ADDITION/ ALTERATION AND IMPROVEMENTS TO MOVEMENT CONTROL OFFICE (T-07A, T-07B), T-09/01 (DRIVER REST ROOM, FITTER ROOM, WATER TANK STAGE) AND T-09 (WASHING PLATFORM) AND CERTAIN B/R WORKS IN MT POOL AREA AT INS MANDOVI UNDER GE (P) NAVY MANDOVI

Amount

B/R WORKS

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/ disintegrated rock complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/ disintegrated rock complete all as specified and directed.

Removing excavated material to a distance n.exc 50m, and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

Removing excavated material to a distance exc 250m and n exc. 500 m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

M & L for cement concrete 1:3:6 type C2 using 40mm graded aggregate as in foundations, filling and mass concrete complete all as specified and directed.

M & L for pre-cast cement concrete block masony with solid blocks of precast cement concrete 1:3:6 type C1 (using 20 mm graded stone aggregate), exc 10cm in width and set in cement mortar 1:6 complete all as specified and directed.

M & L for rendering 10 mm thick in cement mortar 1:4 on fair faces of brick work or concrete wall surfaces and surface finished even and smooth without using extra cement complete all as specified and directed.

M & L for providing cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) in lintels upto 1.5m clear span, cills, plinth courses, string courses, parapets and railings upto 60 cm in height, copings, kneelers, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

M & L for preparation of newly plastered wall surfaces and applying two coats of white wash complete all as specified and directed.

Taking down cement or cement lime plaster, any description on stone/ PCC block/ brick wall or top of chajja including raking out joints, hacking for key, scrubbing down with water etc and removal of debris to outside of INS Mandovi area including filling of open joints in cement mortar 1:6 complete all as specified and directed.

M & L for rendering 15 mm thick in two layers in cement mortar 1:3, 10 mm thick first layer and 5 mm thick outer layer mixed with WPC as per manufacturer's instructions on fair faces of brickwork or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. Note: WPC shall be measured and paid separately.

Supply only integral waterproofing compound complete all as specified and directed.

M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 5 mm thick in cement mortar 1:3 on ceiling surfaces finished even & smooth, without using extra cement complete all as specified and directed.

M & L for preperation of newly plastered wall surfaces, ceiling cornices etc, making surface smooth by applying 1 mm thick ready mix putty where ever required and applying two coats of acrylic emulsion exterior paint of approved shade, over a coat of primer, including necessary scaffolding complete all as specified and directed.

M & L for preparation of newly plastered wall surfaces, priming with alkali resistant priming paint, applying 1 mm thick wall care putty wherever required and distempering with two coats of distemper oil emulsion, white or tinted, complete all as specified and directed.

M & L for preparation of newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed.

M & L for complete removal of existing treatment including preperation of old lastered wall surfaces preparatory to distempering, applying 1 mm thick acrylic wall care putty, priming the surface with alkali resistant priming paint and distempering with two coats of distemper oil emulsion, white or tinted complete all as specified and directed.

M & L for preparation of old plastered ceiling surfaces and applying two coats of white wash complete all as specified and directed.

M & L for preparation of old decorative wall surfaces, ceiling cornices etc by brooming, scrapping down dust particle, smoke soot, moulds, moss and efforescent salts etc, making surface smooth by applying ready mix putty where ever required and applying two coats of acrylic emulsion exterior paint complete all as specified and directed.

Dismantling ceiling boards (fibre, pulp , insulation etc.) or insulation boards/ slabs / balnkets any thickness including cover fillets complete all as specified and directed.

M & L for providing 12 mm thick medium density fibre board, exterior grade, fixed in ceiling, flat or sloping, with screws complete all as specified and directed.

M & L for providing anodised aluminium snap grid frame work of 605 x 605 mm grid size for false ceiling complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises to a distance exc 250 m and not exc 1000 m, spread and levelled, complete all as specified and directed.

M & L for 15mm thick screed bed or bedding layer of cement mortar 1:3 for laying floor finishes for kota stone complete all as specified and directed.

M & L for rendering 10 mm thick on fair faces of brick work or concrete vertical surfaces in cement mortar 1:4 complete all as specified and directed.

M & L for providing for non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M & L for providing non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M & L for non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M & L for providing machine cut cudappah stone slab 20 - 25 mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete all as specified and directed.

M & L for providing machine cut kota stone slab flooring 20 - 25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M & L for glazed ceramic coloured tiles in vertical surface, 350 x 250 x 7 mm/ 450 x 350 x 7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Taking down chowkats or frames not exceeding 1.5 sqm each, with shutters (without taking off shutters from the frames) complete all as specified and directed..

Taking down chowkats or frames exceeding 1.5 sqm but not exceeding 4.0 sqm each, with shutters (without taking off shutters from the frames) complete all as specified and directed.

S & F aluminum powder coated window/ ventilator shutter including frame, any type (sliding or open-able) and other similar work etc, fabricated, by using sections, including necessary arrangement to receive 4mm thick sheet glass or wire mesh with aluminium channel beading, stainless steel screws, rollers, maruti lock including the cost of rubber gasket / rubber beading, rollers, maruti lock etc, fixing frames complete all as specified and directed. Note: Weight of rubber gasket / beading rollers, maruti lock will not be measured with weight of aluminium shutter. Note: Sheet glass & wire mesh shall be measured and paid separately.

S & F powder coated aluminium grill of design DG-104 pattern, made out of 10mm dia rod fixed with and including standard aluminium frame of 'F' section of size 23.4 x 15.3 x 1.4 mm thick all as per manufacturer's instructions complete all as specified and directed.

S & F in repairs door closer, hydraulically regulated, designation No. 3, universal type, aluminium (die cast) body, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.

S & F 6.5 mm thick sheet glass, ordinary quality and glazing with oil putty in squares exc 0.5 sq. m in each pane complete all as specified and directed.

S & F 4 mm thick sheet glass, ordinary quality and glazing with oil putty in squares exc 0.5 sq. m in each pane complete all as specified and directed.

S & F 4 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

S & F aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with aluminium wire staples on wooden doors complete all as specified and directed.

S & F aluminium anodised, barrel tower bolts of extruded section and 200 mm length complete all as specified and directed.

S & F extruded aluminium alloy handles, 200 mm long, fabricated type, anodised complete all as specified and directed.

S & F extruded aluminium alloy handles, 100 mm long, fabricated type, anodised complete all as specified and directed.

S & F 100 mm long butt hinges, stainless steel complete all as specified and directed.

S & F floor door stopper of aluminium alloy body and tongue, anodised with hard draw steel spring, 150mm overall length of cover plate complete all as specified and directed.

M & L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for providing 9 mm thick prelaminated particle board, exterior grade, prelaminated both side with decorative choice laminations, fixed with screws to aluminium frame work complete all as specified and directed.

M & L for providing 18 mm thick block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber framed work for kitchen cabinets, cupboards etc, ISI marked complete all as specified and directed.

M & L for providing 0.9 mm thick decorative laminate type I, of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

S & F butt hinges, 50 mm size, extruded brass, with mild steel hinge pin, bright polished, type E-11 complete all as specified and directed.

S & F 100 mm long brass handles, cast type, polished bright for cupboard cabinet etc. complete all as specified and directed.

S & F ball catches with 8 mm dia steel ball, and brass body and striking plate including letting in and fixing complete all as specified and directed.

S & F aluminium mortice lock, 2 levers, vertical type, size 65 mm complete all as specified and directed.

Taking down steel tubing and connections of 15 mm dia bore complete all as specified and directed.

Taking down steel tubing and connections of 20 mm dia bore complete all as specified and directed.

Supplying and laying of CPVC pipes of 20 mm outer dia, SDR 11 & plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and directed.

Supplying and laying of CPVC pipes of 25 mm outer dia, SDR 11 & plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and directed.

Supplying & fixing to walls/chases/ceilings or laying in floors polyethylene - Aluminium Polyethylene (PE-AL-PE) composite pressure pipes of 25mm outer dia including all crimp type internal sealing Plansticmetal Composite fittings (such as elbows, tees, reducers, couplers, short pieces, connectors, etc.) and hooks (in case of concealed pipe work)/ clamps (in case of exposed pipe work) complete all as specified and directed.

S & F in repairs stop valve of PTMT, fancy type, any colour, high pressure, screwed for iron pipe of 15 mm dia bore complete all as specified and directed. (Note: Minimum weight 15mm-90gms/ 20mm- 92gms)

S & F in repairs pillar taps of PTMT, fancy type, any colour, high pressure, screwed for iron pipe of 15 mm dia bore complete all as specified and directed. ( Note: Minimum weight 15mm-110gms)

S & F in repairs bib tap, fancy type, of PTMT, any colour, high pressure, screwed for iron pipe of 15 mm dia bore complete all as specified and directed. (Note: Minimum weight 15mm-90gms/20mm- 125gms)

S & F bib taps, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15mm dia bore complete all as specified and directed.

