GE 861 EWS-51/2024-25

Amount

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed by Engineer-in-Charge.

M&L for PCC type D2 (1:4:8) (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed by Engineer-in-Charge.

S&F mild steel work in hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching or wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed by Engineer-in-Charge.

S&F Mild steel nut bolts (machine made) dia of neck in between 11 to 15mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed by Engineer-in-Charge.

S&F Mild steel bars 10mm dia Round bar (as in line wire in chain link fencing and the like), cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed by Engineer-in-Charge.

Supply only Chain link MS galvanised fencing, any size or type complete all as specified and directed by Engineer-in-Charge. Note: The weight of chain link fence shall be ascertained by a Board of Officers to be convened by GE 861 EWS. The contractor shall make all the arragements for weighing the bundles of chain link fence and facilitate the BOO in ascertaining the weight of Chain link fence at site. The actual weight thus obtained shall be measured and paid under this item.

S&F Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of mild steel bar as line wire, staples or steel pins, etc. as directed (each line wire shall be measured and paid separately under respective item) complete all as specified and as directed by Engineer-in-Charge. Note: The weight of barbed wire shall be ascertained by a Board of Officers to be convened by GE 861 EWS. The contractor shall make all the arragements for weighing the bundles of barbed wire and facilitate the BOO in ascertaining the weight of barbed wire at site. The actual weight thus obtained shall be measured and paid under this item.

M&L for preparation of new steel surface of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel (ordinary tint) (each coat) over a coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-In-Charge.

M&L for preparation of new steel surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint, with two coats of synthetic enamel (ordinary tint) (each coat) over a coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-In-Charge.

M&L Point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core multi strand flexible cable maintaining colour coding (Phase- Red/yellow/Blue, Neutral- Black) and 1.5 sqmm PVC insulated unsheathed copper conductor single core cable (green colour) as earth lead in and including PVC casing and capping/Conduit medium grade of suitable size run on wall/surface with all fittings (ISI Marked) controlled by one switch including CI/MS sunk box of required size or PVC Gang Box with 3 mm thick plastic laminated sheet cover of adequate size for one light point/fan point controlled by one switch and making good disturbed surfaces with CM (1:3) to match with the existing surface, complete all as specified and directed by Engr-in-Charge.

All as per srl item No-11 here in above but for one 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5 sqmm size, complete all as specified and directed.

All as per srl item No-11 here in above but for one 3 pin socket outlet, 5 Amps, independent, with cables 1.5 sqmm size, complete all as specified and directed.

All as per srl item No-11 here in above but for one 3 pin socket outlet, 15 Amps on the same board with other switches, with cables 4 sqmm size, complete all as specified and directed.

S&F Modular Switch one way 6 A, 1 module complete all as specified and directed.

S&F Modular Switch one way 16 A, 1 module complete all as specified and directed.

S&F Modular Socket, 6A-2/3 pin combined 2 module complete all as specified and directed.

S&F Modular Socket, 16A-2/3 pin combined 2 module complete all as specified and directed.

S&F Fan step regulator, 120W - 2 module type electronic fan regulator, duly ISI marked with and including connector complete all as specified and directed.

S&F in repair Modular white cover plate with frame, 3 module complete all as specified and directed.

S&F in repair Modular white cover plate with frame, 4 module complete all as specified and directed.

S&F in repair Modular white cover plate with frame, 6 module complete all as specified and directed.

S&F in repair Modular white cover plate with frame, 8 module complete all as specified and directed.

S&F of ceiling rose, 3 phase/PVC/ Polycarbonate, isolated body, complete all as specified and directed.

S&F of Lamp holder (Angular/ Straight), insulated body, with back plate for batten fittings, complete all as specified and directed.

Supply and fixing LED 9 watt complete all as specified and directed.

S&F decorative ultra slim linear LED 20 Watt 4' long lighting fixture with extruded aluminium heat sink, environment friendly, energy efficient ready to use pack including LED tube complete with inbuilt electronic driver, PCB, connector block etc. including connecting up three copper flexible cable from ceiling rose to fittings including connecting up and fixed on and including two nos PVC square boxes of required size complete all as specified and directed.

S&F in repairs sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as specified and directed.

S&F MCB, SP, AC, 240 volts "B" series capacity of 06 to 32 Amps, 10kA and making connections complete all as specified and directed.

S&F MCB, SPN (single pole and neutral), AC, 240 volts, B series capacity 32 Amps 10kA and making connections complete all as specified and directed.

M&L for Earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below Normal ground level steel earth plate connected to GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part-I connecting to main switch board/Main DB's including excavation earth work salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm centre to centre both way with suitable lifting handle and pit/ Chamber in PCC 1:3:6 type C1, angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed.

S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

S&F wall fan 450mm high speed, 230 volts single phase with jerk free oscillation, smooth running, three blades, pull cords including fixing arrangement complete all as specified and directed.

S&F LED Bldg security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with drive, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/65 protection complete all as specified and directed.

S&F 1100 volts grade heavy duty cable PVC insulated aluminium conductor served, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular 10 Sqmm complete all as specified and directed.

BHAT CONSTRUCTIONS AND BUILFERS (BID ID -3127161)

M/S GASSI CONSTRUCTION AND CO (BID ID -3126850)

JANDOO AND CO (BID ID -3116821)

M/S SHEIKH FEROOZ AHMAD (BID ID -3135166)

FIRDOUS AHMAD BABA (BID ID -3135439)

M/S HAFIZ AND SONS (BID ID -3135388)