MTPS I M II Circle CHP I Fabrication and Erection of lamp post laying of 4C X 35 Sq mm cable and providing lamp with fittings in between Railway track Road No 6 and 7 for improving illumination

Amount

Earth work excavating the hard red & stoney earth & depositing on bank for laying of LT cable, and covering the cables with LT V Trough and refilling the earth for a distance of 720 mtrs in between track No. 6 & 7.

Laying of 4C X 35 Sq.mm LTUG Aluminium armoured cable in the ground to a length of 720mtrs in railway track.

Glanding & Termination charges for 4C X 35 sq.mm LTUG Aluminium armoured cable at 12 Nos. lighting post.

Laying of 2C X 2.5 Sq.mm flexible copper cable in lamp post.

Glanding & Termination charges for 2C X 2.5sq.mm LTUG Aluminium armoured cable at 12 Nos. lighting post.

Erection of 20W street light fittings in the lamp post with proper electrification by using 2.5 sq. mm. copper cable to light up the fittings.

Dismantling the existing plain cement concrete, disposing away from the site as directed by the department Engineer in - charge including cost of all labour charges, lead, lift, etc., complete

Earth work excavation in all types of soils except hard rock requiring balasting without damaging the nearby structure and dumping nearby the with head load of 10m and lift of 2m. This rate is inclusive of all cost of materials, lead, lift, etc., complete.

Providing PCC 1:2:3 mix using cement 324 Kg/m3 with 20mm HB stone for leveling course and as directed by the department engineer at site, including shuttering charges, cost of all materials labour, lead, lift, curing etc., complete.

Refilling with excavated sand complying with standard specification for filling in foundation and basement

Charges for excavation the earth, erection of earth rod in the pit, filling with char coal, brick and common salt in the earth pit, connect the clamps in the earth pit.

Charges for erection of new piller box on the structure/coloumn connecting existing cbale in the new box.

Loading, Transporting and unloading of 4C X 35 sq.mm.LTUG. Aluminium armoured cable drum-2 Nos., MS Pipes, MS Angles and Channels-1 set from Central stores /MTPS-I to Railway track/ CHP-I.

Charges for fabrication of 3.5 mtrs. lamp post with cross arm bracket and painting with one coat of red oxide paint and two coats aluminium paint and fixing of Junction box. (Necessary pipes, channels and angles will be supplied by Board at free of cost)

Charges for removing and refilling of hard broken stone ballast along the sides of the railway track for excavation of earth.

Charges for laying GI wire

Charges for providing LT V Trough on the cable for 720 mtrs.

Hire charges for T&P’s and charges for consumables for Sl.No.1 to 17.

MATERIAL PORTION: 20W LED street light fittings with pipe. Make : Philips / HPL / Bajaj / Havells/ Crompton Power : 20 W LED Efficiancy : > 120 lm/w Driver surge Protection : 4 KV Protection Protection : IP 65, Short circuit and High voltage Driver Efficiency : 85 % Harmonic distortion : <10% Power factor : > 0.95 Burning Hours : >50,000 hours Protection of Over voltage protection: 320 V AC +20 V Beam angle : 120 degree Mounting: Pole mounting comprising of LED chips directly mounted on Die cast aluminum housing covered with Toughened glass and FR4 PCB for LED chips

2C x 2.5 sq mm, Multistrand Armored Copper FRLS, 1100 volt Grade flexible Cable.

LT V Trough

PVC rigid bend 2”

PVC coupling 2”

8 SWG GI wire

MS Junction box of size 300 x300 x 150 x 1.5 mm with 5A fuse carrier and connector.

MS Junction box of size 300 x 300 x 150 x 1.5 mm with 63A MCB

63A TPN switch with sheet metal enclosure mounted properly inside the pillar box.

Material charges for erection of 2 Nos. earth pit and 1 No. pillar box.

R K ELECTRICALS