S & F in repairs 2 in 1 health faucet with hook, chromium plated, with 1.5 m tube complete all as specified and directed.

S & F in repairs swivel shower of PTMT (minimum weight 40gm), any colour for fixing with 15mm dia pipe and shower arm of 15 mm size, 195mm long with 45 degree bend and flange of PTMT any colour complete all as specified and directed.

S & F PVC connections of size 15 mm, 450 mm long with PTMT nuts complete all as specified and directed.

S & F in repairs wash basins, vitreous China, white, flat back, 550 x 400 mm size including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed.

S & F in repairs vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S & F in repairs PVC valveless, syphonic action type, flushing cistern, 10 litre capacity, low level, white, with inlet, ball valve, float and handle including brackets and 32 mm dia flush pipe of polyethylene of low or high density or PVC and connections to pipes and fixing of chain and pull, or lever, if any complete all as specified and directed.

Supply and lay High density polyethylene (HDPE) pipes of pressure rating 6 kgf/cm2 and 50 mm dia bore fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M & L for providing PCC 1:3:6 type C2, 75mm thick using 40mm graded stone aggregate as in plinth protection, finished even and smooth without using extra cement complete all as specified and directed.

M & L for RCC (nominal mix) 1:2:4 type B1 using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings and in shelves and the like complete all as specified and directed.

M & L for providing TMT bars mild steel bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips for stiffner of chainlink fencing complete all as specified and directed.

S & F rolled mild steel Fe-290 (Gde E-165) in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed.

M & L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Dismantling water tanks of capacity 5000 ltr and removing to store complete all as specified and directed.

S & F 5000 litre capacity rotational moulded polyethylene water storage tanks (cylindrical, vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S & F in repairs ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 25 mm dia bore complete all as specified and directed. (minimum weight 25 mm - 455 gm)

S & F ball valves to CPVC pipe of 25 mm dia bore complete all as specified and directed.

S & F in repairs tank adaptor to CPVC pipe of 25 mm dia bore complete all as specified and directed.

INTERNAL ELECTRIFICATION

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. and making good disturbed surfaces of walls, floors, etc to match existing surface complete all as specified and directed.

Taking down DB, main switch, sheet metal enclosure etc complete all as specified and directed.

Taking down submain wiring complete all as specified and directed.

Taking down old exhaust fan any sweep and depositing in MES store yard complete all as specified and directed.

M & L for point wiring complete with 1.5 Sqmm 1100 volts grade single core PVC insulated unsheathed cable with multistranded copper conductor confirming to IS-694, Part II, ISI marked, drawn through and including medium grade PVC conduit of size not less than 25mm dia, ISI marked with all accessories, concealed in wall/ ceiling, sunken switch / terminal box 1.12 mm thick, suitable for 3mm thick laminated hylem sheet or plastic masonite laqminated sheet top cover fixed with chromium plated brass screws for fixing switches, sockets, regulators etc., and including providing 1.5 sqmm 1100 volts grade single core PVC insulated unsheathed cable with multistranded copper conductor in green colour as earth continuity conductor connected to common earth dolly for the following complete all as specified and directed. Note: Quoted rate shall be deemed to be inclusive of cutting chasis in wall/ floor/ ceiling and making good disturbed surface with PCC work and paint etc.

One light point controlled by one switch

One fan/exhaust fan point controlled by one switch

One switch socket combination 3 pin 5 amps on same board

One switch socket combination 3 pin 5 amps on independent board

M & L for point wiring complete with 2.5 Sqmm 1100 volts grade single core PVC insulated unsheathed cable with multistranded copper conductor confirming to IS-694, Part II, ISI marked, drawn through and including medium grade PVC conduit of size not less than 25mm dia, ISI marked with all accessories, concealed in wall/ ceiling, sunken switch / terminal box 1.12 mm thick, suitable for 3mm thick laminated hylem sheet or plastic masonite laqminated sheet top cover fixed with chromium plated brass screws for fixing switches, sockets, regulators etc., and including providing 2.5 sqmm 1100 volts grade single core PVC insulated unsheathed cable with multistranded copper conductor in green colour as earth continuity conductor connected to common earth dolly for one 3 pin 15 Amps switch socket combination on independent board complete all as specified and directed. Note: Quoted rate shall be deemed to be inclusive of cutting chasis in wall/ floor/ ceiling and making good disturbed surface with PCC work and paint etc.

S & F in repairs modular switch 1 way 6A, 1 module, for 230V 50Hz AC supply complete all as specified and directed.

S & F in repairs modular switch 1 way 16A, 1 module, for 230V 50Hz AC supply complete all as specified and directed.

S & F in repairs modular socket 6A, 2/3 pin 2 module, for 230V 50Hz AC supply complete all as specified and directed.

S & F in repairs modular socket 6/16A, 2/3 pin 2 module, for 230V 50Hz AC supply complete all as specified and directed.

S & F in repairs modular fan regulator, eletronic step type, 120 watt, 2 module, for 230V 50Hz AC supply complete all as specified and directed.

S & F in repairs ceiling rose, 3 terminal, PVC polycarbonated isolating body, complete all as specified and directed.

S & F in repairs ceiling fans complete with all accessories, 90- 300 V, maximum 35 watt, 1200 mm sweep with min air delivery 210 CFM, BEE five star rated with brushless direct current (BLDC) motor, including connecting with 3 core flexible wire from ceiling fan to ceiling rose, marking of MES No and depositing old unserviceable ceiling fan in MES store yard complete all as specified and directed. Note: Contractor shall submit warranty/ guarantee cards to Engineer-in-Charge.

S & F in repairs LED tube light fitting 1 X 20 watt, 220V AC, baton integrated LED channel integral sleek extruded polycarbonate LED channel with white acrylic cover alongwith LED tube including connecting with three core flexible copper conductor cable of suitable size from ceiling rose to fitting duly mounted on PVC block with steel screw complete all as specified and directed.

S & F in repairs exhaust fan, 300 mm sweep single phase 230/240 volt AC supply 50 HZ, made of sturdy engineered plastic complete with louvers and shutters, fixed with suitable MS Bracket, nuts, bolts and fixing arrangement, including making/ resizing holes and PCC work as per site requirement complete all as specified and directed.

S & F in repairs LED tube light fitting 1 X 10 watt, 220V AC, baton integrated LED channel integral sleek extruded polycarbonate LED channel with white acrylic cover alongwith LED tube including connecting with three core flexible copper conductor cable of suitable size from ceiling rose to fitting duly mounted on PVC block with steel screw complete all as specified and directed.

S & F in repairs sheet metal enclosure earth plug and socket, triple pole and neutral with three pin including one triple pole MCB 63 Amps 415 Volts complete all as specified and directed.

S & F in repairs sheet metal enclosure for MCB's (D.B), double door, SPN 8 way, with IP-42 protection, suitable for 230 volts 50 Hz AC supply complete all as specified and directed.

S & F in repairs sheet metal enclosure for MCB's (D.B), double door, SPN 4 way with IP-42 protection, suitable for 230 volts 50 Hz AC supply complete all as specified and directed.

S & F in repairs sheet metal enclosure for MCB's (D.B), double door, TPN 4 way, with IP-42 protection, suitable for 415 volts 50 Hz AC supply complete all as specified and directed.

S & F in repairs MCB SPN 32 Amps, 'C' series, suitable for 230 volts 50 Hz AC supply complete all as specified and directed.

S & F in repairs MCB SP 6 to 32 Amps, 'C' series, suitable for 230 volts 50 Hz AC supply complete all as specified and directed.

S & F in repairs MCB FP, 40 to 100 Amps, 'C' series suitable for 415 volts 50 Hz AC supply complete all as specified and directed.

S & F sheet metal enclosure earth plug and socket, single pole and neutral with two pin including one single pole MCB 20 Amps 240 Volts complete all as specified and directed.

S & F in repairs MCCB distribution board (DB), vertical, double door, TPN 4 way, with 200 Amps rated bus bar including MCCB, 125 Amps, 4 pole 16 kA complete all as specified and directed.

S & F in repairs MCCB 3 pole 125 Amps, 415 Volts for 3 phase 50 Hz, 16 kA breaking capacity, Ics=Icu= 100% with thermal, magnetic and microprocessor adjustable type, complete all as specified and directed.

S & F in repairs MCB TP 63 Amps, 'C' series, suitable for 415 volts 50 Hz AC supply complete all as specified and directed.

M & L for submain wiring with two runs of 4 sqmm single core multistranded PVC insulated unsheathed cable 1100 Volts with copper conductor and one run of 4 sqmm single core PVC insulated unsheathed cable 1100 Volts with copper conductor as continuous earth wire drawn through and including rigid PVC conduit of suitable dia concealed in wall/ceiling with all accessories such as tees, elbows, junction boxes, reducers etc as required, connecting to existing main switch board/ distribution board and testing on completion and making good disturbed surfaces and painting to match with existing surface complete all as specified and directed. Note: Two runs of 4 Sqmm cable, one run of 4 Sqmm earth wire and one run of PVC conduit shall be measured as unit run.

M & L for submain wiring with four runs of 6 sqmm single core multistranded PVC insulated unsheathed cable 1100 Volts with copper conductor and one run of 6 sqmm single core PVC insulated unsheathed cable 1100 Volts with copper conductor as continuous earth wire drawn through and including rigid PVC conduit of suitable dia concealed in wall/ceiling with all accessories such as tees, elbows, junction boxes, reducers etc as required, connecting to existing main switch board/ distribution board and testing on completion and making good disturbed surfaces and painting to match with existing surface complete all as specified and directed. Note: Four runs of 6 Sqmm cable, one run of 6 Sqmm earth wire and one run of PVC conduit shall be measured as unit run.

S & F LED building light fitting, 45 watts for 230 V 50HZ AQC supply, suitable for operation over voltage range of 160 V to 260 V duly housed in pressure die cast aluminium housing comprising of LED lamp with individual optical lens, electronic driver with surge protection and PF more than 0.90 confirming to IP 66, rendering colour index of >70 with cool day light output and connecting with existing feeder/ ceiling rose including provn of 1.5 sqmm 3 core copper multistranded conductor cable through and suitable GI bracket with suitable size clamps with bolts, nuts and washers complete all as specified and directed. Make: Bajaj Model BRTFG 45W LED (product code 169799) or equivalent

M & L for earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6.3 mm thick buried directly in ground, earth pit not less than 2.25 m below ground level, with top edge of plate not less than 1.5 m below ground level, connected to 4mm dia GI earth wire by means of bolts, nuts, check nuts and washers of galvanised steel including neccessary earthwork and excavation in any strata, PCC earth chamber in PCC 1:3:6 type C1, 20 mm dia light grade GI pipe for protection of earth strip and GI wire, 15 mm dia light grade GI pipe with funnel for watering, RCC chamber cover etc all as per electrical plate No. 3 of SSR Part-I including connections with earth testing point complete all as specified and directed. Note: On testing after completion if the desired earth resistance is not obtained, earthing shall be redone at no extra cost.

EXTERNAL ELECTRIFICATION

Taking down old LT UG cable of any size or make complete all as specified and directed.

Supplying, laying, jointing, testing and commissioning of LT XLPE insulated, armoured, heavy duty electric cables with multistranded aluminium conductor of 3.5 core, 70 Sqmm, shielded core type wrapped with tape screwed galvanized strip, suitable for earthed system for 1100V, AC 50 cycle including centre glands, lugs, jointing materials etc complete all as specified and directed. Note: Excavation, PCC etc shall be measured and paid separately under relevant items of this schedule.

Supplying, laying, jointing, testing and commissioning of LT XLPE insulated, armoured, heavy duty electric cables with multistranded aluminium conductor of 3.5 core, 35 Sqmm, shielded core type wrapped with tape screwed galvanized strip, suitable for earthed system for 1100V, AC 50 cycle including centre glands, lugs, jointing materials etc complete all as specified and directed. Note: Excavation, PCC etc shall be measured and paid separately under relevant items of this schedule.

Supplying, laying, jointing, testing and commissioning of LT XLPE insulated, armoured, heavy duty electric cables with multistranded aluminium conductor of 2 core, 16 Sqmm, shielded core type wrapped with tape screwed galvanized strip, suitable for earthed system for 1100V, AC 50 cycle including centre glands, lugs, jointing materials etc complete all as specified and directed. Note: Excavation, PCC etc shall be measured and paid separately under relevant items of this schedule.

Supply and laying double wall corrugated (DWC) HDPE pipe of outer dia 50 mm and inner dia of 38/40 mm, made of polyethylene (PE) with smooth internal and profiled external surface, for non pressure, suitable for undergound cables of sizes 95 to 16 sqmm cable including bends, connected coupler fittings for jointing etc complete all as specified and directed. Make: "Rex Polyextrusion Ltd" or equivalent

S & F in repairs 4 pole MCCB busbar box, outdoor, madeout of 3.15 mm thick MS sheet, of suitable size, with 4 Nos Al busbar of 200 Amp capacity including 125 Amps 4 pole MCCB for connecting cables (upto XLPE 3.5 core 95 sqmm as incoming and two outgoing cables upto 95 sqmm including suitable sizes of lugs, glands nuts, bolts & washers with insulation suitable for fixing on ground with suitable angle iron frame above ground level with minimum clearence of 50 cm including excavation & PCC work with clamp, nut & bolt connections complete all as specified and directed.