REPAIR/ MAINT OF ALL TYPE CHAIR VERANDAH AND ALMIRAH STEEL OF OFFICERS AND JCO/ORs MARRIED ACCN AND OTM UNDER BSO (S) OF GE (SOUTH) DELHI CANTT-10

Amount

Notes:- 1:- Removal of Existing componants of following MES Pattern Furniture Item's Carefully without disturbing the Adjoining Parts and S&F New Componants of same pattern as per Drg in lieu of Dismantled /Discorded componants including Tighting the Joints, Pinning ,Screwing, wedging, Gluing, Providing Hinges, Placing every part in - tact condition. 2:- Cleaning,Derusting of Stain/Dirt Sand Paper making the Surface smooth filling the holes with putty whereever required and Applying and two coat of synthetic Enalmel Paint White /Black or any colour as directed by Engineer-in-charge. 3:-.Replaced/ Changed parts should be First finished seperately upto the level /extent so that the Painting on whole Items should be matched and desired level . 4:-Work will be executed where the Furniture Item's exist in different user unit's of BSO GE ( South) New Delhi including Furniture yard of BSO's Sub Division & Issued to work shop of contractor as per reqment if required to Engineer-in-Charge for proper excecution of work.

Chair Verandah

M&L for cutting and Removing of Old Cane from Chair verandah and removing the dirt and rust from sand paper filling the holes with putty and applying one coat of synthetic enamel white paint Re-canning in with cane plastic 04 to 05 mm wide and 0.5 mm thick as approved (Make of Plastic cane : Aryan/Shah/Premier). complete all as shown on drawing and directed. (Drg No - FD-359)

M&L for cutting and Removing of Old Newar from Chair verandah and removing the dirt and rust from sand paper filling the holes with putty and applying one coat of synthetic enamel white paint Reweaving the Chair Verandah with New 50-55mm wide virgin quality pure white PVC Newar weaved in V-shape (not made out of recycled material) of approved quality closely inter-knitted from both sides and all joints must be stiched with nylon thread duly covered with a piece of leathrite suitable size complete all as specified & driected complete all as shown on drawing and directed. (Quality of PVC Newar : Exclusively as per sample kept with BSO GE (S) Delhi Cantt) (Drg No - FD-256)

M&L for removing the dirt and rust from sand paper filling the holes with putty and applying one coat of synthetic enamel paint Black paint on whole chair as directed by Engineer-in-Charge. (Drg No - FD-FD/E6/MAP/II)

Removing the old broken MS Strip of Chair and S&F new MS Strip 3 mmThick dully painted with synthetic enamel paint Black paint directed by Engineer-in-Charge. (Drg No. FD/E6/MAP/II)

M&L for welding to broken joints of all type of Chair varandah as specified above as directed by Engineer-in-charge.

Removing of old unserviceable Rubber shoes from all types of chair verandah and S&F new PVC/Hard Rubber shoes of superior quality as specified in drawings and directed by Engineer-in-charge.

Almirah Large Steel /Almirah Medium Steel /Almirah 1/2 H x 1/2 S steel (Drg No. FD-67(M),351, 339,1031,350, 1032,114,1033)

Removing of unsv Handle from All Types of Almirah and S&F New Handle stainless steel 100 to 125 mm Long including Nut and Bolt with Washer complete as per existing shape and size as per Drg.

Removing of unsv Lock from All Types of Almirah and S&F New Lock with Duplicate Key Make:- Godrej/Harrisson/Link or any others make as approved by engineer- in-charge as per requirements of site complete as per existing shape and size as per Drg.

Removing of unsv Drawer Lock from Almirah Steel 1/2 H 1/2 S and S&F New Drawer Lock with Duplicate Key Make:- Godrej/Harrisson/Link or any others make as approved by engineer- in-charge as per requirements of site complete as per existing shape and size as per Drg.

Removing of unsv Butt Hinges from All Types of Almirah and S&F New Butt Hinges complete as per existing shape and size as per Drg.

Removing of unsv Rusted Each pairs of Legs of All Types of Almirah and S&F New Legs dully Painted complete as per existing shape and size as per Drg.

Removing of unsv /Rusted Shelves of All Types of Almirah and S&F New Shelves dully Painted complete as per existing shape and size as per Drg.

M&L for adjustment of existing shelves by providing New clamps/clips after removing the old unsv clamps/clips as per existing shape and size as per drg.

Removing of old unsv/rusted three way locking device and S&F new locking device complete as per existing shape and size as per drg.

Removing of old unsv missing hanging Rod from Almirah 1/2 Hx1/2 S and supply and fixing new hanging Rod as per existing shape and size as per drg.

Removing of old unsv , missing Lock cover and S&F new lock cover inside of Almirah as per existing shape and size as per drg.

M&L for removig of old paint of Almirah Large with paint remover or with solvent and making the surface smooth by rubbing it with emery paper filling the holes with putty and applying one coat of red oxide primer after this external and internal surface of almirah should be painted with two coat of synthetic enamel paint shade of door(internal & external) should be different from shade of remaining almirah rest all as directed .

All same as per item no 3.11 above but Almirah Medium steel.

All same as per item no 3.11 above but Almirah Large 1/2 X 1/2 S steel.

Locker Bed Side Steel (Drg No. FD-1029/257)

Removing of unsv Handle and S&F New Handle 100 mm long Stainless Steel including Nut and Bolt with Washer complete as per existing shape and size as per Drg.

Removing of unsv Butt Hinges and S&F New Butt Hinges complete as per existing shape and size as per Drg.

Removing of unsv Hasp and Staple and S&F New Hasp and Staple complete as per existing shape and size as per Drg.

Removing of unsv Hanging Rod of and S&F New Hanging Rod complete as per existing shape and size as per Drg.

Removing of unsv Rusted Each pairs of Legs of All Types of Locker and S&F New Legs dully Painted complete as per existing shape and size as per Drg.

Removing of unsv /Rusted Shelves of Locker Bed side steel and S&F New Shelves dully Painted complete as per existing shape and size as per Drg.

M&L for removig of old paint of Locker Steel with paint remover or with solvent and making the surface smooth by rubbing it with emery paper filling the holes with putty and applying one coat of red oxide primer after this external and internal surface of almirah should be painted with two coat of synthetic enamel paint shade of door(internal & external) should be different from shade of remaining almirah rest all as directed.

Teapoy Varandah (Drg No. FD-35,208,255)

Removing of old unserviceable top of table & S&F new table top of 18-19 mm thick particle board exterior grade (Make:- Archid/Action Tesa/Century/Greenlam/Kitply) duly post -formed with 0.6mm thick laminate in colour/shade as approved by GE 0.8 mm thick PVC edging of shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine as specified and directed.

Removing of old unsv Legs and S&F new Legs of 20 mm dia MS conduit pipe as per Drg.

Removing of old unsv Frame and S&F new Frame of 25mmx03mm Flat Iron as per Drg.

Removing of old unsv stiffner and S&F new stiffner of conduit pipe as per Drg.

Removing of old unsv Shoes/Toes and S&F new Hard Rubber/PVC Shoes Toes as per Drg

Painting of Teapoy Varandah as per Drg complete.

Note:- The contract sum shall be after deducting the amount of Credit shown in Credit Schedule of this Tender.

SKYLIGHT INNOVATIONS

SMS Enterprises