Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | l1₹5.0 LAccepted-Finance | l1 | Accepted-Finance l1 | |
| 2 | l2₹5.2 L+₹12,885 (2.56%)Accepted-Finance | l2 | Accepted-Finance l2 |
Tender Value
Refer Docs
Closing Date
2 Jan 2023, 4:00 pmClosed
Executive Engineer CD-II Leh PDC
Executive Engineer CD-II Leh PDC
Minor repairing and replacement of sanitary fittings and other allied works in division office and Xen quarter and other allied works at Choglamsar
2022_PDNRE_8725_4
NIT-37 CD-II/PDC/L/2022-23
Open Tender
Civil Works - Others
Item Rate
120 days
Choglamsar
Please refer Tender documents.
3 documents required · 3 mandatory
₹100
Payable To Pay and Accounts Officer PDC Leh
Exempted
3 Jan 2023
2 Jan 2023
3 Jan 2023
2 Jan 2023
2 Jan 2023
2 Jan 2023
Amount
Earthwork in excavation by Mechanical means (Hydraulic excavator) in trenches for foundation, drians, pipes, cables etc., not exceeding 1.5m in width and for shafts wells, cesspits and the like not exceeding 10sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5m, including getting out excavated earth and disposal of surplus excavated earth as directed, within lead of 50meters, In all kinds of Soil
Earthwork in excavation by Manual means in trenches for foundation, drians, pipes, cables etc., not exceeding 1.5m in width and for shafts wells, cesspits and the like not exceeding 10sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5m, including getting out excavated earth and disposal of surplus excavated earth as directed, within lead of 50meters In all kinds of Soil
Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil.
Providing Glass wool 50 mm thick resin bonded density 24 Kg/m3 with chicken mesh, binding wire, wrapping of polthene sheet (120 GSM) and Aluminium sheet 18 guage all around the pipe including cost of all labour charges complete job.
Providing and fixing polyethelene aluminium polyethelene (PE-AL-PE) composite pressure pipes conforming to IS 15450 UV stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature upto 80degree including all special fittings of composite material (engineering plastic blend and brass inserts whereever required) eg elbows, tees, reducers, couplers and connectors etc. with clamps at one metre spacing. This includes testing of joints complete as per directions of the engineer-in-charge
Providing and fixing PTMT waste coupling for wash basin and sink of approved quality and colour
Providing and fixing PTMT bottle trap for wash basin and sink. Bottle trap 38mm single piece moulded with height of 270mm effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 263 gms
Providing and fixing PVC waste pipe for sink and washbasin including PVC waste fittings complete 32mm diameter
Providing and fixing of 20mm diameter brass bib cock
Providing and fixing of piller cock CP brass basin mixed pillar tap 150mm
Providing and fixing uplasticised PVC connection pipe with brass s 15 mm dia
Supply and fixing of wall to wall carpet non dust carpet along with the thermocol form for winter purpose and double kaleen by fixing with adersive solution: Living Room, Bed Room -I and Bed Room-2 carpeting with thermocol
Wall to wall Carpeting (kaleen type)
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid. 10 liter low level white vitreous china flushing cistern and CP flush bend with fittings and C.I. brackets. 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets. cutting and making walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid.
Providing and fixing PTMT bottle trap for wash basin and sink. Bottle trap 38mm single piece moulded with height of 270mm effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 263 gms
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.. Group B
Cement plaster in fine sand (internal plaster are for height upto 10m from ground level unless otherwise stated.) 12mm cement plaster mix: 1:4 (1 cement : 4 fine sand)
M/S TSEWANG LOBZANG
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .