Improving of Learning space at MS Boh

Providing and fixing seasoned popular wood for truss components like Rafter, Tie beam, supports and purlins incl. all nails and fixtures complete job.

Providing and fixing 10mm thick plywood for ceiling and soffits incl. supporting materials, nails, cornice, primer and two coats of paint complete job. (supporting material of popular wood work as per directions of EIC

Providing and fixing colour coated Gi sheet Eaves boarding of 250 mm wide and 0.4mm thick incl frame work with all necessary fittings, Nails complete job.

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I.limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2

Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of : G.S. Sheet

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand 4 graded stone aggregate) finished with floating coat of neat cement including cement slurry and curing complete 40 mm thick with 20mm nominal size stone aggregate

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : 30 mm Ist class imported kail wood