Karnataka

Active

Works

Buildings

Construction of kanaka Bhavan, Nithyananda Bhavan and Entrance Arch to the Main Road in Kudithini Town and Restoration of Munnithatha Temple in Veni Veerapura village of Sandur Constituency in Ballari Dist

Rural Development and Panchayat Raj Department

RDPR Division Office Ballari | Ballari, Karnataka

Amount: ₹1.3 CrCloses: 14 Jul 20266d left

Tender Value

₹1.3 Cr

EMD Value

₹2.0 L

Closing Date

14 Jul 2026, 10:00 pm6d left

Tender Inviting Organisation

Name

Rural Development and Panchayat Raj Department

Work Description

Construction of kanaka Bhavan, Nithyananda Bhavan and Entrance Arch to the Main Road in Kudithini Town and Restoration of Munnithatha Temple in Veni Veerapura village of Sandur Constituency in Ballari Dist

Tender Information

Tender ID

RDPR/2026-27/BD/WORK_INDENT27613

Reference Number

RDPR/2026-27/BD/WORK_INDENT27613

Tender Type

Open

Product Category

Buildings

Location

RDPR Division Office Ballari

Source Website

Subscribe to view

Documents Required

13 documents required · 13 mandatory

Technical Bid

RequiredValid PWD Registration certificate of Class III or above

RequiredTo qualify for award of this contract, each Tenderer in his name should have in the last five years i.e. 2021-22,2022-23 2023-24, 2024-25 & 2025-26 a achieved in at least two financial years an average annual financial turnover in all classes of civil engineering construction works only usually not less than the estimated annual payments under this contract of Rs.268.16 Lakhs

RequiredTo qualify for award of this contract, each Tenderer in its name should have in the last five years i.e 2021-22,2022-23 2023-24, 2024-25 & 2025-26 executed in any one year, the following minimum quantities of work Earth Work/Embankment 533.00 CUM RCC/PCC 268.00 CUM SSM/BBM 401.00 CUM STEEL 10.45 TONNE Plastering 386.00 SQM Flooring 104.00 Sqm

RequiredWork done certificate for satisfactorily completed as prime contractor, at least one similar work comprising Construction of Building Work costing Rs.67.00 lakhs from competent authorities not below the rank of Executive Engineer or equivalent list of such works in FORMAT-2 in the last five years i.e. 2021-22,2022-23 2023-24, 2024-25 & 2025-26

RequiredThe Unconditional Bankers Certificate of Liquid Assets and or availability of credit facilities of no less than Rs.44.69 Lakhs Credit Lines/letter of credit/ certificates from the banks for meeting the fund requirement etc

RequiredA site engineer having B.E Civil with minimum experience of 5 years in construction or Diploma in Civil Engineering with minimum experience of 8 years in construction

RequiredTenderers who meet the above specified minimum qualifying criteria will only be qualified if their available tender capacity is more than the total tender value The available tender capacity will be calculated as under Assessed available tender capacity AXNX2.5-B

RequiredInformation on Existing commitments and on going works which are yet to be completed

RequiredExisting commitments and ongoing works which are yet to be completed

RequiredThe works for which tender acceptance letters are received are to be furnished

RequiredThe information of the works for which tenderer has already submitted tender are to be furnished.

RequiredThe information on litigation in which the Tenderer is involved are to be furnished.

RequiredName, address, and telephone, telex, and fax numbers of the tenderers bankers who may provide references if contacted by the employer.

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end.

As per Karnataka State Government order No.LD/300/LET/2006 Bangalore Dated 01.01.2007 and Government Letter No.PW/134/BMS/2007 Dated 27.7.2007, a sum amounting to 1%of the bill amount will be deducted towards Construction Labour Welfare fund.

The Item Rate quoted shall include the Royalty Charges on construction materials and other taxes as per prevailing Government Orders.

Conditional tenders will not be accepted.

Financial Year will be reckoned as the period between first day of April and Thirty first day of March of succeeding year (both days inclusive).

The Employer reserves the right to reject any or all Tenders without assigning any reason.

The tenderer should maintain the Road/Building during the defective liability period of one year from the date of completion of the work.

Tenderer shall note that the Tenders of those found Eligible as mentioned in Clause 3 (KW-1,2,3 &4 ) Qualification of the Tenderer in Section 2: Instructions to Tenderers (ITT), will only be considered for evaluation.

The tenderer shall scan & upload all the original documents required for this bid to the e-procurement portal. The Original Documents shall be produced at the time of opening of Bid for physical verification.

The Bidder shall ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date of bid submission.

The contractor should make arrangement for establish mobile quality control lab unit at site itself for conducting quality tests as per requirement at the cost of the contractor

The contractor should submit quality control reports, material test reports and photos along with the bill otherwise bills will not be accepted.

The work will be inspected by the Third party and the bill will be admitted only after the satisfactory quality report from 3rd party.

The contractor should follow items and conditions as specified in standard bid document KW-1-4

Successful bidder submitting bids below the amount put to tender will required to submit the difference amount in the form of FDR/DD Pledge (excluding Bank Guarantee) on the name of EE PRED BELLARY within 20 days from the date of receiving the letter of acceptance. Failing which EMD will be forfeited and further action will be taken as per G O No FD PCL 2008 Bangalore Dated 14/10/2008. Cluase 25 of KW-1,2,3 & 4.

The Contractor Should Submit the MDP Receipts for the Material Used for the Work. Otherwise it will attract the Five times fine as per the Mines and Geology Dept

The Contractor shall pay liquidated damages to the Employer at the rate 0.01 % of Contract price per day stated in the Contract Data for each day that the Completion Date is later than the Intended Completion Date. The total amount of liquidated damages shall not exceed the amount defined in the Contract Data.

Time Period for Completion of Work is 09 Months including Rainy season

Technical Criteria

Capabilities of Vendor

Copy of Registration for having registered in PWD of Class III or above

PWD Registration Certificate (Class I/II/III/IV)

Certificate issued by the competent authority not below the rank of Executive Engineer for having executed in any one year,for a continuous period of 12 months the following minimum quantities of work To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e 2021-22,2022-23 2023-24, 2024-25 & 2025-26 executed in any one year, the following minimum quantities of work Earth Work/Embankment 533.00 CUM RCC/PCC 268.00 CUM SSM/BBM 401.00 CUM STEEL 10.45 TONNE Plastering 386.00 SQM Flooring 104.00 Sqm

Others -- Information in the prescribed format and certificate from the competent authority

Work done certificate for satisfactorily completed as prime contractor, at least one similar work comprising Construction of Building Work costing Rs.67.00 lakhs in Last years 2021-22,2022-23 2023-24, 2024-25 & 2025-26 from competent authorities not below the rank of Executive Engineer or equivalent list of such works in FORMAT-2

Work Done Certificate

Financial Status

To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e. 2021-22,2022-23 2023-24, 2024-25 & 2025-26 a achieved in at least two financial years an average annual financial turnover in all classes of civil engineering construction works only usually not less than the estimated annual payments under this contract of Rs.268.16 Lakhs

Audited CA Certificate of Annual Turnover

The Unconditional Bankers Certificate of Liquid Assets and or availability of credit facilities of no less than Rs.44.69 Lakhs Credit Lines/letter of credit/ certificates from the banks for meeting the fund requirement etc

Line of Credit

Tenderers who meet the above specified minimum qualifying criteria will only be qualified if their available tender capacity is more than the total tender value The available tender capacity will be calculated as under Assessed available tender capacity AXNX2.5-BwhereA is Maximum value of civil engineering works executed in any one year during the last five yearsupdated to price level taking into account the completed as well as works in progressN is Number of years prescribed for completion of the works for which Tenders are invitedB is Value at price level of existing commitments and on-going works to be completed during the next years period of completion of the works for which Tenders are invited

Audited CA Certificate of Annual Turnover

Others

A site engineer having B.E Civil with minimum experience of 5 years in construction or Diploma in Civil Engineering with minimum experience of 8 years in construction.

Others -- Information in the prescribed format supported by Degree/Diploma certificates & experience certificate

Information on Existing commitments and on going works which are yet to be completed

Others -- Information on Existing commitments and on going works which are yet to be completed

Existing commitments and ongoing works which are yet to be completed

Others -- Existing commitments and ongoing works which are yet to be completed

The works for which tender acceptance letters are received are to be furnished

Others -- The works for which tender acceptance letters are received are to be furnished

The information of the works for which tenderer has already submitted tender are to be furnished.

Others -- The information of the works for which tenderer has already submitted tender are to be furnished.

The information on litigation in which the Tenderer is involved are to be furnished.

Others -- The information on litigation in which the Tenderer is involved are to be furnished.

Name, address, and telephone, telex, and fax numbers of the tenderers bankers who may provide references if contacted by the employer.

Others -- Name, address, and telephone, telex, and fax numbers of the tenderers bankers who may provide references if contacted by the employer.

Fee & Financial Details

Tender Fee Amount

₹3,360

EMD Fee Amount

₹2.0 L

Important Dates

Last Activity

30 Jun 2026

Published

30 Jun 2026

Bid Opening

15 Jul 2026

Download Ends

1 Jul 2026

Pre-Bid Meeting

1 Jul 2026

BOQ Preview

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

•

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

•

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) inc...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

•

Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...

•

Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of En...

•

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in...

•

Demolishing R.C.C. work manually/ by mechanical means including stack- ing of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge.

•

Dismantling doors, windows and clerestory windows (steel or wood) shut- ter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of E...

•

Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up...

•

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

•

Providing Chikkaballapura grey coloured granite or equivalent stone 6 SIDE UNPOLISHED GRANITE CUTTING BLOCKS (paper joint 1.5mm), and filling with ALGI NSG 200 as a mortar mixed in the ratio of 1:4 wi...

•

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading...

•

Providing and laying flooring with burnt stone slabs 10 cms thick, rough chistle dressed on sand bed 7.5 cms to 8 cms thick and pointed with cement mortar 1:3, , including cost of materials, sand, lab...

•

Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge.

•

Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 Cum0 (Grade), ...

•

SOUTH ENTRANCE SQURE PILLAR WITH BODHIGE - Providing grey polished granite stone and fixing the stone pillar with carved designs as shown in the diagram. Including cost of all material and labour, fin...

•

KAPOTHA: Providing and fixing of unpolished granite stone beams including kapotha with 2 side negative V-slot locking using Algimicocrete SP fine as mortar, cost of all the material, labour charges, f...

•

DATA RATE FOR BEAM: Providing and fixing of plain polished granite stone beams including cost of all material, labour charges, fixing, lead and lift. (As per the direction of Engineer incharge) Beam 3...

•

DATA FOR SLAB WORK: Providing gray colour semi polished granite and laying 6" thick unpolished granite slab stone including cost of all the material, preparations, labour charges, laying fixing etc.(A...

•

PARAPET BIG CORNER DOMES Providing and fixing the stone parapet corner domes with carved designs as shown in the diagram, including cost of all material and labour, fine finishing, fixing with lead an...

•

PARAPET SMALL SHALE Providing and fixing the polished granite stone parapet shale with carved designs as shown in the diagram. Including cost of all the material and labour, fine finishing, fixing wit...

•

PARAPET SMALL PRABHVALI: Providing and fixing the stone prabhavali with carved designs as shown in the diagram. Including cost of all the material and labour, fine finishing, fixing with lead and lift...

•

PARAPET WORK Providing and fixing the stone praapet wall with carved designs as shown in the diagram. Including cost of all the material and labour, fine finishing, fixing with lead and lift, complete...

•

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

•

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

•

Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even ...

•

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever nec...

•

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

•

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...

•

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...

•

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required shade: New work...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

•

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

•

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...

•

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...

•

Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...

•

Providing and laying Vitrified tiles with thickness 9-10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all col...

•

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of...

•

Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the ...

•

Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 75 x 75 x 65 mm

•

Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 100 x 75 x 65 mm

•

Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 200 x 200 x 65 mm

•

Supplying and fixing PVC/metal conduit Deep junction box 19/20 mm deep Junction box

•

Supplying and fixing PVC/metal conduit Deep junction box 25 mm deep Junction box

•

Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete. upto 50 mm conduit in brick wall

•

Supplying And Fixing Metal Fan Box with Round Hook.

•

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16A One Way Switch

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket

•

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

•

Supplying and fixing regular MCB distribution boards on wall/wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 ...

•

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball be...

•

Supplying of .....feet -PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI Lessthan 80. Power Input: 220-240V@ 50...

•

Supplying & Fixing of 70-150 W lamp holder 2 Pin

•

Fixing all types and all capacities of fluorescent / falseceiling /spotlight/CFL/LED fittings indoor on the wall/ceiling/ rafters/ girders using 23/0.0076"twin twisted PVC insulated wires, required No...

•

Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

kw-4 27613.docx

Tender Document • 0.13 MB

Ready to Participate?

Download all tender documents and submit your bid