second coats. Allow each coat to air cure for a minimum of 4-6 hours after application. Check to see no void surface is left untreated / uncoated.Allow the system to air cure for 7 days minimum etc complete all as specified & directed. | 200 | Sqm | 850 ₹1,70,000 | 500 ₹1,00,000 | 650 ₹1,30,000 | 350 ₹70,000 | 650 ₹1,30,000 | 650 ₹1,30,000 | 900 ₹1,80,000 | 500 ₹1,00,000 | 150 ₹30,000 Lowest |
| 5.00 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar ficings, dressed stone work and pre-cast concrete articles complete all as specified and directed. | 3 | Cum | 350 ₹1,050 | 600 ₹1,800 | 641 ₹1,923 | 350 ₹1,050 | 2,000 ₹6,000 | 3,500 ₹10,500 | 500 ₹1,500 | 100 ₹300 Lowest | 300 ₹900 |
| 6.00 | M&L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in CM 1:6 complete all as specified & directed | 3 | Cum | 5,200 ₹15,600 | 6,000 ₹18,000 | 4,878 ₹14,634 | 4,500 ₹13,500 | 6,500 ₹19,500 | 4,200 ₹12,600 | 4,000 ₹12,000 Lowest | 4,000 ₹12,000 Lowest | 8,000 ₹24,000 |
| 7.00 | Taking down cement or cement lime plaster of any discription on brick or stone walls/ ceilings etc, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. | 550 | Sqm | 25 ₹13,750 Lowest | 46 ₹25,300 | 95 ₹52,250 | 250 ₹1,37,500 | 100 ₹55,000 | 200 ₹1,10,000 | 30 ₹16,500 | 30 ₹16,500 | 25 ₹13,750 Lowest |
| 8.00 | M&L for 10 to 12 mm smart care ready mix repair plaster is a specially designed ready to use cement-based plaster with high quality polymer additives and well graded sand and fillers wihich can be used for plastering (as per manufacturer instructions) over exterior wall surface complete all as specified and directed | 300 | Sqm | 580 ₹1,74,000 | 500 ₹1,50,000 | 48 ₹14,400 Lowest | 250 ₹75,000 | 450 ₹1,35,000 | 250 ₹75,000 | 400 ₹1,20,000 | 450 ₹1,35,000 | 550 ₹1,65,000 |
| 9.00 | Material & Labour for preparing newly plastered surfaces of wall, applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm including putty over new surface of wall complete all as specified and directed. | 300 | Sqm | 85 ₹25,500 Lowest | 140 ₹42,000 | 265 ₹79,500 | 100 ₹30,000 | 150 ₹45,000 | 280 ₹84,000 | 150 ₹45,000 | 110 ₹33,000 | 160 ₹48,000 |
| 10.00 | M&L for 10 to 12 mm thick smart care ready mix repair plaster with high quality ploymer additives and well graded sand and fillers which can be used for plastering (as per manufacturer instructions) over interior surface of wall complete all as specified and directed | 150 | Sqm | 580 ₹87,000 | 550 ₹82,500 | 140 ₹21,000 Lowest | 250 ₹37,500 | 400 ₹60,000 | 250 ₹37,500 | 500 ₹75,000 | 450 ₹67,500 | 450 ₹67,500 |
Tender Value
Refer Docs
EMD Value
₹50,000
Closing Date
12 Aug 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Maj Dinoop Kumar
GE (W) Agra
COMPREHENSIVE MAINT OF CWE OFFICE COMPLEX AND GE OFFICE UNDER GE (WEST) AGRA
2025_MES_722373_1
8012/1110/E8
Open Tender
Civil Works
Item Rate
180 days
GE (West) Agra
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Yes
GE (West) Agra
₹50,000
16 Oct 2025
24 Jul 2025
19 Aug 2025
24 Jul 2025
12 Aug 2025
6 Aug 2025
Amount
Dismantling/ demolition of polymeric water proofing membrane single layer with and including plaster, PCC, Padding, brick coba etc on roofs complete including removal of material and debris away from the site etc complete all as specified and directed.
M&L for Remove loose and damaged concrete roof screed in pockets with mechanical cutter. Clean the concrete screed with high pressure water jet to remove dirt and loose particles. Brush apply a bond coat of Pidicrete URP mix in the ratio of 1:1 (URP 1: Cement 1) by volume to make it lump free slurry when applied on in the pre wet surface complete all as specified and directed.
M&L for Laid to fall roof screed in correct slope and gradient. Mix Dr. Fixit Pidicrete URP 10% by weight of cement in (M20) concrete in ratio of 1:1.5:3 i.e., one bag of 50kg cements: 1.5 times volume of sand: 3 times volume of aggregates: 25L water. Level the repair mortar and finish with trowel. Moist cure should be done for 7days. Air cure screed for 7days, before application of roof top coat coating system etc complete all as specified & directed.
Apply one coat of Cipoxy 16D primer in the ratio 1:1 spreading at the rate of 0.200 kg-0.250 kg /sqm in complete dry condition where moisture contain below 7% (should be checked with moisture meter)Allow the primer coat to dry for 6 to 8 hours. Apply 1st coat of Roofseal Classic without dilution spreading at the rate of 0.70/litre/Sq.mt/Coat until all surface is covered. Lay a 45 GSM Fibre glass mesh as a reinforcing material which is incorporated in the coating when the first coat is still in wet condition. Allow the first coat to dry for approximately 4 to 6 hours. Apply the second of chemical with the same application coverage, but in a direction perpendicular to that of the first and second coats. Allow each coat to air cure for a minimum of 4-6 hours after application. Check to see no void surface is left untreated / uncoated.Allow the system to air cure for 7 days minimum etc complete all as specified & directed.
Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar ficings, dressed stone work and pre-cast concrete articles complete all as specified and directed.
M&L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in CM 1:6 complete all as specified & directed
Taking down cement or cement lime plaster of any discription on brick or stone walls/ ceilings etc, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for 10 to 12 mm smart care ready mix repair plaster is a specially designed ready to use cement-based plaster with high quality polymer additives and well graded sand and fillers wihich can be used for plastering (as per manufacturer instructions) over exterior wall surface complete all as specified and directed
Material & Labour for preparing newly plastered surfaces of wall, applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm including putty over new surface of wall complete all as specified and directed.
M&L for 10 to 12 mm thick smart care ready mix repair plaster with high quality ploymer additives and well graded sand and fillers which can be used for plastering (as per manufacturer instructions) over interior surface of wall complete all as specified and directed
Preparing newly plastered surfaces of walls and applying two coats of oil bound distemper over 3mm thick wall care putty on wall complete all as specified and directed.
M&L for complete removal of extg treatment of old plastered surfaces of wall and applying two coat of oil bound distemper with roller on old decorated wall surfaces over 3 mm thick white putty complete all as specified and directed.
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm including putty complete removal of existing treatment old wall surface complete all as specified and directed.
M & L for Preparing old plastered surface to prepare the surface even and smooth and two coat of white wash on ceiling complete all as specified and directed.
Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified (Paymentfor providing grooves shall be made separately).
Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge
M&L for applying polymer modified primer on steel reinforcements which is a blend of portland cements, graded filters, corrosion inhibiting additive and re-dispersible polymers in powder form that when fixed with water forms slurry for application by brush to cover exposed reinforcement. The product shal achieve an adhesion bound strength of 1 Mpa to steel. It has got a pot life of 30 minutes @ 300 C. the touch dry time shall be 10-15 minutes @ 300 C. The mixed density shall be 2.01 - 2.05. The water / powder ratio by weight shall be 0.3. It shall achieve coverage of 2 kg / sqm @ 1.0 mm thickness, applying on visible reinforcement surface to from a continuous film not less than 1 mm thick complete all as specified and directed
M& L for Providing and fixing on ceiling /wall /column by duly welding MS wire mesh weighting not less than 1kg/sqm before fixing ,surface should be cleaned and should not be free from dirt ,oil grease etc complete all as specified and directed.
M&L for external plastering of brick / concrete surface of wall using fiber reinforced polymer modified repair mortar. The product shall be a single component thixotropic fiber reinforced polymer modified repair mortar needing only addtion of water at site which can be applied by trowel. It is reinforced with specially designed bean shaped, alkali resistant synthetic fibers for exceptional resistance to cracking. It is recommended for repair situations requiring application of mortar upto 18-20 mm thickness in one layer. Cement and sand can be used for finishing the surface including two coat white wash for ceiling/wall etc complete all as specified and directed.
M&L for applying two component amine cured epoxy mastic coating as bonding agent between old and new surface of wall and ceiling surface using light brush blasting using nonmetallic abrasive leaving a clean, rough and even pattern. It should be based on a 100% epoxy formulation and contains no solvents or water diluents. Apply two coats with brush or squeeze to the existing surface, working well into the substrate complete all as specified and directed.
Dismantling asbestos cement (corrugated semi corrugated etc ) sheets in roof covering above 12 to 15 m height complete all as specified and directed.
S&F for pre- painted galvatume aluminum zinc coating GI based corrugated steelsheet 0.50mm thick of and colour having tensilestrength of 550 Mpa as in roof covering/cladding towall, fixed with selftapping screws up to a height of 12 to 15m complete all as specified and directed
S& F for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
Dismantling timber scantlings 40 sq. cm and over in section, in any position
S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment , gusset plates, riveting etc, n exc 10 kg each brackets, conforming to Fe 290 Gd 165.
S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe-290 grade E-165 including for drilling the members for site, Fabrication, fitting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting connections complete all as specified and directed.
Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete , including taking out, cleaning of flase ceiling and handling removing to store or stacking for reuse all as specified and directed.
S&F anodised aluminium/GI snap grid frame work for false ceiling all as specified of grid 605 x 605 including GI hangers of suitable dia and fixed to purlin/rafters as specified.
S&F 4 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and directed.
Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.
S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.
M&L for coloured glazed ceramic tiles (Digital & designer Pattern) in vertical surface 450 x 300 x 7 mm / 300 x 600 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match tiles including 10mm thick rendering in CM 1:3 on brick wall complete all as specified and as directed .
M & L for Vitrified tiles 7 to 8 mm thick light shade (square/rectangular) area of each tile exceeding 0.42 sqm but n exc 1.00sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) complete all as specified & directed.
M&L Granite 16 to 18 mm thick in steps, pillars, window cills, pillars, window cills, cooking platforms and like laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rounding edges of stone slab one edge and including 15mm thick screed bed or bedding layer of cment mortar (1:6) complete all as specified and as directed.
Material & labour Non skid coloured Joint free tiles 7 to 8 mm thick ( square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm ,in floors etc.set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) complete all as specified & directed.
Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in copings, kerbs, benching and the like, including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete.
Taking up or down 15mm bore steel tubing and connection complete all as specified and directed.
Supply and fixing 20 mm bore galvanised tubes medium grade , with all fitting and fixed complete to walls and ceilings,roofs or laid in floors complete all as specified.
Supplying and laying 20 mm outer diameter of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.
Cutting chases for pining in for GI pipe ,codute complete all as specified and directed.
Dismantling Water tanks, open or closed, hoisted and fixed in position complete all as specified and directed.
S&F 500 Ltr Rotational moulded polyethylenewater storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.
S&F 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 20 mm dia (minimum weight - 210 gm) complete all as specified and directed.
S & F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as spd and dir.
S&F in repair PVC connection 15mm size with PTMT nuts, 600 mm long complete all as specified and directed
S&F in repairs Vitreous China wash hand basin white flat back size 550x400mm including cutting for and pinning in ends of brackets or erecting stand , 32 mm dia Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm 45gms/40mm-60 gm) and 32 mm PVC flexible waste pipe 800mm long etc complete all as specified and directed.
S&F in repair 15mm bore, brass chromium plated pillar cock (foam flow) screwed down for pipe and fixed complete all as specified and directed.
S&F in repairs 600x450mm beveled edge moulded looking mirror of 5mm thick glass mirror with double coat for protection and longevity grounded edges for safety and silver plating on the back for better reflection incl washers bolt etc. complete all asevity protection and long specified and directed.
S&F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimumweight 90gms).
S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
S & F in repairs 20 mm bore chromium plated fancy bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S & F in repairsHealth faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.ompleted all as specified and directed.
S&F in repair single piece EWC with UF seat cover himges,fixing accessories set ,cistern fittings, rim less tornado flushiong size 360x680x750 complete all as specified and directed.
Supply and fixed in repair angular valve , 15mm dia, cast copper alloy,CP fancy type with long shank and cup screwd down, high pressure ,screwed both ends for iron pipes or for unions and fixed in pipe all as specified and directed.
S&F in repair 15mm bore, brass chromium plated single lever basin mixer with 300 and 600mm braided connection pipe (without pop up ) for making hot & cold water screwed down for pipe and fixed complete all as specified and directed.
S&F in repair wall mixer with provn for OHS with 115mm long bend pipe side connecting legs and wall flange, fixed in repair for 15 mm bore iron pipe or for brass ferrule fixed in repair complete all as specified and directed.
S & F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall and floor complete all as specified and directed.
S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified & directed.
S & F 110 mm bore PVC (SWR) bends with access door of any radius complete all as specified & directed.
Taking down Chowkhats or frames not exc. 1.5 sq. m but (without taking off shutters from the frames each complete all as specified and directed.
Taking down Chowkhats orframes exc. 1.5 sq. m but n. exe 4 sqm (without taking off shutters from the frames each complete all as specified and directed.
M&L for Factory made WPC (Wood Polymer Composite) Double Rebated frame of solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length and hinges complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made etc complete all as specified and directed.
M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45X85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length and hinges complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madeetc complete all as specified and directed.
S&F powder coated anodized aluminium door & frame with reqd size of aluminium sections weighing 0.55 kg/mincluding 5 mm thick tinted glass coloured in half portion and in other half portion 4 mm thick ACP sheet of any colour complete and fixed with anodized aluminium snap beading, glazing clips, joining clips, screws and 02 Nos of aluminium handle on each door shutter, aluminium anodized tower bolt 200mm long 02 Nos on each shutter and mortice lock device complete with double keys for each lock, 01 No Hydraulic door closer for each shutter complete all as specified and directed with following specifications:- (a) Aluminium door frame = 101.50x44.45mm (b) Aluminium style/top & middle rails of shutter = 83.5x44.45mm (c) Aluminium bottom rail of shutter = 114.50x44.45mm (d) Aluminium door frame with shutters shall be fixed in position in brick wall opening as required according to site conditions including all fastening arrangements etc complete all as specified and directed.
S & F powder coated Anodised aluminium three track sliding window made of extruded profiles with reqd size of aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings and plain glass on two shutters and stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples on one shutters with two nylon roller on each shutters including star lock handle complete all as specified and directed by Engineer-in-charge
S&F aluminium anodised grill (DG 104) 10mm x 5 mm thick on Deco grill or equivalent fixed with 'F' section approved make complete all as specified and directed.
S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc (minimum thickness of powder coating 50 micron) weighing 0.55 Kg/M or frame size as per ground requirement complete all as specified
Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m or as per site requirement including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specifiedcomplete all as specified and directed.
S&F 4 mm thick sheet glass plain/frosted ordinary quality and fixed with aluminum beading and gaskit suitable for aluminum frames in squares not exceeding 0.5 sqm in each pane complete all as specified and directed.
S&F for factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and including fixing with 100mm long stainless steel butt hinges -04Nos with necessary full body threaded star headed counter sunk S.S screws, complete all as per specified and directed.
Supply & fix Glazed or skeleton factory made door shutter, 30 mm thick of Second class hard wood (hollock), open rebated and prepared to receive glass, gauge ( without sash bars) with plain, chamfered or rounded, mitred beads for glass etc , size of members of shutters shall be as specified in SSR Part I, section -8 clause 8.24 (a) complete all as specified & directed.MAKE: Supreme door /century/Kitply
S & F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed
S & F for factory made solid PVC moulded door shutter with wood free EPS 28 to 30mm thick (styles), with 2,4 or 6 raised panel design with 2mm thick 3D wood grain moulded PVC sheet on the front face & 2mm prelam PVC sheet on bach face at site as per specification & drawing complete all as specified and directed.
S& F 150 mm Aluminium handles, cast type,anodised fixed complete all as specified and directed.
S& F 200mm long Aluminium anodised,barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F 300 long Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
M&L for Preparation of New or previously untreatedwood and wood based surface of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of pink primer.
M&L for Preparation of New or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of red oxide.
S & F Framed work such as grills, gratings in windows etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-complete all as specified and directed.
S&F in repair Door closer (aluminium ectruded section)hydraulically regulated, designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in widthand of weight between 61 to 80 kg and fixed complete all as specified and directed.
saroj constructions (BID ID -3389939)
M/s S. K. Construction Co. (BID ID -3390673)
M/S RADHEY GOVIND ENTERPRISES (BID ID -3387372)
M/S MRITUNJAI SHARMA (BID ID -3387175)
SahaDevSingh Constructions (BID ID -3388813)
M/S KAMAKHYA CONTRACTORS (BID ID -3390335)
TRIVENI ASSOCIATES (BID ID -3389405)
Attar Singh and Sons (BID ID -3391283)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .